payloads/external/Makefile.inc

   1 ## SPDX-License-Identifier: GPL-2.0-only
   2
   3 # set up payload config and version files for later inclusion
   4 ifeq ($(CONFIG_PAYLOAD_BUILD_SEABIOS),y)
   5 PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config
   6 PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h
   7 endif
   8 ifeq ($(CONFIG_PAYLOAD_FILO),y)
   9 PAYLOAD_CONFIG=payloads/external/FILO/filo/.config
  10 PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h
  11 endif
  12 ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y)
  13 PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config
  14 $(PAYLOAD_CONFIG): payloads/external/depthcharge/depthcharge/build/depthcharge.elf
  15 ifeq ($(call strip_quotes,$(CONFIG_MAINBOARD_DEPTHCHARGE)),)
  16   BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER))))
  17 else
  18   BOARD=$(CONFIG_MAINBOARD_DEPTHCHARGE)
  19 endif
  20 #TODO: Figure out version
  21 endif
  22
  23 ifeq ($(CONFIG_PAYLOAD_LINUX)$(CONFIG_PAYLOAD_LINUXBOOT),y)
  24 ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
  25       ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
  26 endif
  27 ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),)
  28 ifneq ($(CONFIG_LINUXBOOT_ARM64),y)
  29       ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX)
  30       prebuilt-files += $(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD)))
  31 endif
  32 endif
  33 endif
  34 ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),)
  35       ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS)))
  36 endif
  37
  38 cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload
  39 $(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE)
  40 ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y)
  41 $(CONFIG_CBFS_PREFIX)/payload-type := flat-binary
  42 else
  43 $(CONFIG_CBFS_PREFIX)/payload-type := payload
  44 endif
  45 $(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG)
  46 $(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG)
  47
  48 cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_config
  49 payload_config-file := $(PAYLOAD_CONFIG)
  50 payload_config-type := raw
  51
  52 cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision
  53 payload_revision-file := $(PAYLOAD_VERSION)
  54 payload_revision-type := raw
  55
  56 cbfs-files-$(CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE) += etc/grub.cfg
  57 etc/grub.cfg-file := $(CONFIG_GRUB2_RUNTIME_CONFIG_FILE)
  58 etc/grub.cfg-type := raw
  59 etc/grub.cfg-required := the GRUB runtime configuration file ($(CONFIG_GRUB2_RUNTIME_CONFIG_FILE))
  60
  61 # SeaBIOS
  62
  63 SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1)
  64 SEABIOS_TARGET_PATH=payloads/external/SeaBIOS/seabios/out/bios.bin.elf
  65 $(SEABIOS_TARGET_PATH): $(DOTCONFIG)
  66         $(MAKE) -C payloads/external/SeaBIOS \
  67                         HOSTCC="$(HOSTCC)" \
  68                         CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \
  69                         CFLAGS="$(patsubst $(word $(SEABIOS_CC_OFFSET),$(CC_x86_32))%,,$(wordlist $(SEABIOS_CC_OFFSET),9999,$(CC_x86_32)))" \
  70                         LD=$(word 1,$(LD_x86_32)) LDFLAGS="$(patsubst $(word 1,$(LD_x86_32))%,,$(LD_x86_32))" \
  71                         OBJDUMP="$(OBJDUMP_x86_32)" \
  72                         OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
  73                         AS="$(AS_x86_32)" IASL="$(IASL)" \
  74                         CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \
  75                         CONFIG_SEABIOS_STABLE=$(CONFIG_SEABIOS_STABLE) \
  76                         CONFIG_SEABIOS_REVISION=$(CONFIG_SEABIOS_REVISION) \
  77                         CONFIG_SEABIOS_REVISION_ID=$(CONFIG_SEABIOS_REVISION_ID) \
  78                         CONFIG_PAYLOAD_CONFIGFILE=$(CONFIG_PAYLOAD_CONFIGFILE) \
  79                         CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
  80                         CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
  81                         CONFIG_DRIVERS_UART_8250IO=$(CONFIG_DRIVERS_UART_8250IO) \
  82                         CONFIG_DRIVERS_UART_8250MEM=$(CONFIG_DRIVERS_UART_8250MEM) \
  83                         CONFIG_HUDSON_UART=$(CONFIG_HUDSON_UART) \
  84                         CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
  85                         CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
  86                         CONFIG_SEABIOS_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL) \
  87                         CONFIG_DRIVERS_UART_8250MEM_32=$(CONFIG_DRIVERS_UART_8250MEM_32) \
  88                         CONFIG_ENABLE_HSUART=$(CONFIG_ENABLE_HSUART) \
  89                         CONFIG_CONSOLE_UART_BASE_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS) \
  90                         CONFIG_SEABIOS_HARDWARE_IRQ=$(CONFIG_SEABIOS_HARDWARE_IRQ)
  91
  92 payloads/external/SeaBIOS/seabios/out/vgabios.bin: $(SEABIOS_TARGET_PATH)
  93 payloads/external/SeaBIOS/seabios/.config: $(SEABIOS_TARGET_PATH)
  94 payloads/external/SeaBIOS/seabios/out/autoversion.h: $(SEABIOS_TARGET_PATH)
  95
  96 cbfs-files-$(CONFIG_SEABIOS_SECONDARY_PAYLOAD) += img/seabios
  97 img/seabios-file := $(SEABIOS_TARGET_PATH)
  98 img/seabios-type := payload
  99 img/seabios-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
 100
 101 # add a SeaBIOS bootorder file
 102 ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),)
 103 cbfs-files-y += bootorder
 104 bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE))
 105 bootorder-type := raw
 106 endif
 107
 108 ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
 109 ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
 110 $(call add_intermediate, seabios_ps2_timeout, $(CBFSTOOL))
 111         @printf "    SeaBIOS    Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
 112         $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/ps2-keyboard-spinup 2>/dev/null)
 113         $(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
 114 endif
 115 endif
 116
 117 ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y)
 118 $(call add_intermediate, seabios_sercon, $(CBFSTOOL))
 119         @printf "    SeaBIOS    Add sercon-port file\n"
 120         $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/sercon-port 2>/dev/null)
 121         $(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port
 122 endif
 123
 124 ifeq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
 125 $(call add_intermediate, seabios_thread_optionroms, $(CBFSTOOL))
 126         @printf "    SeaBIOS    Thread optionroms\n"
 127         $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/threads 2>/dev/null)
 128         $(CBFSTOOL) $< add-int -i 2 -n etc/threads
 129 endif
 130
 131 ifeq ($(CONFIG_PAYLOAD_SEAGRUB),y)
 132 ifneq ($(CONFIG_SEAGRUB_ALLOW_SEABIOS_BOOTMENU),y)
 133 $(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
 134         @printf "    SeaBIOS    Disable boot menu\n"
 135         $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
 136         $(CBFSTOOL) $< add-int -i 0 -n etc/show-boot-menu
 137 else
 138 $(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
 139         $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
 140 endif
 141 endif
 142
 143 # Depthcharge
 144
 145 payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL)
 146         $(MAKE) -C payloads/external/depthcharge \
 147                 BOARD=$(BOARD) \
 148                 MFLAGS= MAKEFLAGS= \
 149                 DEPTHCHARGE_MASTER=$(CONFIG_DEPTHCHARGE_MASTER) \
 150                 DEPTHCHARGE_STABLE=$(CONFIG_DEPTHCHARGE_STABLE) \
 151                 DEPTHCHARGE_REVISION=$(CONFIG_DEPTHCHARGE_REVISION) \
 152                 DEPTHCHARGE_REVISION_ID=$(CONFIG_DEPTHCHARGE_REVISION_ID) \
 153                 OVERRIDE_DEFCONFIG=$(CONFIG_LP_DEFCONFIG_OVERRIDE)
 154
 155 # edk2
 156
 157 $(obj)/UEFIPAYLOAD.fd: $(DOTCONFIG)
 158         $(MAKE) -C payloads/external/edk2 UefiPayloadPkg \
 159                 HOSTCC="$(HOSTCC)" \
 160                 CC="$(HOSTCC)" \
 161                 CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \
 162                 CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \
 163                 CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \
 164                 CONFIG_EDK2_REPO_OFFICIAL=$(CONFIG_EDK2_REPO_OFFICIAL) \
 165                 CONFIG_EDK2_REPO_MRCHROMEBOX=$(CONFIG_EDK2_REPO_MRCHROMEBOX) \
 166                 CONFIG_EDK2_REPO_CUSTOM=$(CONFIG_EDK2_REPO_CUSTOM) \
 167                 CONFIG_EDK2_CPU_TIMER_LIB=$(CONFIG_EDK2_CPU_TIMER_LIB) \
 168                 CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \
 169                 CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \
 170                 CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \
 171                 CONFIG_EDK2_VERBOSE_BUILD=$(CONFIG_EDK2_VERBOSE_BUILD) \
 172                 CONFIG_EDK2_ABOVE_4G_MEMORY=$(CONFIG_EDK2_ABOVE_4G_MEMORY) \
 173                 CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \
 174                 CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \
 175                 CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \
 176                 CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \
 177                 CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \
 178                 CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \
 179                 CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \
 180                 CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \
 181                 CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \
 182                 CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \
 183                 CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \
 184                 CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
 185                 CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \
 186                 CONFIG_CPU_XTAL_HZ=$(CONFIG_CPU_XTAL_HZ) \
 187                 CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_v2) \
 188                 GCC_CC_x86_32=$(GCC_CC_x86_32) \
 189                 GCC_CC_x86_64=$(GCC_CC_x86_64) \
 190                 GCC_CC_arm=$(GCC_CC_arm) \
 191                 GCC_CC_arm64=$(GCC_CC_arm64) \
 192                 OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
 193                 OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
 194                 OBJCOPY_arm=$(OBJCOPY_arm) \
 195                 OBJCOPY_arm64=$(OBJCOPY_arm64) \
 196                 MFLAGS= MAKEFLAGS=
 197
 198 $(obj)/ShimmedUniversalPayload.elf: $(DOTCONFIG)
 199         $(MAKE) -C payloads/external/edk2 UniversalPayload \
 200                 HOSTCC="$(HOSTCC)" \
 201                 CC="$(HOSTCC)" \
 202                 CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \
 203                 CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \
 204                 CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \
 205                 CONFIG_EDK2_REPO_OFFICIAL=$(CONFIG_EDK2_REPO_OFFICIAL) \
 206                 CONFIG_EDK2_REPO_MRCHROMEBOX=$(CONFIG_EDK2_REPO_MRCHROMEBOX) \
 207                 CONFIG_EDK2_REPO_CUSTOM=$(CONFIG_EDK2_REPO_CUSTOM) \
 208                 CONFIG_EDK2_CPU_TIMER_LIB=$(CONFIG_EDK2_CPU_TIMER_LIB) \
 209                 CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \
 210                 CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \
 211                 CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \
 212                 CONFIG_EDK2_ABOVE_4G_MEMORY=$(CONFIG_EDK2_ABOVE_4G_MEMORY) \
 213                 CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \
 214                 CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \
 215                 CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \
 216                 CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \
 217                 CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \
 218                 CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \
 219                 CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \
 220                 CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \
 221                 CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \
 222                 CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \
 223                 CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \
 224                 CONFIG_EDK2_UNIVERSAL_PAYLOAD=$(CONFIG_EDK2_UNIVERSAL_PAYLOAD) \
 225                 CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
 226                 CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \
 227                 CONFIG_CPU_XTAL_HZ=$(CONFIG_CPU_XTAL_HZ) \
 228                 CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_v2) \
 229                 GCC_CC_x86_32=$(GCC_CC_x86_32) \
 230                 GCC_CC_x86_64=$(GCC_CC_x86_64) \
 231                 GCC_CC_arm=$(GCC_CC_arm) \
 232                 GCC_CC_arm64=$(GCC_CC_arm64) \
 233                 OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
 234                 OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
 235                 OBJCOPY_arm=$(OBJCOPY_arm) \
 236                 OBJCOPY_arm64=$(OBJCOPY_arm64) \
 237                 MFLAGS= MAKEFLAGS=
 238
 239 # FILO
 240
 241 filo:
 242         $(MAKE) -C payloads/external/FILO \
 243                         HOSTCC="$(HOSTCC)" \
 244                         CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
 245                         OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
 246                         CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \
 247                         CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE) \
 248                         CONFIG_FILO_USE_AUTOBOOT=$(CONFIG_FILO_USE_AUTOBOOT) \
 249                         CONFIG_FILO_AUTOBOOT_FILE=$(CONFIG_FILO_AUTOBOOT_FILE) \
 250                         CONFIG_FILO_AUTOBOOT_DELAY=$(CONFIG_FILO_AUTOBOOT_DELAY)
 251
 252 payloads/external/FILO/filo/build/filo.elf: filo
 253 payloads/external/FILO/filo/.config: filo
 254 payloads/external/FILO/filo/build/version.h: filo
 255
 256 # Grub
 257
 258 GRUB_TARGET_PATH=payloads/external/GRUB2/grub2/build/default_payload.elf
 259
 260 cbfs-files-$(CONFIG_GRUB2_SECONDARY_PAYLOAD) += img/grub2
 261 img/grub2-file := $(GRUB_TARGET_PATH)
 262 img/grub2-type := payload
 263 img/grub2-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
 264
 265 grub2: $(obj)/config.h
 266         $(MAKE) -C payloads/external/GRUB2 \
 267                         HOSTCC="$(HOSTCC)" \
 268                         CC="$(CC_x86_32)" LD="$(LD_x86_32)" \
 269                         OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
 270                         CONFIG_DEP="$(abspath $(obj)/config.h)" \
 271                         CONFIG_GRUB2_STABLE=$(CONFIG_GRUB2_STABLE) \
 272                         CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \
 273                         CONFIG_GRUB2_REVISION=$(CONFIG_GRUB2_REVISION) \
 274                         CONFIG_GRUB2_REVISION_ID=$(CONFIG_GRUB2_REVISION_ID) \
 275                         CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES)
 276
 277 $(GRUB_TARGET_PATH): grub2
 278
 279 # U-Boot
 280
 281 payloads/external/U-Boot/build/u-boot.bin u-boot: $(DOTCONFIG)
 282         $(MAKE) -C payloads/external/U-Boot \
 283                         STABLE_COMMIT_ID=$(CONFIG_UBOOT_STABLE_COMMIT_ID) \
 284                         CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \
 285                         CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE)
 286
 287 # TINT
 288
 289 payloads/external/tint/tint/tint.elf tint:
 290         $(MAKE) -C payloads/external/tint
 291
 292 cbfs-files-$(CONFIG_TINT_SECONDARY_PAYLOAD) += img/tint
 293 img/tint-file := payloads/external/tint/tint/tint.elf
 294 img/tint-type := payload
 295 img/tint-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
 296
 297 # Memtest86+
 298
 299 cbfs-files-$(CONFIG_MEMTEST_SECONDARY_PAYLOAD) += img/memtest
 300 img/memtest-file := payloads/external/Memtest86Plus/memtest86plus/memtest
 301 img/memtest-type := payload
 302 img/memtest-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
 303
 304 ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
 305         MEMTEST_SERIAL_OPTIONS=SERIAL_CONSOLE_DEFAULT=1 \
 306                 SERIAL_TTY=$(CONFIG_UART_FOR_CONSOLE) \
 307                 SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD)
 308 endif
 309
 310 payloads/external/Memtest86Plus/memtest86plus/memtest: $(DOTCONFIG)
 311         $(MAKE) -C payloads/external/Memtest86Plus all \
 312                 CC="$(CC_x86_32)" \
 313                 LD="$(LD_x86_32)" \
 314                 OBJCOPY="$(OBJCOPY_x86_32)" \
 315                 AS="$(AS_x86_32)" \
 316                 CONFIG_MEMTEST_REVISION=$(CONFIG_MEMTEST_REVISION) \
 317                 CONFIG_MEMTEST_REVISION_ID=$(CONFIG_MEMTEST_REVISION_ID) \
 318                 CONFIG_MEMTEST_MASTER=$(CONFIG_MEMTEST_MASTER) \
 319                 CONFIG_MEMTEST_STABLE=$(CONFIG_MEMTEST_STABLE) \
 320                 $(MEMTEST_SERIAL_OPTIONS) \
 321                 MFLAGS= MAKEFLAGS=
 322
 323 # iPXE
 324
 325 PXE_ROM_PCI_ID:=$(subst $(comma),,$(CONFIG_PXE_ROM_ID))
 326
 327 ifeq ($(CONFIG_PXE_ROM),y)
 328 PXE_ROM_FILE:=$(CONFIG_PXE_ROM_FILE)
 329 endif
 330 ifeq ($(CONFIG_BUILD_IPXE),y)
 331 PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom
 332 endif
 333 ifeq ($(CONFIG_PXE_ADD_SCRIPT),y)
 334 PXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_PXE_SCRIPT)))
 335 endif
 336 ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
 337 IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1)
 338 endif
 339
 340 ifeq ($(CONFIG_PXE_SERIAL_CONSOLE),y)
 341 IPXE_SERIAL_CONSOLE = $(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO)
 342 else
 343 IPXE_SERIAL_CONSOLE = n
 344 endif
 345
 346 cbfs-files-$(CONFIG_PXE_ROM)$(CONFIG_BUILD_IPXE) += pci$(CONFIG_PXE_ROM_ID).rom
 347 pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE)
 348 pci$(CONFIG_PXE_ROM_ID).rom-type := raw
 349
 350 payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(PXE_CONFIG_SCRIPT)
 351         $(MAKE) -C payloads/external/iPXE all \
 352         CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \
 353         PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \
 354         CONFIG_IPXE_MASTER=$(CONFIG_IPXE_MASTER) \
 355         CONFIG_IPXE_STABLE=$(CONFIG_IPXE_STABLE) \
 356         CONSOLE_SERIAL=$(IPXE_SERIAL_CONSOLE) \
 357         IPXE_UART=$(IPXE_UART) \
 358         CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \
 359         CONFIG_SCRIPT=$(PXE_CONFIG_SCRIPT) \
 360         CONFIG_HAS_SCRIPT=$(CONFIG_PXE_ADD_SCRIPT) \
 361         CONFIG_PXE_NO_PROMPT=$(CONFIG_PXE_NO_PROMPT) \
 362         CONFIG_PXE_HAS_HTTPS=$(CONFIG_PXE_HAS_HTTPS) \
 363         MFLAGS= MAKEFLAGS=
 364
 365 # LinuxBoot
 366
 367 linuxboot:
 368         $(MAKE) -C payloads/external/LinuxBoot \
 369                 CPUS=$(CPUS) \
 370                 CONFIG_LINUXBOOT_X86_64=$(CONFIG_LINUXBOOT_X86_64) \
 371                 CONFIG_LINUXBOOT_X86=$(CONFIG_LINUXBOOT_X86) \
 372                 CONFIG_LINUXBOOT_ARM64=$(CONFIG_LINUXBOOT_ARM64) \
 373                 CONFIG_LINUXBOOT_KERNEL=$(CONFIG_PAYLOAD_FILE) \
 374                 CONFIG_LINUXBOOT_INITRAMFS=$(CONFIG_LINUX_INITRD) \
 375                 CONFIG_LINUXBOOT_INITRAMFS_SUFFIX=$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) \
 376                 CONFIG_LINUXBOOT_COMPILE_KERNEL=$(CONFIG_LINUXBOOT_COMPILE_KERNEL) \
 377                 CONFIG_LINUXBOOT_BUILD_INITRAMFS=$(CONFIG_LINUXBOOT_BUILD_INITRAMFS) \
 378                 CONFIG_LINUXBOOT_KERNEL_MAINLINE=$(CONFIG_LINUXBOOT_KERNEL_MAINLINE) \
 379                 CONFIG_LINUXBOOT_KERNEL_STABLE=$(CONFIG_LINUXBOOT_KERNEL_STABLE) \
 380                 CONFIG_LINUXBOOT_KERNEL_LONGTERM=$(CONFIG_LINUXBOOT_KERNEL_LONGTERM) \
 381                 CONFIG_LINUXBOOT_KERNEL_CUSTOM=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM) \
 382                 CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION) \
 383                 CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG) \
 384                 CONFIG_LINUXBOOT_KERNEL_BZIMAGE=$(CONFIG_LINUXBOOT_KERNEL_BZIMAGE) \
 385                 CONFIG_LINUXBOOT_KERNEL_UIMAGE=$(CONFIG_LINUXBOOT_KERNEL_UIMAGE) \
 386                 CONFIG_LINUXBOOT_KERNEL_CONFIGFILE=$(CONFIG_LINUXBOOT_KERNEL_CONFIGFILE) \
 387                 CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ=$(CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ) \
 388                 CONFIG_LINUXBOOT_UROOT=$(CONFIG_LINUXBOOT_UROOT) \
 389                 CONFIG_LINUXBOOT_UROOT_VERSION=$(CONFIG_LINUXBOOT_UROOT_VERSION) \
 390                 CONFIG_LINUXBOOT_UROOT_FORMAT=$(CONFIG_LINUXBOOT_UROOT_FORMAT) \
 391                 CONFIG_LINUXBOOT_UROOT_INITCMD=$(CONFIG_LINUXBOOT_UROOT_INITCMD) \
 392                 CONFIG_LINUXBOOT_UROOT_UINITCMD=$(CONFIG_LINUXBOOT_UROOT_UINITCMD)\
 393                 CONFIG_LINUXBOOT_UROOT_SHELL=$(CONFIG_LINUXBOOT_UROOT_SHELL) \
 394                 CONFIG_LINUXBOOT_UROOT_COMMANDS=$(CONFIG_LINUXBOOT_UROOT_COMMANDS) \
 395                 CONFIG_LINUXBOOT_UROOT_FILES=$(CONFIG_LINUXBOOT_UROOT_FILES) \
 396                 CONFIG_LINUXBOOT_DTB_FILE=$(CONFIG_LINUXBOOT_DTB_FILE)
 397
 398 payloads/external/LinuxBoot/linuxboot/bzImage: linuxboot
 399 payloads/external/LinuxBoot/linuxboot/uImage: linuxboot
 400 payloads/external/LinuxBoot/linuxboot/initramfs_u-root.cpio: linuxboot
 401
 402 # Yabits
 403
 404 payloads/external/Yabits/uefi/build/uefi.elf yabits:
 405         $(MAKE) -C payloads/external/Yabits all \
 406                 XGCCPATH="$(XGCCPATH)" \
 407                 CONFIG_YABITS_REVISION=$(CONFIG_YABITS_REVISION) \
 408                 CONFIG_YABITS_REVISION_ID=$(CONFIG_YABITS_REVISION_ID) \
 409                 CONFIG_YABITS_MASTER=$(CONFIG_YABITS_MASTER) \
 410                 CONFIG_YABITS_STABLE=$(CONFIG_YABITS_STABLE) \
 411                 MFLAGS= MAKEFLAGS=
 412
 413 # BOOTBOOT
 414
 415 payloads/external/BOOTBOOT/bootboot/dist/bootbootcb.elf:
 416         $(MAKE) -C payloads/external/BOOTBOOT all
 417
 418 # skiboot
 419
 420 payloads/external/skiboot/build/skiboot.elf:
 421         $(MAKE) -C payloads/external/skiboot all \
 422                 CONFIG_SKIBOOT_GIT_REPO=$(CONFIG_SKIBOOT_GIT_REPO) \
 423                 CONFIG_SKIBOOT_REVISION=$(CONFIG_SKIBOOT_REVISION)
 424 # COREDOOM
 425
 426 payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf coredoom:
 427         $(MAKE) -C payloads/external/coreDOOM
 428
 429 cbfs-files-$(CONFIG_COREDOOM_SECONDARY_PAYLOAD) += img/coreDOOM
 430 img/coreDOOM-file := payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf
 431 img/coreDOOM-type := payload
 432 img/coreDOOM-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
 433 # WAD file
 434 ifneq ($(strip $(CONFIG_COREDOOM_WAD_FILE)),)
 435 cbfs-files-y += doom.wad
 436 doom.wad-file := $(strip $(CONFIG_COREDOOM_WAD_FILE))
 437 doom.wad-type := raw
 438 doom.wad-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
 439 endif