util/bincfg/gbe-ich9m.set

   1 # SPDX-License-Identifier: GPL-3.0-or-later
   2
   3 # GbE values for ICH9M
   4 {
   5         # Hardcoded chipset values
   6         "reserved04" = 0xffff,
   7         "version05" = 0x1083,
   8         "reserved06" = 0xffff,
   9         "reserved07" = 0xffff,
  10         "pbalow" = 0xffff,
  11         "pbahigh" = 0xffff,
  12         "pci_loadvid" = 1,
  13         "pci_loadssid" = 1,
  14         "pci_pmen" = 1,
  15         "pci_auxpwr" = 1,
  16         "pci_reserved4" = 1,
  17         "sh_phy_enpwrdown" = 1,
  18         "sh_reserved1" = 0x5,
  19         "sh_reserved3" = 1,
  20         "sh_sign" = 0x2,
  21         "cw1_extcfgptr" = 0x020,
  22         "cw1_oemload" = 1,
  23         "cw1_reserved1" = 1,
  24         "cw2_extphylen" = 0x05,
  25         "l1_reserved2" = 1,
  26         "l1_reserved4" = 1,
  27         "l1_lplu_non_d0a" = 1,
  28         "l1_gbedis_non_d0a" = 1,
  29         "reserved19" = 0x2b40,
  30         "reserved1a" = 0x0043,
  31         "reserved1c" = 0x10f5,
  32         "reserved1d" = 0xbaad,
  33         "_82567lm" = 0x10f5,
  34         "_82567lf" = 0x10bf,
  35         "reserved20" = 0xbaad,
  36         "_82567v" = 0x10cb,
  37         "reserved22_0" = 0xbaad,
  38         "reserved22_1" = 0xbaad,
  39
  40         # Hardcoded PXE setup (disabled)
  41         "pxe30_defbootsel" = 0x3,
  42         "pxe30_ctrlsprompt" = 0x3,
  43         "pxe30_pxeabsent" = 1,
  44         "pxe31_disablemenu" = 1,
  45         "pxe31_disabletitle" = 1,
  46         "pxe31_signature" = 1,
  47         "pxe32_buildnum" = 0x18,
  48         "pxe32_minorversion" = 0x3,
  49         "pxe32_majorversion" = 0x1,
  50         "pxe33_basecodeabsent" = 1,
  51         "pxe33_undipresent" = 1,
  52         "pxe33_reserved1" = 1,
  53         "pxe33_signature" = 1,
  54         "pxe_padding"[11] = 0xffff,
  55
  56         # GbE power settings
  57         "lanpwr_d3pwr" = 1,
  58         "lanpwr_d0pwr" = 13,
  59
  60         # GbE LED modes
  61         "l1_led1mode" = 0xb,
  62         "l1_led1blinks" = 1,
  63         "l02_led0mode" = 0x2,
  64         "l02_led2mode" = 0x1,
  65
  66         # Padding 0xf80 bytes
  67         "padding"[0xf80] = 0xff,
  68
  69         # TODO: make command line switch for these
  70
  71         # Configurable PCI IDs
  72         "ssdid" = 0x20ee,
  73         "ssvid" = 0x17aa,
  74         "did" = 0x10f5,
  75         "vid" = 0x8086,
  76
  77         # This example sets MAC address to 00:11:22:33:44:55
  78         "macaddress0" = 0x00,
  79         "macaddress1" = 0x11,
  80         "macaddress2" = 0x22,
  81         "macaddress3" = 0x33,
  82         "macaddress4" = 0x44,
  83         "macaddress5" = 0x55
  84 }