src/mainboard/samsung/stumpy/devicetree.cb

   1 chip northbridge/intel/sandybridge
   2
   3         # Enable DisplayPort 1 Hotplug with 6ms pulse
   4         register "gpu_dp_d_hotplug" = "0x06"
   5
   6         # Enable DisplayPort 0 Hotplug with 6ms pulse
   7         register "gpu_dp_c_hotplug" = "0x06"
   8
   9         # Enable DVI Hotplug with 6ms pulse
  10         register "gpu_dp_b_hotplug" = "0x06"
  11
  12         register "max_mem_clock_mhz" = "666"
  13
  14         chip cpu/intel/model_206ax
  15                 device cpu_cluster 0 on end
  16
  17                 register "acpi_c1" = "CPU_ACPI_C3"
  18                 register "acpi_c2" = "CPU_ACPI_C6"
  19         end
  20
  21         device domain 0 on
  22                 subsystemid 0x1ae0 0xc000 inherit
  23                 device ref host_bridge on end # host bridge
  24                 device ref igd on end # vga controller
  25
  26                 chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
  27                         # GPI routing
  28                         #  0 No effect (default)
  29                         #  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
  30                         #  2 SCI (if corresponding GPIO_EN bit is also set)
  31                         register "gpi1_routing" = "0"
  32                         register "gpi14_routing" = "2"
  33
  34                         register "sata_port_map" = "0x3"
  35
  36                         register "gen1_dec" = "0x00fc1601"
  37                         # SuperIO range is 0x700-0x73f
  38                         register "gen2_dec" = "0x003c0701"
  39
  40                         device ref mei1 on end # Management Engine Interface 1
  41                         device ref mei2 off end # Management Engine Interface 2
  42                         device ref me_ide_r off end # Management Engine IDE-R
  43                         device ref me_kt off end # Management Engine KT
  44                         device ref gbe off end # Intel Gigabit Ethernet
  45                         device ref ehci2 on end # USB2 EHCI #2
  46                         device ref hda on end # High Definition Audio
  47                         device ref pcie_rp1 on end # PCIe Port #1 (WLAN)
  48                         device ref pcie_rp2 off end # PCIe Port #2
  49                         device ref pcie_rp3 on end # PCIe Port #3 (Debug)
  50                         device ref pcie_rp4 on end # PCIe Port #4 (LAN)
  51                         device ref pcie_rp5 off end # PCIe Port #5
  52                         device ref pcie_rp6 off end # PCIe Port #6
  53                         device ref pcie_rp7 off end # PCIe Port #7
  54                         device ref pcie_rp8 off end # PCIe Port #8
  55                         device ref ehci1 on end # USB2 EHCI #1
  56                         device ref pci_bridge off end # PCI bridge
  57                         device ref lpc on # LPC bridge
  58                                 chip superio/ite/it8772f
  59                                         # Enable GPIO10 as USBPWRON12#
  60                                         # Enable GPIO12 as USBPWRON13#
  61                                         register "gpio_set1" = "0x05"
  62                                         # Enable GPIO22 as SIO_WAEKSCI#
  63                                         register "gpio_set2" = "0x04"
  64                                         # Enable GPIO32 as SIO_EXTSMI#
  65                                         register "gpio_set3" = "0x04"
  66                                         # Enable GPIO45 as LED_POWER#
  67                                         register "gpio_set4" = "0x20"
  68                                         # Enable GPIO51 as USBPWRON8#
  69                                         # Enable GPIO52 as USBPWRON1#
  70                                         register "gpio_set5" = "0x06"
  71                                         # Skip keyboard init
  72                                         register "skip_keyboard" = "true"
  73                                         # Enable PECI on TMPIN3
  74                                         register "peci_tmpin" = "3"
  75                                         # Enable FAN3
  76                                         register "fan3_enable" = "true"
  77
  78                                         device pnp 2e.0 off end # FDC
  79                                         device pnp 2e.1 on # Serial Port 1
  80                                                 io 0x60 = 0x2f8
  81                                                 irq 0x70 = 4
  82                                         end
  83                                         device pnp 2e.4 on # Environment Controller
  84                                                 io 0x60 = 0x700
  85                                                 io 0x62 = 0x710
  86                                         end
  87                                         device pnp 2e.7 on # GPIO
  88                                                 io 0x60 = 0x720
  89                                                 io 0x62 = 0x730
  90                                         end
  91                                         device pnp 2e.5 on
  92                                                 io 0x60 = 0x60
  93                                                 io 0x62 = 0x64
  94                                                 irq 0x70 = 1
  95                                         end # Keyboard
  96                                         device pnp 2e.6 on
  97                                                 irq 0x70 = 12
  98                                         end # Mouse
  99                                         device pnp 2e.a off end # IR
 100                                 end
 101                                 chip drivers/pc80/tpm
 102                                         device pnp 0c31.0 on end
 103                                 end
 104                         end
 105                         device ref sata1 on end # SATA Controller 1
 106                         device ref smbus on end # SMBus
 107                         device ref sata2 off end # SATA Controller 2
 108                         device ref thermal on end # Thermal
 109                 end
 110         end
 111 end