src/mainboard/google/dedede/variants/sasuke/overridetree.cb

   1 chip soc/intel/jasperlake
   2         # Disable PCIe Clock Source 4 (index 3)
   3         register "PcieClkSrcUsage[3]" = "0xff"
   4
   5         # USB Port Configuration
   6         register "usb2_ports[0]" = "{
   7                 .enable = 1,
   8                 .ocpin = OC_SKIP,
   9                 .tx_bias = USB2_BIAS_0MV,
  10                 .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
  11                 .pre_emp_bias  = USB2_BIAS_28P15MV,
  12                 .pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
  13         }" # Type-C Port C0
  14         register "usb2_ports[1]" = "{
  15                 .enable = 1,
  16                 .ocpin = OC_SKIP,
  17                 .tx_bias = USB2_BIAS_16P9MV,
  18                 .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
  19                 .pre_emp_bias  = USB2_BIAS_39P35MV,
  20                 .pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
  21         }" # Type-C Port C1
  22         register "usb2_ports[2]" = "{
  23                 .enable = 1,
  24                 .ocpin = OC_SKIP,
  25                 .tx_bias = USB2_BIAS_16P9MV,
  26                 .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
  27                 .pre_emp_bias  = USB2_BIAS_39P35MV,
  28                 .pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
  29         }" # Type-A Port A0
  30         register "usb2_ports[3]" = "{
  31                 .enable = 1,
  32                 .ocpin = OC_SKIP,
  33                 .tx_bias = USB2_BIAS_0MV,
  34                 .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON,
  35                 .pre_emp_bias  = USB2_BIAS_11P25MV,
  36                 .pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
  37         }" # Type-A Port A1
  38         register "usb2_ports[4]" = "USB2_PORT_EMPTY"
  39         register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"     # Camera
  40
  41         # Intel Common SoC Config
  42         #+-------------------+---------------------------+
  43         #| Field             |  Value                    |
  44         #+-------------------+---------------------------+
  45         #| GSPI0             | cr50 TPM. Early init is   |
  46         #|                   | required to set up a BAR  |
  47         #|                   | for TPM communication     |
  48         #|                   | before memory is up       |
  49         #| I2C0              | Trackpad                  |
  50         #| I2C1              | Digitizer                 |
  51         #| I2C2              | Touchscreen               |
  52         #| I2C3              | Camera                    |
  53         #| I2C4              | Audio                     |
  54         #+-------------------+---------------------------+
  55         register "common_soc_config" = "{
  56                 .gspi[0] = {
  57                         .speed_mhz = 1,
  58                         .early_init = 1,
  59                 },
  60                 .i2c[0] = {
  61                         .speed = I2C_SPEED_FAST,
  62                         .rise_time_ns = 209,
  63                         .fall_time_ns = 12,
  64                 },
  65                 .i2c[1] = {
  66                         .speed = I2C_SPEED_FAST,
  67                 },
  68                 .i2c[2] = {
  69                         .speed = I2C_SPEED_FAST,
  70                 },
  71                 .i2c[3] = {
  72                         .speed = I2C_SPEED_FAST,
  73                 },
  74                 .i2c[4] = {
  75                         .speed = I2C_SPEED_FAST,
  76                         .rise_time_ns = 175,
  77                         .fall_time_ns = 8,
  78                 },
  79         }"
  80         device domain 0 on
  81                 device pci 04.0 on
  82                         chip drivers/intel/dptf
  83                                 register "options.tsr[0].desc" = ""Charger""
  84                                 register "options.tsr[1].desc" = ""Vcore""
  85                                 register "policies.passive" = "{
  86                                         [0] = DPTF_PASSIVE(CPU, CPU,           90, 10000),
  87                                         [1] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_0, 60, 60000),
  88                                         [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 60, 15000),
  89                                 }"
  90                                 register "policies.critical" = "{
  91                                         [0] = DPTF_CRITICAL(CPU,           105, SHUTDOWN),
  92                                         [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN),
  93                                         [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 90, SHUTDOWN),
  94                                 }"
  95                                 register "controls.power_limits" = "{
  96                                         .pl1 = {
  97                                                 .min_power = 6000,
  98                                                 .max_power = 6000,
  99                                                 .time_window_min = 1 * MSECS_PER_SEC,
 100                                                 .time_window_max = 1 * MSECS_PER_SEC,
 101                                                 .granularity = 200,
 102                                         },
 103                                         .pl2 = {
 104                                                 .min_power = 20000,
 105                                                 .max_power = 20000,
 106                                                 .time_window_min = 1 * MSECS_PER_SEC,
 107                                                 .time_window_max = 1 * MSECS_PER_SEC,
 108                                                 .granularity = 1000,
 109                                         }
 110                                 }"
 111                                 register "controls.charger_perf" = "{
 112                                         [0] = { 255, 3000 },
 113                                         [1] = {  39, 2500 },
 114                                         [2] = {  31, 2000 },
 115                                         [3] = {  23, 1500 }
 116                                 }"
 117                                 device generic 0 on end
 118                         end
 119                 end # SA Thermal device
 120                 device pci 14.0 on
 121                         chip drivers/usb/acpi
 122                                 device usb 0.0 on
 123                                         chip drivers/usb/acpi
 124                                                 register "desc" = ""UFCamera""
 125                                                 register "type" = "UPC_TYPE_INTERNAL"
 126                                                 register "has_power_resource" = "1"
 127                                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D13)"
 128                                                 register "enable_delay_ms" = "20"
 129                                                 device usb 2.5 on end
 130                                         end
 131                                         chip drivers/usb/acpi
 132                                                 register "desc" = ""LTE""
 133                                                 register "type" = "UPC_TYPE_INTERNAL"
 134                                                 register "has_power_resource" = "1"
 135                                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)"
 136                                                 register "reset_off_delay_ms" = "20"
 137                                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)"
 138                                                 register "enable_delay_ms" = "20"
 139                                                 device usb 3.3 on end
 140                                         end
 141                                 end
 142                         end
 143                 end # USB xHCI
 144                 device pci 15.0 on
 145                         chip drivers/i2c/generic
 146                                 register "hid" = ""ELAN0000""
 147                                 register "desc" = ""ELAN Touchpad""
 148                                 register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
 149                                 register "wake" = "GPE0_DW0_03"
 150                                 register "detect" = "1"
 151                                 device i2c 15 on end
 152                         end
 153                         chip drivers/i2c/hid
 154                                 register "generic.hid" = ""ZNT0000""
 155                                 register "generic.desc" = ""Zinitix Touchpad""
 156                                 register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
 157                                 register "generic.wake" = "GPE0_DW0_03"
 158                                 register "generic.detect" = "1"
 159                                 register "hid_desc_reg_offset" = "0xE"
 160                                 device i2c 40 on end
 161                         end
 162                 end # I2C 0
 163                 device pci 15.2 on end
 164                 device pci 1c.7 off end # PCI Express Root Port 8
 165                 device pci 19.0 on
 166                         chip drivers/i2c/da7219
 167                                 register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
 168                                 register "btn_cfg" = "50"
 169                                 register "mic_det_thr" = "200"
 170                                 register "jack_ins_deb" = "20"
 171                                 register "jack_det_rate" = ""32ms_64ms""
 172                                 register "jack_rem_deb" = "1"
 173                                 register "a_d_btn_thr" = "0xa"
 174                                 register "d_b_btn_thr" = "0x16"
 175                                 register "b_c_btn_thr" = "0x21"
 176                                 register "c_mic_btn_thr" = "0x3e"
 177                                 register "btn_avg" = "4"
 178                                 register "adc_1bit_rpt" = "1"
 179                                 register "micbias_lvl" = "2600"
 180                                 register "mic_amp_in_sel" = ""diff""
 181                                 device i2c 1a on end
 182                         end
 183                 end #I2C 4
 184                 device pci 1f.3 on
 185                         chip drivers/generic/max98357a
 186                                 register "hid" = ""MX98360A""
 187                                 register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
 188                                 device generic 0 on end
 189                         end
 190                 end # Intel HDA
 191         end
 192 end