soc/amd/common/psp/psp_def.h: increase P2C_BUFFER_MAXSIZE

[coreboot.git] / src / mainboard / system76 / rpl / variants / oryp12 / overridetree.cb

# SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/alderlake
        # Support 5600 MT/s memory
        register "max_dram_speed_mts" = "5600"

        device domain 0 on
                subsystemid 0x1558 0x66a6 inherit

                device ref xhci on
                        register "usb2_ports" = "{
                                [0] = USB2_PORT_MID(OC_SKIP),           // J_AUD1
                                [2] = USB2_PORT_MID(OC_SKIP),           // J_TYPEC2
                                [5] = USB2_PORT_MID(OC_SKIP),           // J_USB1
                                [7] = USB2_PORT_MID(OC_SKIP),           // Camera
                                [8] = USB2_PORT_MID(OC_SKIP),           // J_TYPEC1 (TBT)
                                [13] = USB2_PORT_MID(OC_SKIP),          // Bluetooth
                        }"
                        register "usb3_ports" = "{
                                [0] = USB3_PORT_DEFAULT(OC_SKIP),       // J_AUD1
                                [1] = USB3_PORT_DEFAULT(OC_SKIP),       // J_USB1
                                [3] = USB3_PORT_DEFAULT(OC_SKIP),       // J_TYPEC2
                        }"
                end

                device ref i2c0 on
                        # Touchpad I2C bus
                        register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci"
                        chip drivers/i2c/hid
                                register "generic.hid" = ""ELAN0412""
                                register "generic.desc" = ""ELAN Touchpad""
                                register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)"
                                register "generic.detect" = "1"
                                register "hid_desc_reg_offset" = "0x01"
                                device i2c 15 on end
                        end
                        chip drivers/i2c/hid
                                register "generic.hid" = ""FTCS1000""
                                register "generic.desc" = ""FocalTech Touchpad""
                                register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)"
                                register "generic.detect" = "1"
                                register "hid_desc_reg_offset" = "0x01"
                                device i2c 38 on end
                        end
                end
                device ref i2c1 on
                        # Thunderbolt
                        register "serial_io_i2c_mode[PchSerialIoIndexI2C1]" = "PchSerialIoPci"
                end
                device ref i2c2 on
                        # Pantone
                        register "serial_io_i2c_mode[PchSerialIoIndexI2C2]" = "PchSerialIoPci"
                end
                device ref i2c3 on
                        # TAS5825M smart amp
                        register "serial_io_i2c_mode[PchSerialIoIndexI2C3]" = "PchSerialIoPci"
                        chip drivers/i2c/tas5825m
                                register "id" = "0"
                                device i2c 4e on end # (8bit address: 0x9c)
                        end
                end

                device ref pcie5_0 on
                        # GPU
                        register "cpu_pcie_rp[CPU_RP(2)]" = "{
                                .clk_src = 14,
                                .clk_req = 14,
                                .flags = PCIE_RP_LTR | PCIE_RP_AER,
                        }"
                end
                device ref pcie_rp3 on
                        # GLAN
                        register "pch_pcie_rp[PCH_RP(3)]" = "{
                                .clk_src = 13,
                                .clk_req = 13,
                                .flags = PCIE_RP_LTR | PCIE_RP_AER,
                        }"
                end
                device ref pcie_rp5 on
                        # CARD
                        register "pch_pcie_rp[PCH_RP(5)]" = "{
                                .clk_src = 12,
                                .clk_req = 12,
                                .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_HOTPLUG,
                        }"
                end
                device ref pcie_rp8 on
                        # WLAN
                        register "pch_pcie_rp[PCH_RP(8)]" = "{
                                .clk_src = 11,
                                .clk_req = 11,
                                .flags = PCIE_RP_LTR | PCIE_RP_AER,
                        }"
                end
                device ref pcie_rp9 on
                        # SSD1
                        register "pch_pcie_rp[PCH_RP(9)]" = "{
                                .clk_src = 10,
                                .clk_req = 10,
                                .flags = PCIE_RP_LTR | PCIE_RP_AER,
                        }"
                end
                device ref pcie_rp13 on
                        # SSD2
                        register "pch_pcie_rp[PCH_RP(13)]" = "{
                                .clk_src = 9,
                                .clk_req = 9,
                                .flags = PCIE_RP_LTR | PCIE_RP_AER,
                        }"
                end
                device ref pcie_rp25 on
                        # TBT
                        # XXX: AER causes UnsupReq warnings
                        register "pch_pcie_rp[PCH_RP(25)]" = "{
                                .clk_src = 15,
                                .clk_req = 15,
                                .flags = PCIE_RP_LTR | PCIE_RP_HOTPLUG,
                        }"
                end
        end
end