crossgcc: Upgrade CMake from 3.29.3 to 3.30.2

[coreboot.git] / src / device / pci_device.c

/* SPDX-License-Identifier: GPL-2.0-only */

/*
 * Originally based on the Linux kernel (drivers/pci/pci.c).
 * PCI Bus Services, see include/linux/pci.h for further explanation.
 */

#include <acpi/acpi.h>
#include <assert.h>
#include <cbmem.h>
#include <device/pci_ops.h>
#include <bootmode.h>
#include <console/console.h>
#include <cpu/cpu.h>
#include <stdlib.h>
#include <string.h>
#include <delay.h>
#include <device/cardbus.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pcix.h>
#include <device/pciexp.h>
#include <lib.h>
#include <pc80/i8259.h>
#include <security/vboot/vbnv.h>
#include <timestamp.h>
#include <types.h>

u8 pci_moving_config8(struct device *dev, unsigned int reg)
{
        u8 value, ones, zeroes;

        value = pci_read_config8(dev, reg);

        pci_write_config8(dev, reg, 0xff);
        ones = pci_read_config8(dev, reg);

        pci_write_config8(dev, reg, 0x00);
        zeroes = pci_read_config8(dev, reg);

        pci_write_config8(dev, reg, value);

        return ones ^ zeroes;
}

u16 pci_moving_config16(struct device *dev, unsigned int reg)
{
        u16 value, ones, zeroes;

        value = pci_read_config16(dev, reg);

        pci_write_config16(dev, reg, 0xffff);
        ones = pci_read_config16(dev, reg);

        pci_write_config16(dev, reg, 0x0000);
        zeroes = pci_read_config16(dev, reg);

        pci_write_config16(dev, reg, value);

        return ones ^ zeroes;
}

u32 pci_moving_config32(struct device *dev, unsigned int reg)
{
        u32 value, ones, zeroes;

        value = pci_read_config32(dev, reg);

        pci_write_config32(dev, reg, 0xffffffff);
        ones = pci_read_config32(dev, reg);

        pci_write_config32(dev, reg, 0x00000000);
        zeroes = pci_read_config32(dev, reg);

        pci_write_config32(dev, reg, value);

        return ones ^ zeroes;
}

/**
 * Given a device and register, read the size of the BAR for that register.
 *
 * @param dev Pointer to the device structure.
 * @param index Address of the PCI configuration register.
 * @return TODO
 */
struct resource *pci_get_resource(struct device *dev, unsigned long index)
{
        struct resource *resource;
        unsigned long value, attr;
        resource_t moving, limit;

        /* Initialize the resources to nothing. */
        resource = new_resource(dev, index);

        /* Get the initial value. */
        value = pci_read_config32(dev, index);

        /* See which bits move. */
        moving = pci_moving_config32(dev, index);

        /* Initialize attr to the bits that do not move. */
        attr = value & ~moving;

        /* If it is a 64bit resource look at the high half as well. */
        if (((attr & PCI_BASE_ADDRESS_SPACE_IO) == 0) &&
            ((attr & PCI_BASE_ADDRESS_MEM_LIMIT_MASK) ==
             PCI_BASE_ADDRESS_MEM_LIMIT_64)) {
                /* Find the high bits that move. */
                moving |=
                    ((resource_t)pci_moving_config32(dev, index + 4)) << 32;
        }

        /* Find the resource constraints.
         * Start by finding the bits that move. From there:
         * - Size is the least significant bit of the bits that move.
         * - Limit is all of the bits that move plus all of the lower bits.
         * See PCI Spec 6.2.5.1.
         */
        limit = 0;
        if (moving) {
                resource->size = 1;
                resource->align = resource->gran = 0;
                while (!(moving & resource->size)) {
                        resource->size <<= 1;
                        resource->align += 1;
                        resource->gran += 1;
                }
                resource->limit = limit = moving | (resource->size - 1);

                if (pci_base_address_is_memory_space(attr)) {
                        /* Page-align to allow individual mapping of devices. */
                        if (resource->align < 12)
                                resource->align = 12;
                }
        }

        /*
         * Some broken hardware has read-only registers that do not
         * really size correctly.
         *
         * Example: the Acer M7229 has BARs 1-4 normally read-only,
         * so BAR1 at offset 0x10 reads 0x1f1. If you size that register
         * by writing 0xffffffff to it, it will read back as 0x1f1 -- which
         * is a violation of the spec.
         *
         * We catch this case and ignore it by observing which bits move.
         *
         * This also catches the common case of unimplemented registers
         * that always read back as 0.
         */
        if (moving == 0) {
                if (value != 0) {
                        printk(BIOS_DEBUG, "%s register %02lx(%08lx), read-only ignoring it\n",
                               dev_path(dev), index, value);
                }
                resource->flags = 0;
        } else if (attr & PCI_BASE_ADDRESS_SPACE_IO) {
                /* An I/O mapped base address. */
                resource->flags |= IORESOURCE_IO;
                /* I don't want to deal with 32bit I/O resources. */
                resource->limit = 0xffff;
        } else {
                /* A Memory mapped base address. */
                attr &= PCI_BASE_ADDRESS_MEM_ATTR_MASK;
                resource->flags |= IORESOURCE_MEM;
                if (attr & PCI_BASE_ADDRESS_MEM_PREFETCH) {
                        resource->flags |= IORESOURCE_PREFETCH;
                        if (CONFIG(PCIEXP_HOTPLUG_PREFETCH_MEM_ABOVE_4G)
                            && dev_path_hotplug(dev))
                                resource->flags |= IORESOURCE_ABOVE_4G;
                }
                attr &= PCI_BASE_ADDRESS_MEM_LIMIT_MASK;
                if (attr == PCI_BASE_ADDRESS_MEM_LIMIT_32) {
                        /* 32bit limit. */
                        resource->limit = 0xffffffffUL;
                } else if (attr == PCI_BASE_ADDRESS_MEM_LIMIT_1M) {
                        /* 1MB limit. */
                        resource->limit = 0x000fffffUL;
                } else if (attr == PCI_BASE_ADDRESS_MEM_LIMIT_64) {
                        /* 64bit limit. */
                        resource->limit = 0xffffffffffffffffULL;
                        resource->flags |= IORESOURCE_PCI64;
                } else {
                        /* Invalid value. */
                        printk(BIOS_ERR, "Broken BAR with value %lx\n", attr);
                        printk(BIOS_ERR, " on dev %s at index %02lx\n",
                               dev_path(dev), index);
                        resource->flags = 0;
                }
        }

        /* Don't let the limit exceed which bits can move. */
        if (resource->limit > limit)
                resource->limit = limit;

        return resource;
}

/**
 * Given a device and an index, read the size of the BAR for that register.
 *
 * @param dev Pointer to the device structure.
 * @param index Address of the PCI configuration register.
 */
static void pci_get_rom_resource(struct device *dev, unsigned long index)
{
        struct resource *resource;
        unsigned long value;
        resource_t moving;

        /* Initialize the resources to nothing. */
        resource = new_resource(dev, index);

        /* Get the initial value. */
        value = pci_read_config32(dev, index);

        /* See which bits move. */
        moving = pci_moving_config32(dev, index);

        /* Clear the Enable bit. */
        moving = moving & ~PCI_ROM_ADDRESS_ENABLE;

        /* Find the resource constraints.
         * Start by finding the bits that move. From there:
         * - Size is the least significant bit of the bits that move.
         * - Limit is all of the bits that move plus all of the lower bits.
         * See PCI Spec 6.2.5.1.
         */
        if (moving) {
                resource->size = 1;
                resource->align = resource->gran = 0;
                while (!(moving & resource->size)) {
                        resource->size <<= 1;
                        resource->align += 1;
                        resource->gran += 1;
                }
                resource->limit = moving | (resource->size - 1);
                resource->flags |= IORESOURCE_MEM | IORESOURCE_READONLY;
        } else {
                if (value != 0) {
                        printk(BIOS_DEBUG, "%s register %02lx(%08lx), read-only ignoring it\n",
                               dev_path(dev), index, value);
                }
                resource->flags = 0;
        }
        compact_resources(dev);
}

/**
 * Given a device, read the size of the MSI-X table.
 *
 * @param dev Pointer to the device structure.
 * @return MSI-X table size or 0 if not MSI-X capable device
 */
size_t pci_msix_table_size(struct device *dev)
{
        const size_t pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
        if (!pos)
                return 0;

        const u16 control = pci_read_config16(dev, pos + PCI_MSIX_FLAGS);
        return (control & PCI_MSIX_FLAGS_QSIZE) + 1;
}

/**
 * Given a device, return the table offset and bar the MSI-X tables resides in.
 *
 * @param dev Pointer to the device structure.
 * @param offset Returned value gives the offset in bytes inside the PCI BAR.
 * @param idx The returned value is the index of the PCI_BASE_ADDRESS register
 *            the MSI-X table is located in.
 * @return Zero on success
 */
int pci_msix_table_bar(struct device *dev, u32 *offset, u8 *idx)
{
        const size_t pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
        if (!pos || !offset || !idx)
                return 1;

        *offset = pci_read_config32(dev, pos + PCI_MSIX_TABLE);
        *idx = (u8)(*offset & PCI_MSIX_PBA_BIR);
        *offset &= PCI_MSIX_PBA_OFFSET;

        return 0;
}

/**
 * Given a device, return a msix_entry pointer or NULL if no table was found.
 *
 * @param dev Pointer to the device structure.
 *
 * @return NULL on error
 */
struct msix_entry *pci_msix_get_table(struct device *dev)
{
        struct resource *res;
        u32 offset;
        u8 idx;

        if (pci_msix_table_bar(dev, &offset, &idx))
                return NULL;

        if (idx > 5)
                return NULL;

        res = probe_resource(dev, idx * 4 + PCI_BASE_ADDRESS_0);
        if (!res || !res->base || offset >= res->size)
                return NULL;

        if ((res->flags & IORESOURCE_PCI64) &&
            (uintptr_t)res->base != res->base)
                return NULL;

        return (struct msix_entry *)((uintptr_t)res->base + offset);
}

static unsigned int get_rebar_offset(const struct device *dev, unsigned long index)
{
        uint32_t offset = pciexp_find_extended_cap(dev, PCIE_EXT_CAP_RESIZABLE_BAR, 0);
        if (!offset)
                return 0;

        /* Convert PCI_BASE_ADDRESS_0, ..._1, ..._2 into 0, 1, 2... */
        const unsigned int find_bar_idx = (index - PCI_BASE_ADDRESS_0) /
                sizeof(uint32_t);

        /* Although all of the Resizable BAR Control Registers contain an
           "NBARs" field, it is only valid in the Control Register for BAR 0 */
        const uint32_t rebar_ctrl0 = pci_read_config32(dev, offset + PCI_REBAR_CTRL_OFFSET);
        const unsigned int nbars = (rebar_ctrl0 & PCI_REBAR_CTRL_NBARS_MASK) >>
                PCI_REBAR_CTRL_NBARS_SHIFT;

        for (unsigned int i = 0; i < nbars; i++, offset += sizeof(uint64_t)) {
                const uint32_t rebar_ctrl = pci_read_config32(
                        dev, offset + PCI_REBAR_CTRL_OFFSET);
                const uint32_t bar_idx = rebar_ctrl & PCI_REBAR_CTRL_IDX_MASK;
                if (bar_idx == find_bar_idx)
                        return offset;
        }

        return 0;
}

/* Bit 20 = 1 MiB, bit 21 = 2 MiB, bit 22 = 4 MiB, ... bit 63 = 8 EiB */
static uint64_t get_rebar_sizes_mask(const struct device *dev,
                                     unsigned long index)
{
        uint64_t size_mask = 0ULL;
        const uint32_t offset = get_rebar_offset(dev, index);
        if (!offset)
                return 0;

        /* Get 1 MB - 128 TB support from CAP register */
        const uint32_t cap = pci_read_config32(dev, offset + PCI_REBAR_CAP_OFFSET);
        /* Shift the bits from 4-31 to 0-27 (i.e., down by 4 bits) */
        size_mask |= ((cap & PCI_REBAR_CAP_SIZE_MASK) >> 4);

        /* Get 256 TB - 8 EB support from CTRL register and store it in bits 28-43 */
        const uint64_t ctrl = pci_read_config32(dev, offset + PCI_REBAR_CTRL_OFFSET);
        /* Shift ctrl mask from bit 16 to bit 28, so that the two
           masks (fom cap and ctrl) form a contiguous bitmask when
           concatenated (i.e., up by 12 bits). */
        size_mask |= ((ctrl & PCI_REBAR_CTRL_SIZE_MASK) << 12);

        /* Now that the mask occupies bits 0-43, shift it up to 20-63, so they
           represent the actual powers of 2. */
        return size_mask << 20;
}

static void pci_store_rebar_size(const struct device *dev,
                                 const struct resource *resource)
{
        const unsigned int num_bits = __fls64(resource->size);
        const uint32_t offset = get_rebar_offset(dev, resource->index);
        if (!offset)
                return;

        pci_update_config32(dev, offset + PCI_REBAR_CTRL_OFFSET,
                            ~PCI_REBAR_CTRL_SIZE_MASK,
                            num_bits << PCI_REBAR_CTRL_SIZE_SHIFT);
}

static void configure_adjustable_base(const struct device *dev,
                                      unsigned long index,
                                      struct resource *res)
{
        /*
         * Excerpt from an implementation note from the PCIe spec:
         *
         * System software uses this capability in place of the above mentioned
         * method of determining the resource size[0], and prior to assigning
         * the base address to the BAR. Potential usable resource sizes are
         * reported by the Function via its Resizable BAR Capability and Control
         * registers. It is intended that the software allocate the largest of
         * the reported sizes that it can, since allocating less address space
         * than the largest reported size can result in lower
         * performance. Software then writes the size to the Resizable BAR
         * Control register for the appropriate BAR for the Function. Following
         * this, the base address is written to the BAR.
         *
         * [0] Referring to using the moving bits in the BAR to determine the
         *     requested size of the MMIO region
         */
        const uint64_t size_mask = get_rebar_sizes_mask(dev, index);
        if (!size_mask)
                return;

        int max_requested_bits = __fls64(size_mask);
        if (max_requested_bits > CONFIG_PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS) {
                printk(BIOS_WARNING, "Device %s requests a BAR with"
                       " %u bits of address space, which coreboot is not"
                       " configured to hand out, truncating to %u bits\n",
                       dev_path(dev), max_requested_bits,
                       CONFIG_PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS);
                max_requested_bits = CONFIG_PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS;
        }

        if (!(res->flags & IORESOURCE_PCI64) && max_requested_bits > 32) {
                printk(BIOS_ERR, "Resizable BAR requested"
                       " above 32 bits, but PCI function reported a"
                       " 32-bit BAR.");
                return;
        }

        /* Configure the resource parameters for the adjustable BAR */
        res->size = 1ULL << max_requested_bits;
        res->align = max_requested_bits;
        res->gran = max_requested_bits;
        res->limit = (res->flags & IORESOURCE_PCI64) ? UINT64_MAX : UINT32_MAX;
        res->flags |= (res->flags & IORESOURCE_PCI64) ?
                IORESOURCE_PCIE_RESIZABLE_BAR | IORESOURCE_ABOVE_4G :
                IORESOURCE_PCIE_RESIZABLE_BAR;

        printk(BIOS_INFO, "%s: Adjusting resource index %lu: base: %llx size: %llx "
               "align: %d gran: %d limit: %llx\n",
               dev_path(dev), res->index, res->base, res->size,
               res->align, res->gran, res->limit);
}

/**
 * Read the base address registers for a given device.
 *
 * @param dev Pointer to the dev structure.
 * @param howmany How many registers to read (6 for device, 2 for bridge).
 */
static void pci_read_bases(struct device *dev, unsigned int howmany)
{
        unsigned long index;

        for (index = PCI_BASE_ADDRESS_0;
             (index < PCI_BASE_ADDRESS_0 + (howmany << 2));) {
                struct resource *resource;
                resource = pci_get_resource(dev, index);

                const bool is_pcie = pci_find_capability(dev, PCI_CAP_ID_PCIE) != 0;
                if (CONFIG(PCIEXP_SUPPORT_RESIZABLE_BARS) && is_pcie)
                        configure_adjustable_base(dev, index, resource);

                index += (resource->flags & IORESOURCE_PCI64) ? 8 : 4;
        }

        compact_resources(dev);
}

static void pci_record_bridge_resource(struct device *dev, resource_t moving,
                                       unsigned int index, unsigned long type)
{
        struct resource *resource;
        unsigned long gran;
        resource_t step;

        resource = NULL;

        if (!moving)
                return;

        /* Initialize the constraints on the current bus. */
        resource = new_resource(dev, index);
        resource->size = 0;
        gran = 0;
        step = 1;
        while ((moving & step) == 0) {
                gran += 1;
                step <<= 1;
        }
        resource->gran = gran;
        resource->align = gran;
        resource->limit = moving | (step - 1);
        resource->flags = type | IORESOURCE_PCI_BRIDGE |
                          IORESOURCE_BRIDGE;
}

static void pci_bridge_read_bases(struct device *dev)
{
        resource_t moving_base, moving_limit, moving;

        /* See if the bridge I/O resources are implemented. */
        moving_base = ((u32)pci_moving_config8(dev, PCI_IO_BASE)) << 8;
        moving_base |=
          ((u32)pci_moving_config16(dev, PCI_IO_BASE_UPPER16)) << 16;

        moving_limit = ((u32)pci_moving_config8(dev, PCI_IO_LIMIT)) << 8;
        moving_limit |=
          ((u32)pci_moving_config16(dev, PCI_IO_LIMIT_UPPER16)) << 16;

        moving = moving_base & moving_limit;

        /* Initialize the I/O space constraints on the current bus. */
        pci_record_bridge_resource(dev, moving, PCI_IO_BASE, IORESOURCE_IO);

        /* See if the bridge prefmem resources are implemented. */
        moving_base =
          ((resource_t)pci_moving_config16(dev, PCI_PREF_MEMORY_BASE)) << 16;
        moving_base |=
          ((resource_t)pci_moving_config32(dev, PCI_PREF_BASE_UPPER32)) << 32;

        moving_limit =
          ((resource_t)pci_moving_config16(dev, PCI_PREF_MEMORY_LIMIT)) << 16;
        moving_limit |=
          ((resource_t)pci_moving_config32(dev, PCI_PREF_LIMIT_UPPER32)) << 32;

        moving = moving_base & moving_limit;
        /* Initialize the prefetchable memory constraints on the current bus. */
        pci_record_bridge_resource(dev, moving, PCI_PREF_MEMORY_BASE,
                                   IORESOURCE_MEM | IORESOURCE_PREFETCH);

        /* See if the bridge mem resources are implemented. */
        moving_base = ((u32)pci_moving_config16(dev, PCI_MEMORY_BASE)) << 16;
        moving_limit = ((u32)pci_moving_config16(dev, PCI_MEMORY_LIMIT)) << 16;

        moving = moving_base & moving_limit;

        /* Initialize the memory resources on the current bus. */
        pci_record_bridge_resource(dev, moving, PCI_MEMORY_BASE,
                                   IORESOURCE_MEM);

        compact_resources(dev);
}

void pci_dev_read_resources(struct device *dev)
{
        pci_read_bases(dev, 6);
        pci_get_rom_resource(dev, PCI_ROM_ADDRESS);
}

void pci_bus_read_resources(struct device *dev)
{
        pci_bridge_read_bases(dev);
        pci_read_bases(dev, 2);
        pci_get_rom_resource(dev, PCI_ROM_ADDRESS1);
}

void pci_domain_read_resources(struct device *dev)
{
        struct resource *res;

        /* Initialize the system-wide I/O space constraints. */
        res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
        res->limit = 0xffffUL;
        res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
                     IORESOURCE_ASSIGNED;

        /*
         * Initialize 32-bit memory resource constraints.
         *
         * There are often undeclared chipset resources in lower memory
         * and memory right below the 4G barrier. Hence, only allow
         * one big range from cbmem_top to the configured limit.
         */
        res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
        res->base  = cbmem_top();
        res->limit = CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT - 1;
        res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
                     IORESOURCE_ASSIGNED;

        /* Initialize 64-bit memory resource constraints above 4G. */
        res = new_resource(dev, IOINDEX_SUBTRACTIVE(2, 0));
        res->base  = 4ULL * GiB;
        res->limit = (1ULL << soc_phys_address_size()) - 1;
        res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
                     IORESOURCE_ASSIGNED;
}

void pci_domain_set_resources(struct device *dev)
{
        assign_resources(dev->downstream);
}

static void pci_store_resource(const struct device *const dev,
                               const struct resource *const resource)
{
        unsigned long base_lo, base_hi;

        base_lo = resource->base & 0xffffffff;
        base_hi = (resource->base >> 32) & 0xffffffff;

        /*
         * Some chipsets allow us to set/clear the I/O bit
         * (e.g. VIA 82C686A). So set it to be safe.
         */
        if (resource->flags & IORESOURCE_IO)
                base_lo |= PCI_BASE_ADDRESS_SPACE_IO;

        pci_write_config32(dev, resource->index, base_lo);
        if (resource->flags & IORESOURCE_PCI64)
                pci_write_config32(dev, resource->index + 4, base_hi);
}

static void pci_store_bridge_resource(const struct device *const dev,
                                      struct resource *const resource)
{
        resource_t base, end;

        /*
         * PCI bridges have no enable bit. They are disabled if the base of
         * the range is greater than the limit. If the size is zero, disable
         * by setting the base = limit and end = limit - 2^gran.
         */
        if (resource->size == 0) {
                base = resource->limit;
                end = resource->limit - (1 << resource->gran);
                resource->base = base;
        } else {
                base = resource->base;
                end = resource_end(resource);
        }

        if (resource->index == PCI_IO_BASE) {
                /* Set the I/O ranges. */
                pci_write_config8(dev, PCI_IO_BASE, base >> 8);
                pci_write_config16(dev, PCI_IO_BASE_UPPER16, base >> 16);
                pci_write_config8(dev, PCI_IO_LIMIT, end >> 8);
                pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, end >> 16);
        } else if (resource->index == PCI_MEMORY_BASE) {
                /* Set the memory range. */
                pci_write_config16(dev, PCI_MEMORY_BASE, base >> 16);
                pci_write_config16(dev, PCI_MEMORY_LIMIT, end >> 16);
        } else if (resource->index == PCI_PREF_MEMORY_BASE) {
                /* Set the prefetchable memory range. */
                pci_write_config16(dev, PCI_PREF_MEMORY_BASE, base >> 16);
                pci_write_config32(dev, PCI_PREF_BASE_UPPER32, base >> 32);
                pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, end >> 16);
                pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, end >> 32);
        } else {
                /* Don't let me think I stored the resource. */
                resource->flags &= ~IORESOURCE_STORED;
                printk(BIOS_ERR, "invalid resource->index %lx\n", resource->index);
        }
}

static void pci_set_resource(struct device *dev, struct resource *resource)
{
        /* Make certain the resource has actually been assigned a value. */
        if (!(resource->flags & IORESOURCE_ASSIGNED)) {
                if (resource->flags & IORESOURCE_BRIDGE) {
                        /* If a bridge resource has no value assigned,
                           we can treat it like an empty resource. */
                        resource->size = 0;
                } else {
                        printk(BIOS_ERR, "%s %02lx %s size: 0x%010llx not assigned\n",
                               dev_path(dev), resource->index,
                               resource_type(resource), resource->size);
                        return;
                }
        }

        /* If this resource is fixed don't worry about it. */
        if (resource->flags & IORESOURCE_FIXED)
                return;

        /* If I have already stored this resource don't worry about it. */
        if (resource->flags & IORESOURCE_STORED)
                return;

        /* If the resource is subtractive don't worry about it. */
        if (resource->flags & IORESOURCE_SUBTRACTIVE)
                return;

        /* Only handle PCI memory and I/O resources for now. */
        if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
                return;

        /* Enable the resources in the command register. */
        if (resource->size) {
                if (resource->flags & IORESOURCE_MEM)
                        dev->command |= PCI_COMMAND_MEMORY;
                if (resource->flags & IORESOURCE_IO)
                        dev->command |= PCI_COMMAND_IO;
                if (resource->flags & IORESOURCE_PCI_BRIDGE &&
                    CONFIG(PCI_SET_BUS_MASTER_PCI_BRIDGES))
                        dev->command |= PCI_COMMAND_MASTER;
        }

        /* Now store the resource. */
        resource->flags |= IORESOURCE_STORED;

        if (!(resource->flags & IORESOURCE_PCI_BRIDGE)) {
                if (CONFIG(PCIEXP_SUPPORT_RESIZABLE_BARS) &&
                    (resource->flags & IORESOURCE_PCIE_RESIZABLE_BAR))
                        pci_store_rebar_size(dev, resource);

                pci_store_resource(dev, resource);

        } else {
                pci_store_bridge_resource(dev, resource);
        }

        report_resource_stored(dev, resource, "");
}

void pci_dev_set_resources(struct device *dev)
{
        struct resource *res;
        u8 line;

        for (res = dev->resource_list; res; res = res->next)
                pci_set_resource(dev, res);

        if (dev->downstream && dev->downstream->children)
                assign_resources(dev->downstream);

        /* Set a default latency timer. */
        pci_write_config8(dev, PCI_LATENCY_TIMER, 0x40);

        /* Set a default secondary latency timer. */
        if ((dev->hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE)
                pci_write_config8(dev, PCI_SEC_LATENCY_TIMER, 0x40);

        /* Zero the IRQ settings. */
        line = pci_read_config8(dev, PCI_INTERRUPT_PIN);
        if (line)
                pci_write_config8(dev, PCI_INTERRUPT_LINE, 0);

        /* Set the cache line size, so far 64 bytes is good for everyone. */
        pci_write_config8(dev, PCI_CACHE_LINE_SIZE, 64 >> 2);
}

void pci_dev_enable_resources(struct device *dev)
{
        const struct pci_operations *ops = NULL;
        u16 command;

        /* Set the subsystem vendor and device ID for mainboard devices. */
        if (dev->ops)
                ops = dev->ops->ops_pci;
        if (dev->on_mainboard && ops && ops->set_subsystem) {
                if (CONFIG_SUBSYSTEM_VENDOR_ID)
                        dev->subsystem_vendor = CONFIG_SUBSYSTEM_VENDOR_ID;
                else if (!dev->subsystem_vendor)
                        dev->subsystem_vendor = pci_read_config16(dev,
                                                        PCI_VENDOR_ID);
                if (CONFIG_SUBSYSTEM_DEVICE_ID)
                        dev->subsystem_device = CONFIG_SUBSYSTEM_DEVICE_ID;
                else if (!dev->subsystem_device)
                        dev->subsystem_device = pci_read_config16(dev,
                                                        PCI_DEVICE_ID);

                printk(BIOS_DEBUG, "%s subsystem <- %04x/%04x\n",
                        dev_path(dev), dev->subsystem_vendor,
                        dev->subsystem_device);
                ops->set_subsystem(dev, dev->subsystem_vendor,
                        dev->subsystem_device);
        }
        command = pci_read_config16(dev, PCI_COMMAND);
        command |= dev->command;

        /* v3 has
         * command |= (PCI_COMMAND_PARITY + PCI_COMMAND_SERR);  // Error check.
         */

        printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command);
        pci_write_config16(dev, PCI_COMMAND, command);
}

void pci_bus_enable_resources(struct device *dev)
{
        u16 ctrl;

        /*
         * Enable I/O in command register if there is VGA card
         * connected with (even it does not claim I/O resource).
         */
        if (dev->downstream->bridge_ctrl & PCI_BRIDGE_CTL_VGA)
                dev->command |= PCI_COMMAND_IO;
        ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
        ctrl |= dev->downstream->bridge_ctrl;
        ctrl |= (PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR); /* Error check. */
        printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
        pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);

        pci_dev_enable_resources(dev);
}

void pci_bus_reset(struct bus *bus)
{
        u16 ctl;

        ctl = pci_read_config16(bus->dev, PCI_BRIDGE_CONTROL);
        ctl |= PCI_BRIDGE_CTL_BUS_RESET;
        pci_write_config16(bus->dev, PCI_BRIDGE_CONTROL, ctl);
        mdelay(10);

        ctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
        pci_write_config16(bus->dev, PCI_BRIDGE_CONTROL, ctl);
        delay(1);
}

void pci_dev_set_subsystem(struct device *dev, unsigned int vendor,
                           unsigned int device)
{
        uint8_t offset;

        /* Header type */
        switch (dev->hdr_type & 0x7f) {
        case PCI_HEADER_TYPE_NORMAL:
                offset = PCI_SUBSYSTEM_VENDOR_ID;
                break;
        case PCI_HEADER_TYPE_BRIDGE:
                offset = pci_find_capability(dev, PCI_CAP_ID_SSVID);
                if (!offset)
                        return;
                offset += 4; /* Vendor ID at offset 4 */
                break;
        case PCI_HEADER_TYPE_CARDBUS:
                offset = PCI_CB_SUBSYSTEM_VENDOR_ID;
                break;
        default:
                return;
        }

        if (!vendor || !device) {
                pci_write_config32(dev, offset,
                        pci_read_config32(dev, PCI_VENDOR_ID));
        } else {
                pci_write_config32(dev, offset,
                        ((device & 0xffff) << 16) | (vendor & 0xffff));
        }
}

static int should_run_oprom(struct device *dev, struct rom_header *rom)
{
        static int should_run = -1;

        if (dev->upstream->segment_group) {
                printk(BIOS_ERR, "Only option ROMs of devices in first PCI segment group can "
                                 "be run.\n");
                return 0;
        }

        if (CONFIG(VENDORCODE_ELTAN_VBOOT))
                if (rom != NULL)
                        if (!verified_boot_should_run_oprom(rom))
                                return 0;

        if (should_run >= 0)
                return should_run;

        if (CONFIG(ALWAYS_RUN_OPROM)) {
                should_run = 1;
                return should_run;
        }

        /* Don't run VGA option ROMs, unless we have to print
         * something on the screen before the kernel is loaded.
         */
        should_run = display_init_required();

        if (!should_run)
                printk(BIOS_DEBUG, "Not running VGA Option ROM\n");
        return should_run;
}

static int should_load_oprom(struct device *dev)
{
        /* If S3_VGA_ROM_RUN is disabled, skip running VGA option
         * ROMs when coming out of an S3 resume.
         */
        if (!CONFIG(S3_VGA_ROM_RUN) && acpi_is_wakeup_s3() &&
                ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA))
                return 0;
        if (CONFIG(ALWAYS_LOAD_OPROM))
                return 1;
        if (should_run_oprom(dev, NULL))
                return 1;

        return 0;
}

static void oprom_pre_graphics_stall(void)
{
        if (CONFIG_PRE_GRAPHICS_DELAY_MS)
                mdelay(CONFIG_PRE_GRAPHICS_DELAY_MS);
}

/** Default handler: only runs the relevant PCI BIOS. */
void pci_dev_init(struct device *dev)
{
        struct rom_header *rom, *ram;

        if (!CONFIG(VGA_ROM_RUN))
                return;

        /* Only execute VGA ROMs. */
        if (((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA))
                return;

        if (!should_load_oprom(dev))
                return;
        timestamp_add_now(TS_OPROM_INITIALIZE);

        rom = pci_rom_probe(dev);
        if (rom == NULL)
                return;

        ram = pci_rom_load(dev, rom);
        if (ram == NULL)
                return;
        timestamp_add_now(TS_OPROM_COPY_END);

        if (!should_run_oprom(dev, rom))
                return;

        /* Wait for any configured pre-graphics delay */
        oprom_pre_graphics_stall();

        run_bios(dev, (unsigned long)ram);

        gfx_set_init_done(1);
        printk(BIOS_DEBUG, "VGA Option ROM was run\n");
        timestamp_add_now(TS_OPROM_END);
}

/** Default device operation for PCI devices */
struct pci_operations pci_dev_ops_pci = {
        .set_subsystem = pci_dev_set_subsystem,
};

struct device_operations default_pci_ops_dev = {
        .read_resources   = pci_dev_read_resources,
        .set_resources    = pci_dev_set_resources,
        .enable_resources = pci_dev_enable_resources,
#if CONFIG(HAVE_ACPI_TABLES)
        .write_acpi_tables = pci_rom_write_acpi_tables,
        .acpi_fill_ssdt    = pci_rom_ssdt,
#endif
        .init             = pci_dev_init,
        .ops_pci          = &pci_dev_ops_pci,
};

/** Default device operations for PCI bridges */
struct device_operations default_pci_ops_bus = {
        .read_resources   = pci_bus_read_resources,
        .set_resources    = pci_dev_set_resources,
        .enable_resources = pci_bus_enable_resources,
        .scan_bus         = pci_scan_bridge,
        .reset_bus        = pci_bus_reset,
};

/** Default device operations for PCI devices marked 'hidden' */
static struct device_operations default_hidden_pci_ops_dev = {
        .read_resources   = noop_read_resources,
        .set_resources    = noop_set_resources,
        .scan_bus         = scan_static_bus,
};

/**
 * Check for compatibility to route legacy VGA cycles through a bridge.
 *
 * Originally, when decoding i/o ports for legacy VGA cycles, bridges
 * should only consider the 10 least significant bits of the port address.
 * This means all VGA registers were aliased every 1024 ports!
 *     e.g. 0x3b0 was also decoded as 0x7b0, 0xbb0 etc.
 *
 * To avoid this mess, a bridge control bit (VGA16) was introduced in
 * 2003 to enable decoding of 16-bit port addresses. As we don't want
 * to make this any more complex for now, we use this bit if possible
 * and only warn if it's not supported (in set_vga_bridge_bits()).
 */
static void pci_bridge_vga_compat(struct bus *const bus)
{
        uint16_t bridge_ctrl;

        bridge_ctrl = pci_read_config16(bus->dev, PCI_BRIDGE_CONTROL);

        /* Ensure VGA decoding is disabled during probing (it should
           be by default, but we run blobs nowadays) */
        bridge_ctrl &= ~PCI_BRIDGE_CTL_VGA;
        pci_write_config16(bus->dev, PCI_BRIDGE_CONTROL, bridge_ctrl);

        /* If the upstream bridge doesn't support VGA16, we don't have to check */
        bus->no_vga16 |= bus->dev->upstream->no_vga16;
        if (bus->no_vga16)
                return;

        /* Test if we can enable 16-bit decoding */
        bridge_ctrl |= PCI_BRIDGE_CTL_VGA16;
        pci_write_config16(bus->dev, PCI_BRIDGE_CONTROL, bridge_ctrl);
        bridge_ctrl = pci_read_config16(bus->dev, PCI_BRIDGE_CONTROL);

        bus->no_vga16 = !(bridge_ctrl & PCI_BRIDGE_CTL_VGA16);
}

/**
 * Detect the type of downstream bridge.
 *
 * This function is a heuristic to detect which type of bus is downstream
 * of a PCI-to-PCI bridge. This functions by looking for various capability
 * blocks to figure out the type of downstream bridge. PCI-X, PCI-E, and
 * Hypertransport all seem to have appropriate capabilities.
 *
 * When only a PCI-Express capability is found the type is examined to see
 * which type of bridge we have.
 *
 * @param dev Pointer to the device structure of the bridge.
 * @return Appropriate bridge operations.
 */
static struct device_operations *get_pci_bridge_ops(struct device *dev)
{
#if CONFIG(PCIX_PLUGIN_SUPPORT)
        unsigned int pcixpos;
        pcixpos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
        if (pcixpos) {
                printk(BIOS_DEBUG, "%s subordinate bus PCI-X\n", dev_path(dev));
                return &default_pcix_ops_bus;
        }
#endif
#if CONFIG(PCIEXP_PLUGIN_SUPPORT)
        unsigned int pciexpos;
        pciexpos = pci_find_capability(dev, PCI_CAP_ID_PCIE);
        if (pciexpos) {
                u16 flags;
                flags = pci_read_config16(dev, pciexpos + PCI_EXP_FLAGS);
                switch ((flags & PCI_EXP_FLAGS_TYPE) >> 4) {
                case PCI_EXP_TYPE_ROOT_PORT:
                case PCI_EXP_TYPE_UPSTREAM:
                case PCI_EXP_TYPE_DOWNSTREAM:
                        printk(BIOS_DEBUG, "%s subordinate bus PCI Express\n",
                               dev_path(dev));
                        if (CONFIG(PCIEXP_HOTPLUG)) {
                                u16 sltcap;
                                sltcap = pci_read_config16(dev, pciexpos + PCI_EXP_SLTCAP);
                                if (sltcap & PCI_EXP_SLTCAP_HPC) {
                                        printk(BIOS_DEBUG, "%s hot-plug capable\n",
                                               dev_path(dev));
                                        return &default_pciexp_hotplug_ops_bus;
                                }
                        }
                        return &default_pciexp_ops_bus;
                case PCI_EXP_TYPE_PCI_BRIDGE:
                        printk(BIOS_DEBUG, "%s subordinate PCI\n",
                               dev_path(dev));
                        return &default_pci_ops_bus;
                default:
                        break;
                }
        }
#endif
        return &default_pci_ops_bus;
}

/**
 * Check if a device id matches a PCI driver entry.
 *
 * The driver entry can either point at a zero terminated array of acceptable
 * device IDs, or include a single device ID.
 *
 * @param driver pointer to the PCI driver entry being checked
 * @param device_id PCI device ID of the device being matched
 */
static int device_id_match(struct pci_driver *driver, unsigned short device_id)
{
        if (driver->devices) {
                unsigned short check_id;
                const unsigned short *device_list = driver->devices;
                while ((check_id = *device_list++) != 0)
                        if (check_id == device_id)
                                return 1;
        }

        return (driver->device == device_id);
}

/**
 * Set up PCI device operation.
 *
 * Check if it already has a driver. If not, use find_device_operations(),
 * or set to a default based on type.
 *
 * @param dev Pointer to the device whose pci_ops you want to set.
 * @see pci_drivers
 */
static void set_pci_ops(struct device *dev)
{
        struct pci_driver *driver;

        if (dev->ops)
                return;

        /*
         * Look through the list of setup drivers and find one for
         * this PCI device.
         */
        for (driver = &_pci_drivers[0]; driver != &_epci_drivers[0]; driver++) {
                if ((driver->vendor == dev->vendor) &&
                    device_id_match(driver, dev->device)) {
                        dev->ops = (struct device_operations *)driver->ops;
                        break;
                }
        }

        if (dev->ops) {
                printk(BIOS_SPEW, "%s [%04x/%04x] %sops\n", dev_path(dev),
                       driver->vendor, driver->device, (driver->ops->scan_bus ? "bus " : ""));
                return;
        }

        /* If I don't have a specific driver use the default operations. */
        switch (dev->hdr_type & 0x7f) { /* Header type */
        case PCI_HEADER_TYPE_NORMAL:
                if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
                        goto bad;
                dev->ops = &default_pci_ops_dev;
                break;
        case PCI_HEADER_TYPE_BRIDGE:
                if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
                        goto bad;
                dev->ops = get_pci_bridge_ops(dev);
                break;
#if CONFIG(CARDBUS_PLUGIN_SUPPORT)
        case PCI_HEADER_TYPE_CARDBUS:
                dev->ops = &default_cardbus_ops_bus;
                break;
#endif
        default:
bad:
                if (dev->enabled) {
                        printk(BIOS_ERR,
                               "%s [%04x/%04x/%06x] has unknown header type %02x, ignoring.\n",
                               dev_path(dev), dev->vendor, dev->device,
                               dev->class >> 8, dev->hdr_type);
                }
        }
}

/**
 * See if we have already allocated a device structure for a given devfn.
 *
 * Given a PCI bus structure and a devfn number, find the device structure
 * corresponding to the devfn, if present. Then move the device structure
 * as the last child on the bus.
 *
 * @param bus Pointer to the bus structure.
 * @param devfn A device/function number.
 * @return Pointer to the device structure found or NULL if we have not
 *         allocated a device for this devfn yet.
 */
static struct device *pci_scan_get_dev(struct bus *bus, unsigned int devfn)
{
        struct device *dev, **prev;

        prev = &bus->children;
        for (dev = bus->children; dev; dev = dev->sibling) {
                if (dev->path.type == DEVICE_PATH_PCI && dev->path.pci.devfn == devfn) {
                        /* Unlink from the list. */
                        *prev = dev->sibling;
                        dev->sibling = NULL;
                        break;
                }
                prev = &dev->sibling;
        }

        /*
         * Just like alloc_dev() add the device to the list of devices on the
         * bus. When the list of devices was formed we removed all of the
         * parents children, and now we are interleaving static and dynamic
         * devices in order on the bus.
         */
        if (dev) {
                struct device *child;

                /* Find the last child on the bus. */
                for (child = bus->children; child && child->sibling;)
                        child = child->sibling;

                /* Place the device as last on the bus. */
                if (child)
                        child->sibling = dev;
                else
                        bus->children = dev;
        }

        return dev;
}

/**
 * Scan a PCI bus.
 *
 * Determine the existence of a given PCI device. Allocate a new struct device
 * if dev==NULL was passed in and the device exists in hardware.
 *
 * @param dev Pointer to the dev structure.
 * @param bus Pointer to the bus structure.
 * @param devfn A device/function number to look at.
 * @return The device structure for the device (if found), NULL otherwise.
 */
struct device *pci_probe_dev(struct device *dev, struct bus *bus,
                                unsigned int devfn)
{
        u32 id, class;
        u8 hdr_type;

        /* Detect if a device is present. */
        if (!dev) {
                struct device dummy;

                dummy.upstream = bus;
                dummy.path.type = DEVICE_PATH_PCI;
                dummy.path.pci.devfn = devfn;

                id = pci_read_config32(&dummy, PCI_VENDOR_ID);
                /*
                 * Have we found something? Some broken boards return 0 if a
                 * slot is empty, but the expected answer is 0xffffffff.
                 */
                if (id == 0xffffffff)
                        return NULL;

                if ((id == 0x00000000) || (id == 0x0000ffff) ||
                    (id == 0xffff0000)) {
                        printk(BIOS_SPEW, "%s, bad id 0x%x\n",
                               dev_path(&dummy), id);
                        return NULL;
                }
                dev = alloc_dev(bus, &dummy.path);
        } else {
                /*
                 * Enable/disable the device. Once we have found the device-
                 * specific operations this operations we will disable the
                 * device with those as well.
                 *
                 * This is geared toward devices that have subfunctions
                 * that do not show up by default.
                 *
                 * If a device is a stuff option on the motherboard
                 * it may be absent and enable_dev() must cope.
                 */
                /* Run the magic enable sequence for the device. */
                if (dev->chip_ops && dev->chip_ops->enable_dev)
                        dev->chip_ops->enable_dev(dev);

                /* Now read the vendor and device ID. */
                id = pci_read_config32(dev, PCI_VENDOR_ID);

                /*
                 * If the device does not have a PCI ID disable it. Possibly
                 * this is because we have already disabled the device. But
                 * this also handles optional devices that may not always
                 * show up.
                 */
                /* If the chain is fully enumerated quit */
                if ((id == 0xffffffff) || (id == 0x00000000) ||
                    (id == 0x0000ffff) || (id == 0xffff0000)) {
                        if (dev->enabled) {
                                printk(BIOS_INFO,
                                       "PCI: Static device %s not found, disabling it.\n",
                                       dev_path(dev));
                                dev->enabled = 0;
                        }
                        return dev;
                }
        }

        /* Read the rest of the PCI configuration information. */
        hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
        class = pci_read_config32(dev, PCI_CLASS_REVISION);

        /* Store the interesting information in the device structure. */
        dev->vendor = id & 0xffff;
        dev->device = (id >> 16) & 0xffff;
        dev->hdr_type = hdr_type;

        /* Class code, the upper 3 bytes of PCI_CLASS_REVISION. */
        dev->class = class >> 8;

        /* Architectural/System devices always need to be bus masters. */
        if ((dev->class >> 16) == PCI_BASE_CLASS_SYSTEM &&
            CONFIG(PCI_ALLOW_BUS_MASTER_ANY_DEVICE))
                dev->command |= PCI_COMMAND_MASTER;

        /*
         * Look at the vendor and device ID, or at least the header type and
         * class and figure out which set of configuration methods to use.
         * Unless we already have some PCI ops.
         */
        set_pci_ops(dev);

        /* Now run the magic enable/disable sequence for the device. */
        if (dev->ops && dev->ops->enable)
                dev->ops->enable(dev);

        /* Display the device. */
        printk(BIOS_DEBUG, "%s [%04x/%04x] %s%s\n", dev_path(dev),
               dev->vendor, dev->device, dev->enabled ? "enabled" : "disabled",
               dev->ops ? "" : " No operations");

        return dev;
}

/**
 * Test for match between romstage and ramstage device instance.
 *
 * @param dev Pointer to the device structure.
 * @param sdev Simple device model identifier, created with PCI_DEV().
 * @return Non-zero if bus:dev.fn of device matches.
 */
unsigned int pci_match_simple_dev(struct device *dev, pci_devfn_t sdev)
{
        return dev->upstream->secondary == PCI_DEV2BUS(sdev) &&
                dev->upstream->segment_group == PCI_DEV2SEG(sdev) &&
                dev->path.pci.devfn == PCI_DEV2DEVFN(sdev);
}

/**
 * Test whether a capability is available along the whole path from the given
 * device to the host bridge.
 *
 * @param dev Pointer to the device structure.
 * @param cap PCI_CAP_LIST_ID of the PCI capability we're looking for.
 * @return The next matching capability of the given device, if it is available
 * along the whole path, or zero if not.
 */
uint16_t pci_find_cap_recursive(const struct device *dev, uint16_t cap)
{
        assert(dev->upstream);
        uint16_t pos = pci_find_capability(dev, cap);
        const struct device *bridge = dev->upstream->dev;
        while (bridge && (bridge->path.type == DEVICE_PATH_PCI)) {
                assert(bridge->upstream);
                if (!pci_find_capability(bridge, cap))
                        return 0;
                bridge = bridge->upstream->dev;
        }
        return pos;
}

/**
 * PCI devices that are marked as "hidden" do not get probed. However, the same
 * initialization logic is still performed as if it were. This is useful when
 * devices would like to be described in the devicetree.cb file, and/or present
 * static PCI resources to the allocator, but the platform firmware hides the
 * device (makes the device invisible to PCI enumeration) before PCI enumeration
 * takes place.
 *
 * The expected semantics of PCI devices marked as 'hidden':
 * 1) The device is actually present under the specified BDF
 * 2) The device config space can still be accessed somehow, but the Vendor ID
 *     indicates there is no device there (it reads as 0xffffffff).
 * 3) The device may still consume PCI resources. Typically, these would have
 *     been hardcoded elsewhere.
 *
 * @param dev Pointer to the device structure.
 */
static void pci_scan_hidden_device(struct device *dev)
{
        if (dev->chip_ops && dev->chip_ops->enable_dev)
                dev->chip_ops->enable_dev(dev);

        /*
         * If chip_ops->enable_dev did not set dev->ops, then set to a default
         * .ops, because PCI enumeration is effectively being skipped, therefore
         * no PCI driver will bind to this device. However, children may want to
         * be enumerated, so this provides scan_static_bus for the .scan_bus
         * callback.
         */
        if (dev->ops == NULL)
                dev->ops = &default_hidden_pci_ops_dev;

        if (dev->ops->enable)
                dev->ops->enable(dev);

        /* Display the device almost as if it were probed normally */
        printk(BIOS_DEBUG, "%s [0000/%04x] hidden%s\n", dev_path(dev),
               dev->device, dev->ops ? "" : " No operations");
}

/**
 * A PCIe Downstream Port normally leads to a Link with only Device 0 on it
 * (PCIe spec r5.0, sec 7.3.1).  As an optimization, scan only for Device 0 in
 * that situation.
 *
 * @param bus Pointer to the bus structure.
 */
static bool pci_bus_only_one_child(struct bus *bus)
{
        struct device *bridge = bus->dev;
        u16 pcie_pos, pcie_flags_reg;
        int pcie_type;

        if (!bridge)
                return false;

        if (bridge->path.type != DEVICE_PATH_PCI)
                return false;

        pcie_pos = pci_find_capability(bridge, PCI_CAP_ID_PCIE);
        if (!pcie_pos)
                return false;

        pcie_flags_reg = pci_read_config16(bridge, pcie_pos + PCI_EXP_FLAGS);

        pcie_type = (pcie_flags_reg & PCI_EXP_FLAGS_TYPE) >> 4;

        return pciexp_is_downstream_port(pcie_type);
}

/**
 * Scan a PCI bus.
 *
 * Determine the existence of devices and bridges on a PCI bus. If there are
 * bridges on the bus, recursively scan the buses behind the bridges.
 *
 * @param bus Pointer to the bus structure.
 * @param min_devfn Minimum devfn to look at in the scan, usually 0x00.
 * @param max_devfn Maximum devfn to look at in the scan, usually 0xff.
 */
void pci_scan_bus(struct bus *bus, unsigned int min_devfn,
                          unsigned int max_devfn)
{
        unsigned int devfn;
        struct device *dev, **prev;
        int once = 0;

        printk(BIOS_DEBUG, "PCI: %s for segment group %02x bus %02x\n", __func__,
               bus->segment_group, bus->secondary);

        /* Maximum sane devfn is 0xFF. */
        if (max_devfn > 0xff) {
                printk(BIOS_ERR, "PCI: %s limits devfn %x - devfn %x\n",
                       __func__, min_devfn, max_devfn);
                printk(BIOS_ERR, "PCI: %s upper limit too big. Using 0xff.\n", __func__);
                max_devfn=0xff;
        }

        post_code(POSTCODE_ENTER_PCI_SCAN_BUS);

        if (pci_bus_only_one_child(bus))
                max_devfn = MIN(max_devfn, 0x07);

        /*
         * Probe all devices/functions on this bus with some optimization for
         * non-existence and single function devices.
         */
        for (devfn = min_devfn; devfn <= max_devfn; devfn++) {
                if (CONFIG(MINIMAL_PCI_SCANNING)) {
                        dev = pcidev_path_behind(bus, devfn);
                        if (!dev || !dev->mandatory)
                                continue;
                }

                /* First thing setup the device structure. */
                dev = pci_scan_get_dev(bus, devfn);

                /* Devices marked 'hidden' do not get probed */
                if (dev && dev->hidden) {
                        pci_scan_hidden_device(dev);

                        /* Skip pci_probe_dev, go to next devfn */
                        continue;
                }

                /* See if a device is present and setup the device structure. */
                dev = pci_probe_dev(dev, bus, devfn);

                /*
                 * If this is not a multi function device, or the device is
                 * not present don't waste time probing another function.
                 * Skip to next device.
                 */
                if ((PCI_FUNC(devfn) == 0x00) && (!dev
                     || (dev->enabled && ((dev->hdr_type & 0x80) != 0x80)))) {
                        devfn += 0x07;
                }
        }

        /*
         * Warn if any leftover static devices are found.
         * There's probably a problem in devicetree.cb.
         */

        prev = &bus->children;
        for (dev = bus->children; dev; dev = dev->sibling) {
                /*
                 * If static device is not PCI then enable it here and don't
                 * treat it as a leftover device.
                 */
                if (dev->path.type != DEVICE_PATH_PCI) {
                        enable_static_device(dev);
                        continue;
                }

                /*
                 * The device is only considered leftover if it is not hidden
                 * and it has a Vendor ID of 0 (the default for a device that
                 * could not be probed).
                 */
                if (dev->vendor != 0 || dev->hidden) {
                        prev = &dev->sibling;
                        continue;
                }

                /* Unlink it from list. */
                *prev = dev->sibling;

                if (!once++)
                        printk(BIOS_WARNING, "PCI: Leftover static devices:\n");
                printk(BIOS_WARNING, "%s\n", dev_path(dev));
        }

        if (once)
                printk(BIOS_WARNING, "PCI: Check your devicetree.cb.\n");

        /*
         * For all children that implement scan_bus() (i.e. bridges)
         * scan the bus behind that child.
         */

        scan_bridges(bus);

        /*
         * We've scanned the bus and so we know all about what's on the other
         * side of any bridges that may be on this bus plus any devices.
         * Return how far we've got finding sub-buses.
         */
        post_code(POSTCODE_EXIT_PCI_SCAN_BUS);
}

typedef enum {
        PCI_ROUTE_CLOSE,
        PCI_ROUTE_SCAN,
        PCI_ROUTE_FINAL,
} scan_state;

static void pci_bridge_route(struct bus *link, scan_state state)
{
        struct device *dev = link->dev;
        struct bus *parent = dev->upstream;
        uint8_t primary, secondary, subordinate;

        if (state == PCI_ROUTE_SCAN) {
                link->secondary = parent->subordinate + 1;
                link->subordinate = link->secondary + dev->hotplug_buses;
                link->max_subordinate = parent->max_subordinate
                                                ? parent->max_subordinate
                                                : (PCI_BUSES_PER_SEGMENT_GROUP - 1);
                link->segment_group = parent->segment_group;
        }

        if (link->secondary > link->max_subordinate)
                die("%s: No more busses available!\n", __func__);

        /* This ought to only happen with hotplug buses.  */
        if (link->subordinate > link->max_subordinate) {
                printk(BIOS_WARNING, "%s: Limiting subordinate busses\n", __func__);
                link->subordinate = link->max_subordinate;
        }

        if (state == PCI_ROUTE_CLOSE) {
                primary = 0;
                secondary = 0xff;
                subordinate = 0xfe;
        } else if (state == PCI_ROUTE_SCAN) {
                primary = parent->secondary;
                secondary = link->secondary;
                subordinate = link->max_subordinate;
        } else if (state == PCI_ROUTE_FINAL) {
                primary = parent->secondary;
                secondary = link->secondary;
                subordinate = link->subordinate;
        } else {
                return;
        }

        if (state == PCI_ROUTE_SCAN) {
                /* Clear all status bits and turn off memory, I/O and master enables. */
                link->bridge_cmd = pci_read_config16(dev, PCI_COMMAND);
                pci_write_config16(dev, PCI_COMMAND, 0x0000);
                pci_write_config16(dev, PCI_STATUS, 0xffff);
        }

        /*
         * Configure the bus numbers for this bridge: the configuration
         * transactions will not be propagated by the bridge if it is not
         * correctly configured.
         */
        pci_write_config8(dev, PCI_PRIMARY_BUS, primary);
        pci_write_config8(dev, PCI_SECONDARY_BUS, secondary);
        pci_write_config8(dev, PCI_SUBORDINATE_BUS, subordinate);

        if (state == PCI_ROUTE_FINAL) {
                pci_write_config16(dev, PCI_COMMAND, link->bridge_cmd);
                parent->subordinate = link->subordinate;
        }
}

/**
 * Scan a PCI bridge and the buses behind the bridge.
 *
 * Determine the existence of buses behind the bridge. Set up the bridge
 * according to the result of the scan.
 *
 * This function is the default scan_bus() method for PCI bridge devices.
 *
 * @param dev Pointer to the bridge device.
 * @param do_scan_bus TODO
 */
void do_pci_scan_bridge(struct device *dev,
                                void (*do_scan_bus) (struct bus * bus,
                                                             unsigned int min_devfn,
                                                             unsigned int max_devfn))
{
        struct bus *bus;

        printk(BIOS_SPEW, "%s for %s\n", __func__, dev_path(dev));

        if (dev->downstream == NULL) {
                struct bus *link;
                link = malloc(sizeof(*link));
                if (link == NULL)
                        die("Couldn't allocate a link!\n");
                memset(link, 0, sizeof(*link));
                link->dev = dev;
                dev->downstream = link;
        }

        bus = dev->downstream;

        pci_bridge_vga_compat(bus);

        pci_bridge_route(bus, PCI_ROUTE_SCAN);

        do_scan_bus(bus, 0x00, 0xff);

        pci_bridge_route(bus, PCI_ROUTE_FINAL);
}

/**
 * Scan a PCI bridge and the buses behind the bridge.
 *
 * Determine the existence of buses behind the bridge. Set up the bridge
 * according to the result of the scan.
 *
 * This function is the default scan_bus() method for PCI bridge devices.
 *
 * @param dev Pointer to the bridge device.
 */
void pci_scan_bridge(struct device *dev)
{
        do_pci_scan_bridge(dev, pci_scan_bus);
}

/**
 * Scan a PCI domain.
 *
 * This function is the default scan_bus() method for PCI domains.
 *
 * @param dev Pointer to the domain.
 */
void pci_host_bridge_scan_bus(struct device *dev)
{
        struct bus *link = dev->downstream;
        pci_scan_bus(link, PCI_DEVFN(0, 0), 0xff);
}

void pci_dev_disable_bus_master(const struct device *dev)
{
        pci_update_config16(dev, PCI_COMMAND, ~PCI_COMMAND_MASTER, 0x0);
}

/**
 * Take an INT_PIN number (0, 1 - 4) and convert
 * it to a string ("NO PIN", "PIN A" - "PIN D")
 *
 * @param pin PCI Interrupt Pin number (0, 1 - 4)
 * @return A string corresponding to the pin number or "Invalid"
 */
const char *pin_to_str(int pin)
{
        const char *str[5] = {
                "NO PIN",
                "PIN A",
                "PIN B",
                "PIN C",
                "PIN D",
        };

        if (pin >= 0 && pin <= 4)
                return str[pin];
        else
                return "Invalid PIN, not 0 - 4";
}

/**
 * Get the PCI INT_PIN swizzle for a device defined as:
 *   pin_parent = (pin_child + devn_child) % 4 + 1
 *   where PIN A = 1 ... PIN_D = 4
 *
 * Given a PCI device structure 'dev', find the interrupt pin
 * that will be triggered on its parent bridge device when
 * generating an interrupt.  For example: Device 1:3.2 may
 * use INT_PIN A but will trigger PIN D on its parent bridge
 * device.  In this case, this function will return 4 (PIN D).
 *
 * @param dev A PCI device structure to swizzle interrupt pins for
 * @param *parent_bridge The PCI device structure for the bridge
 *        device 'dev' is attached to
 * @return The interrupt pin number (1 - 4) that 'dev' will
 *         trigger when generating an interrupt
 */
static int swizzle_irq_pins(struct device *dev, struct device **parent_bridge)
{
        struct device *parent;  /* Our current device's parent device */
        struct device *child;           /* The child device of the parent */
        uint8_t parent_bus = 0;         /* Parent Bus number */
        uint16_t parent_devfn = 0;      /* Parent Device and Function number */
        uint16_t child_devfn = 0;       /* Child Device and Function number */
        uint8_t swizzled_pin = 0;       /* Pin swizzled across a bridge */

        /* Start with PIN A = 0 ... D = 3 */
        swizzled_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN) - 1;

        /* While our current device has parent devices */
        child = dev;
        for (parent = child->upstream->dev; parent; parent = parent->upstream->dev) {
                parent_bus = parent->upstream->secondary;
                parent_devfn = parent->path.pci.devfn;
                child_devfn = child->path.pci.devfn;

                /* Swizzle the INT_PIN for any bridges not on root bus */
                swizzled_pin = (PCI_SLOT(child_devfn) + swizzled_pin) % 4;
                printk(BIOS_SPEW, "\tWith INT_PIN swizzled to %s\n"
                        "\tAttached to bridge device %01X:%02Xh.%02Xh\n",
                        pin_to_str(swizzled_pin + 1), parent_bus,
                        PCI_SLOT(parent_devfn), PCI_FUNC(parent_devfn));

                /* Continue until we find the root bus */
                if (parent_bus > 0) {
                        /*
                         * We will go on to the next parent so this parent
                         * becomes the child
                         */
                        child = parent;
                        continue;
                } else {
                        /*
                         *  Found the root bridge device,
                         *  fill in the structure and exit
                         */
                        *parent_bridge = parent;
                        break;
                }
        }

        /* End with PIN A = 1 ... D = 4 */
        return swizzled_pin + 1;
}

/**
 * Given a device structure 'dev', find its interrupt pin
 * and its parent bridge 'parent_bdg' device structure.
 * If it is behind a bridge, it will return the interrupt
 * pin number (1 - 4) of the parent bridge that the device
 * interrupt pin has been swizzled to, otherwise it will
 * return the interrupt pin that is programmed into the
 * PCI config space of the target device.  If 'dev' is
 * behind a bridge, it will fill in 'parent_bdg' with the
 * device structure of the bridge it is behind, otherwise
 * it will copy 'dev' into 'parent_bdg'.
 *
 * @param dev A PCI device structure to get interrupt pins for.
 * @param *parent_bdg The PCI device structure for the bridge
 *        device 'dev' is attached to.
 * @return The interrupt pin number (1 - 4) that 'dev' will
 *         trigger when generating an interrupt.
 *         Errors: -1 is returned if the device is not enabled
 *                 -2 is returned if a parent bridge could not be found.
 */
int get_pci_irq_pins(struct device *dev, struct device **parent_bdg)
{
        uint8_t bus = 0;        /* The bus this device is on */
        uint16_t devfn = 0;     /* This device's device and function numbers */
        uint8_t int_pin = 0;    /* Interrupt pin used by the device */
        uint8_t target_pin = 0; /* Interrupt pin we want to assign an IRQ to */

        /* Make sure this device is enabled */
        if (!(dev->enabled && (dev->path.type == DEVICE_PATH_PCI)))
                return -1;

        bus = dev->upstream->secondary;
        devfn = dev->path.pci.devfn;

        /* Get and validate the interrupt pin used. Only 1-4 are allowed */
        int_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN);
        if (int_pin < 1 || int_pin > 4)
                return -1;

        printk(BIOS_SPEW, "PCI IRQ: Found device %01X:%02X.%02X using %s\n",
                bus, PCI_SLOT(devfn), PCI_FUNC(devfn), pin_to_str(int_pin));

        /* If this device is on a bridge, swizzle its INT_PIN */
        if (bus) {
                /* Swizzle its INT_PINs */
                target_pin = swizzle_irq_pins(dev, parent_bdg);

                /* Make sure the swizzle returned valid structures */
                if (parent_bdg == NULL) {
                        printk(BIOS_WARNING, "Could not find parent bridge for this device!\n");
                        return -2;
                }
        } else {        /* Device is not behind a bridge */
                target_pin = int_pin;   /* Return its own interrupt pin */
                *parent_bdg = dev;              /* Return its own structure */
        }

        /* Target pin is the interrupt pin we want to assign an IRQ to */
        return target_pin;
}

#if CONFIG(PC80_SYSTEM)
/**
 * Assign IRQ numbers.
 *
 * This function assigns IRQs for all functions contained within the indicated
 * device address. If the device does not exist or does not require interrupts
 * then this function has no effect.
 *
 * This function should be called for each PCI slot in your system.
 *
 * @param dev Pointer to dev structure.
 * @param pIntAtoD An array of IRQ #s that are assigned to PINTA through PINTD
 *        of this slot. The particular IRQ #s that are passed in depend on the
 *        routing inside your southbridge and on your board.
 */
void pci_assign_irqs(struct device *dev, const unsigned char pIntAtoD[4])
{
        u8 slot, line, irq;

        /* Each device may contain up to eight functions. */
        slot = dev->path.pci.devfn >> 3;

        for (; dev ; dev = dev->sibling) {
                if (dev->path.pci.devfn >> 3 != slot)
                        break;

                line = pci_read_config8(dev, PCI_INTERRUPT_PIN);

                /* PCI spec says all values except 1..4 are reserved. */
                if ((line < 1) || (line > 4))
                        continue;

                irq = pIntAtoD[line - 1];

                printk(BIOS_DEBUG, "Assigning IRQ %d to %s\n", irq, dev_path(dev));

                pci_write_config8(dev, PCI_INTERRUPT_LINE, irq);

                /* Change to level triggered. */
                i8259_configure_irq_trigger(irq, IRQ_LEVEL_TRIGGERED);
        }
}
#endif