mb/google/brya/var/orisa: Update Type C DisplayPort HPD Configuration
[coreboot2.git] / src / mainboard / google / brya / variants / redrix4es / fw_config.c
blobac31d99c44c6f362aad7a8093a3829620944be5e
1 /* SPDX-License-Identifier: GPL-2.0-only */
3 #include <bootstate.h>
4 #include <console/console.h>
5 #include <fw_config.h>
6 #include <gpio.h>
8 static const struct pad_config dmic_enable_pads[] = {
9 PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), /* DMIC_CLK0_R */
10 PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), /* DMIC_DATA0_R */
14 static const struct pad_config dmic_disable_pads[] = {
15 PAD_NC(GPP_R4, NONE),
16 PAD_NC(GPP_R5, NONE),
19 static const struct pad_config i2s_enable_pads[] = {
20 PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), /* I2S_HP_SCLK_R */
21 PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), /* I2S_HP_SFRM_R */
22 PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), /* I2S_PCH_TX_HP_RX_STRAP */
23 PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), /* I2S_PCH_RX_HP_TX */
24 PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), /* I2S_SPKR_SCLK_R */
25 PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), /* I2S_SPKR_SFRM_R */
26 PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), /* I2S_PCH_TX_SPKR_RX_R */
27 PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), /* I2S_PCH_RX_SPKR_TX */
30 static const struct pad_config i2s_disable_pads[] = {
31 PAD_NC(GPP_R0, NONE),
32 PAD_NC(GPP_R1, NONE),
33 PAD_NC(GPP_R2, NONE),
34 PAD_NC(GPP_R3, NONE),
35 PAD_NC(GPP_S0, NONE),
36 PAD_NC(GPP_S1, NONE),
37 PAD_NC(GPP_S2, NONE),
38 PAD_NC(GPP_S3, NONE),
41 static const struct pad_config bt_i2s_enable_pads[] = {
42 PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3), /* BT_I2S_BCLK */
43 PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3), /* BT_I2S_SYNC */
44 PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3), /* BT_I2S_SDO */
45 PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3), /* BT_I2S_SDI */
46 PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), /* SSP2_SCLK */
47 PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), /* SSP2_SFRM */
48 PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), /* SSP_TXD */
49 PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), /* SSP_RXD */
52 static void fw_config_handle(void *unused)
54 if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) {
55 printk(BIOS_INFO, "Disable audio related GPIO pins.\n");
56 gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads));
57 gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads));
58 return;
61 if (fw_config_probe(FW_CONFIG(AUDIO, MAX98390_ALC5682I_I2S_4SPK))) {
62 printk(BIOS_INFO, "Configure audio over I2S with MAX98390 ALC5682I.\n");
63 gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
64 gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads));
65 printk(BIOS_INFO, "BT offload enabled\n");
66 gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads));
69 BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);