conn reset on neighbor stall, neighbor free
[cor_2_6_31.git] / drivers / atm / ambassador.h
blobbd1c46a7ef49de51282303bc3ed9b78d3a8669dd
1 /*
2 Madge Ambassador ATM Adapter driver.
3 Copyright (C) 1995-1999 Madge Networks Ltd.
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
20 system and in the file COPYING in the Linux kernel source.
23 #ifndef AMBASSADOR_H
24 #define AMBASSADOR_H
27 #ifdef CONFIG_ATM_AMBASSADOR_DEBUG
28 #define DEBUG_AMBASSADOR
29 #endif
31 #define DEV_LABEL "amb"
33 #ifndef PCI_VENDOR_ID_MADGE
34 #define PCI_VENDOR_ID_MADGE 0x10B6
35 #endif
36 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR
37 #define PCI_DEVICE_ID_MADGE_AMBASSADOR 0x1001
38 #endif
39 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR_BAD
40 #define PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD 0x1002
41 #endif
43 // diagnostic output
45 #define PRINTK(severity,format,args...) \
46 printk(severity DEV_LABEL ": " format "\n" , ## args)
48 #ifdef DEBUG_AMBASSADOR
50 #define DBG_ERR 0x0001
51 #define DBG_WARN 0x0002
52 #define DBG_INFO 0x0004
53 #define DBG_INIT 0x0008
54 #define DBG_LOAD 0x0010
55 #define DBG_VCC 0x0020
56 #define DBG_QOS 0x0040
57 #define DBG_CMD 0x0080
58 #define DBG_TX 0x0100
59 #define DBG_RX 0x0200
60 #define DBG_SKB 0x0400
61 #define DBG_POOL 0x0800
62 #define DBG_IRQ 0x1000
63 #define DBG_FLOW 0x2000
64 #define DBG_REGS 0x4000
65 #define DBG_DATA 0x8000
66 #define DBG_MASK 0xffff
68 /* the ## prevents the annoying double expansion of the macro arguments */
69 /* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
70 #define PRINTDB(bits,format,args...) \
71 ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
72 #define PRINTDM(bits,format,args...) \
73 ( (debug & (bits)) ? printk (format , ## args) : 1 )
74 #define PRINTDE(bits,format,args...) \
75 ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
76 #define PRINTD(bits,format,args...) \
77 ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )
79 #else
81 #define PRINTD(bits,format,args...)
82 #define PRINTDB(bits,format,args...)
83 #define PRINTDM(bits,format,args...)
84 #define PRINTDE(bits,format,args...)
86 #endif
88 #define PRINTDD(bits,format,args...)
89 #define PRINTDDB(sec,fmt,args...)
90 #define PRINTDDM(sec,fmt,args...)
91 #define PRINTDDE(sec,fmt,args...)
93 // tunable values (?)
95 /* MUST be powers of two -- why ? */
96 #define COM_Q_ENTRIES 8
97 #define TX_Q_ENTRIES 32
98 #define RX_Q_ENTRIES 64
100 // fixed values
102 // guessing
103 #define AMB_EXTENT 0x80
105 // Minimum allowed size for an Ambassador queue
106 #define MIN_QUEUE_SIZE 2
108 // Ambassador microcode allows 1 to 4 pools, we use 4 (simpler)
109 #define NUM_RX_POOLS 4
111 // minimum RX buffers required to cope with replenishing delay
112 #define MIN_RX_BUFFERS 1
114 // minimum PCI latency we will tolerate (32 IS TOO SMALL)
115 #define MIN_PCI_LATENCY 64 // 255
117 // VCs supported by card (VPI always 0)
118 #define NUM_VPI_BITS 0
119 #define NUM_VCI_BITS 10
120 #define NUM_VCS 1024
122 /* The status field bits defined so far. */
123 #define RX_ERR 0x8000 // always present if there is an error (hmm)
124 #define CRC_ERR 0x4000 // AAL5 CRC error
125 #define LEN_ERR 0x2000 // overlength frame
126 #define ABORT_ERR 0x1000 // zero length field in received frame
127 #define UNUSED_ERR 0x0800 // buffer returned unused
129 // Adaptor commands
131 #define SRB_OPEN_VC 0
132 /* par_0: dwordswap(VC_number) */
133 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/
134 /* flags: */
136 /* LANE: 0x0004 */
137 /* NOT_UBR: 0x0008 */
138 /* ABR: 0x0010 */
140 /* RxPool0: 0x0000 */
141 /* RxPool1: 0x0020 */
142 /* RxPool2: 0x0040 */
143 /* RxPool3: 0x0060 */
145 /* par_2: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
147 #define SRB_CLOSE_VC 1
148 /* par_0: dwordswap(VC_number) */
150 #define SRB_GET_BIA 2
151 /* returns */
152 /* par_0: dwordswap(half BIA) */
153 /* par_1: dwordswap(half BIA) */
155 #define SRB_GET_SUNI_STATS 3
156 /* par_0: dwordswap(physical_host_address) */
158 #define SRB_SET_BITS_8 4
159 #define SRB_SET_BITS_16 5
160 #define SRB_SET_BITS_32 6
161 #define SRB_CLEAR_BITS_8 7
162 #define SRB_CLEAR_BITS_16 8
163 #define SRB_CLEAR_BITS_32 9
164 /* par_0: dwordswap(ATMizer address) */
165 /* par_1: dwordswap(mask) */
167 #define SRB_SET_8 10
168 #define SRB_SET_16 11
169 #define SRB_SET_32 12
170 /* par_0: dwordswap(ATMizer address) */
171 /* par_1: dwordswap(data) */
173 #define SRB_GET_32 13
174 /* par_0: dwordswap(ATMizer address) */
175 /* returns */
176 /* par_1: dwordswap(ATMizer data) */
178 #define SRB_GET_VERSION 14
179 /* returns */
180 /* par_0: dwordswap(Major Version) */
181 /* par_1: dwordswap(Minor Version) */
183 #define SRB_FLUSH_BUFFER_Q 15
184 /* Only flags to define which buffer pool; all others must be zero */
185 /* par_0: dwordswap(flags<<16) or wordswap(flags)*/
187 #define SRB_GET_DMA_SPEEDS 16
188 /* returns */
189 /* par_0: dwordswap(Read speed (bytes/sec)) */
190 /* par_1: dwordswap(Write speed (bytes/sec)) */
192 #define SRB_MODIFY_VC_RATE 17
193 /* par_0: dwordswap(VC_number) */
194 /* par_1: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
196 #define SRB_MODIFY_VC_FLAGS 18
197 /* par_0: dwordswap(VC_number) */
198 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/
200 /* flags: */
202 /* LANE: 0x0004 */
203 /* NOT_UBR: 0x0008 */
204 /* ABR: 0x0010 */
206 /* RxPool0: 0x0000 */
207 /* RxPool1: 0x0020 */
208 /* RxPool2: 0x0040 */
209 /* RxPool3: 0x0060 */
211 #define SRB_RATE_SHIFT 16
212 #define SRB_POOL_SHIFT (SRB_FLAGS_SHIFT+5)
213 #define SRB_FLAGS_SHIFT 16
215 #define SRB_STOP_TASKING 19
216 #define SRB_START_TASKING 20
217 #define SRB_SHUT_DOWN 21
218 #define MAX_SRB 21
220 #define SRB_COMPLETE 0xffffffff
222 #define TX_FRAME 0x80000000
224 // number of types of SRB MUST be a power of two -- why?
225 #define NUM_OF_SRB 32
227 // number of bits of period info for rate
228 #define MAX_RATE_BITS 6
230 #define TX_UBR 0x0000
231 #define TX_UBR_CAPPED 0x0008
232 #define TX_ABR 0x0018
233 #define TX_FRAME_NOTCAP 0x0000
234 #define TX_FRAME_CAPPED 0x8000
236 #define FP_155_RATE 0x24b1
237 #define FP_25_RATE 0x1f9d
239 /* #define VERSION_NUMBER 0x01000000 // initial release */
240 /* #define VERSION_NUMBER 0x01010000 // fixed startup probs PLX MB0 not cleared */
241 /* #define VERSION_NUMBER 0x01020000 // changed SUNI reset timings; allowed r/w onchip */
243 /* #define VERSION_NUMBER 0x01030000 // clear local doorbell int reg on reset */
244 /* #define VERSION_NUMBER 0x01040000 // PLX bug work around version PLUS */
245 /* remove race conditions on basic interface */
246 /* indicate to the host that diagnostics */
247 /* have finished; if failed, how and what */
248 /* failed */
249 /* fix host memory test to fix PLX bug */
250 /* allow flash upgrade and BIA upgrade directly */
251 /* */
252 #define VERSION_NUMBER 0x01050025 /* Jason's first hacked version. */
253 /* Change in download algorithm */
255 #define DMA_VALID 0xb728e149 /* completely random */
257 #define FLASH_BASE 0xa0c00000
258 #define FLASH_SIZE 0x00020000 /* 128K */
259 #define BIA_BASE (FLASH_BASE+0x0001c000) /* Flash Sector 7 */
260 #define BIA_ADDRESS ((void *)0xa0c1c000)
261 #define PLX_BASE 0xe0000000
263 typedef enum {
264 host_memory_test = 1,
265 read_adapter_memory,
266 write_adapter_memory,
267 adapter_start,
268 get_version_number,
269 interrupt_host,
270 flash_erase_sector,
271 adap_download_block = 0x20,
272 adap_erase_flash,
273 adap_run_in_iram,
274 adap_end_download
275 } loader_command;
277 #define BAD_COMMAND (-1)
278 #define COMMAND_IN_PROGRESS 1
279 #define COMMAND_PASSED_TEST 2
280 #define COMMAND_FAILED_TEST 3
281 #define COMMAND_READ_DATA_OK 4
282 #define COMMAND_READ_BAD_ADDRESS 5
283 #define COMMAND_WRITE_DATA_OK 6
284 #define COMMAND_WRITE_BAD_ADDRESS 7
285 #define COMMAND_WRITE_FLASH_FAILURE 8
286 #define COMMAND_COMPLETE 9
287 #define COMMAND_FLASH_ERASE_FAILURE 10
288 #define COMMAND_WRITE_BAD_DATA 11
290 /* bit fields for mailbox[0] return values */
292 #define GPINT_TST_FAILURE 0x00000001
293 #define SUNI_DATA_PATTERN_FAILURE 0x00000002
294 #define SUNI_DATA_BITS_FAILURE 0x00000004
295 #define SUNI_UTOPIA_FAILURE 0x00000008
296 #define SUNI_FIFO_FAILURE 0x00000010
297 #define SRAM_FAILURE 0x00000020
298 #define SELF_TEST_FAILURE 0x0000003f
300 /* mailbox[1] = 0 in progress, -1 on completion */
301 /* mailbox[2] = current test 00 00 test(8 bit) phase(8 bit) */
302 /* mailbox[3] = last failure, 00 00 test(8 bit) phase(8 bit) */
303 /* mailbox[4],mailbox[5],mailbox[6] random failure values */
305 /* PLX/etc. memory map including command structure */
307 /* These registers may also be memory mapped in PCI memory */
309 #define UNUSED_LOADER_MAILBOXES 6
311 typedef struct {
312 u32 stuff[16];
313 union {
314 struct {
315 u32 result;
316 u32 ready;
317 u32 stuff[UNUSED_LOADER_MAILBOXES];
318 } loader;
319 struct {
320 u32 cmd_address;
321 u32 tx_address;
322 u32 rx_address[NUM_RX_POOLS];
323 u32 gen_counter;
324 u32 spare;
325 } adapter;
326 } mb;
327 u32 doorbell;
328 u32 interrupt;
329 u32 interrupt_control;
330 u32 reset_control;
331 } amb_mem;
333 /* RESET bit, IRQ (card to host) and doorbell (host to card) enable bits */
334 #define AMB_RESET_BITS 0x40000000
335 #define AMB_INTERRUPT_BITS 0x00000300
336 #define AMB_DOORBELL_BITS 0x00030000
338 /* loader commands */
340 #define MAX_COMMAND_DATA 13
341 #define MAX_TRANSFER_DATA 11
343 typedef struct {
344 __be32 address;
345 __be32 count;
346 __be32 data[MAX_TRANSFER_DATA];
347 } transfer_block;
349 typedef struct {
350 __be32 result;
351 __be32 command;
352 union {
353 transfer_block transfer;
354 __be32 version;
355 __be32 start;
356 __be32 data[MAX_COMMAND_DATA];
357 } payload;
358 __be32 valid;
359 } loader_block;
361 /* command queue */
363 /* Again all data are BIG ENDIAN */
365 typedef struct {
366 union {
367 struct {
368 __be32 vc;
369 __be32 flags;
370 __be32 rate;
371 } open;
372 struct {
373 __be32 vc;
374 __be32 rate;
375 } modify_rate;
376 struct {
377 __be32 vc;
378 __be32 flags;
379 } modify_flags;
380 struct {
381 __be32 vc;
382 } close;
383 struct {
384 __be32 lower4;
385 __be32 upper2;
386 } bia;
387 struct {
388 __be32 address;
389 } suni;
390 struct {
391 __be32 major;
392 __be32 minor;
393 } version;
394 struct {
395 __be32 read;
396 __be32 write;
397 } speed;
398 struct {
399 __be32 flags;
400 } flush;
401 struct {
402 __be32 address;
403 __be32 data;
404 } memory;
405 __be32 par[3];
406 } args;
407 __be32 request;
408 } command;
410 /* transmit queues and associated structures */
412 /* The hosts transmit structure. All BIG ENDIAN; host address
413 restricted to first 1GByte, but address passed to the card must
414 have the top MS bit or'ed in. -- check this */
416 /* TX is described by 1+ tx_frags followed by a tx_frag_end */
418 typedef struct {
419 __be32 bytes;
420 __be32 address;
421 } tx_frag;
423 /* apart from handle the fields here are for the adapter to play with
424 and should be set to zero */
426 typedef struct {
427 u32 handle;
428 u16 vc;
429 u16 next_descriptor_length;
430 u32 next_descriptor;
431 #ifdef AMB_NEW_MICROCODE
432 u8 cpcs_uu;
433 u8 cpi;
434 u16 pad;
435 #endif
436 } tx_frag_end;
438 typedef struct {
439 tx_frag tx_frag;
440 tx_frag_end tx_frag_end;
441 struct sk_buff * skb;
442 } tx_simple;
444 #if 0
445 typedef union {
446 tx_frag fragment;
447 tx_frag_end end_of_list;
448 } tx_descr;
449 #endif
451 /* this "points" to the sequence of fragments and trailer */
453 typedef struct {
454 __be16 vc;
455 __be16 tx_descr_length;
456 __be32 tx_descr_addr;
457 } tx_in;
459 /* handle is the handle from tx_in */
461 typedef struct {
462 u32 handle;
463 } tx_out;
465 /* receive frame structure */
467 /* All BIG ENDIAN; handle is as passed from host; length is zero for
468 aborted frames, and frames with errors. Header is actually VC
469 number, lec-id is NOT yet supported. */
471 typedef struct {
472 u32 handle;
473 __be16 vc;
474 __be16 lec_id; // unused
475 __be16 status;
476 __be16 length;
477 } rx_out;
479 /* buffer supply structure */
481 typedef struct {
482 u32 handle;
483 __be32 host_address;
484 } rx_in;
486 /* This first structure is the area in host memory where the adapter
487 writes its pointer values. These pointer values are BIG ENDIAN and
488 reside in the same 4MB 'page' as this structure. The host gives the
489 adapter the address of this block by sending a doorbell interrupt
490 to the adapter after downloading the code and setting it going. The
491 addresses have the top 10 bits set to 1010000010b -- really?
493 The host must initialise these before handing the block to the
494 adapter. */
496 typedef struct {
497 __be32 command_start; /* SRB commands completions */
498 __be32 command_end; /* SRB commands completions */
499 __be32 tx_start;
500 __be32 tx_end;
501 __be32 txcom_start; /* tx completions */
502 __be32 txcom_end; /* tx completions */
503 struct {
504 __be32 buffer_start;
505 __be32 buffer_end;
506 u32 buffer_q_get;
507 u32 buffer_q_end;
508 u32 buffer_aptr;
509 __be32 rx_start; /* rx completions */
510 __be32 rx_end;
511 u32 rx_ptr;
512 __be32 buffer_size; /* size of host buffer */
513 } rec_struct[NUM_RX_POOLS];
514 #ifdef AMB_NEW_MICROCODE
515 u16 init_flags;
516 u16 talk_block_spare;
517 #endif
518 } adap_talk_block;
520 /* This structure must be kept in line with the vcr image in sarmain.h
522 This is the structure in the host filled in by the adapter by
523 GET_SUNI_STATS */
525 typedef struct {
526 u8 racp_chcs;
527 u8 racp_uhcs;
528 u16 spare;
529 u32 racp_rcell;
530 u32 tacp_tcell;
531 u32 flags;
532 u32 dropped_cells;
533 u32 dropped_frames;
534 } suni_stats;
536 typedef enum {
537 dead
538 } amb_flags;
540 #define NEXTQ(current,start,limit) \
541 ( (current)+1 < (limit) ? (current)+1 : (start) )
543 typedef struct {
544 command * start;
545 command * in;
546 command * out;
547 command * limit;
548 } amb_cq_ptrs;
550 typedef struct {
551 spinlock_t lock;
552 unsigned int pending;
553 unsigned int high;
554 unsigned int filled;
555 unsigned int maximum; // size - 1 (q implementation)
556 amb_cq_ptrs ptrs;
557 } amb_cq;
559 typedef struct {
560 spinlock_t lock;
561 unsigned int pending;
562 unsigned int high;
563 unsigned int filled;
564 unsigned int maximum; // size - 1 (q implementation)
565 struct {
566 tx_in * start;
567 tx_in * ptr;
568 tx_in * limit;
569 } in;
570 struct {
571 tx_out * start;
572 tx_out * ptr;
573 tx_out * limit;
574 } out;
575 } amb_txq;
577 typedef struct {
578 spinlock_t lock;
579 unsigned int pending;
580 unsigned int low;
581 unsigned int emptied;
582 unsigned int maximum; // size - 1 (q implementation)
583 struct {
584 rx_in * start;
585 rx_in * ptr;
586 rx_in * limit;
587 } in;
588 struct {
589 rx_out * start;
590 rx_out * ptr;
591 rx_out * limit;
592 } out;
593 unsigned int buffers_wanted;
594 unsigned int buffer_size;
595 } amb_rxq;
597 typedef struct {
598 unsigned long tx_ok;
599 struct {
600 unsigned long ok;
601 unsigned long error;
602 unsigned long badcrc;
603 unsigned long toolong;
604 unsigned long aborted;
605 unsigned long unused;
606 } rx;
607 } amb_stats;
609 // a single struct pointed to by atm_vcc->dev_data
611 typedef struct {
612 u8 tx_vc_bits:7;
613 u8 tx_present:1;
614 } amb_tx_info;
616 typedef struct {
617 unsigned char pool;
618 } amb_rx_info;
620 typedef struct {
621 amb_rx_info rx_info;
622 u16 tx_frame_bits;
623 unsigned int tx_rate;
624 unsigned int rx_rate;
625 } amb_vcc;
627 struct amb_dev {
628 u8 irq;
629 unsigned long flags;
630 u32 iobase;
631 u32 * membase;
633 #ifdef FILL_RX_POOLS_IN_BH
634 struct work_struct bh;
635 #endif
637 amb_cq cq;
638 amb_txq txq;
639 amb_rxq rxq[NUM_RX_POOLS];
641 struct mutex vcc_sf;
642 amb_tx_info txer[NUM_VCS];
643 struct atm_vcc * rxer[NUM_VCS];
644 unsigned int tx_avail;
645 unsigned int rx_avail;
647 amb_stats stats;
649 struct atm_dev * atm_dev;
650 struct pci_dev * pci_dev;
651 struct timer_list housekeeping;
654 typedef struct amb_dev amb_dev;
656 #define AMB_DEV(atm_dev) ((amb_dev *) (atm_dev)->dev_data)
657 #define AMB_VCC(atm_vcc) ((amb_vcc *) (atm_vcc)->dev_data)
659 /* rate rounding */
661 typedef enum {
662 round_up,
663 round_down,
664 round_nearest
665 } rounding;
667 #endif