1 /* irq.c: FRV IRQ handling
3 * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/ptrace.h>
13 #include <linux/errno.h>
14 #include <linux/signal.h>
15 #include <linux/sched.h>
16 #include <linux/ioport.h>
17 #include <linux/interrupt.h>
18 #include <linux/timex.h>
19 #include <linux/slab.h>
20 #include <linux/random.h>
21 #include <linux/init.h>
22 #include <linux/kernel_stat.h>
23 #include <linux/irq.h>
24 #include <linux/proc_fs.h>
25 #include <linux/seq_file.h>
26 #include <linux/module.h>
27 #include <linux/bitops.h>
29 #include <asm/atomic.h>
32 #include <asm/system.h>
33 #include <asm/uaccess.h>
34 #include <asm/pgalloc.h>
35 #include <asm/delay.h>
37 #include <asm/irc-regs.h>
38 #include <asm/gdb-stub.h>
40 #define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
42 extern void __init
fpga_init(void);
43 #ifdef CONFIG_FUJITSU_MB93493
44 extern void __init
mb93493_init(void);
47 #define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
49 atomic_t irq_err_count
;
52 * Generic, controller-independent functions:
54 int show_interrupts(struct seq_file
*p
, void *v
)
56 int i
= *(loff_t
*) v
, cpu
;
57 struct irqaction
* action
;
64 for_each_present_cpu(cpu
) {
65 sprintf(cpuname
, "CPU%d", cpu
);
66 seq_printf(p
, " %10s", cpuname
);
72 spin_lock_irqsave(&irq_desc
[i
].lock
, flags
);
73 action
= irq_desc
[i
].action
;
75 seq_printf(p
, "%3d: ", i
);
76 for_each_present_cpu(cpu
)
77 seq_printf(p
, "%10u ", kstat_irqs_cpu(i
, cpu
));
78 seq_printf(p
, " %10s", irq_desc
[i
].chip
->name
? : "-");
79 seq_printf(p
, " %s", action
->name
);
80 for (action
= action
->next
;
82 action
= action
->next
)
83 seq_printf(p
, ", %s", action
->name
);
88 spin_unlock_irqrestore(&irq_desc
[i
].lock
, flags
);
89 } else if (i
== NR_IRQS
) {
90 seq_printf(p
, "Err: %10u\n", atomic_read(&irq_err_count
));
97 * on-CPU PIC operations
99 static void frv_cpupic_ack(unsigned int irqlevel
)
105 static void frv_cpupic_mask(unsigned int irqlevel
)
107 __set_MASK(irqlevel
);
110 static void frv_cpupic_mask_ack(unsigned int irqlevel
)
112 __set_MASK(irqlevel
);
117 static void frv_cpupic_unmask(unsigned int irqlevel
)
119 __clr_MASK(irqlevel
);
122 static void frv_cpupic_end(unsigned int irqlevel
)
124 __clr_MASK(irqlevel
);
127 static struct irq_chip frv_cpu_pic
= {
129 .ack
= frv_cpupic_ack
,
130 .mask
= frv_cpupic_mask
,
131 .mask_ack
= frv_cpupic_mask_ack
,
132 .unmask
= frv_cpupic_unmask
,
133 .end
= frv_cpupic_end
,
137 * handles all normal device IRQs
138 * - registers are referred to by the __frame variable (GR28)
139 * - IRQ distribution is complicated in this arch because of the many PICs, the
140 * way they work and the way they cascade
142 asmlinkage
void do_IRQ(void)
145 generic_handle_irq(__get_IRL());
150 * handles all NMIs when not co-opted by the debugger
151 * - registers are referred to by the __frame variable (GR28)
153 asmlinkage
void do_NMI(void)
158 * initialise the interrupt system
160 void __init
init_IRQ(void)
164 for (level
= 1; level
<= 14; level
++)
165 set_irq_chip_and_handler(level
, &frv_cpu_pic
,
168 set_irq_handler(IRQ_CPU_TIMER0
, handle_edge_irq
);
170 /* set the trigger levels for internal interrupt sources
171 * - timers all falling-edge
172 * - ERR0 is rising-edge
173 * - all others are high-level
175 __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 */
176 __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 */
178 /* route internal interrupts */
179 set_IRR(4, IRQ_DMA3_LEVEL
, IRQ_DMA2_LEVEL
, IRQ_DMA1_LEVEL
,
181 set_IRR(5, 0, IRQ_TIMER2_LEVEL
, IRQ_TIMER1_LEVEL
, IRQ_TIMER0_LEVEL
);
182 set_IRR(6, IRQ_GDBSTUB_LEVEL
, IRQ_GDBSTUB_LEVEL
,
183 IRQ_UART1_LEVEL
, IRQ_UART0_LEVEL
);
184 set_IRR(7, IRQ_DMA7_LEVEL
, IRQ_DMA6_LEVEL
, IRQ_DMA5_LEVEL
,
187 /* route external interrupts */
188 set_IRR(2, IRQ_XIRQ7_LEVEL
, IRQ_XIRQ6_LEVEL
, IRQ_XIRQ5_LEVEL
,
190 set_IRR(3, IRQ_XIRQ3_LEVEL
, IRQ_XIRQ2_LEVEL
, IRQ_XIRQ1_LEVEL
,
193 #if defined(CONFIG_MB93091_VDK)
194 __set_TM1(0x55550000); /* XIRQ7-0 all active low */
195 #elif defined(CONFIG_MB93093_PDK)
196 __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */
198 #error dont know external IRQ trigger levels for this setup
202 #ifdef CONFIG_FUJITSU_MB93493