Documentation: Fix wrong link to commit message guidelines

[coreboot2.git] / src / mainboard / starlabs / starbook / variants / cml / devicetree.cb

chip soc/intel/cannonlake
        # FSP UPDs
        register "eist_enable"                  = "true"
        register "enable_c6dram"                = "1"
        register "SaGv"                         = "SaGv_Enabled"

        # Graphics
        # IGD Displays
        register "panel_cfg" = "{
                .up_delay_ms                    =  0,                           // T3
                .backlight_on_delay_ms          =  0,                           // T7
                .backlight_off_delay_ms         =  0,                           // T9
                .down_delay_ms                  =  0,                           // T10
                .cycle_delay_ms                 =  500,                         // T12
                .backlight_pwm_hz               =  200,                         // PWM
        }"

        # Serial I/O
        register "SerialIoDevMode" = "{
                [PchSerialIoIndexI2C0]          = PchSerialIoPci,
                [PchSerialIoIndexI2C4]          = PchSerialIoSkipInit,
                [PchSerialIoIndexUART2]         = PchSerialIoSkipInit,
        }"

        register "common_soc_config" = "{
                .i2c[0] = {
                        .speed                          = I2C_SPEED_FAST,
                },
        }"

        # Power
        register "PchPmSlpS3MinAssert"          = "2"                           # 50ms
        register "PchPmSlpS4MinAssert"          = "3"                           # 1s
        register "PchPmSlpSusMinAssert"         = "3"                           # 500ms
        register "PchPmSlpAMinAssert"           = "3"                           # 2s

        # PCIe Clock
        register "PcieClkSrcClkReq[0]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[2]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[3]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[4]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[5]"          = "PCIE_CLK_NOTUSED"

# Actual device tree.
        device domain 0 on
                device ref igpu on
                        register "gfx"                          = "GMA_DEFAULT_PANEL(0)"
                end
                device ref xhci on
                        # Motherboard USB 3.0 Type-C
                        register "usb2_ports[0]"                = "USB2_PORT_TYPE_C(OC_SKIP)"
                        register "usb3_ports[0]"                = "USB3_PORT_DEFAULT(OC_SKIP)"

                        # Motherboard USB 3.0 Type-A
                        register "usb2_ports[1]"                = "USB2_PORT_MID(OC_SKIP)"
                        register "usb3_ports[1]"                = "USB3_PORT_DEFAULT(OC_SKIP)"

                        # Daughterboard SD Card
                        register "usb2_ports[3]"                = "USB2_PORT_MID(OC_SKIP)"

                        # Daughterboard USB 3.0 Type-A
                        register "usb2_ports[5]"                = "USB2_PORT_MID(OC_SKIP)"
                        register "usb3_ports[2]"                = "USB3_PORT_DEFAULT(OC_SKIP)"

                        # Webcam
                        register "usb2_ports[CONFIG_CCD_PORT]"  = "USB2_PORT_MID(OC_SKIP)"

                        # Internal Bluetooth
                        register "usb2_ports[9]"                = "USB2_PORT_MID(OC_SKIP)"

                        chip drivers/usb/acpi
                                device ref xhci_root_hub on
                                        chip drivers/usb/acpi
                                                register "desc"         = ""USB Type-C""
                                                register "type"         = "UPC_TYPE_C_USB2_SS_SWITCH"
                                                register "group"        = "ACPI_PLD_GROUP(0, 0)"
                                                device ref usb2_port1 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""USB Type-C""
                                                register "type"         = "UPC_TYPE_C_USB2_SS_SWITCH"
                                                register "group"        = "ACPI_PLD_GROUP(0, 0)"
                                                device ref usb3_port1 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Left USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 1)"
                                                device ref usb2_port2 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Left USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 1)"
                                                device ref usb3_port2 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Right USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 2)"
                                                device ref usb2_port6 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Right USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 2)"
                                                device ref usb3_port3 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Internal Webcam""
                                                register "type"         = "UPC_TYPE_INTERNAL"
                                                register "group"        = "ACPI_PLD_GROUP(0, 3)"
                                                device ref usb2_port7 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""MicroSD Card Reader""
                                                register "type"         = "UPC_TYPE_INTERNAL"
                                                register "group"        = "ACPI_PLD_GROUP(0, 4)"
                                                device ref usb2_port4 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Internal Bluetooth""
                                                register "type"         = "UPC_TYPE_INTERNAL"
                                                register "group"        = "ACPI_PLD_GROUP(0, 5)"
                                                register "is_intel_bluetooth" = "1"
                                                register "enable_gpio"  = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(CNV_BTEN)"
                                                register "reset_gpio"   = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B4)"
                                                device ref usb2_port10 on end
                                        end
                                end
                        end
                end
                device ref shared_sram on  end
                device ref cnvi_wifi on
                        chip drivers/wifi/generic
                                register "add_acpi_dma_property"        = "true"
                                register "enable_cnvi_ddr_rfim"         = "true"
                                device generic 0 on end
                        end
                end
                device ref i2c0 on
                        chip drivers/i2c/hid
                                register "generic.hid"          = ""STAR0001""
                                register "generic.desc"         = ""Touchpad""
                                register "generic.irq"          = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
                                register "generic.detect"       = "1"
                                register "hid_desc_reg_offset"  = "0x20"
                                device i2c 2c on end
                        end
                end
                device ref sata on
                        register "SataSalpSupport"              = "1"
                        # Port 1
                        register "SataPortsEnable[1]"           = "1"
                        register "SataPortsDevSlp[1]"           = "1"
                end
                device ref i2c4 on  end
                device ref uart2 on  end
                device ref pcie_rp9 on                                          # SSD x4
                        register "PcieRpSlotImplemented[8]"     = "1"
                        register "PcieRpEnable[8]"              = "1"
                        register "PcieRpLtrEnable[8]"           = "1"
                        register "PcieClkSrcUsage[1]"           = "0x08"
                        register "PcieClkSrcClkReq[1]"          = "1"
                        smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X"
                end
                device ref lpc_espi on
                        register "gen1_dec"                     = "0x000c0681"
                        register "gen2_dec"                     = "0x000c1641"
                        register "gen3_dec"                     = "0x00fc0201"
                        register "gen4_dec"                     = "0x000c0081"

                        chip ec/starlabs/merlin
                                # Port pair 4Eh/4Fh
                                device pnp 4e.00 on  end                        # IO Interface
                                device pnp 4e.01 off end                        # Com 1
                                device pnp 4e.02 off end                        # Com 2
                                device pnp 4e.04 off end                        # System Wake-Up
                                device pnp 4e.05 off end                        # PS/2 Mouse
                                device pnp 4e.06 on                             # PS/2 Keyboard
                                        io 0x60                 = 0x0060
                                        io 0x62                 = 0x0064
                                        irq 0x70                = 1
                                end
                                device pnp 4e.0a off end                        # Consumer IR
                                device pnp 4e.0f off end                        # Shared Memory/Flash Interface
                                device pnp 4e.10 off end                        # RTC-like Timer
                                device pnp 4e.11 off end                        # Power Management Channel 1
                                device pnp 4e.12 off end                        # Power Management Channel 2
                                device pnp 4e.13 off end                        # Serial Peripheral Interface
                                device pnp 4e.14 off end                        # Platform EC Interface
                                device pnp 4e.17 off end                        # Power Management Channel 3
                                device pnp 4e.18 off end                        # Power Management Channel 4
                                device pnp 4e.19 off end                        # Power Management Channel 5
                        end
                end
                device ref hda on
                        subsystemid 0x10ec 0x1200
                        register "PchHdaAudioLinkHda"           = "1"
                end
                device ref smbus on  end
                chip drivers/crb
                        device mmio 0xfed40000 on end
                end
        end
end