src/mainboard/google/hatch/variants/helios/overridetree.cb

   1 chip soc/intel/cannonlake
   2         register "power_limits_config" = "{
   3                 .tdp_pl1_override = 15,
   4                 .tdp_pl2_override = 64,
   5         }"
   6
   7         register "SerialIoDevMode" = "{
   8                 [PchSerialIoIndexI2C0] = PchSerialIoPci,
   9                 [PchSerialIoIndexI2C1] = PchSerialIoPci,
  10                 [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
  11                 [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
  12                 [PchSerialIoIndexI2C4] = PchSerialIoPci,
  13                 [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
  14                 [PchSerialIoIndexSPI0] = PchSerialIoPci,
  15                 [PchSerialIoIndexSPI1] = PchSerialIoPci,
  16                 [PchSerialIoIndexSPI2] = PchSerialIoDisabled,
  17                 [PchSerialIoIndexUART0] = PchSerialIoSkipInit,
  18                 [PchSerialIoIndexUART1] = PchSerialIoDisabled,
  19                 [PchSerialIoIndexUART2] = PchSerialIoDisabled,
  20         }"
  21
  22         # No PCIe WiFi
  23         register "PcieRpEnable[13]" = "0"
  24
  25         # Intel Common SoC Config
  26         #+-------------------+---------------------------+
  27         #| Field             |  Value                    |
  28         #+-------------------+---------------------------+
  29         #| GSPI1             | FP MCU                    |
  30         #| I2C0              | Trackpad                  |
  31         #| I2C1              | Touchscreen               |
  32         #| I2C4              | Audio                     |
  33         #+-------------------+---------------------------+
  34         register "common_soc_config" = "{
  35                 .i2c[0] = {
  36                         .speed = I2C_SPEED_FAST,
  37                         .rise_time_ns = 50,
  38                         .fall_time_ns = 15,
  39                         .data_hold_time_ns = 330,
  40                 },
  41                 .i2c[1] = {
  42                         .speed = I2C_SPEED_FAST,
  43                         .rise_time_ns = 60,
  44                         .fall_time_ns = 25,
  45                 },
  46                 .i2c[3] = {
  47                         .speed = I2C_SPEED_FAST,
  48                         .rise_time_ns = 150,
  49                         .fall_time_ns = 150,
  50                 },
  51                 .i2c[4] = {
  52                         .speed = I2C_SPEED_FAST,
  53                         .rise_time_ns = 120,
  54                         .fall_time_ns = 120,
  55                 },
  56                 .gspi[0] = {
  57                        .speed_mhz = 1,
  58                        .early_init = 1,
  59                 },
  60         }"
  61
  62         device domain 0 on
  63                 device ref igpu         on
  64                         register "gfx" = "GMA_DEFAULT_PANEL(0)"
  65                 end
  66                 device ref xhci         on
  67                         chip drivers/usb/acpi
  68                                 device ref xhci_root_hub on
  69                                         chip drivers/usb/acpi
  70                                                 # No Type-A port
  71                                                 device ref usb2_port3 off end
  72                                         end
  73                                         chip drivers/usb/acpi
  74                                                 # No Type-A Port
  75                                                 device ref usb2_port4 off end
  76                                         end
  77                                         chip drivers/usb/acpi
  78                                                 # No WWAN
  79                                                 device ref usb2_port6 off end
  80                                         end
  81                                         chip drivers/usb/acpi
  82                                                 # No WWAN
  83                                                 device ref usb3_port5 off end
  84                                         end
  85                                 end
  86                         end
  87                 end
  88                 device ref i2c0         on
  89                         chip drivers/i2c/generic
  90                                 register "hid" = ""ELAN0000""
  91                                 register "desc" = ""ELAN Touchpad""
  92                                 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A21_IRQ)"
  93                                 register "wake" = "GPE0_DW0_21"
  94                                 device i2c 15 on end
  95                         end
  96                 end
  97                 device ref i2c1         on
  98                         chip drivers/i2c/hid
  99                                 register "generic.hid" = ""GDIX0000""
 100                                 register "generic.desc" = ""Goodix Touchscreen""
 101                                 register "generic.irq" =
 102                                         "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
 103                                 register "generic.detect" = "1"
 104                                 register "generic.reset_gpio" =
 105                                         "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
 106                                 register "generic.reset_delay_ms" = "120"
 107                                 register "generic.reset_off_delay_ms" = "1"
 108                                 register "generic.enable_gpio" =
 109                                         "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)"
 110                                 register "generic.enable_delay_ms" = "12"
 111                                 register "generic.enable_off_delay_ms" = "10"
 112                                 register "generic.has_power_resource" = "1"
 113                                 register "generic.stop_gpio" =
 114                                         "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)"
 115                                 register "generic.stop_delay_ms" = "15"
 116                                 register "generic.stop_off_delay_ms" = "5"
 117                                 register "hid_desc_reg_offset" = "0x01"
 118                                 device i2c 5d on end
 119                         end
 120                         chip drivers/generic/gpio_keys
 121                                 register "name" = ""PENH""
 122                                 register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A8)"
 123                                 register "key.wake_gpe" = "GPE0_DW0_08"
 124                                 register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
 125                                 register "key.wakeup_event_action" = "EV_ACT_ASSERTED"
 126                                 register "key.dev_name" = ""EJCT""
 127                                 register "key.linux_code" = "SW_PEN_INSERTED"
 128                                 register "key.linux_input_type" = "EV_SW"
 129                                 register "key.label" = ""pen_eject""
 130                                 device generic 0 on end
 131                         end
 132                 end # I2C 1
 133                 device ref i2c4         on
 134                         chip drivers/i2c/generic
 135                                 register "hid" = ""10EC5682""
 136                                 register "name" = ""RT58""
 137                                 register "desc" = ""Realtek RT5682""
 138                                 register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)"
 139                                 register "property_count" = "1"
 140                                 # Set the jd_src to RT5668_JD1 for jack detection
 141                                 register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
 142                                 register "property_list[0].name" = ""realtek,jd-src""
 143                                 register "property_list[0].integer" = "1"
 144                                 device i2c 1a on end
 145                         end
 146                         chip drivers/i2c/rt1011
 147                                 register "desc" = ""RT1011 Woofer Left Speaker Amp""
 148                                 register "uid" = "0"
 149                                 register "name" = ""RTWL""
 150                                 register "r0_calib_key" = ""dsm_calib_r0_0""
 151                                 register "temperature_calib_key" = ""dsm_calib_temp_0""
 152                                 device i2c 38 on end
 153                         end
 154                         chip drivers/i2c/rt1011
 155                                 register "desc" = ""RT1011 Woofer Right Speaker Amp""
 156                                 register "uid" = "1"
 157                                 register "name" = ""RTWR""
 158                                 register "r0_calib_key" = ""dsm_calib_r0_1""
 159                                 register "temperature_calib_key" = ""dsm_calib_temp_0""
 160                                 device i2c 39 on end
 161                         end
 162                         chip drivers/i2c/rt1011
 163                                 register "desc" = ""RT1011 Tweeter Left Speaker Amp""
 164                                 register "uid" = "2"
 165                                 register "name" = ""RTTL""
 166                                 register "r0_calib_key" = ""dsm_calib_r0_2""
 167                                 register "temperature_calib_key" = ""dsm_calib_temp_0""
 168                                 device i2c 3a on end
 169                         end
 170                         chip drivers/i2c/rt1011
 171                                 register "desc" = ""RT1011 Tweeter Right Speaker Amp""
 172                                 register "uid" = "3"
 173                                 register "name" = ""RTTR""
 174                                 register "r0_calib_key" = ""dsm_calib_r0_3""
 175                                 register "temperature_calib_key" = ""dsm_calib_temp_0""
 176                                 device i2c 3b on end
 177                         end
 178                 end #I2C #4
 179                 device ref gspi1        on
 180                         chip drivers/spi/acpi
 181                                 register "name" = ""CRFP""
 182                                 register "hid" = "ACPI_DT_NAMESPACE_HID"
 183                                 register "uid" = "1"
 184                                 register "compat_string" = ""google,cros-ec-spi""
 185                                 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A23_IRQ)"
 186                                 register "wake" = "GPE0_DW0_23"
 187                                 device spi 1 hidden end
 188                         end # FPMCU
 189                 end
 190                 device ref hda          on
 191                         chip drivers/sof
 192                                 register "spkr_tplg" = "rt1011"
 193                                 register "jack_tplg" = "rt5682"
 194                                 register "mic_tplg" = "_2ch_pdm0"
 195                                 device generic 0 on end
 196                         end
 197                 end
 198         end
 199 end