soc/intel/ptl: Update ME specification version to 21

[coreboot.git] / src / mainboard / google / dedede / variants / awasuki / overridetree.cb

chip soc/intel/jasperlake
        # PCIe RP LTR configuration
        register "PcieRpLtrEnable[7]" = "1"

        # USB Port Configuration
        register "usb2_ports[1]" = "USB2_PORT_EMPTY"
        register "usb2_ports[3]" = "USB2_PORT_EMPTY"
        register "usb2_ports[4]" = "USB2_PORT_EMPTY"
        register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # User Facing Camera

        register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type-C Port C0
        register "usb3_ports[1]" = "USB3_PORT_EMPTY"
        register "usb3_ports[3]" = "USB3_PORT_EMPTY"

        # Intel Common SoC Config
        #+-------------------+---------------------------+
        #| Field             |  Value                    |
        #+-------------------+---------------------------+
        #| GSPI0             | cr50 TPM. Early init is   |
        #|                   | required to set up a BAR  |
        #|                   | for TPM communication     |
        #|                   | before memory is up       |
        #| I2C0              | Trackpad                  |
        #| I2C1              | Disable                   |
        #| I2C2              | Touchscreen               |
        #| I2C3              | Disable                   |
        #| I2C4              | Audio                     |
        #+-------------------+---------------------------+
        register "common_soc_config" = "{
                .gspi[0] = {
                        .speed_mhz = 1,
                        .early_init = 1,
                },
                .i2c[0] = {
                        .speed = I2C_SPEED_FAST,
                        .speed_config[0] = {
                                .speed = I2C_SPEED_FAST,
                                .scl_lcnt = 178,
                                .scl_hcnt = 92,
                                .sda_hold = 40,
                        }
                },
                .i2c[2] = {
                        .speed = I2C_SPEED_FAST,
                        .rise_time_ns = 86,
                        .fall_time_ns = 5,
                },
                .i2c[4] = {
                        .speed = I2C_SPEED_FAST,
                        .rise_time_ns = 69,
                        .fall_time_ns = 3,
                },
        }"

        # SerialIO device mode selection
        register "SerialIoI2cMode" = "{
                [PchSerialIoIndexI2C0]  = PchSerialIoPci,
                [PchSerialIoIndexI2C1]  = PchSerialIoDisabled,
                [PchSerialIoIndexI2C2]  = PchSerialIoPci,
                [PchSerialIoIndexI2C3]  = PchSerialIoDisabled,
                [PchSerialIoIndexI2C4]  = PchSerialIoPci,
                [PchSerialIoIndexI2C5]  = PchSerialIoDisabled,
        }"

        # Power limit config
        register "power_limits_config[JSL_N4500_6W_CORE]" = "{
                .tdp_pl1_override = 5,
                .tdp_pl2_override = 15,
        }"

        register "power_limits_config[JSL_N6000_6W_CORE]" = "{
                .tdp_pl1_override = 5,
                .tdp_pl2_override = 15,
        }"

        register "power_limits_config[JSL_N5100_6W_CORE]" = "{
                .tdp_pl1_override = 5,
                .tdp_pl2_override = 15,
        }"

        # TCC activation offset
        register "tcc_offset" = "10"    # TCC of 95C

        # Set xHCI LFPS period sampling off time
        register "xhci_lfps_sampling_offtime_ms" = "0"

        # Disable SD card
        register "sdcard_cd_gpio" = "0"
        register "SdCardPowerEnableActiveHigh" = "0"

        device domain 0 on
                device pci 04.0 on
                        chip drivers/intel/dptf
                                ## sensor information
                                register "options.tsr[0].desc" = ""Ambient""
                                register "options.tsr[1].desc" = ""Charger""
                                register "options.tsr[2].desc" = ""AUX""
                                register "options.tsr[3].desc" = ""USB""

                                ## Passive Policy
                                register "policies.passive" = "{
                                        [0] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 50,  5000),
                                        [1] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 68,  5000),
                                        [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 68,  5000),
                                        [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 68,  5000),
                                }"

                                ## Critical Policy
                                register "policies.critical" = "{
                                        [0] = DPTF_CRITICAL(CPU,          105, SHUTDOWN),
                                        [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 80, SHUTDOWN),
                                        [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 90, SHUTDOWN),
                                        [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 90, SHUTDOWN),
                                        [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 90, SHUTDOWN),
                                }"

                                register "controls.power_limits.pl1" = "{
                                        .min_power = 5000,
                                        .max_power = 9000,
                                        .time_window_min = 28 * MSECS_PER_SEC,
                                        .time_window_max = 28 * MSECS_PER_SEC,
                                        .granularity = 125,
                                }"

                                register "controls.power_limits.pl2" = "{
                                        .min_power = 15000,
                                        .max_power = 15000,
                                        .time_window_min = 28 * MSECS_PER_SEC,
                                        .time_window_max = 32 * MSECS_PER_SEC,
                                        .granularity = 1000,
                                }"

                                ## Charger Performance Control (Control, mA)
                                register "controls.charger_perf" = "{
                                        [0] = { 255, 3000 },
                                        [1] = {  32, 2000 },
                                        [2] = {  16, 1000 },
                                        [3] = {   8,  500 }
                                }"
                                device generic 0 on end
                        end
                end # SA Thermal device
                device pci 14.0 on
                        chip drivers/usb/acpi
                                device usb 0.0 on
                                        chip drivers/usb/acpi
                                                device usb 2.1 off end
                                        end
                                        chip drivers/usb/acpi
                                                device usb 2.3 off end
                                        end
                                        chip drivers/usb/acpi
                                                device usb 2.4 off end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc" = ""User Facing Camera""
                                                register "type" = "UPC_TYPE_INTERNAL"
                                                register "has_power_resource" = "1"
                                                register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)"
                                                register "enable_delay_ms" = "20"
                                                device usb 2.5 on end
                                        end
                                        chip drivers/usb/acpi
                                                device usb 2.6 off end
                                        end
                                        chip drivers/usb/acpi
                                                device usb 3.1 off end
                                        end
                                        chip drivers/usb/acpi
                                                device usb 3.3 off end
                                        end
                                end
                        end
                end # USB xHCI
                device pci 14.3 on
                        chip drivers/wifi/generic
                                register "wake" = "GPE0_PME_B0"
                                register "enable_cnvi_ddr_rfim" = "true"
                                register "add_acpi_dma_property" = "true"
                                device generic 0 on end
                        end
                end # CNVi wifi
                device pci 15.0 on
                        chip drivers/i2c/hid
                                register "generic.hid" = ""PNP0C50""
                                register "generic.desc" = ""PIXART Touchpad""
                                register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
                                register "generic.wake" = "GPE0_DW0_03"
                                register "generic.detect" = "1"
                                register "hid_desc_reg_offset" = "0x01"
                                device i2c 15 on end
                        end
                end # I2C 0
                device pci 15.1 off end # I2C 1
                device pci 15.2 on
                        probe TOUCHSCREEN TOUCHSCREEN_PRESENT
                        chip drivers/i2c/generic
                                register "hid" = ""ELAN0001""
                                register "desc" = ""ELAN Touchscreen""
                                register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
                                register "detect" = "1"
                                register "reset_gpio" =
                                                        "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
                                register "reset_delay_ms" = "25"
                                register "reset_off_delay_ms" = "8"
                                register "stop_gpio" =
                                                        "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
                                register "stop_off_delay_ms" = "2"
                                register "enable_gpio" =
                                                        "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
                                register "enable_delay_ms" = "7"
                                register "has_power_resource" = "1"
                                device i2c 10 on end
                        end
                end # I2C 2
                device pci 15.3 off end # I2C 3
                device pci 19.0 on
                        chip drivers/i2c/rt5645
                                register "hid" = ""10EC5650""
                                register "name" = ""RT58""
                                register "desc" = ""Realtek RT5650""
                                register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
                                register "cbj_sleeve" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
                                register "jd_mode" = "2"
                                device i2c 1a on end
                        end
                end # I2C 4
                device pci 1c.7 on
                        chip drivers/wifi/generic
                                register "wake" = "GPE0_DW2_03"
                                device pci 00.0 on end
                        end
                end # PCI Express Root Port 8 - WLAN
                device pci 1f.3 on
                        chip drivers/sof
                                register "spkr_tplg" = "rt5650_sp"
                                register "jack_tplg" = "rt5650_hp"
                                register "mic_tplg" = "_2ch_pdm0"
                                device generic 0 on end
                        end
                end # Intel HDA/cAVS
        end
end