src/mainboard/google/octopus/variants/phaser/overridetree.cb

   1 chip soc/intel/apollolake
   2
   3         # EMMC Tx CMD Delay
   4         # Refer to EDS-Vol2-16.32.
   5         # [14:8] steps of delay for DDR mode, each 125ps.
   6         # [6:0] steps of delay for SDR mode, each 125ps.
   7         register "emmc_tx_cmd_cntl" = "0x505"
   8
   9         # EMMC TX DATA Delay 1
  10         # Refer to EDS-Vol2-16.33.
  11         # [14:8] steps of delay for HS400, each 125ps.
  12         # [6:0] steps of delay for SDR104/HS200, each 125ps.
  13         register "emmc_tx_data_cntl1" = "0x0b0c"
  14
  15         # EMMC TX DATA Delay 2
  16         # Refer to EDS-Vol2-16.34.
  17         # [30:24] steps of delay for SDR50, each 125ps.
  18         # [22:16] steps of delay for DDR50, each 125ps.
  19         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  20         # [6:0] steps of delay for SDR12, each 125ps.
  21         register "emmc_tx_data_cntl2" = "0x1c282929"
  22
  23         # EMMC RX CMD/DATA Delay 1
  24         # Refer to EDS-Vol2-16.35.
  25         # [30:24] steps of delay for SDR50, each 125ps.
  26         # [22:16] steps of delay for DDR50, each 125ps.
  27         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  28         # [6:0] steps of delay for SDR12, each 125ps.
  29         register "emmc_rx_cmd_data_cntl1" = "0x00181b1b"
  30
  31         # EMMC RX CMD/DATA Delay 2
  32         # Refer to EDS-Vol2-16.37.
  33         # [17:16] stands for Rx Clock before Output Buffer
  34         # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
  35         # [6:0] steps of delay for HS200, each 125ps.
  36         register "emmc_rx_cmd_data_cntl2" = "0x10028"
  37
  38         # EMMC Rx Strobe Delay
  39         # Refer to EDS-Vol2-16.36.
  40         # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps.
  41         # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
  42         register "emmc_rx_strobe_cntl" = "0x0b0b"
  43
  44         # Intel Common SoC Config
  45         #+-------------------+---------------------------+
  46         #| Field             |  Value                    |
  47         #+-------------------+---------------------------+
  48         #| GSPI0             | cr50 TPM. Early init is   |
  49         #|                   | required to set up a BAR  |
  50         #|                   | for TPM communication     |
  51         #|                   | before memory is up       |
  52         #| I2C0              | Digitizer                 |
  53         #| I2C5              | Audio                     |
  54         #| I2C6              | Trackpad                  |
  55         #| I2C7              | Touchscreen               |
  56         #+-------------------+---------------------------+
  57         register "common_soc_config" = "{
  58                 .gspi[0] = {
  59                         .speed_mhz = 1,
  60                         .early_init = 1,
  61                 },
  62                 .i2c[0] = {
  63                         .speed = I2C_SPEED_FAST,
  64                         .rise_time_ns = 66,
  65                         .fall_time_ns = 90,
  66                 },
  67                 .i2c[5] = {
  68                         .speed = I2C_SPEED_FAST,
  69                         .rise_time_ns = 104,
  70                         .fall_time_ns = 52,
  71                 },
  72                 .i2c[6] = {
  73                         .speed = I2C_SPEED_FAST,
  74                         .rise_time_ns = 66,
  75                         .fall_time_ns = 90,
  76                         .data_hold_time_ns = 350,
  77                 },
  78                 .i2c[7] = {
  79                         .speed = I2C_SPEED_FAST,
  80                         .rise_time_ns = 76,
  81                         .fall_time_ns = 164,
  82                 },
  83         }"
  84
  85         device domain 0 on
  86                 device pci 16.0 on
  87                         chip drivers/i2c/hid
  88                                 register "generic.hid" = ""WCOM50C1""
  89                                 register "generic.desc" = ""WCOM Digitizer""
  90                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_139_IRQ)"
  91                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
  92                                 register "generic.reset_delay_ms" = "20"
  93                                 register "generic.has_power_resource" = "1"
  94                                 register "generic.detect" = "1"
  95                                 register "hid_desc_reg_offset" = "0x1"
  96                                 device i2c 0x9 on end
  97                         end
  98                 end     # - I2C 0
  99                 device pci 17.1 on
 100                         chip drivers/i2c/da7219
 101                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 102                                 register "btn_cfg" = "50"
 103                                 register "mic_det_thr" = "200"
 104                                 register "jack_ins_deb" = "20"
 105                                 register "jack_det_rate" = ""32ms_64ms""
 106                                 register "jack_rem_deb" = "1"
 107                                 register "a_d_btn_thr" = "0xa"
 108                                 register "d_b_btn_thr" = "0x16"
 109                                 register "b_c_btn_thr" = "0x21"
 110                                 register "c_mic_btn_thr" = "0x3e"
 111                                 register "btn_avg" = "4"
 112                                 register "adc_1bit_rpt" = "1"
 113                                 register "micbias_lvl" = "2600"
 114                                 register "mic_amp_in_sel" = ""diff""
 115                                 device i2c 1a on end
 116                         end
 117                         chip drivers/i2c/generic
 118                                 register "hid" = ""10EC5682""
 119                                 register "name" = ""RT58""
 120                                 register "desc" = ""Realtek RT5682""
 121                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 122                                 register "probed" = "1"
 123                                 register "property_count" = "1"
 124                                 # Set the jd_src to RT5668_JD1 for jack detection
 125                                 register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
 126                                 register "property_list[0].name" = ""realtek,jd-src""
 127                                 register "property_list[0].integer" = "1"
 128                                 device i2c 1a on end
 129                         end
 130                 end     # - I2C 5
 131                 device pci 17.2 on
 132                         chip drivers/i2c/generic
 133                                 register "hid" = ""ELAN0000""
 134                                 register "desc" = ""ELAN Touchpad""
 135                                 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPIO_135_IRQ)"
 136                                 register "wake" = "GPE0_DW3_27"
 137                                 register "detect" = "1"
 138                                 device i2c 15 on end
 139                         end
 140                         chip drivers/i2c/hid
 141                                 register "generic.hid" = ""SYNA0000""
 142                                 register "generic.cid" = ""ACPI0C50""
 143                                 register "generic.desc" = ""Synaptics Touchpad""
 144                                 register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPIO_135_IRQ)"
 145                                 register "generic.wake" = "GPE0_DW3_27"
 146                                 register "generic.detect" = "1"
 147                                 register "hid_desc_reg_offset" = "0x20"
 148                                 device i2c 0x2c on end
 149                         end
 150                 end     # - I2C 6
 151                 device pci 17.3 on
 152                         chip drivers/i2c/generic
 153                                 register "hid" = ""ELAN0001""
 154                                 register "desc" = ""ELAN Touchscreen""
 155                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 156                                 register "detect" = "1"
 157                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 158                                 register "reset_delay_ms" = "20"
 159                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 160                                 register "enable_delay_ms" = "1"
 161                                 register "has_power_resource" = "1"
 162                                 device i2c 10 on end
 163                         end
 164                         chip drivers/i2c/hid
 165                                 register "generic.hid" = ""SYTS7817""
 166                                 register "generic.desc" = ""Synaptics Touchscreen""
 167                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 168                                 register "generic.detect" = "1"
 169                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 170                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 171                                 register "generic.reset_delay_ms" = "45"
 172                                 register "generic.has_power_resource" = "1"
 173                                 register "hid_desc_reg_offset" = "0x20"
 174                                 device i2c 20 on end
 175                         end
 176                         chip drivers/i2c/generic
 177                                 register "hid" = ""RAYD0001""
 178                                 register "desc" = ""Raydium Touchscreen""
 179                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 180                                 register "detect" = "1"
 181                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 182                                 register "reset_delay_ms" = "1"
 183                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 184                                 register "enable_delay_ms" = "50"
 185                                 register "has_power_resource" = "1"
 186                                 device i2c 39 on end
 187                         end
 188                         chip drivers/i2c/hid
 189                                 register "generic.hid" = ""GTCH7502""
 190                                 register "generic.desc" = ""G2TOUCH Touchscreen""
 191                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 192                                 register "generic.detect" = "1"
 193                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 194                                 register "generic.enable_delay_ms" = "1"
 195                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 196                                 register "generic.reset_delay_ms" = "70"
 197                                 register "generic.has_power_resource" = "1"
 198                                 register "hid_desc_reg_offset" = "0x01"
 199                                 device i2c 40 on end
 200                         end
 201                 end     # - I2C 7
 202         end
 203
 204         # Disable xHCI compliance mode
 205         register "disable_compliance_mode" = "1"
 206 end