?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
soc/intel/ptl: Update ME specification version to 21
[coreboot.git] / src / mainboard / google / brya / variants / kano / overridetree.cb
blob73f9847611fc7b048e52887e96d0119473a5560c
1 fw_config
2 field KB_BL 0 0
3 option KB_BL_ABSENT 0
4 option KB_BL_PRESENT 1
5 end
6 field AUDIO 1 3
7 option AUDIO_UNKNOWN 0
8 option MAX98373_NAU88L25B_I2S 1
9 end
10 field UFC 4 5
11 option UFC_USB 0
12 option UFC_MIPI_OVTI2740 1
13 option UFC_MIPI_ZYDRON 2
14 end
15 field STYLUS 6
16 option STYLUS_ABSENT 0
17 option STYLUS_PRESENT 1
18 end
19 field ZYDRON_UFC 36 37
20 option UFC_MIPI_OVTI2740 0
21 option UFC_MIPI_HI556 1
22 end
23 end
24 chip soc/intel/alderlake
25 register "domain_vr_config[VR_DOMAIN_IA]" = "{
26 .enable_fast_vmode = 1,
27 }"
28
29 register "sagv" = "SaGv_Enabled"
30
31 # As per Intel Advisory doc#723158, the change is required to prevent possible
32 # display flickering issue.
33 register "usb2_phy_sus_pg_disable" = "1"
34
35 # GPE configuration
36 register "pmc_gpe0_dw1" = "GPP_D"
37
38 # Acoustic settings
39 register "acoustic_noise_mitigation" = "1"
40 register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_8"
41 register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_8"
42 register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "1"
43 register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "1"
44
45 register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2_C1
46 register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Disable M.2 WWAN
47
48 register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Disable M.2 WWAN
49
50 # FIVR configurations for kano are disabled since the board doesn't have V1p05 and Vnn
51 # bypass rails implemented.
52 register "ext_fivr_settings" = "{
53 .configure_ext_fivr = 1,
54 }"
55
56 # Intel Common SoC Config
57 #+-------------------+---------------------------+
58 #| Field | Value |
59 #+-------------------+---------------------------+
60 #| GSPI1 | Fingerprint MCU |
61 #| I2C0 | Audio |
62 #| I2C1 | cr50 TPM. Early init is |
63 #| | required to set up a BAR |
64 #| | for TPM communication |
65 #| I2C2 | SAR0 |
66 #| I2C3 | Touchscreen |
67 #| I2C5 | Trackpad |
68 #+-------------------+---------------------------+
69
70 register "common_soc_config" = "{
71 .i2c[1] = {
72 .early_init = 1,
73 .speed = I2C_SPEED_FAST,
74 .rise_time_ns = 600,
75 .fall_time_ns = 400,
76 .data_hold_time_ns = 50,
77 },
78 .i2c[3] = {
79 .speed = I2C_SPEED_FAST,
80 .rise_time_ns = 650,
81 .fall_time_ns = 400,
82 .data_hold_time_ns = 50,
83 },
84 }"
85
86 register "power_limits_config[ADL_P_282_442_482_28W_CORE]" = "{
87 .tdp_pl1_override = 20,
88 .tdp_pl2_override = 43,
89 .tdp_pl4 = 105,
90 }"
91
92 register "power_limits_config[ADL_P_682_28W_CORE]" = "{
93 .tdp_pl1_override = 20,
94 .tdp_pl2_override = 43,
95 .tdp_pl4 = 105,
96 }"
97
98 device domain 0 on
99 device ref igpu on
100 chip drivers/gfx/generic
101 register "device_count" = "6"
102 # DDIA for eDP
103 register "device[0].name" = ""LCD0""
104 # Internal panel on the first port of the graphics chip
105 register "device[0].type" = "panel"
106 # DDIB for HDMI
107 register "device[1].name" = ""DD01""
108 # TCP0 (DP-1) for port C0
109 register "device[2].name" = ""DD02""
110 register "device[2].use_pld" = "true"
111 register "device[2].pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
112 # TCP1 (DP-2) is unused for any ports but still enumerated in the kernel, so GFX device is added for TCP1
113 register "device[3].name" = ""DD03""
114 # TCP2 (DP-3) for port C1
115 register "device[4].name" = ""DD04""
116 register "device[4].use_pld" = "true"
117 register "device[4].pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
118 # TCP3 (DP-4) is unused for any ports but still enumerated in the kernel, so GFX device is added for TCP3
119 register "device[5].name" = ""DD05""
120 device generic 0 on end
121 end
122 end # Integrated Graphics Device
123 device ref dtt on
124 chip drivers/intel/dptf
125 ## sensor information
126 register "options.tsr[0].desc" = ""DRAM""
127 register "options.tsr[1].desc" = ""Soc""
128 register "options.tsr[2].desc" = ""Charger""
129
130 # TODO: below values are initial reference values only
131 ## Active Policy
132 register "policies.active" = "{
133 [0] = {
134 .target = DPTF_CPU,
135 .thresholds = {
136 TEMP_PCT(85, 90),
137 TEMP_PCT(75, 80),
138 TEMP_PCT(68, 70),
139 TEMP_PCT(62, 60),
140 TEMP_PCT(55, 50),
141 TEMP_PCT(50, 40),
142 TEMP_PCT(40, 30),
143 }
144 },
145 [1] = {
146 .target = DPTF_TEMP_SENSOR_1,
147 .thresholds = {
148 TEMP_PCT(60, 90),
149 TEMP_PCT(55, 80),
150 TEMP_PCT(52, 70),
151 TEMP_PCT(48, 60),
152 TEMP_PCT(44, 50),
153 TEMP_PCT(40, 40),
154 TEMP_PCT(36, 30),
155 }
156 }
157 }"
158
159 ## Passive Policy
160 register "policies.passive" = "{
161 [0] = DPTF_PASSIVE(CPU, CPU, 90, 5000),
162 [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 55, 5000),
163 [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 55, 5000),
164 [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 55, 5000),
165 }"
166
167 ## Critical Policy
168 register "policies.critical" = "{
169 [0] = DPTF_CRITICAL(CPU, 100, SHUTDOWN),
170 [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
171 [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
172 [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
173 }"
174
175 register "controls.power_limits" = "{
176 .pl1 = {
177 .min_power = 18000,
178 .max_power = 20000,
179 .time_window_min = 28 * MSECS_PER_SEC,
180 .time_window_max = 32 * MSECS_PER_SEC,
181 .granularity = 200,
182 },
183 .pl2 = {
184 .min_power = 43000,
185 .max_power = 43000,
186 .time_window_min = 28 * MSECS_PER_SEC,
187 .time_window_max = 32 * MSECS_PER_SEC,
188 .granularity = 1000,
189 }
190 }"
191
192 ## Charger Performance Control (Control, mA)
193 register "controls.charger_perf" = "{
194 [0] = { 255, 1700 },
195 [1] = { 24, 1500 },
196 [2] = { 16, 1000 },
197 [3] = { 8, 500 }
198 }"
199
200 ## Fan Performance Control (Percent, Speed, Noise, Power)
201 register "controls.fan_perf" = "{
202 [0] = { 90, 6700, 220, 2200, },
203 [1] = { 80, 5800, 180, 1800, },
204 [2] = { 70, 5000, 145, 1450, },
205 [3] = { 60, 4900, 115, 1150, },
206 [4] = { 50, 3838, 90, 900, },
207 [5] = { 40, 2904, 55, 550, },
208 [6] = { 30, 2337, 30, 300, },
209 [7] = { 20, 1608, 15, 150, },
210 [8] = { 10, 800, 10, 100, },
211 [9] = { 0, 0, 0, 50, }
212 }"
213
214 ## Fan options
215 register "options.fan.fine_grained_control" = "1"
216 register "options.fan.step_size" = "2"
217
218 device generic 0 alias dptf_policy on end
219 end
220 end
221 device ref ipu on
222 chip drivers/intel/mipi_camera
223 register "acpi_uid" = "0x50000"
224 register "acpi_name" = ""IPU0""
225 register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
226
227 register "cio2_num_ports" = "1"
228 register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
229 register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
230 register "cio2_prt[0]" = "1"
231 device generic 0 on
232 probe UFC UFC_MIPI_OVTI2740
233 probe ZYDRON_UFC UFC_MIPI_HI556
234 probe ZYDRON_UFC UFC_MIPI_OVTI2740
235 end
236 end
237 end
238 device ref pcie4_0 on
239 # Enable CPU PCIE RP 1 using CLK 0
240 register "cpu_pcie_rp[CPU_RP(1)]" = "{
241 .clk_req = 0,
242 .clk_src = 0,
243 .flags = PCIE_RP_LTR | PCIE_RP_AER,
244 }"
245 end
246 device ref tcss_dma0 on
247 chip drivers/intel/usb4/retimer
248 register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
249 use tcss_usb3_port1 as dfp[0].typec_port
250 device generic 0 on end
251 end
252 end
253 device ref tcss_dma1 on
254 chip drivers/intel/usb4/retimer
255 register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
256 use tcss_usb3_port3 as dfp[0].typec_port
257 device generic 0 on end
258 end
259 end
260 device ref cnvi_wifi on
261 chip drivers/wifi/generic
262 register "wake" = "GPE0_PME_B0"
263 device generic 0 on end
264 end
265 end
266 device ref i2c0 on
267 chip drivers/i2c/nau8825
268 register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)"
269 register "jkdet_enable" = "1"
270 register "jkdet_pull_enable" = "0"
271 register "jkdet_pull_up" = "0"
272 register "jkdet_polarity" = "1" # ActiveLow
273 register "vref_impedance" = "2" # 125kOhm
274 register "micbias_voltage" = "6" # 2.754
275 register "sar_threshold_num" = "4"
276 register "sar_threshold[0]" = "0x0C"
277 register "sar_threshold[1]" = "0x1C"
278 register "sar_threshold[2]" = "0x38"
279 register "sar_threshold[3]" = "0x60"
280 register "sar_hysteresis" = "1"
281 register "sar_voltage" = "0" # VDDA
282 register "sar_compare_time" = "0" # 500ns
283 register "sar_sampling_time" = "0" # 2us
284 register "short_key_debounce" = "2" # 100ms
285 register "jack_insert_debounce" = "7" # 512ms
286 register "jack_eject_debounce" = "7" # 512ms
287 device i2c 1a on
288 probe AUDIO MAX98373_NAU88L25B_I2S
289 end
290 end
291 chip drivers/i2c/max98373
292 register "vmon_slot_no" = "0"
293 register "imon_slot_no" = "1"
294 register "uid" = "0"
295 register "desc" = ""Right Speaker Amp""
296 register "name" = ""MAXR""
297 device i2c 31 on
298 probe AUDIO MAX98373_NAU88L25B_I2S
299 end
300 end
301 chip drivers/i2c/max98373
302 register "vmon_slot_no" = "2"
303 register "imon_slot_no" = "3"
304 register "uid" = "1"
305 register "desc" = ""Left Speaker Amp""
306 register "name" = ""MAXL""
307 device i2c 32 on
308 probe AUDIO MAX98373_NAU88L25B_I2S
309 end
310 end
311 end #I2C0
312 device ref i2c1 on
313 chip drivers/i2c/tpm
314 register "hid" = ""GOOG0005""
315 register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
316 device i2c 50 on end
317 end
318 end
319 device ref i2c2 on
320 chip drivers/intel/mipi_camera
321 register "acpi_hid" = ""INT3474""
322 register "acpi_uid" = "0"
323 register "acpi_name" = ""CAM0""
324 register "chip_name" = ""Ov 2740 Camera""
325 register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
326 register "has_power_resource" = "1"
327
328 register "ssdb.lanes_used" = "2"
329 register "ssdb.link_used" = "1"
330 register "num_freq_entries" = "1"
331 register "link_freq[0]" = "360 * MHz"
332 register "remote_name" = ""IPU0""
333 register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
334
335 #Controls
336 register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
337 register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
338
339 register "gpio_panel.gpio[0].gpio_num" = "GPP_F20" #reset
340 register "gpio_panel.gpio[1].gpio_num" = "GPP_C4" #power
341
342 #_ON
343 register "on_seq.ops_cnt" = "4"
344 register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
345 register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
346 register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)"
347 register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
348
349 #_OFF
350 register "off_seq.ops_cnt" = "3"
351 register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
352 register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
353 register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
354
355 device i2c 36 on
356 probe UFC UFC_MIPI_OVTI2740
357 probe ZYDRON_UFC UFC_MIPI_OVTI2740
358 end
359 end
360 chip drivers/intel/mipi_camera
361 register "acpi_hid" = ""INT3537""
362 register "acpi_uid" = "0"
363 register "acpi_name" = ""CAM0""
364 register "chip_name" = ""Hi-556 Camera""
365 register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
366 register "has_power_resource" = "1"
367
368 register "ssdb.lanes_used" = "2"
369 register "ssdb.link_used" = "1"
370 register "num_freq_entries" = "1"
371 register "link_freq[0]" = "437 * MHz" # 437 MHz
372 register "remote_name" = ""IPU0""
373 register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
374
375 #Controls
376 register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
377 register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
378
379 register "gpio_panel.gpio[0].gpio_num" = "GPP_C4" #power
380 register "gpio_panel.gpio[1].gpio_num" = "GPP_F20" #reset
381
382 #_ON
383 register "on_seq.ops_cnt" = "4"
384 register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
385 register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
386 register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)"
387 register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
388
389 #_OFF
390 register "off_seq.ops_cnt" = "3"
391 register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
392 register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
393 register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
394
395 device i2c 20 on
396 probe ZYDRON_UFC UFC_MIPI_HI556
397 end
398 end
399 chip drivers/intel/mipi_camera
400 register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
401 register "acpi_uid" = "1"
402 register "acpi_name" = ""NVM0""
403 register "chip_name" = ""AT24 EEPROM""
404 register "device_type" = "INTEL_ACPI_CAMERA_NVM"
405
406 register "nvm_size" = "0x2000"
407 register "nvm_pagesize" = "1"
408 register "nvm_readonly" = "1"
409 register "nvm_width" = "0x10"
410 register "nvm_compat" = ""atmel,24c64""
411
412 device i2c 50 on
413 probe UFC UFC_MIPI_OVTI2740
414 probe ZYDRON_UFC UFC_MIPI_HI556
415 probe ZYDRON_UFC UFC_MIPI_OVTI2740
416 end
417 end
418 end
419 device ref i2c3 on
420 chip drivers/i2c/hid
421 register "generic.hid" = ""ELAN90FC""
422 register "generic.desc" = ""ELAN Touchscreen""
423 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
424 register "generic.detect" = "1"
425 register "generic.reset_gpio" =
426 "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
427 register "generic.reset_delay_ms" = "150"
428 register "generic.reset_off_delay_ms" = "1"
429 register "generic.enable_gpio" =
430 "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
431 register "generic.enable_delay_ms" = "6"
432 register "generic.enable_off_delay_ms" = "30"
433 register "generic.stop_gpio" =
434 "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
435 register "generic.stop_off_delay_ms" = "1"
436 register "generic.has_power_resource" = "1"
437 register "hid_desc_reg_offset" = "0x01"
438 device i2c 0x10 on end
439 end
440 chip drivers/generic/gpio_keys
441 register "name" = ""PENH""
442 # GPP_D6 is the IRQ source, and GPP_D17 is the wake source
443 register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_D6)"
444 register "key.wake_gpe" = "GPE0_DW1_17"
445 register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
446 register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
447 register "key.dev_name" = ""EJCT""
448 register "key.linux_code" = "SW_PEN_INSERTED"
449 register "key.linux_input_type" = "EV_SW"
450 register "key.label" = ""pen_eject""
451 device generic 0 on
452 probe STYLUS STYLUS_PRESENT
453 end
454 end
455 end
456 device ref i2c5 on
457 chip drivers/i2c/generic
458 register "hid" = ""ELAN0000""
459 register "desc" = ""ELAN Touchpad""
460 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
461 register "wake" = "GPE0_DW2_14"
462 register "detect" = "1"
463 device i2c 15 on end
464 end
465 chip drivers/i2c/hid
466 register "generic.hid" = ""SYNA0000""
467 register "generic.cid" = ""ACPI0C50""
468 register "generic.desc" = ""Synaptics Touchpad""
469 register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
470 register "generic.wake" = "GPE0_DW2_14"
471 register "generic.detect" = "1"
472 register "hid_desc_reg_offset" = "0x20"
473 device i2c 0x2c on end
474 end
475 end
476 device ref pcie_rp6 off end # PCIE6 WWAN
477 device ref pcie_rp8 off end # PCIE8 SD card
478 device ref pcie_rp9 off end # PCIE9-12 SSD
479 device ref gspi1 on
480 chip drivers/spi/acpi
481 register "name" = ""CRFP""
482 register "hid" = "ACPI_DT_NAMESPACE_HID"
483 register "uid" = "1"
484 register "compat_string" = ""google,cros-ec-spi""
485 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
486 register "wake" = "GPE0_DW2_15"
487 register "has_power_resource" = "1"
488 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)"
489 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)"
490 register "enable_delay_ms" = "3"
491 device spi 0 hidden end
492 end # FPMCU
493 end
494 device ref pch_espi on
495 chip ec/google/chromeec
496 use conn0 as mux_conn[0]
497 use conn1 as mux_conn[1]
498 device pnp 0c09.0 on end
499 end
500 end
501 device ref pmc hidden
502 chip drivers/intel/pmc_mux
503 device generic 0 on
504 chip drivers/intel/pmc_mux/conn
505 use usb2_port1 as usb2_port
506 use tcss_usb3_port1 as usb3_port
507 device generic 0 alias conn0 on end
508 end
509 chip drivers/intel/pmc_mux/conn
510 use usb2_port3 as usb2_port
511 use tcss_usb3_port3 as usb3_port
512 device generic 1 alias conn1 on end
513 end
514 end
515 end
516 end
517 device ref tcss_xhci on
518 chip drivers/usb/acpi
519 device ref tcss_root_hub on
520 chip drivers/usb/acpi
521 register "desc" = ""USB3 Type-C Port C0 (MLB)""
522 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
523 register "use_custom_pld" = "true"
524 register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
525 device ref tcss_usb3_port1 on end
526 end
527 chip drivers/usb/acpi
528 register "desc" = ""USB3 Type-C Port C1 (MLB)""
529 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
530 register "use_custom_pld" = "true"
531 register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
532 device ref tcss_usb3_port3 on end
533 end
534 end
535 end
536 end
537 device ref xhci on
538 chip drivers/usb/acpi
539 device ref xhci_root_hub on
540 chip drivers/usb/acpi
541 register "desc" = ""USB2 Type-C Port C0 (MLB)""
542 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
543 register "use_custom_pld" = "true"
544 register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
545 device ref usb2_port1 on end
546 end
547 chip drivers/usb/acpi
548 register "desc" = ""USB2 Type-C Port C1 (MLB)""
549 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
550 register "use_custom_pld" = "true"
551 register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
552 device ref usb2_port3 on end
553 end
554 chip drivers/usb/acpi
555 register "desc" = ""USB2 Camera""
556 register "type" = "UPC_TYPE_INTERNAL"
557 device ref usb2_port6 on
558 probe UFC UFC_USB
559 end
560 end
561 chip drivers/usb/acpi
562 register "desc" = ""USB2 Type-A Port A0 (MLB)""
563 register "type" = "UPC_TYPE_A"
564 register "use_custom_pld" = "true"
565 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))"
566 device ref usb2_port9 on end
567 end
568 chip drivers/usb/acpi
569 register "desc" = ""USB2 Bluetooth""
570 register "type" = "UPC_TYPE_INTERNAL"
571 register "reset_gpio" =
572 "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
573 device ref usb2_port10 on end
574 end
575 chip drivers/usb/acpi
576 register "desc" = ""USB3 Type-A Port A0 (MLB)""
577 register "type" = "UPC_TYPE_USB3_A"
578 register "use_custom_pld" = "true"
579 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))"
580 device ref usb3_port1 on end
581 end
582 end
583 end
584 end
585 device ref hda on
586 chip drivers/sof
587 register "spkr_tplg" = "max98373"
588 register "jack_tplg" = "nau8825"
589 register "mic_tplg" = "_2ch_pdm0"
590 device generic 0 on end
591 end
592 end
593 end
594 end
ast, secure and flexible OpenSource firmware