src/mainboard/samsung/stumpy/devicetree.cb

   1 chip northbridge/intel/sandybridge
   2
   3         # Enable DisplayPort 1 Hotplug with 6ms pulse
   4         register "gpu_dp_d_hotplug" = "0x06"
   5
   6         # Enable DisplayPort 0 Hotplug with 6ms pulse
   7         register "gpu_dp_c_hotplug" = "0x06"
   8
   9         # Enable DVI Hotplug with 6ms pulse
  10         register "gpu_dp_b_hotplug" = "0x06"
  11
  12         register "spd_addresses" = "{0x50, 0, 0x52, 0}"
  13         register "max_mem_clock_mhz" = "666"
  14
  15         chip cpu/intel/model_206ax
  16                 device cpu_cluster 0 on end
  17
  18                 register "acpi_c1" = "CPU_ACPI_C3"
  19                 register "acpi_c2" = "CPU_ACPI_C6"
  20         end
  21
  22         device domain 0 on
  23                 subsystemid 0x1ae0 0xc000 inherit
  24                 device ref host_bridge on end # host bridge
  25                 device ref igd on end # vga controller
  26
  27                 chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
  28                         # GPI routing
  29                         #  0 No effect (default)
  30                         #  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
  31                         #  2 SCI (if corresponding GPIO_EN bit is also set)
  32                         register "gpi1_routing" = "0"
  33                         register "gpi14_routing" = "2"
  34
  35                         register "sata_port_map" = "0x3"
  36
  37                         register "gen1_dec" = "0x00fc1601"
  38                         # SuperIO range is 0x700-0x73f
  39                         register "gen2_dec" = "0x003c0701"
  40
  41                         register "usb_port_config" = "{
  42                                 { 1, 1, 0 }, /* P0: Front port  (OC0) */
  43                                 { 1, 0, 1 }, /* P1: Back port   (OC1) */
  44                                 { 1, 0, -1 }, /* P2: MINIPCIE1   (no OC) */
  45                                 { 1, 0, -1 }, /* P3: MMC         (no OC) */
  46                                 { 1, 1, 2 }, /* P4: Front port  (OC2) */
  47                                 { 0, 0, -1 }, /* P5: Empty */
  48                                 { 0, 0, -1 }, /* P6: Empty */
  49                                 { 0, 0, -1 }, /* P7: Empty */
  50                                 { 1, 0, 4 }, /* P8: Back port   (OC4) */
  51                                 { 1, 0, -1 }, /* P9: MINIPCIE3   (no OC) */
  52                                 { 1, 0, -1 }, /* P10: BLUETOOTH  (no OC) */
  53                                 { 0, 0, -1 }, /* P11: Empty */
  54                                 { 1, 0, 6 }, /* P12: Back port  (OC6) */
  55                                 { 1, 0, 5 }, /* P13: Back port  (OC5) */
  56                         }"
  57
  58                         device ref mei1 on end # Management Engine Interface 1
  59                         device ref mei2 off end # Management Engine Interface 2
  60                         device ref me_ide_r off end # Management Engine IDE-R
  61                         device ref me_kt off end # Management Engine KT
  62                         device ref gbe off end # Intel Gigabit Ethernet
  63                         device ref ehci2 on end # USB2 EHCI #2
  64                         device ref hda on end # High Definition Audio
  65                         device ref pcie_rp1 on end # PCIe Port #1 (WLAN)
  66                         device ref pcie_rp2 off end # PCIe Port #2
  67                         device ref pcie_rp3 on end # PCIe Port #3 (Debug)
  68                         device ref pcie_rp4 on end # PCIe Port #4 (LAN)
  69                         device ref pcie_rp5 off end # PCIe Port #5
  70                         device ref pcie_rp6 off end # PCIe Port #6
  71                         device ref pcie_rp7 off end # PCIe Port #7
  72                         device ref pcie_rp8 off end # PCIe Port #8
  73                         device ref ehci1 on end # USB2 EHCI #1
  74                         device ref pci_bridge off end # PCI bridge
  75                         device ref lpc on # LPC bridge
  76                                 chip superio/ite/it8772f
  77                                         # Enable GPIO10 as USBPWRON12#
  78                                         # Enable GPIO12 as USBPWRON13#
  79                                         register "gpio_set1" = "0x05"
  80                                         # Enable GPIO22 as SIO_WAEKSCI#
  81                                         register "gpio_set2" = "0x04"
  82                                         # Enable GPIO32 as SIO_EXTSMI#
  83                                         register "gpio_set3" = "0x04"
  84                                         # Enable GPIO45 as LED_POWER#
  85                                         register "gpio_set4" = "0x20"
  86                                         # Enable GPIO51 as USBPWRON8#
  87                                         # Enable GPIO52 as USBPWRON1#
  88                                         register "gpio_set5" = "0x06"
  89                                         # Skip keyboard init
  90                                         register "skip_keyboard" = "true"
  91                                         # Enable PECI on TMPIN3
  92                                         register "TMPIN3.mode" = "THERMAL_PECI"
  93                                         # Enable FAN3
  94                                         register "FAN3.mode" = "FAN_SMART_SOFTWARE"
  95                                         register "FAN3.smart.pwm_start" = "30"
  96
  97                                         device pnp 2e.0 off end # FDC
  98                                         device pnp 2e.1 on # Serial Port 1
  99                                                 io 0x60 = 0x2f8
 100                                                 irq 0x70 = 4
 101                                         end
 102                                         device pnp 2e.4 on # Environment Controller
 103                                                 io 0x60 = 0x700
 104                                                 io 0x62 = 0x710
 105                                         end
 106                                         device pnp 2e.7 on # GPIO
 107                                                 io 0x60 = 0x720
 108                                                 io 0x62 = 0x730
 109                                         end
 110                                         device pnp 2e.5 on
 111                                                 io 0x60 = 0x60
 112                                                 io 0x62 = 0x64
 113                                                 irq 0x70 = 1
 114                                         end # Keyboard
 115                                         device pnp 2e.6 on
 116                                                 irq 0x70 = 12
 117                                         end # Mouse
 118                                         device pnp 2e.a off end # IR
 119                                 end
 120                                 chip drivers/pc80/tpm
 121                                         device pnp 0c31.0 on end
 122                                 end
 123                         end
 124                         device ref sata1 on end # SATA Controller 1
 125                         device ref smbus on end # SMBus
 126                         device ref sata2 off end # SATA Controller 2
 127                         device ref thermal on end # Thermal
 128                 end
 129         end
 130 end