src/mainboard/google/octopus/variants/meep/overridetree.cb

   1 chip soc/intel/apollolake
   2
   3         # EMMC Tx CMD Delay
   4         # Refer to EDS-Vol2-16.32.
   5         # [14:8] steps of delay for DDR mode, each 125ps.
   6         # [6:0] steps of delay for SDR mode, each 125ps.
   7         register "emmc_tx_cmd_cntl" = "0x505"
   8
   9         # EMMC TX DATA Delay 1
  10         # Refer to EDS-Vol2-16.33.
  11         # [14:8] steps of delay for HS400, each 125ps.
  12         # [6:0] steps of delay for SDR104/HS200, each 125ps.
  13         register "emmc_tx_data_cntl1" = "0x0b0d"
  14
  15         # EMMC TX DATA Delay 2
  16         # Refer to EDS-Vol2-16.34.
  17         # [30:24] steps of delay for SDR50, each 125ps.
  18         # [22:16] steps of delay for DDR50, each 125ps.
  19         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  20         # [6:0] steps of delay for SDR12, each 125ps.
  21         register "emmc_tx_data_cntl2" = "0x1c2a2a2a"
  22
  23         # EMMC RX CMD/DATA Delay 1
  24         # Refer to EDS-Vol2-16.35.
  25         # [30:24] steps of delay for SDR50, each 125ps.
  26         # [22:16] steps of delay for DDR50, each 125ps.
  27         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  28         # [6:0] steps of delay for SDR12, each 125ps.
  29         register "emmc_rx_cmd_data_cntl1" = "0x00171a1a"
  30
  31         # EMMC RX CMD/DATA Delay 2
  32         # Refer to EDS-Vol2-16.37.
  33         # [17:16] stands for Rx Clock before Output Buffer
  34         # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
  35         # [6:0] steps of delay for HS200, each 125ps.
  36         register "emmc_rx_cmd_data_cntl2" = "0x10028"
  37
  38         # EMMC Rx Strobe Delay
  39         # Refer to EDS-Vol2-16.36.
  40         # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps.
  41         # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
  42         register "emmc_rx_strobe_cntl" = "0x0b0b"
  43
  44         # Intel Common SoC Config
  45         #+-------------------+---------------------------+
  46         #| Field             |  Value                    |
  47         #+-------------------+---------------------------+
  48         #| GSPI0             | cr50 TPM. Early init is   |
  49         #|                   | required to set up a BAR  |
  50         #|                   | for TPM communication     |
  51         #|                   | before memory is up       |
  52         #| I2C0              | Digitizer                 |
  53         #| I2C5              | Audio                     |
  54         #| I2C6              | Trackpad                  |
  55         #| I2C7              | Touchscreen               |
  56         #+-------------------+---------------------------+
  57         register "common_soc_config" = "{
  58                 .gspi[0] = {
  59                         .speed_mhz = 1,
  60                         .early_init = 1,
  61                 },
  62                 .i2c[0] = {
  63                         .speed = I2C_SPEED_FAST,
  64                         .rise_time_ns = 120,
  65                         .fall_time_ns = 30,
  66                 },
  67                 .i2c[5] = {
  68                         .speed = I2C_SPEED_FAST,
  69                         .rise_time_ns = 104,
  70                         .fall_time_ns = 52,
  71                 },
  72                 .i2c[6] = {
  73                         .speed = I2C_SPEED_FAST,
  74                         .rise_time_ns = 66,
  75                         .fall_time_ns = 90,
  76                         .data_hold_time_ns = 350,
  77                 },
  78                 .i2c[7] = {
  79                         .speed = I2C_SPEED_FAST,
  80                         .rise_time_ns = 44,
  81                         .fall_time_ns = 90,
  82                 },
  83         }"
  84
  85         device domain 0 on
  86                 device pci 15.0 on
  87                         chip drivers/usb/acpi
  88                                 register "desc" = ""Root Hub""
  89                                 register "type" = "UPC_TYPE_HUB"
  90                                 device usb 0.0 on
  91                                         chip drivers/usb/acpi
  92                                                 register "desc" = ""Right Type-C Port""
  93                                                 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
  94                                                 register "group" = "ACPI_PLD_GROUP(2, 1)"
  95                                                 device usb 2.0 on end
  96                                         end
  97                                         chip drivers/usb/acpi
  98                                                 register "desc" = ""Right Type-A Port""
  99                                                 register "type" = "UPC_TYPE_A"
 100                                                 register "group" = "ACPI_PLD_GROUP(2, 2)"
 101                                                 device usb 2.1 on end
 102                                         end
 103                                         chip drivers/usb/acpi
 104                                                 register "desc" = ""Left Type-A Port""
 105                                                 register "type" = "UPC_TYPE_A"
 106                                                 register "group" = "ACPI_PLD_GROUP(1, 2)"
 107                                                 device usb 2.3 on end
 108                                         end
 109                                         chip drivers/usb/acpi
 110                                                 register "desc" = ""Left Type-C Port""
 111                                                 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 112                                                 register "group" = "ACPI_PLD_GROUP(1, 1)"
 113                                                 device usb 2.4 on end
 114                                         end
 115                                         chip drivers/usb/acpi
 116                                                 register "desc" = ""Right Type-C Port""
 117                                                 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 118                                                 register "group" = "ACPI_PLD_GROUP(2, 1)"
 119                                                 device usb 3.0 on end
 120                                         end
 121                                         chip drivers/usb/acpi
 122                                                 register "desc" = ""Right Type-A Port""
 123                                                 register "type" = "UPC_TYPE_USB3_A"
 124                                                 register "group" = "ACPI_PLD_GROUP(2, 2)"
 125                                                 device usb 3.1 on end
 126                                         end
 127                                         chip drivers/usb/acpi
 128                                                 register "desc" = ""Left Type-A Port""
 129                                                 register "type" = "UPC_TYPE_USB3_A"
 130                                                 register "group" = "ACPI_PLD_GROUP(1, 2)"
 131                                                 device usb 3.3 on end
 132                                         end
 133                                         chip drivers/usb/acpi
 134                                                 register "desc" = ""Left Type-C Port""
 135                                                 register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 136                                                 register "group" = "ACPI_PLD_GROUP(1, 1)"
 137                                                 device usb 3.4 on end
 138                                         end
 139                                 end
 140                         end
 141                 end     # - XHCI
 142                 device pci 16.0 on
 143                         chip drivers/i2c/hid
 144                                 register "generic.hid" = ""WCOM50C1""
 145                                 register "generic.desc" = ""WCOM Digitizer""
 146                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_139_IRQ)"
 147                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
 148                                 register "generic.reset_delay_ms" = "20"
 149                                 register "generic.has_power_resource" = "1"
 150                                 register "generic.detect" = "1"
 151                                 register "hid_desc_reg_offset" = "0x1"
 152                                 device i2c 0x9 on end
 153                         end
 154                         chip drivers/i2c/hid
 155                                 register "generic.hid" = ""EMRTE635""
 156                                 register "generic.desc" = ""EMRIGHT Digitizer""
 157                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_139_IRQ)"
 158                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
 159                                 register "generic.reset_delay_ms" = "20"
 160                                 register "generic.has_power_resource" = "1"
 161                                 register "generic.detect" = "1"
 162                                 register "hid_desc_reg_offset" = "0x1"
 163                                 device i2c 0xa on end
 164                         end
 165                 end     # - I2C 0
 166                 device pci 17.1 on
 167                         chip drivers/i2c/da7219
 168                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 169                                 register "btn_cfg" = "50"
 170                                 register "mic_det_thr" = "200"
 171                                 register "jack_ins_deb" = "20"
 172                                 register "jack_det_rate" = ""32ms_64ms""
 173                                 register "jack_rem_deb" = "1"
 174                                 register "a_d_btn_thr" = "0xa"
 175                                 register "d_b_btn_thr" = "0x16"
 176                                 register "b_c_btn_thr" = "0x21"
 177                                 register "c_mic_btn_thr" = "0x3e"
 178                                 register "btn_avg" = "4"
 179                                 register "adc_1bit_rpt" = "1"
 180                                 register "micbias_lvl" = "2600"
 181                                 register "mic_amp_in_sel" = ""diff""
 182                                 device i2c 1a on end
 183                         end
 184                         chip drivers/i2c/generic
 185                                 register "hid" = ""10EC5682""
 186                                 register "name" = ""RT58""
 187                                 register "desc" = ""Realtek RT5682""
 188                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 189                                 register "probed" = "1"
 190                                 register "property_count" = "1"
 191                                 # Set the jd_src to RT5668_JD1 for jack detection
 192                                 register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
 193                                 register "property_list[0].name" = ""realtek,jd-src""
 194                                 register "property_list[0].integer" = "1"
 195                                 device i2c 1a on end
 196                         end
 197                 end     # - I2C 5
 198                 device pci 17.2 on
 199                         chip drivers/i2c/generic
 200                                 register "hid" = ""ELAN0000""
 201                                 register "desc" = ""ELAN Touchpad""
 202                                 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPIO_135_IRQ)"
 203                                 register "wake" = "GPE0_DW3_27"
 204                                 register "detect" = "1"
 205                                 device i2c 15 on end
 206                         end
 207                 end     # - I2C 6
 208                 device pci 17.3 on
 209                         chip drivers/i2c/generic
 210                                 register "hid" = ""ELAN0001""
 211                                 register "desc" = ""ELAN Touchscreen""
 212                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 213                                 register "detect" = "1"
 214                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 215                                 register "reset_delay_ms" = "20"
 216                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 217                                 register "enable_delay_ms" = "1"
 218                                 register "has_power_resource" = "1"
 219                                 device i2c 10 on end
 220                         end
 221                         chip drivers/i2c/hid
 222                                 register "generic.hid" = ""WDHT0002""
 223                                 register "generic.desc" = ""WDT Touchscreen""
 224                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 225                                 register "generic.detect" = "1"
 226                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 227                                 register "generic.reset_delay_ms" = "130"
 228                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 229                                 register "generic.enable_delay_ms" = "1"
 230                                 register "generic.has_power_resource" = "1"
 231                                 register "hid_desc_reg_offset" = "0x20"
 232                                 device i2c 2c on end
 233                         end
 234                         chip drivers/i2c/hid
 235                                 register "generic.hid" = ""GTCH7503""
 236                                 register "generic.desc" = ""G2TOUCH Touchscreen""
 237                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 238                                 register "generic.detect" = "1"
 239                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 240                                 register "generic.reset_delay_ms" = "50"
 241                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 242                                 register "generic.enable_delay_ms" = "1"
 243                                 register "generic.has_power_resource" = "1"
 244                                 register "hid_desc_reg_offset" = "0x01"
 245                                 device i2c 40 on end
 246                         end
 247                 end     # - I2C 7
 248         end
 249
 250         # Disable compliance mode
 251         register "disable_compliance_mode" = "1"
 252 end