src/mainboard/google/octopus/variants/bloog/overridetree.cb

   1 chip soc/intel/apollolake
   2
   3         # EMMC Tx CMD Delay
   4         # Refer to EDS-Vol2-16.32.
   5         # [14:8] steps of delay for DDR mode, each 125ps.
   6         # [6:0] steps of delay for SDR mode, each 125ps.
   7         register "emmc_tx_cmd_cntl" = "0x505"
   8
   9         # EMMC TX DATA Delay 1
  10         # Refer to EDS-Vol2-16.33.
  11         # [14:8] steps of delay for HS400, each 125ps.
  12         # [6:0] steps of delay for SDR104/HS200, each 125ps.
  13         register "emmc_tx_data_cntl1" = "0x0b0d"
  14
  15         # EMMC TX DATA Delay 2
  16         # Refer to EDS-Vol2-16.34.
  17         # [30:24] steps of delay for SDR50, each 125ps.
  18         # [22:16] steps of delay for DDR50, each 125ps.
  19         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  20         # [6:0] steps of delay for SDR12, each 125ps.
  21         register "emmc_tx_data_cntl2" = "0x1c2a2a2a"
  22
  23         # EMMC RX CMD/DATA Delay 1
  24         # Refer to EDS-Vol2-16.35.
  25         # [30:24] steps of delay for SDR50, each 125ps.
  26         # [22:16] steps of delay for DDR50, each 125ps.
  27         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  28         # [6:0] steps of delay for SDR12, each 125ps.
  29         register "emmc_rx_cmd_data_cntl1" = "0x00171a1a"
  30
  31         # EMMC RX CMD/DATA Delay 2
  32         # Refer to EDS-Vol2-16.37.
  33         # [17:16] stands for Rx Clock before Output Buffer
  34         # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
  35         # [6:0] steps of delay for HS200, each 125ps.
  36         register "emmc_rx_cmd_data_cntl2" = "0x10028"
  37
  38         # EMMC Rx Strobe Delay
  39         # Refer to EDS-Vol2-16.36.
  40         # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps.
  41         # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
  42         register "emmc_rx_strobe_cntl" = "0x0b0b"
  43
  44         # Intel Common SoC Config
  45         #+-------------------+---------------------------+
  46         #| Field             |  Value                    |
  47         #+-------------------+---------------------------+
  48         #| GSPI0             | cr50 TPM. Early init is   |
  49         #|                   | required to set up a BAR  |
  50         #|                   | for TPM communication     |
  51         #|                   | before memory is up       |
  52         #| I2C5              | Audio                     |
  53         #| I2C6              | Trackpad                  |
  54         #| I2C7              | Touchscreen               |
  55         #+-------------------+---------------------------+
  56
  57         register "tcc_offset" = "10"
  58
  59         register "common_soc_config" = "{
  60                 .gspi[0] = {
  61                         .speed_mhz = 1,
  62                         .early_init = 1,
  63                 },
  64                 .i2c[5] = {
  65                         .speed = I2C_SPEED_FAST,
  66                         .rise_time_ns = 104,
  67                         .fall_time_ns = 52,
  68                 },
  69                 .i2c[6] = {
  70                         .speed = I2C_SPEED_FAST,
  71                         .rise_time_ns = 66,
  72                         .fall_time_ns = 90,
  73                         .data_hold_time_ns = 350,
  74                 },
  75                 .i2c[7] = {
  76                         .speed = I2C_SPEED_FAST,
  77                         .rise_time_ns = 44,
  78                         .fall_time_ns = 90,
  79                 },
  80
  81         }"
  82
  83         device domain 0 on
  84                 device pci 16.0 off  end     # - I2C 0
  85                 device pci 17.1 on
  86                         chip drivers/i2c/da7219
  87                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
  88                                 register "btn_cfg" = "50"
  89                                 register "mic_det_thr" = "200"
  90                                 register "jack_ins_deb" = "20"
  91                                 register "jack_det_rate" = ""32ms_64ms""
  92                                 register "jack_rem_deb" = "1"
  93                                 register "a_d_btn_thr" = "0xa"
  94                                 register "d_b_btn_thr" = "0x16"
  95                                 register "b_c_btn_thr" = "0x21"
  96                                 register "c_mic_btn_thr" = "0x3e"
  97                                 register "btn_avg" = "4"
  98                                 register "adc_1bit_rpt" = "1"
  99                                 register "micbias_lvl" = "2600"
 100                                 register "mic_amp_in_sel" = ""diff""
 101                                 device i2c 1a on end
 102                         end
 103                         chip drivers/i2c/generic
 104                                 register "hid" = ""10EC5682""
 105                                 register "name" = ""RT58""
 106                                 register "desc" = ""Realtek RT5682""
 107                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 108                                 register "probed" = "1"
 109                                 register "property_count" = "1"
 110                                 # Set the jd_src to RT5668_JD1 for jack detection
 111                                 register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
 112                                 register "property_list[0].name" = ""realtek,jd-src""
 113                                 register "property_list[0].integer" = "1"
 114                                 device i2c 1a on end
 115                         end
 116                 end     # - I2C 5
 117                 device pci 17.2 on
 118                         chip drivers/i2c/generic
 119                                 register "hid" = ""ELAN0000""
 120                                 register "desc" = ""ELAN Touchpad""
 121                                 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPIO_135_IRQ)"
 122                                 register "wake" = "GPE0_DW3_27"
 123                                 register "detect" = "1"
 124                                 device i2c 15 on end
 125                         end
 126                 end     # - I2C 6
 127                 device pci 17.3 on
 128                         chip drivers/i2c/generic
 129                                 register "hid" = ""ELAN0001""
 130                                 register "desc" = ""ELAN Touchscreen""
 131                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 132                                 register "detect" = "1"
 133                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 134                                 register "reset_delay_ms" = "20"
 135                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 136                                 register "enable_delay_ms" = "1"
 137                                 register "has_power_resource" = "1"
 138                                 device i2c 10 on end
 139                         end
 140                         chip drivers/i2c/hid
 141                                 register "generic.hid" = ""GDIX0000""
 142                                 register "generic.desc" = ""Goodix Touchscreen""
 143                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 144                                 register "generic.detect" = "1"
 145                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 146                                 register "generic.reset_delay_ms" = "120"
 147                                 register "generic.reset_off_delay_ms" = "3"
 148                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 149                                 register "generic.has_power_resource" = "1"
 150                                 register "generic.enable_delay_ms" = "10"
 151                                 register "hid_desc_reg_offset" = "0x01"
 152                                 device i2c 5d on end
 153                         end
 154                         chip drivers/i2c/hid
 155                                 register "generic.hid" = ""GTCH7503""
 156                                 register "generic.desc" = ""G2TOUCH Touchscreen""
 157                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 158                                 register "generic.detect" = "1"
 159                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 160                                 register "generic.reset_delay_ms" = "50"
 161                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 162                                 register "generic.enable_delay_ms" = "1"
 163                                 register "generic.has_power_resource" = "1"
 164                                 register "hid_desc_reg_offset" = "0x01"
 165                                 device i2c 40 on end
 166                         end
 167                 end     # - I2C 7
 168         end
 169
 170         # Disable compliance mode
 171         register "disable_compliance_mode" = "1"
 172 end