mb/starlabs/{lite_adl,byte_adl}: Don't select MAINBOARD_HAS_TPM2

[coreboot2.git] / src / mainboard / sapphire / pureplatinumh61 / devicetree.cb

# SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/sandybridge
        register "spd_addresses" = "{0x50, 0, 0x51, 0}"
        device domain 0 on
                chip southbridge/intel/bd82x6x  # Intel Series 6 Cougar Point PCH
                        register "gen1_dec" = "0x000c0291"
                        register "gen2_dec" = "0x000c0a01"
                        register "pcie_port_coalesce" = "true"
                        register "sata_interface_speed_support" = "0x3"
                        register "sata_port_map" = "0x33"
                        register "usb_port_config" = "{
                                { 1, 0, 0 },
                                { 1, 0, 0 },
                                { 1, 0, 1 },
                                { 1, 0, 1 },
                                { 1, 0, 2 },
                                { 1, 0, 2 },
                                { 1, 0, 3 },
                                { 1, 0, 3 },
                                { 1, 0, 4 },
                                { 1, 0, 4 },
                                { 1, 0, 6 },
                                { 1, 0, 5 },
                                { 1, 0, 5 },
                                { 1, 0, 6 }
                        }"

                        register "spi.opprefixes" = "{ 0x50, 0x06 }"
                        register "spi.ops" = "{{0x01, WRITE_NO_ADDR},
                                                {0x02, WRITE_WITH_ADDR},
                                                {0x03, READ_WITH_ADDR},
                                                {0x05, READ_NO_ADDR},
                                                {0x20, WRITE_WITH_ADDR},
                                                {0x9f, READ_NO_ADDR},
                                                {0xad, WRITE_NO_ADDR},
                                                {0x04, WRITE_NO_ADDR}}"
                        device ref mei1 on      # Management Engine Interface 1
                                subsystemid 0x174b 0x1007
                        end
                        device ref mei2 off end # Management Engine Interface 2
                        device ref me_ide_r off end     # Management Engine IDE-R
                        device ref me_kt off end        # Management Engine KT
                        device ref gbe off end  # Intel Gigabit Ethernet
                        device ref ehci2 on     # USB2 EHCI #2
                                subsystemid 0x174b 0x1007
                        end
                        device ref hda on       # HD Audio Controller
                                subsystemid 0x8086 0x1c20
                        end
                        device ref pcie_rp1 on  # PCIe Port #1
                                subsystemid 0x174b 0x1007
                        end
                        device ref pcie_rp2 off end     # PCIe Port #2
                        device ref pcie_rp3 off end     # PCIe Port #3
                        device ref pcie_rp4 off end     # PCIe Port #4
                        device ref pcie_rp5 on  # PCIe Port #5
                                subsystemid 0x174b 0x1007
                        end
                        device ref pcie_rp6 on  # PCIe Port #6
                                subsystemid 0x174b 0x1007
                        end
                        device ref pcie_rp7 off end     # PCIe Port #7
                        device ref pcie_rp8 off end     # PCIe Port #8
                        device ref ehci1 on     # USB2 EHCI #1
                                subsystemid 0x174b 0x1007
                        end
                        device ref pci_bridge off end   # PCI bridge
                        device ref lpc on       # LPC bridge
                                subsystemid 0x174b 0x1007
                                chip superio/fintek/f71808a
                                        register "multi_function_register_0" = "0x00"
                                        register "multi_function_register_1" = "0xc4"
                                        register "multi_function_register_2" = "0x21"
                                        register "multi_function_register_3" = "0x2f"
                                        register "multi_function_register_4" = "0x5c"
                                        register "hwm_peci_tsi_ctrl" = "0x02"   # PECI enabled, 1.23 V
                                        register "hwm_tcc_temp" = "0x66"        # TCC temperature = 102 °C
                                        register "hwm_fan1_seg1_speed" = "0xff" # Fan 1 segment 1 = 100%
                                        register "hwm_fan1_seg2_speed" = "0xdb" # Fan 1 segment 2 = 86%
                                        register "hwm_fan1_seg3_speed" = "0xbc" # Fan 1 segment 3 = 74%
                                        register "hwm_fan1_seg4_speed" = "0x9e" # Fan 1 segment 4 = 62%
                                        register "hwm_fan1_seg5_speed" = "0x7f" # Fan 1 segment 5 = 50%
                                        register "hwm_fan1_temp_src" = "0x18"   # Fan 1 source = PECI
                                        register "hwm_fan2_seg1_speed" = "0xff" # Fan 2 segment 1 = 100%
                                        register "hwm_fan2_seg2_speed" = "0xdb" # Fan 2 segment 2 = 86%
                                        register "hwm_fan2_seg3_speed" = "0xbc" # Fan 2 segment 3 = 74%
                                        register "hwm_fan2_seg4_speed" = "0x9e" # Fan 2 segment 4 = 62%
                                        register "hwm_fan2_seg5_speed" = "0x7f" # Fan 2 segment 5 = 50%
                                        register "hwm_fan2_temp_src" = "0x1e"   # Fan 2 source = temperature 2
                                        device pnp 4e.1 off end # Serial Port 1
                                        device pnp 4e.4 on      # Hardware monitor
                                                io 0x60 = 0x295
                                                irq 0x70 = 0
                                        end
                                        device pnp 4e.5 off end # Keyboard
                                        device pnp 4e.6 on      # GPIO
                                                irq 0xc5 = 0x1f
                                        end
                                        device pnp 4e.7 on      # WDT
                                                io 0x60 = 0xa00
                                        end
                                        device pnp 4e.8 off end # CIR
                                        device pnp 4e.a on      # PME, ACPI, EUP
                                                irq 0xe0 = 0x90
                                                irq 0xf8 = 0x00
                                                irq 0xf9 = 0x09
                                                irq 0xfa = 0x00
                                        end
                                end
                        end
                        device ref sata1 on     # SATA Controller 1
                                subsystemid 0x174b 0x1007
                        end
                        device ref smbus on     # SMBus
                                subsystemid 0x174b 0x1007
                        end
                        device ref sata2 off end        # SATA Controller 2
                        device ref thermal off end      # Thermal
                end
                device ref host_bridge on       # Host bridge
                        subsystemid 0x174b 0x1007
                end
                device ref peg10 on     # PCIe Bridge for discrete graphics
                        subsystemid 0x174b 0x1007
                end
                device ref igd on       # Internal graphics VGA controller
                        subsystemid 0x8086 0x2010
                end
        end
end