src/mainboard/google/octopus/variants/fleex/overridetree.cb

   1 chip soc/intel/apollolake
   2
   3         # EMMC Tx CMD Delay
   4         # Refer to EDS-Vol2-16.32.
   5         # [14:8] steps of delay for DDR mode, each 125ps.
   6         # [6:0] steps of delay for SDR mode, each 125ps.
   7         register "emmc_tx_cmd_cntl" = "0x505"
   8
   9         # EMMC TX DATA Delay 1
  10         # Refer to EDS-Vol2-16.33.
  11         # [14:8] steps of delay for HS400, each 125ps.
  12         # [6:0] steps of delay for SDR104/HS200, each 125ps.
  13         register "emmc_tx_data_cntl1" = "0x0a0c"
  14
  15         # EMMC TX DATA Delay 2
  16         # Refer to EDS-Vol2-16.34.
  17         # [30:24] steps of delay for SDR50, each 125ps.
  18         # [22:16] steps of delay for DDR50, each 125ps.
  19         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  20         # [6:0] steps of delay for SDR12, each 125ps.
  21         register "emmc_tx_data_cntl2" = "0x1c282828"
  22
  23         # EMMC RX CMD/DATA Delay 1
  24         # Refer to EDS-Vol2-16.35.
  25         # [30:24] steps of delay for SDR50, each 125ps.
  26         # [22:16] steps of delay for DDR50, each 125ps.
  27         # [14:8] steps of delay for SDR25/HS50, each 125ps.
  28         # [6:0] steps of delay for SDR12, each 125ps.
  29         register "emmc_rx_cmd_data_cntl1" = "0x00181818"
  30
  31         # EMMC RX CMD/DATA Delay 2
  32         # Refer to EDS-Vol2-16.37.
  33         # [17:16] stands for Rx Clock before Output Buffer
  34         # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
  35         # [6:0] steps of delay for HS200, each 125ps.
  36         register "emmc_rx_cmd_data_cntl2" = "0x1001f"
  37
  38         # EMMC Rx Strobe Delay
  39         # Refer to EDS-Vol2-16.36.
  40         # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps.
  41         # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
  42         register "emmc_rx_strobe_cntl" = "0x0b0b"
  43
  44         # Intel Common SoC Config
  45         #+-------------------+---------------------------+
  46         #| Field             |  Value                    |
  47         #+-------------------+---------------------------+
  48         #| GSPI0             | cr50 TPM. Early init is   |
  49         #|                   | required to set up a BAR  |
  50         #|                   | for TPM communication     |
  51         #|                   | before memory is up       |
  52         #| I2C5              | Audio                     |
  53         #| I2C6              | Trackpad                  |
  54         #| I2C7              | Touchscreen               |
  55         #+-------------------+---------------------------+
  56
  57         register "tcc_offset" = "10"
  58
  59         register "common_soc_config" = "{
  60                 .gspi[0] = {
  61                         .speed_mhz = 1,
  62                         .early_init = 1,
  63                 },
  64                 .i2c[0] = {
  65                         .speed = I2C_SPEED_FAST,
  66                         .rise_time_ns = 25,
  67                         .fall_time_ns = 52,
  68                 },
  69                 .i2c[5] = {
  70                         .speed = I2C_SPEED_FAST,
  71                         .rise_time_ns = 104,
  72                         .fall_time_ns = 52,
  73                 },
  74                 .i2c[6] = {
  75                         .speed = I2C_SPEED_FAST,
  76                         .rise_time_ns = 66,
  77                         .fall_time_ns = 90,
  78                         .data_hold_time_ns = 350,
  79                 },
  80                 .i2c[7] = {
  81                         .speed = I2C_SPEED_FAST,
  82                         .rise_time_ns = 76,
  83                         .fall_time_ns = 164,
  84                 },
  85         }"
  86
  87         # Disable compliance mode
  88         register "disable_compliance_mode" = "1"
  89         register "disable_xhci_lfps_pm" = "0"
  90
  91         device domain 0 on
  92                 device pci 16.0 on
  93                         chip drivers/i2c/hid
  94                                 register "generic.hid" = ""WCOM50C1""
  95                                 register "generic.desc" = ""WCOM Digitizer""
  96                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_139_IRQ)"
  97                                 register "generic.reset_gpio" =
  98                                                         "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
  99                                 register "generic.reset_delay_ms" = "20"
 100                                 register "generic.has_power_resource" = "1"
 101                                 register "generic.detect" = "1"
 102                                 register "hid_desc_reg_offset" = "0x1"
 103                                 device i2c 0x9 on end
 104                         end
 105                 end     # - I2C 0
 106                 device pci 16.1 off  end        # - I2C 1
 107                 device pci 17.1 on
 108                         chip drivers/i2c/da7219
 109                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 110                                 register "btn_cfg" = "50"
 111                                 register "mic_det_thr" = "200"
 112                                 register "jack_ins_deb" = "20"
 113                                 register "jack_det_rate" = ""32ms_64ms""
 114                                 register "jack_rem_deb" = "1"
 115                                 register "a_d_btn_thr" = "0xa"
 116                                 register "d_b_btn_thr" = "0x16"
 117                                 register "b_c_btn_thr" = "0x21"
 118                                 register "c_mic_btn_thr" = "0x3e"
 119                                 register "btn_avg" = "4"
 120                                 register "adc_1bit_rpt" = "1"
 121                                 register "micbias_lvl" = "2600"
 122                                 register "mic_amp_in_sel" = ""diff""
 123                                 device i2c 1a on end
 124                         end
 125                         chip drivers/i2c/generic
 126                                 register "hid" = ""10EC5682""
 127                                 register "name" = ""RT58""
 128                                 register "desc" = ""Realtek RT5682""
 129                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 130                                 register "probed" = "1"
 131                                 register "property_count" = "1"
 132                                 # Set the jd_src to RT5668_JD1 for jack detection
 133                                 register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
 134                                 register "property_list[0].name" = ""realtek,jd-src""
 135                                 register "property_list[0].integer" = "1"
 136                                 device i2c 1a on end
 137                         end
 138                         chip drivers/i2c/cs42l42
 139                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
 140                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_144)"
 141                                 register "ts_inv" = "true"
 142                                 register "ts_dbnc_rise" = "RISE_DEB_1000_MS"
 143                                 register "ts_dbnc_fall" = "FALL_DEB_0_MS"
 144                                 register "btn_det_init_dbnce" = "100"
 145                                 register "btn_det_event_dbnce" = "10"
 146                                 register "bias_lvls[0]" = "15"
 147                                 register "bias_lvls[1]" = "8"
 148                                 register "bias_lvls[2]" = "4"
 149                                 register "bias_lvls[3]" = "1"
 150                                 register "hs_bias_ramp_rate" = "HSBIAS_RAMP_SLOW"
 151                                 register "hs_bias_sense_disable" = "true"
 152                                 device i2c 48 on end
 153                         end
 154                 end     # - I2C 5
 155                 device pci 17.2 on
 156                         chip drivers/i2c/generic
 157                                 register "hid" = ""ELAN0000""
 158                                 register "desc" = ""ELAN Touchpad""
 159                                 register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPIO_135_IRQ)"
 160                                 register "wake" = "GPE0_DW3_27"
 161                                 register "detect" = "1"
 162                                 device i2c 15 on end
 163                         end
 164                         chip drivers/i2c/hid
 165                                 register "generic.hid" = ""GXTP7288""
 166                                 register "generic.desc" = ""Goodix Touchpad""
 167                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_135_IRQ)"
 168                                 register "generic.wake" = "GPE0_DW3_27"
 169                                 register "generic.detect" = "1"
 170                                 register "hid_desc_reg_offset" = "0x20"
 171                                 device i2c 2c on end
 172                         end
 173                 end     # - I2C 6
 174                 device pci 17.3 on
 175                         chip drivers/i2c/generic
 176                                 register "hid" = ""ELAN0001""
 177                                 register "desc" = ""ELAN Touchscreen""
 178                                 register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 179                                 register "detect" = "1"
 180                                 register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 181                                 register "reset_delay_ms" = "20"
 182                                 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 183                                 register "enable_delay_ms" = "1"
 184                                 register "has_power_resource" = "true"
 185                                 device i2c 10 on end
 186                         end
 187                         chip drivers/i2c/hid
 188                                 register "generic.hid" = ""WDHT0002""
 189                                 register "generic.desc" = ""WDT Touchscreen""
 190                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 191                                 register "generic.detect" = "1"
 192                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 193                                 register "generic.reset_delay_ms" = "130"
 194                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 195                                 register "generic.enable_delay_ms" = "2"
 196                                 register "generic.has_power_resource" = "1"
 197                                 register "hid_desc_reg_offset" = "0x20"
 198                                 device i2c 2c on end
 199                         end
 200                         chip drivers/i2c/hid
 201                                 register "generic.hid" = ""GTCH7503""
 202                                 register "generic.desc" = ""G2TOUCH Touchscreen""
 203                                 register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
 204                                 register "generic.detect" = "1"
 205                                 register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
 206                                 register "generic.reset_delay_ms" = "50"
 207                                 register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
 208                                 register "generic.enable_delay_ms" = "1"
 209                                 register "generic.has_power_resource" = "1"
 210                                 register "hid_desc_reg_offset" = "0x01"
 211                                 device i2c 40 on end
 212                         end
 213                 end     # - I2C 7
 214         end
 215 end