?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mb/google/fatcat/var/fatcat: Refactor GPIO programming for UFS support
[coreboot.git] / src / mainboard / google / brya / variants / yavilla / overridetree.cb
blobbe926179dc0c4ec26caec93c8494697bed2a50c9
1 fw_config
2 field DB_USB 0 1
3 option DB_NONE 0
4 option DB_1C_1A 1
5 option DB_1C 2
6 option DB_1C_LTE 3
7 end
8 field WIFI_SAR_ID 2 3
9 option SAR_ID_0 0
10 option SAR_ID_1 1
11 option SAR_ID_2 2
12 option SAR_ID_3 3
13 end
14 field STYLUS 9
15 option STYLUS_ABSENT 0
16 option STYLUS_PRESENT 1
17 end
18 field SD_CARD 10
19 option SD_PRESENT 0
20 option SD_ABSENT 1
21 end
22 field WFC 11
23 option WFC_ABSENT 0
24 option WFC_MIPI_OVTI8856 1
25 end
26 field MB_HDMI 12
27 option HDMI_ABSENT 0
28 option HDMI_PRESENT 1
29 end
30 field MB_USB 15
31 option MB_1C 0
32 option MB_1C_2A 1
33 end
34 field WIFI_SAR_ID2 16 19
35 option INTEL_YAVILLA_LTE 0
36 option INTEL_YAVILLA_WIFI 1
37 option INTEL_YAVILLY_LTE 2
38 option INTEL_YAVILLY_WIFI 3
39 option INTEL_YAVIJO_LTE 4
40 option INTEL_YAVIJO_WIFI 5
41 option UNUSED 15
42 end
43 field TOUCH_PANEL 40 41
44 option TOUCH_ELAN_I2C 0
45 option TOUCH_ELAN_HID_I2C 1
46 option TOUCH_G2_HID_I2c 2
47 end
48 end
49
50 chip soc/intel/alderlake
51 register "sagv" = "SaGv_Enabled"
52
53 # EMMC Tx CMD Delay
54 # Refer to EDS-Vol2-42.3.7.
55 # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
56 # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
57 register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
58
59 # EMMC TX DATA Delay 1
60 # Refer to EDS-Vol2-42.3.8.
61 # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
62 # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
63 register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x909"
64
65 # EMMC TX DATA Delay 2
66 # Refer to EDS-Vol2-42.3.9.
67 # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
68 # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
69 # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
70 # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
71 register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C272828"
72
73 # EMMC RX CMD/DATA Delay 1
74 # Refer to EDS-Vol2-42.3.10.
75 # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
76 # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
77 # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
78 # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
79 register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C171733"
80
81 # EMMC RX CMD/DATA Delay 2
82 # Refer to EDS-Vol2-42.3.12.
83 # [17:16] stands for Rx Clock before Output Buffer,
84 # 00: Rx clock after output buffer,
85 # 01: Rx clock before output buffer,
86 # 10: Automatic selection based on working mode.
87 # 11: Reserved
88 # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
89 # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
90 register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x10024"
91
92 # EMMC Rx Strobe Delay
93 # Refer to EDS-Vol2-42.3.11.
94 # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
95 # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
96 register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1414"
97
98 # Bit 0 - C0 has no redriver, so enable SBU muxing in the SoC.
99 # Bit 2 - C1 has a redriver which does SBU muxing.
100 # Bit 1,3 - AUX lines are not swapped on the motherboard for either C0 or C1.
101 register "tcss_aux_ori" = "1"
102
103 register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
104
105 register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # USB2 WWAN
106 register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for PCIe WLAN
107 register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN
108
109 register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WWAN
110
111 # Configure external V1P05/Vnn/VnnSx Rails
112 register "ext_fivr_settings" = "{
113 .configure_ext_fivr = 1,
114 }"
115
116 # Intel Common SoC Config
117 #+-------------------+---------------------------+
118 #| Field | Value |
119 #+-------------------+---------------------------+
120 #| I2C0 | TPM. Early init is |
121 #| | required to set up a BAR |
122 #| | for TPM communication |
123 #| I2C1 | Touchscreen |
124 #| I2C2 | WCAM |
125 #| I2C3 | Audio |
126 #| I2C5 | Trackpad |
127 #+-------------------+---------------------------+
128 register "common_soc_config" = "{
129 .i2c[0] = {
130 .early_init = 1,
131 .speed = I2C_SPEED_FAST_PLUS,
132 .speed_config[0] = {
133 .speed = I2C_SPEED_FAST_PLUS,
134 .scl_lcnt = 56,
135 .scl_hcnt = 30,
136 .sda_hold = 7,
137 }
138 },
139 .i2c[1] = {
140 .speed = I2C_SPEED_FAST,
141 .speed_config[0] = {
142 .speed = I2C_SPEED_FAST,
143 .scl_lcnt = 158,
144 .scl_hcnt = 79,
145 .sda_hold = 30,
146 }
147 },
148 .i2c[2] = {
149 .speed = I2C_SPEED_FAST,
150 .speed_config[0] = {
151 .speed = I2C_SPEED_FAST,
152 .scl_lcnt = 158,
153 .scl_hcnt = 79,
154 .sda_hold = 7,
155 }
156 },
157 .i2c[3] = {
158 .speed = I2C_SPEED_FAST,
159 .speed_config[0] = {
160 .speed = I2C_SPEED_FAST,
161 .scl_lcnt = 158,
162 .scl_hcnt = 79,
163 .sda_hold = 7,
164 }
165 },
166 .i2c[5] = {
167 .speed = I2C_SPEED_FAST,
168 .speed_config[0] = {
169 .speed = I2C_SPEED_FAST,
170 .scl_lcnt = 158,
171 .scl_hcnt = 79,
172 .sda_hold = 40,
173 }
174 },
175 }"
176
177 device domain 0 on
178 device ref dtt on
179 chip drivers/intel/dptf
180 ## sensor information
181 register "options.tsr[0].desc" = ""CPU""
182 register "options.tsr[1].desc" = ""5V Regulator""
183 register "options.tsr[2].desc" = ""Charger""
184
185 # TODO: below values are initial reference values only
186 ## Passive Policy
187 register "policies.passive" = "{
188 [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
189 [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
190 [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000),
191 [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 75, 5000),
192 }"
193
194 ## Critical Policy
195 register "policies.critical" = "{
196 [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
197 [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
198 [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
199 [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
200 }"
201
202 register "controls.power_limits" = "{
203 .pl1 = {
204 .min_power = 3000,
205 .max_power = 6000,
206 .time_window_min = 28 * MSECS_PER_SEC,
207 .time_window_max = 32 * MSECS_PER_SEC,
208 .granularity = 200
209 },
210 .pl2 = {
211 .min_power = 25000,
212 .max_power = 25000,
213 .time_window_min = 28 * MSECS_PER_SEC,
214 .time_window_max = 32 * MSECS_PER_SEC,
215 .granularity = 1000
216 }
217 }"
218
219 ## Charger Performance Control (Control, mA)
220 register "controls.charger_perf" = "{
221 [0] = { 255, 1700 },
222 [1] = { 24, 1500 },
223 [2] = { 16, 1000 },
224 [3] = { 8, 500 }
225 }"
226
227 device generic 0 on end
228 end
229 end
230 device ref ipu on
231 chip drivers/intel/mipi_camera
232 register "acpi_uid" = "0x50000"
233 register "acpi_name" = ""IPU0""
234 register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
235
236 register "cio2_num_ports" = "1"
237 register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used
238 register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
239 register "cio2_prt[0]" = "1"
240 device generic 0 on end
241 end
242 probe WFC WFC_MIPI_OVTI8856
243 end
244 device ref cnvi_wifi on
245 chip drivers/wifi/generic
246 register "enable_cnvi_ddr_rfim" = "true"
247 device generic 0 on end
248 end
249 end
250 device ref i2c1 on
251 chip drivers/i2c/generic
252 register "hid" = ""ELAN0001""
253 register "desc" = ""ELAN Touchscreen""
254 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
255 register "detect" = "1"
256 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
257 register "reset_delay_ms" = "20"
258 register "reset_off_delay_ms" = "2"
259 register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
260 register "stop_delay_ms" = "280"
261 register "stop_off_delay_ms" = "2"
262 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
263 register "enable_delay_ms" = "1"
264 register "has_power_resource" = "true"
265 device i2c 10 on
266 probe TOUCH_PANEL TOUCH_ELAN_I2C
267 end
268 end
269 chip drivers/i2c/hid
270 register "generic.hid" = ""ELAN2513""
271 register "generic.desc" = ""ELAN Touchscreen""
272 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
273 register "generic.detect" = "1"
274 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
275 register "generic.reset_delay_ms" = "20"
276 register "generic.reset_off_delay_ms" = "2"
277 register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
278 register "generic.stop_delay_ms" = "280"
279 register "generic.stop_off_delay_ms" = "2"
280 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
281 register "generic.enable_delay_ms" = "1"
282 register "generic.has_power_resource" = "1"
283 register "hid_desc_reg_offset" = "0x01"
284 device i2c 10 on
285 probe TOUCH_PANEL TOUCH_ELAN_HID_I2C
286 end
287 end
288 chip drivers/i2c/hid
289 register "generic.hid" = ""ELAN2513""
290 register "generic.desc" = ""ELAN Touchscreen""
291 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
292 register "generic.detect" = "1"
293 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
294 register "generic.reset_delay_ms" = "20"
295 register "generic.reset_off_delay_ms" = "2"
296 register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
297 register "generic.stop_delay_ms" = "280"
298 register "generic.stop_off_delay_ms" = "2"
299 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
300 register "generic.enable_delay_ms" = "1"
301 register "generic.has_power_resource" = "1"
302 register "hid_desc_reg_offset" = "0x01"
303 device i2c 15 on end
304 end
305 chip drivers/i2c/hid
306 register "generic.hid" = ""GTCH7503""
307 register "generic.desc" = ""G2TOUCH Touchscreen""
308 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
309 register "generic.detect" = "1"
310 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
311 register "generic.reset_delay_ms" = "50"
312 register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
313 register "generic.stop_delay_ms" = "100"
314 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
315 register "generic.enable_delay_ms" = "1"
316 register "generic.has_power_resource" = "1"
317 register "hid_desc_reg_offset" = "0x01"
318 device i2c 10 on
319 probe TOUCH_PANEL TOUCH_G2_HID_I2c
320 end
321 end
322 chip drivers/i2c/hid
323 register "generic.hid" = ""GTCH7503""
324 register "generic.desc" = ""G2TOUCH Touchscreen""
325 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
326 register "generic.detect" = "1"
327 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
328 register "generic.reset_delay_ms" = "50"
329 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
330 register "generic.enable_delay_ms" = "1"
331 register "generic.has_power_resource" = "1"
332 register "hid_desc_reg_offset" = "0x01"
333 device i2c 40 on end
334 end
335 chip drivers/generic/gpio_keys
336 register "name" = ""PENH""
337 register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
338 register "key.wake_gpe" = "GPE0_DW2_15"
339 register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
340 register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
341 register "key.dev_name" = ""EJCT""
342 register "key.linux_code" = "SW_PEN_INSERTED"
343 register "key.linux_input_type" = "EV_SW"
344 register "key.label" = ""pen_eject""
345 device generic 0 on
346 probe STYLUS STYLUS_PRESENT
347 end
348 end
349 end
350 device ref i2c2 on
351 chip drivers/intel/mipi_camera
352 register "acpi_hid" = ""OVTI8856""
353 register "acpi_uid" = "0"
354 register "acpi_name" = ""CAM0""
355 register "chip_name" = ""Ov 8856 Camera""
356 register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
357 register "has_power_resource" = "true"
358 register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
359
360 register "ssdb.lanes_used" = "4"
361 register "ssdb.link_used" = "1"
362 register "ssdb.vcm_type" = "0x0C"
363 register "vcm_name" = ""VCM0""
364 register "num_freq_entries" = "2"
365 register "link_freq[0]" = "360000000"
366 register "link_freq[1]" = "180000000"
367 register "remote_name" = ""IPU0""
368
369 #Controls
370 register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
371 register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
372
373 register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
374 register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
375 register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
376
377 #_ON
378 register "on_seq.ops_cnt" = "4"
379 register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
380 register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
381 register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
382 register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
383
384 #_OFF
385 register "off_seq.ops_cnt" = "4"
386 register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
387 register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
388 register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
389 register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
390
391 device i2c 36 on
392 probe WFC WFC_MIPI_OVTI8856
393 end
394 end
395 chip drivers/intel/mipi_camera
396 register "acpi_uid" = "3"
397 register "acpi_name" = ""VCM0""
398 register "chip_name" = ""DW AF DAC""
399 register "device_type" = "INTEL_ACPI_CAMERA_VCM"
400
401 register "vcm_compat" = ""dongwoon,dw9714""
402 register "has_power_resource" = "true"
403 register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
404
405 #Controls
406 register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
407 register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
408 register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
409
410 #_ON
411 register "on_seq.ops_cnt" = "3"
412 register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
413 register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
414 register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
415
416 #_OFF
417 register "off_seq.ops_cnt" = "3"
418 register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
419 register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
420 register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
421
422 device i2c 0C on
423 probe WFC WFC_MIPI_OVTI8856
424 end
425 end
426 chip drivers/intel/mipi_camera
427 register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
428 register "acpi_uid" = "1"
429 register "acpi_name" = ""NVM0""
430 register "chip_name" = ""GT24C08""
431 register "device_type" = "INTEL_ACPI_CAMERA_NVM"
432
433 register "nvm_size" = "0x400"
434 register "nvm_pagesize" = "1"
435 register "nvm_readonly" = "1"
436 register "nvm_width" = "0x08"
437 register "nvm_compat" = ""atmel,24c08""
438
439 device i2c 50 on
440 probe WFC WFC_MIPI_OVTI8856
441 end
442 end
443 end
444 device ref i2c3 on
445 chip drivers/i2c/generic
446 register "hid" = ""RTL5682""
447 register "name" = ""RT58""
448 register "desc" = ""Headset Codec""
449 register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
450 # Set the jd_src to RT5668_JD1 for jack detection
451 register "property_count" = "1"
452 register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
453 register "property_list[0].name" = ""realtek,jd-src""
454 register "property_list[0].integer" = "1"
455 device i2c 1a on end
456 end
457 end
458 device ref i2c5 on
459 chip drivers/i2c/generic
460 register "hid" = ""ELAN0000""
461 register "desc" = ""ELAN Touchpad""
462 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
463 register "wake" = "GPE0_DW2_14"
464 register "detect" = "1"
465 device i2c 15 on end
466 end
467 chip drivers/i2c/hid
468 register "generic.hid" = ""SYNA0000""
469 register "generic.cid" = ""ACPI0C50""
470 register "generic.desc" = ""Synaptics Touchpad""
471 register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
472 register "generic.wake" = "GPE0_DW2_14"
473 register "generic.detect" = "1"
474 register "hid_desc_reg_offset" = "0x20"
475 device i2c 0x2c on end
476 end
477 end
478 device ref hda on
479 chip drivers/generic/max98357a
480 register "hid" = ""MX98360A""
481 register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
482 register "sdmode_delay" = "5"
483 device generic 0 on end
484 end
485 chip drivers/sof
486 register "spkr_tplg" = "max98360a"
487 register "jack_tplg" = "rt5682"
488 register "mic_tplg" = "_2ch_pdm0"
489 device generic 0 on end
490 end
491 end
492 device ref pcie_rp4 on
493 # PCIe 4 WLAN
494 register "pch_pcie_rp[PCH_RP(4)]" = "{
495 .clk_src = 2,
496 .clk_req = 2,
497 .flags = PCIE_RP_LTR | PCIE_RP_AER,
498 }"
499 chip drivers/wifi/generic
500 register "wake" = "GPE0_DW1_03"
501 register "add_acpi_dma_property" = "true"
502 device pci 00.0 on end
503 end
504 end
505 device ref pcie_rp7 off end #PCIE7 no SD card
506 device ref emmc on end
507 device ref ish on
508 chip drivers/intel/ish
509 register "add_acpi_dma_property" = "true"
510 device generic 0 on end
511 end
512 end
513 device ref ufs on end
514 device ref pch_espi on
515 chip ec/google/chromeec
516 use conn0 as mux_conn[0]
517 use conn1 as mux_conn[1]
518 device pnp 0c09.0 on end
519 end
520 end
521 device ref pmc hidden
522 chip drivers/intel/pmc_mux
523 device generic 0 on
524 chip drivers/intel/pmc_mux/conn
525 use usb2_port1 as usb2_port
526 use tcss_usb3_port1 as usb3_port
527 device generic 0 alias conn0 on end
528 end
529 chip drivers/intel/pmc_mux/conn
530 use usb2_port2 as usb2_port
531 use tcss_usb3_port2 as usb3_port
532 device generic 1 alias conn1 on end
533 end
534 end
535 end
536 end
537 device ref tcss_xhci on
538 chip drivers/usb/acpi
539 device ref tcss_root_hub on
540 chip drivers/usb/acpi
541 register "desc" = ""USB3 Type-C Port C0 (MLB)""
542 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
543 register "use_custom_pld" = "true"
544 register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
545 device ref tcss_usb3_port1 on end
546 end
547 chip drivers/usb/acpi
548 register "desc" = ""USB3 Type-C Port C1 (DB)""
549 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
550 register "use_custom_pld" = "true"
551 register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
552 device ref tcss_usb3_port2 on end
553 end
554 end
555 end
556 end
557 device ref xhci on
558 chip drivers/usb/acpi
559 device ref xhci_root_hub on
560 chip drivers/usb/acpi
561 register "desc" = ""USB2 Type-C Port C0 (MLB)""
562 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
563 register "use_custom_pld" = "true"
564 register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
565 device ref usb2_port1 on end
566 end
567 chip drivers/usb/acpi
568 register "desc" = ""USB2 Type-C Port C1 (DB)""
569 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
570 register "use_custom_pld" = "true"
571 register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
572 device ref usb2_port2 on end
573 end
574 chip drivers/usb/acpi
575 register "desc" = ""USB2 Type-A Port A0 (MLB)""
576 register "type" = "UPC_TYPE_A"
577 register "use_custom_pld" = "true"
578 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
579 device ref usb2_port3 on end
580 end
581 chip drivers/usb/acpi
582 register "desc" = ""USB2 Type-A Port A1 (MLB)""
583 register "type" = "UPC_TYPE_A"
584 register "use_custom_pld" = "true"
585 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
586 device ref usb2_port4 on end
587 end
588 chip drivers/usb/acpi
589 register "desc" = ""USB2 WWAN""
590 register "type" = "UPC_TYPE_INTERNAL"
591 device ref usb2_port5 on
592 probe DB_USB DB_1C_LTE
593 end
594 end
595 chip drivers/usb/acpi
596 register "desc" = ""USB2 UFC""
597 register "type" = "UPC_TYPE_INTERNAL"
598 device ref usb2_port6 on end
599 end
600 chip drivers/usb/acpi
601 register "desc" = ""USB2 Bluetooth""
602 register "type" = "UPC_TYPE_INTERNAL"
603 register "reset_gpio" =
604 "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
605 device ref usb2_port8 on end
606 end
607 chip drivers/usb/acpi
608 register "desc" = ""CNVi Bluetooth""
609 register "type" = "UPC_TYPE_INTERNAL"
610 register "reset_gpio" =
611 "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
612 device ref usb2_port10 on end
613 end
614 chip drivers/usb/acpi
615 register "desc" = ""USB3 Type-A Port A0 (MLB)""
616 register "type" = "UPC_TYPE_USB3_A"
617 register "use_custom_pld" = "true"
618 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
619 device ref usb3_port1 on end
620 end
621 chip drivers/usb/acpi
622 register "desc" = ""USB3 Type-A Port A1 (DB)""
623 register "type" = "UPC_TYPE_USB3_A"
624 register "use_custom_pld" = "true"
625 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
626 device ref usb3_port2 on end
627 end
628 chip drivers/usb/acpi
629 register "desc" = ""USB3 WWAN""
630 register "type" = "UPC_TYPE_INTERNAL"
631 device ref usb3_port3 on
632 probe DB_USB DB_1C_LTE
633 end
634 end
635 end
636 end
637 end
638 end
639 end
ast, secure and flexible OpenSource firmware