soc/intel/xeon_sp/cpx: Fix PCU device IDs

[coreboot.git] / Documentation / technotes / 2015-11-rebuilding-coreboot-image-generation.md

Rebuilding coreboot image generation
====================================

Current situation
-----------------
ChromeOS (CrOS) probably has the most complex image bundling process in the
coreboot ecosystem. To make CrOS features more accessible to the wider
coreboot community, we want to move these capabilities into upstream
coreboot’s build system.

Right now, the CrOS build system creates coreboot images, and various
instances of the payload (with different configuration options), plus some
more files (eg. EC firmware), then passes them to a CrOS-specific utility
(`bundle_firmware.py`) to build the final image from that.

`bundle_firmware` adds a flashmap (fmap) to the final image and creates
additional CBFS filesystems in fmap regions. It then extracts some files from
the original CBFS region (that was put in place carefully to later match to
the default fmap region) and copies some of them into the others, as well as
putting more data (eg. the bitmap data, keys) as raw data into other fmap
regions.

With the recent addition of more files to CBFS, both on the coreboot side
(dsdt, FSP, and so on) and with ChromeOS specifics (eg. more files describing
boot screens) we either need to expand the scope of bundle\_firmware or move
the capability to build complex images to upstream coreboot’s build system.
This document proposes to do the latter and outlines how this could be
achieved.

Problems with the current build system parts
--------------------------------------------
One common sentiment is that it should be possible to reuse some of the
existing mechanisms that are supposed to be supplanted by this.
The main concern during this design that precluded their use was that none of
them provides a comprehensive solution to building complex coreboot based
images:
* fmap.dts and fmd provide a flash layout, but no assignment of files of regions
* cbfs-files-y ends up as an internal make variable using
  `weird|formatting|to|deal|with|make’s|limitations`
* make isn’t powerful enough to deal with ordering these entries in said
  variable to guarantee success if there’s enough room for the files. While that
  could be added, that becomes more make macro work indistinguishable from magic
  that people fail to understand, break and with good reason complain about
  to work around such issues, ChromeOS firmware uses a custom tool with even
  more special cases to finally build the image it needs. If coreboot upstream
  is to support vboot, it should also be powerful enough not to need magic tools
  that only live within downstream projects.

Requirements
------------
A complete ChromeOS coreboot image consists of (depending on the device)
* platform specific data in raw fmap regions (eg IFD, ME firmware),
* the bootblock (coming from the bootblock),
* three copies of coreboot, consisting of the stages (verstage, romstage,
  ramstage) plus data,
* depthcharge plus data (with each of the coreboot copies),
* EC firmware files (with each of the coreboot copies),
* signatures over several parts of the image and
* some final checksumming over parts of the image to satisfy boot ROM
  tests on ARM

A complete upstream coreboot image (with fallback/normal switch configuration,
using a yet to be implemented switching scheme based on fmaps) consists of
* platform specific data in raw fmap regions (eg IFD, ME firmware),
* two copies of coreboot, consisting of
 * the bootblock and
 * the stages (romstage, ramstage) plus data,
* payload plus data (with each of the coreboot copies),

Since a single platform is potentially built with different payload
configurations (eg. modding a Chromebook to not use the verified ChromeOS
boot scheme), some concerns need to be kept separate:
* Platform requirements that have nothing to do with the payload or boot schemes
 * IFD, ME, … need to copied to the right place
 * boot ROM requirements such as checksums must be honored
* Payload/boot scheme requirements
 * Having one to three regions with certain files copied into them

Proposal
--------
The proposal is based on manifest files that describe certain aspects of the
final image.
The number of manifest files may change over time, but this seems to be a
reasonable approach for now. As long as coreboot uses fmap and cbfs, there
should be few need to change the language, since composition is done through
files.

The final image is generated by a utility that is handed a number of manifests
and the size of the flash (derived from `CONFIG_ROM_SIZE`). These manifest files
deal with different concerns, with the following an example that should match
current use cases:

Chipset manifest
----------------
The chipset details if there are any non-coreboot regions, and assigns them
names, locations, sizes and file contents and prepares a region for what is
“platform visible” (eg. IFD’s BIOS region) that may be of flexible size
(depending on the flash chip’s size). For the purpose of this document, that
region is called “BIOS”.
It can also specify if there’s a post processing requirement on the final
image.

coreboot manifest
-----------------
coreboot provides lists of the files it generates for each category it’s
building (eg. bootblock, verstage, romstage, ramstage). They not only contain
the stages themselves, but also additional files (eg. dsdt belongs to ramstage
since that’s where it is used)

Boot method manifest
--------------------
The boot method manifest can subdivide the BIOS region, eg. using it directly
(for coreboot’s “simple” bootblock), splitting it in two (for coreboot’s
fallback/normal) or in many parts (for ChromeOS, which requires two CBFS
regions, one for GBB, several for VPD, …).
It also specifies which of the file lists specified earlier belong in which
region (eg. with verstage verifying romstage, verstage needs to be only in
ChromeOS’ RO region, while romstage belongs in RO and both RW regions).
It can also specify a post processing step that is executed before the
chipset’s.

Payload and additional manifests
--------------------------------
External components should also provide manifests to add files to categories.
This way the payload and other components (eg. EC firmware) can be developed
without needing to touch the central boot method manifest (that likely resides
in the coreboot tree, given that coreboot needs to deal with choosing fmap
regions already).

coreboot build system
---------------------
The coreboot build system will be split more distinctly in two phases: The
first is about building the files (with results like romstage.elf), while the
second phase covers the assembly of the final image.

By having a global picture of the final image’s requirements, we can also
avoid issues where files added earlier may prevent later additions that have
stricter constraints - without resorting to hacks like
https://chromium-review.googlesource.com/289491 that reorder the file addition
manually.

Example
-------
As an example, we’ll define an Intel-based board with a postprocessing tool
(something that doesn’t exist, but isn’t hard to imagine):

It specifies an IFD region, an ME, and the BIOS region. After the image is
built, the entire image needs to be processed (although the tool likely works
only on a small part of it)

It’s built in a ChromeOS-like configuration (simplified at places to avoid
distracting from the important parts), so it has three CBFS regions, and
several data regions for its own purpose (similar to GBB, FWID, VPD, …). After
the regions are filled, one data region must be post-processed to contain
signatures to enable verifying other regions.

```
Chipset manifest
================
# A region called IFD, starting at 0, ending at 4K
region IFD: 0 4K
# Add the specified file “raw” into the region.
# If the file is smaller than the region, put it at the bottom and fill up
# with 0xff
raw IFD: build/ifd.bin align=bottom empty=0xff
# Call the postprocessor on the data that ends up in IFD (in this example it
# might lock the IFD)
postprocess IFD: util/ifdprocess -l

# a region called ME, starting at 4K, ending at 2M
region ME: 4K 2M
raw ME: 3rdparty/blobs/soc/intel/xanadu/me.bin align=bottom empty=0x00

# a region called BIOS, starting at 2M, filling up the free space
# filling up fails (build error) if two regions are requested to fill up
# against each other
region BIOS: 2M *

# This would define a region that covers the last 4K of flash.
# The BIOS region specified above will end right before it instead of
# expanding to end of flash
# region AUX: -4K -0

# specify the tool that post-processes the entire image.
postprocess image: util/intelchksum/intelchksum.sh

coreboot manifest
=================
# declare that build/verstage.elf belongs into the group ‘verstage’
# these groups are later referred to by the “cbfs” command.
group verstage: build/verstage.elf stage xip name=fallback/verstage
group romstage: build/romstage.elf stage xip name=fallback/romstage
group ramstage: build/ramstage.elf stage name=fallback/ramstage
compression=lzma
group ramstage: build/dsdt.aml compression=lzma

boot method manifest
====================
# Define RO as region inside BIOS, covering the upper half of the image.
# It’s a build error if the result crosses outside BIOS.
# math expressions are wrapped with ( ),
# and mentions of regions therein always refer to their size
subregion BIOS RO: ( image / 2 ) -0

# Define RW to cover the rest of BIOS.
# The order of RW and RO doesn’t matter except to keep comments clearer.
# Dynamic items like RW (“*”) will be sized to fill unused space after
# everything else is placed.
subregion BIOS RW: 0 *

# It may be necessary to separate the RO/RW definition into another manifest
# file
# that defines the RO configuration of the flash

# Some more subregions, with dynamically calculated sizes
subregion RW RW_A: 0 ( RW / 2 )
subregion RW RW_B: * -0
subregion RW_A FW_MAIN_A: RW_A * -0
subregion RW_A VBLOCK_A: 0 64K
# foo +bar specifies start + size, not (start, end)
# also, start is given as “the end of VBLOCK_A”
# (while using a region in the “end” field means “start of region”)
subregion RW_A FWID_A: VBLOCK_A +64

# To make the example not too verbose, RO only has the CBFS region
subregion RO BOOTSTUB: 0 *

# Postprocess the data that ends up in VBLOCK_A,
# passing the listed regions as additional arguments.
# Circular dependencies are build errors.
postprocess VBLOCK_A(FW_MAIN_A): signtool

# binding files to regions indirectly through groups
cbfs BOOTSTUB: verstage, romstage, ramstage, payload
cbfs FW_MAIN_A: romstage, ramstage, payload

# defining defaults: unless overridden, in all regions that use CBFS (“*”),
# we want all files to come with SHA256 hashes.
# Wildcard defaults have lower priority than specific defaults.
# Other conflicts lead to a build error.
cbfsdefaults *: hash=sha3

payload manifest
================
group payload: payload.elf payload
group payload: bootscreen.jpg name=splashscreen.jpg type=splashscreen

EC firmware manifest
====================
# overrides the cbfsdefault above
group payload: ecrw.bin name=ecrw hash=sha256
group payload: pdrw.bin name=pdrw hash=sha256
```

manifest parsing
----------------
The exact BNF is work in progress.

Some parser rules are
* one line per statement
* '#' introduces a command until the end of line

Some processing rules
* When there’s a conflict (eg. two statements on what to do to a region,
  overlap, anything that can’t be determined), that is a build error.
* the order of statements doesn’t matter, enabling simple addition of more
  manifests where the need arises.