src/mainboard/compulab/intense_pc/devicetree.cb

   1 # SPDX-License-Identifier: GPL-2.0-only
   2
   3 chip northbridge/intel/sandybridge # FIXME: check gfx
   4         register "gfx" = "GMA_STATIC_DISPLAYS(0)"
   5         register "gpu_dp_b_hotplug" = "4"
   6         register "gpu_dp_c_hotplug" = "4"
   7         register "gpu_dp_d_hotplug" = "4"
   8
   9         register "spd_addresses" = "{0x50, 0, 0x52, 0}"
  10
  11         device domain 0 on
  12                 device ref host_bridge on       # Host bridge
  13                         subsystemid 0x8086 0x2010
  14                 end
  15                 device ref peg10 on     # PCIe Bridge for discrete graphics
  16                         subsystemid 0x8086 0x2010
  17                 end
  18                 device ref peg11 on     # PCIe Bridge for discrete graphics
  19                         subsystemid 0x8086 0x2010
  20                 end
  21                 device ref igd on       # Internal graphics VGA controller
  22                         subsystemid 0x8086 0x2211
  23                 end
  24
  25                 subsystemid 0x8086 0x7270 inherit
  26                 chip southbridge/intel/bd82x6x  # Intel Series 6 Cougar Point PCH
  27                         register "docking_supported" = "true"
  28                         register "gen1_dec" = "0x0000164d"
  29                         register "gen2_dec" = "0x000c0681"
  30                         register "gen3_dec" = "0x000406f1"
  31                         register "gen4_dec" = "0x000c06a1"
  32                         register "gpi7_routing" = "2"
  33                         register "pcie_port_coalesce" = "true"
  34                         register "sata_interface_speed_support" = "0x3"
  35                         # Intense PC SATA portmap:
  36                         # Port 0: internal 2.5" bay
  37                         # Port 1: optional FACE module
  38                         # Port 2: rear eSATA
  39                         # Port 3: rear eSATA
  40                         # Port 4: mSATA
  41                         # Port 5: optional FACE module
  42                         # enable ALL ports (FACE module REQUIRED for ports 1&5)
  43                         register "sata_port_map" = "0x3f"
  44                         # enable ONLY ports present on stock MintBox/Intense PC
  45                         #register "sata_port_map" = "0x1d"
  46                         register "superspeed_capable_ports" = "0x0000000f"
  47                         register "xhci_switchable_ports" = "0x0000000f"
  48                         register "spi_uvscc" = "0x2005"
  49                         register "spi_lvscc" = "0x2005"
  50                         register "usb_port_config" = "{
  51                                 { 1, 1, 0 },
  52                                 { 1, 1, 0 },
  53                                 { 1, 1, 1 },
  54                                 { 1, 1, 1 },
  55                                 { 1, 0, 2 },
  56                                 { 1, 0, 2 },
  57                                 { 1, 0, 3 },
  58                                 { 1, 0, 3 },
  59                                 { 1, 1, 4 },
  60                                 { 1, 1, 4 },
  61                                 { 1, 0, 5 },
  62                                 { 1, 0, 5 },
  63                                 { 1, 0, 6 },
  64                                 { 1, 0, 6 }
  65                         }"
  66
  67                         device ref xhci on  end # USB 3.0 Controller
  68                         device ref mei1 off end # Management Engine Interface 1
  69                         device ref mei2 off end # Management Engine Interface 2
  70                         device ref me_ide_r off end     # Management Engine IDE-R
  71                         device ref me_kt off end        # Management Engine KT
  72                         device ref gbe on  end  # Intel Gigabit Ethernet
  73                         device ref ehci2 on  end        # USB2 EHCI #2
  74                         device ref hda on  end  # High Definition Audio
  75                         device ref pcie_rp1 on  end     # PCIe Port #1
  76                         device ref pcie_rp2 on  end     # PCIe Port #2
  77                         device ref pcie_rp3 on  end     # PCIe Port #3
  78                         device ref pcie_rp4 off end     # PCIe Port #4
  79                         device ref pcie_rp5 on  end     # PCIe Port #5
  80                         device ref pcie_rp6 off end     # PCIe Port #6
  81                         device ref pcie_rp7 off end     # PCIe Port #7
  82                         device ref pcie_rp8 off end     # PCIe Port #8
  83                         device ref ehci1 on  end        # USB2 EHCI #1
  84                         device ref pci_bridge off end   # PCI bridge
  85                         device ref lpc on  end  # LPC bridge
  86                         device ref sata1 on  end        # SATA Controller 1
  87                         device ref smbus on  end        # SMBus
  88                         device ref sata2 off end        # SATA Controller 2
  89                         device ref thermal on  end      # Thermal
  90                 end
  91         end
  92 end