mainboard/intel/avenuecity_crb: Update full IIO configuration
[coreboot2.git] / src / mainboard / sifive / hifive-unleashed / hifive-unleashed-a00.dts
blobf453af93dba0ee89b1e0e648630e17c2b3819487
1 /* SPDX-License-Identifier: GPL-2.0-only */
3 /include/ "fu540-c000.dtsi"
5 / {
6         #address-cells = <2>;
7         #size-cells = <2>;
8         model = "SiFive HiFive Unleashed A00";
9         compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000";
11         chosen {
12         };
14         cpus {
15                 /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
16                 timebase-frequency = <1000000>;
17         };
19         memory@80000000 {
20                 device_type = "memory";
21                 reg = <0x0 0x80000000 0x2 0x00000000>;
22         };
24         soc {
25         };
27         hfclk: hfclk {
28                 #clock-cells = <0>;
29                 compatible = "fixed-clock";
30                 clock-frequency = <33333333>;
31                 clock-output-names = "hfclk";
32         };
34         rtcclk: rtcclk {
35                 #clock-cells = <0>;
36                 compatible = "fixed-clock";
37                 clock-frequency = <1000000>;
38                 clock-output-names = "rtcclk";
39         };
42 &uart0 {
43         status = "okay";
46 &uart1 {
47         status = "okay";
50 &i2c0 {
51         status = "okay";
54 &qspi0 {
55         status = "okay";
56         flash@0 {
57                 compatible = "issi,is25wp256", "jedec,spi-nor";
58                 reg = <0>;
59                 spi-max-frequency = <50000000>;
60                 m25p,fast-read;
61                 spi-tx-bus-width = <4>;
62                 spi-rx-bus-width = <4>;
63         };
66 &qspi2 {
67         status = "okay";
68         mmc@0 {
69                 compatible = "mmc-spi-slot";
70                 reg = <0>;
71                 spi-max-frequency = <20000000>;
72                 voltage-ranges = <3300 3300>;
73                 disable-wp;
74         };
77 &eth0 {
78         status = "okay";
79         phy-mode = "gmii";
80         phy-handle = <&phy0>;
81         phy0: ethernet-phy@0 {
82                 reg = <0>;
83         };