cbfs: Remove remnants of ext-win-*

[coreboot2.git] / src / mainboard / starlabs / starbook / variants / tgl / devicetree.cb

chip soc/intel/tigerlake
        # FSP UPDs
        register "eist_enable"                  = "true"
        register "CnviBtCore"                   = "true"
        register "CnviBtAudioOffload"           = "1"
        register "SaGv"                         = "SaGv_Enabled"

        # Graphics
        # Not used but timings left for reference
        # register "panel_cfg" = "{
        #       .up_delay_ms                    = 2000,                         // T3
        #       .backlight_on_delay_ms          = 0,                            // T7
        #       .backlight_off_delay_ms         = 2000,                         // T9
        #       .down_delay_ms                  = 500,                          // T10
        #       .cycle_delay_ms                 = 500,                          // T12
        #       .backlight_pwm_hz               = 200,                          // PWM
        # }"

        # Serial I/O
        register "SerialIoI2cMode" = "{
                [PchSerialIoIndexI2C0]          = PchSerialIoPci,
                [PchSerialIoIndexI2C4]          = PchSerialIoSkipInit,
        }"

        register "SerialIoUartMode" = "{
                [PchSerialIoIndexUART2]         = PchSerialIoSkipInit,
        }"

        # Power
        register "PchPmSlpS3MinAssert"          = "2"                           # 50ms
        register "PchPmSlpS4MinAssert"          = "3"                           # 1s
        register "PchPmSlpSusMinAssert"         = "3"                           # 500ms
        register "PchPmSlpAMinAssert"           = "3"                           # 2s

        # Enable the correct decode ranges on the LPC bus.
        register "lpc_ioe"                      = "LPC_IOE_EC_4E_4F |
                                                   LPC_IOE_SUPERIO_2E_2F |
                                                   LPC_IOE_KBC_60_64 |
                                                   LPC_IOE_EC_62_66 |
                                                   LPC_IOE_LGE_200"

        # PCIe Clock
        register "PcieClkSrcClkReq[0]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[1]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[2]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[4]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[5]"          = "PCIE_CLK_NOTUSED"
        register "PcieClkSrcClkReq[6]"          = "PCIE_CLK_NOTUSED"

# Actual device tree.
        device domain 0 on
                device ref igpu         on  end
                device ref tbt_pcie_rp0 on  end
                device ref gna          on  end
                device ref crashlog     on  end
                device ref north_xhci   on
                        register "UsbTcPortEn"                  = "1"
                        register "TcssXhciEn"                   = "1"
                        register "TcssAuxOri"                   = "0"
                        chip drivers/usb/acpi
                                device ref tcss_root_hub on
                                        chip drivers/usb/acpi
                                                register "desc"         = ""USB Type-C""
                                                register "type"         = "UPC_TYPE_C_USB2_SS_SWITCH"
                                                register "group"        = "ACPI_PLD_GROUP(0, 0)"
                                                device ref tcss_usb3_port1 on end
                                        end
                                end
                        end
                end
                device ref tbt_dma0     on
                        chip drivers/intel/usb4/retimer
                                register "dfp[0].power_gpio"    = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A23)"
                                use tcss_usb3_port1 as dfp[0].typec_port
                                device generic 0 on end
                        end
                end
                device ref south_xhci   on
                        # Motherboard USB TBT Type-C
                        register "usb2_ports[0]"                = "USB2_PORT_TYPE_C(OC_SKIP)"
                        register "tcss_ports[0]"                = "TCSS_PORT_DEFAULT(OC_SKIP)"

                        # Motherboard USB 3.0 Type-A
                        register "usb2_ports[1]"                = "USB2_PORT_MID(OC_SKIP)"
                        register "usb3_ports[0]"                = "USB3_PORT_DEFAULT(OC_SKIP)"

                        # Daughterboard USB 3.0 Type-A
                        register "usb2_ports[2]"                = "USB2_PORT_MID(OC_SKIP)"
                        register "usb3_ports[1]"                = "USB3_PORT_DEFAULT(OC_SKIP)"

                        # Daughterboard USB 2.0 Type-A + SD Card Reader
                        register "usb2_ports[5]"                = "USB2_PORT_MID(OC_SKIP)"

                        # Webcam
                        register "usb2_ports[CONFIG_CCD_PORT]"  = "USB2_PORT_MID(OC_SKIP)"

                        # Internal Bluetooth
                        register "usb2_ports[9]"                = "USB2_PORT_MID(OC_SKIP)"

                        chip drivers/usb/acpi
                                device ref xhci_root_hub on
                                        chip drivers/usb/acpi
                                                register "desc"         = ""USB Type-C""
                                                register "type"         = "UPC_TYPE_C_USB2_SS_SWITCH"
                                                register "group"        = "ACPI_PLD_GROUP(0, 0)"
                                                device ref usb2_port1 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Left USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 1)"
                                                device ref usb2_port2 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Left USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 1)"
                                                device ref usb3_port1 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Right USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 2)"
                                                device ref usb2_port3 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Right USB Type-A""
                                                register "type"         = "UPC_TYPE_USB3_A"
                                                register "group"        = "ACPI_PLD_GROUP(0, 2)"
                                                device ref usb3_port2 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Internal Webcam""
                                                register "type"         = "UPC_TYPE_INTERNAL"
                                                register "group"        = "ACPI_PLD_GROUP(0, 3)"
                                                device ref usb2_port4 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""USB 2.0 Hub""
                                                register "type"         = "UPC_TYPE_HUB"
                                                register "group"        = "ACPI_PLD_GROUP(0, 4)"
                                                device ref usb2_port6 on end
                                        end
                                        chip drivers/usb/acpi
                                                register "desc"         = ""Internal Bluetooth""
                                                register "type"         = "UPC_TYPE_INTERNAL"
                                                register "group"        = "ACPI_PLD_GROUP(0, 5)"
                                                device ref usb2_port10 on end
                                        end
                                end
                        end
                end
                device ref shared_ram   on  end
                device ref cnvi_wifi    on
                        chip drivers/wifi/generic
                                register "wake"                 = "GPE0_PME_B0"
                                device generic 0 on end
                        end
                end
                device ref i2c0         on
                        chip drivers/i2c/hid
                                register "generic.hid"          = ""STAR0001""
                                register "generic.desc"         = ""Touchpad""
                                register "generic.irq"          = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)"
                                register "generic.detect"       = "1"
                                register "hid_desc_reg_offset"  = "0x20"
                                device i2c 2c on end
                        end
                end
                device ref heci1        on  end
                device ref sata         on
                        register "SataSalpSupport"              = "1"
                        # Port 1
                        register "SataPortsEnable[1]"           = "1"
                        register "SataPortsDevSlp[1]"           = "1"
                end
                device ref i2c4         on  end
                device ref uart2        on  end
                device ref pcie_rp9     on
                        register "HybridStorageMode"            = "0"
                        register "PcieRpLtrEnable[8]"           = "1"
                        register "PcieClkSrcUsage[3]"           = "0x08"
                        register "PcieClkSrcClkReq[3]"          = "3"
                        register "PcieRpSlotImplemented[8]"     = "1"
                        smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X"
                        chip soc/intel/common/block/pcie/rtd3
                                register "enable_gpio"          = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D16)"
                                register "reset_gpio"           = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
                                register "srcclk_pin"           = "3"
                                device generic 0 on end
                        end
                end
                device ref gspi1        on  end
                device ref pch_espi     on
                        register "gen1_dec"                     = "0x000c1641"
                        register "gen2_dec"                     = "0x000c0681"
                        register "gen3_dec"                     = "0x000c0081"
                        chip drivers/pc80/tpm
                                device pnp 0c31.0 on end
                        end

                        chip ec/starlabs/merlin
                                # Port pair 4Eh/4Fh
                                device pnp 4e.00 on  end                        # IO Interface
                                device pnp 4e.01 off end                        # Com 1
                                device pnp 4e.02 off end                        # Com 2
                                device pnp 4e.04 off end                        # System Wake-Up
                                device pnp 4e.05 off end                        # PS/2 Mouse
                                device pnp 4e.06 on                             # PS/2 Keyboard
                                        io 0x60                 = 0x0060
                                        io 0x62                 = 0x0064
                                        irq 0x70                = 1
                                end
                                device pnp 4e.0a off end                        # Consumer IR
                                device pnp 4e.0f off end                        # Shared Memory/Flash Interface
                                device pnp 4e.10 off end                        # RTC-like Timer
                                device pnp 4e.11 off end                        # Power Management Channel 1
                                device pnp 4e.12 off end                        # Power Management Channel 2
                                device pnp 4e.13 off end                        # Serial Peripheral Interface
                                device pnp 4e.14 off end                        # Platform EC Interface
                                device pnp 4e.17 off end                        # Power Management Channel 3
                                device pnp 4e.18 off end                        # Power Management Channel 4
                                device pnp 4e.19 off end                        # Power Management Channel 5
                        end
                end
                device ref p2sb         on  end
                device ref pmc          hidden
                        chip drivers/intel/pmc_mux
                                device generic 0 on
                                        chip drivers/intel/pmc_mux/conn
                                                use usb2_port1 as usb2_port
                                                use tcss_usb3_port1 as usb3_port
                                                device generic 0 alias conn0 on end
                                        end
                                end
                        end
                end
                device ref hda          on
                        subsystemid 0x10ec 0x1200
                        register "PchHdaAudioLinkHdaEnable"     = "1"
                end
                device ref smbus        on  end
        end
end