payloads/edk2: Disable the CPU Timer Lib unless supported

[coreboot.git] / src / mainboard / gigabyte / ga-g41m-es2l / devicetree.cb

# SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/x4x              # Northbridge
        device cpu_cluster 0 on         # APIC cluster
                chip cpu/intel/socket_LGA775
                        device lapic 0 on end
                end
                chip cpu/intel/model_1067x      # CPU
                        device lapic 0xACAC off end
                end
        end
        device domain 0 on              # PCI domain
                subsystemid 0x1458 0x5000 inherit
                device pci 0.0 on               # Host Bridge
                        subsystemid 0x1458 0x5000
                end
                device pci 1.0 on end           # PEG
                device pci 2.0 on               # Integrated graphics controller
                        subsystemid 0x1458 0xd000
                end
                device pci 2.1 on               # Integrated graphics controller 2
                        subsystemid 0x1458 0xd001
                end
                chip southbridge/intel/i82801gx # Southbridge
                        register "pirqa_routing" = "0x0b"
                        register "pirqb_routing" = "0x0b"
                        register "pirqc_routing" = "0x0b"
                        register "pirqd_routing" = "0x0b"
                        register "pirqe_routing" = "0x0b"
                        register "pirqf_routing" = "0x0b"
                        register "pirqg_routing" = "0x0b"
                        register "pirqh_routing" = "0x0b"
                        register "ide_enable_primary" = "0x1"
                        register "ide_enable_secondary" = "0x0"
                        register "sata_ports_implemented" = "0x3"
                        register "gpe0_en" = "0x40"

                        register "gen2_dec" = "0x007c0291"      # HWM

                        device pci 1b.0 on              # Audio
                                subsystemid 0x1458 0xa002
                        end
                        device pci 1c.0 on end          # PCIe 1
                        device pci 1c.1 on              # PCIe 2 (NIC)
                                device pci 00.0 on      # PCI 10ec:8168
                                        subsystemid 0x1458 0xe000
                                end
                        end
                        device pci 1c.2 off end         # PCIe 3
                        device pci 1c.3 off end         # PCIe 4
                        device pci 1d.0 on              # USB
                                subsystemid 0x1458 0x5004
                        end
                        device pci 1d.1 on              # USB
                                subsystemid 0x1458 0x5004
                        end
                        device pci 1d.2 on              # USB
                                subsystemid 0x1458 0x5004
                        end
                        device pci 1d.3 on              # USB
                                subsystemid 0x1458 0x5004
                        end
                        device pci 1d.7 on              # USB
                                subsystemid 0x1458 0x5006
                        end
                        device pci 1e.0 on end          # PCI bridge
                        device pci 1e.2 off end         # AC'97 Audio
                        device pci 1e.3 off end         # AC'97 Modem
                        device pci 1f.0 on              # ISA bridge
                                subsystemid 0x1458 0x5001
                                chip superio/ite/it8718f        # Super I/O
                                        register "TMPIN1.mode" = "THERMAL_RESISTOR"
                                        register "TMPIN2.mode" = "THERMAL_RESISTOR"
                                        register "TMPIN3.mode" = "THERMAL_DIODE"
                                        register "TMPIN3.offset" = "0"
                                        register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0"

                                        register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
                                        register "FAN1.smart.tmpin" = "3"
                                        register "FAN1.smart.tmp_off" = "25"
                                        register "FAN1.smart.tmp_start" = "30"
                                        register "FAN1.smart.tmp_full" = "65"
                                        register "FAN1.smart.tmp_delta" = "3"
                                        register "FAN1.smart.smoothing" = "1"
                                        register "FAN1.smart.pwm_start" = "0"
                                        register "FAN1.smart.slope" = "10"

                                        register "FAN2.mode" = "FAN_SMART_AUTOMATIC"
                                        register "FAN2.smart.tmpin" = "3"
                                        register "FAN2.smart.tmp_off" = "25"
                                        register "FAN2.smart.tmp_start" = "30"
                                        register "FAN2.smart.tmp_full" = "65"
                                        register "FAN2.smart.tmp_delta" = "3"
                                        register "FAN2.smart.smoothing" = "1"
                                        register "FAN2.smart.pwm_start" = "0"
                                        register "FAN2.smart.slope" = "10"

                                        device pnp 2e.0 on      # Floppy
                                                io 0x60 = 0x3f0
                                                irq 0x70 = 6
                                                drq 0x74 = 2
                                                irq 0xf0 = 0x00
                                                irq 0xf1 = 0x80
                                        end
                                        device pnp 2e.1 on      # COM1
                                                io 0x60 = 0x3f8
                                                irq 0x70 = 4
                                        end
                                        device pnp 2e.2 on      # COM2
                                                io 0x60 = 0x2f8
                                                irq 0x70 = 3
                                        end
                                        device pnp 2e.3 on      # Parallel port
                                                io 0x60 = 0x378
                                                irq 0x70 = 7
                                                io 0x62 = 0x000
                                                drq 0x74 = 4
                                                irq 0xf0 = 0x08
                                        end
                                        device pnp 2e.4 on      # Environment controller
                                                io 0x60 = 0x290
                                                irq 0x70 = 0x00
                                                io 0x62 = 0x000
                                                irq 0xf0 = 0x80
                                                irq 0xf1 = 0x00
                                                irq 0xf2 = 0x0a
                                                irq 0xf3 = 0x80
                                                irq 0xf4 = 0x00
                                                irq 0xf5 = 0x00
                                                irq 0xf6 = 0xff
                                        end
                                        device pnp 2e.5 on      # Keyboard
                                                io 0x60 = 0x60
                                                irq 0x70 = 1
                                                io 0x62 = 0x64
                                                irq 0xf0 = 0x48
                                        end
                                        device pnp 2e.6 on      # Mouse
                                                irq 0x70 = 12
                                                irq 0x71 = 2
                                                irq 0xf0 = 0
                                        end
                                end
                        end
                        device pci 1f.1 on              # PATA/IDE
                                subsystemid 0x1458 0xb004
                        end
                        device pci 1f.2 on              # SATA
                                subsystemid 0x1458 0xb005
                        end
                        device pci 1f.3 on              # SMbus
                                subsystemid 0x1458 0x5001
                        end
                end
        end
end