3 * Copyright (C) 2010 coresystems GmbH
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 #include <libpayload-config.h>
40 // IDs without a quirk don't need to be mentioned in this list
41 // but some are here for easier testing.
43 usb_quirks_t usb_quirks
[] = {
44 /* Working chips,... remove before next release */
45 { 0x3538, 0x0054, USB_QUIRK_NONE
, 0 }, // PQI 1GB
46 { 0x13fd, 0x0841, USB_QUIRK_NONE
, 0 }, // Samsung SE-S084
48 /* Silence the warning for known devices with more
49 * than one interface. The 'interface' value should specify the
50 * interface we want to use (interface numbers usually start at 0).
52 { 0x1267, 0x0103, USB_QUIRK_NONE
, 0 }, // Keyboard Trust KB-1800S
53 { 0x0a12, 0x0001, USB_QUIRK_NONE
, 0 }, // Bluetooth Allnet ALL1575
55 /* Currently unsupported, possibly interesting devices:
56 * FTDI serial: device 0x0403:0x6001 is USB 1.10 (class ff)
57 * UPEK TouchChip: device 0x147e:0x2016 is USB 1.0 (class ff)
61 #if CONFIG(LP_USB_PCI)
62 usb_quirks_t pci_quirks
[] = {
63 /* QEMU XHCI root hub does not implement port change detect */
64 { 0x1b36, 0x000d, USB_QUIRK_HUB_NO_USBSTS_PCD
, 0 },
67 u32
pci_quirk_check(pcidev_t controller
)
70 u16 vendor
= pci_read_config16(controller
, REG_VENDOR_ID
);
71 u16 device
= pci_read_config16(controller
, REG_DEVICE_ID
);
73 for (i
= 0; i
< ARRAY_SIZE(pci_quirks
); i
++) {
74 if ((pci_quirks
[i
].vendor
== vendor
) &&
75 (pci_quirks
[i
].device
== device
)) {
76 printf("PCI quirks enabled: %08x\n", pci_quirks
[i
].quirks
);
77 return pci_quirks
[i
].quirks
;
81 return USB_QUIRK_NONE
;
85 u32
usb_quirk_check(u16 vendor
, u16 device
)
88 for (i
= 0; i
< ARRAY_SIZE(usb_quirks
); i
++) {
89 if ((usb_quirks
[i
].vendor
== vendor
) &&
90 (usb_quirks
[i
].device
== device
)) {
91 usb_debug("USB quirks enabled: %08x\n",
92 usb_quirks
[i
].quirks
);
93 return usb_quirks
[i
].quirks
;
97 return USB_QUIRK_NONE
;
100 int usb_interface_check(u16 vendor
, u16 device
)
103 for (i
= 0; i
< ARRAY_SIZE(usb_quirks
); i
++) {
104 if ((usb_quirks
[i
].vendor
== vendor
) &&
105 (usb_quirks
[i
].device
== device
)) {
106 return usb_quirks
[i
].interface
;