libpayload: configs: Add new config.featuretest to broaden CI
[coreboot.git] / src / superio / fintek / f81803a / f81803a.h
blob77593da1bbf20cfe9b2641cfb8b029b9297636b8
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 /*
4 * Datasheet:
5 * - Name: F81803A
6 */
8 #ifndef SUPERIO_FINTEK_F81803_H
9 #define SUPERIO_FINTEK_F81803_H
11 #define LDN_REG 0x07 /* Not defined under PNP */
12 /* Logical Device Numbers (LDN) */
13 #define F81803A_SP1 0x01 /* UART1 */
14 #define F81803A_SP2 0x02 /* UART2 */
15 #define F81803A_HWM 0x04 /* Hardware Monitor */
16 #define F81803A_KBC 0x05 /* Keyboard/Mouse */
17 #define F81803A_GPIO 0x06 /* General Purpose I/O (GPIO) */
18 #define F81803A_WDT 0x07 /* Watch Dog Timer */
19 #define F81803A_PME 0x0a /* Power Management Events (PME) */
21 /* Global Control Registers */
22 #define CLOCK_SELECT_REG 0x26
23 #define FUNC_PROG_SELECT (1<<3)
24 #define PORT_SELECT_REG 0x27
26 #define TSI_LEVEL_SELECT_REG 0x28 /* FUNC_PROG_SEL = 0 */
27 #define TSI_PIN_SELECT_REG 0x28 /* FUNC_PROG_SEL = 1 */
28 #define MULTI_FUNC_SEL_REG1 0x29
29 #define MULTI_FUNC_SEL_REG2 0x2A
30 #define MULTI_FUNC_SEL_REG3 0x2B
31 #define MULTI_FUNC_SEL_REG 0x2C
32 #define WAKEUP_CONTROL_REG 0x2d
34 /* LUN A - PME, ACPI, ERP */
35 #define PME_DEVICE_ENABLE_REG 0x30
36 #define PME_ENABLE (1<<0)
37 #define PME_ERP_ENABLE_REG 0xE0
38 #define ERP_ENABLE (1<<7)
39 #define ERP_PME_EN (1<<1)
40 #define ERP_PSOUT_EN (1<<0)
41 #define PME_ERP_CONTROL_1_REG 0xE1
42 #define PME_ERP_CONTROL_2_REG 0xE2
43 #define PME_ERP_PSIN_DEBOUNCE_REG 0xE3
44 #define PME_ERP_WAKEUP_ENABLE_REG 0xE8
45 #define PME_ERP_MODE_SELECT_REG 0xEC
46 #define PME_EVENT_ENABLE_1_REG 0xF0
47 #define PME_EVENT_STATUS_1_REG 0xF1
48 #define PME_EVENT_ENABLE_2_REG 0xF2
49 #define PME_EVENT_STATUS_2_REG 0xF3
50 #define PME_ACPI_CONTROL_1_REG 0xF4
51 #define PME_ACPI_CONTROL_2_REG 0xF5
52 #define PME_ACPI_CONTROL_3_REG 0xF6
53 #define PME_ACPI_CONTROL_4_REG 0xF7
54 #define PME_ACPI_CONTROL_5_REG 0xFB
55 #define PME_ACPI_CONTROL_6_REG 0xFC
57 #endif /* SUPERIO_FINTEK_F81803_H */