soc/intel: Remove blank lines before '}' and after '{'

[coreboot2.git] / src / mainboard / asrock / h77pro4-m / devicetree.cb

# SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/sandybridge
        register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}"
        device domain 0 on
                device ref host_bridge on # Host bridge
                        subsystemid 0x1849 0x0100
                end
                device ref peg10 on end # PEG - slot "PCIE1"
                device ref igd on # iGPU
                        subsystemid 0x1849 0x0102
                end
                chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH
                        register "gen1_dec" = "0x000c0291"
                        register "gen2_dec" = "0x000c0241"
                        register "gen3_dec" = "0x000c0251"
                        register "sata_interface_speed_support" = "0x3"
                        register "sata_port_map" = "0x3f"
                        register "spi_lvscc" = "0x2005"
                        register "spi_uvscc" = "0x2005"
                        register "superspeed_capable_ports" = "0x0000000f"
                        register "xhci_overcurrent_mapping" = "0x00000c03"
                        register "xhci_switchable_ports" = "0x0000000f"
                        device ref xhci on # USB 3.0 Controller
                                subsystemid 0x1849 0x1e31
                        end
                        device ref mei1 on # Management Engine Interface 1
                                subsystemid 0x1849 0x1e3a
                        end
                        device ref mei2 off end # Management Engine Interface 2
                        device ref me_ide_r off end # Management Engine IDE-R
                        device ref me_kt off end # Management Engine KT
                        device ref gbe off end # Intel Gigabit Ethernet
                        device ref ehci2 on # USB2 EHCI #2
                                subsystemid 0x1849 0x1e2d
                        end
                        device ref hda on # High Definition Audio
                                subsystemid 0x1849 0x8892
                        end
                        device ref pcie_rp1 on # PCIe Port #1 - slot "PCIE4", 4 lanes
                                subsystemid 0x1849 0x1e10
                        end
                        device ref pcie_rp2 off end # PCIe Port #2
                        device ref pcie_rp3 off end # PCIe Port #3
                        device ref pcie_rp4 off end # PCIe Port #4
                        device ref pcie_rp5 on # PCIe Port #5 - slot "PCIE2", 1 lane
                                subsystemid 0x1849 0x1e18
                        end
                        device ref pcie_rp6 on # PCIe Port #6 - RTL8111E GbE
                                subsystemid 0x1849 0x1e1a
                                device pci 00.0 on end # PCI 10ec:8168
                        end
                        device ref pcie_rp7 on # PCIe Port #7 - slot "PCIE3", 1 lane
                                subsystemid 0x1849 0x1e16
                        end
                        device ref pcie_rp8 on # PCIe Port #8 - ASM1061 SATA Controller
                                subsystemid 0x1849 0x1e1e
                        end
                        device ref ehci1 on # USB2 EHCI #1
                                subsystemid 0x1849 0x1e26
                        end
                        device ref pci_bridge off end # PCI bridge
                        device ref lpc on # LPC bridge
                                subsystemid 0x1849 0x1e4a
                                chip superio/nuvoton/nct6776
                                        device pnp 2e.0 off end         # Floppy
                                        device pnp 2e.1 on              # Parallel port
                                                io 0x60 = 0x378
                                                irq 0x70 = 5
                                                drq 0x74 = 3
                                        end
                                        device pnp 2e.2 on              # COM1
                                                io 0x60 = 0x3f8
                                                irq 0x70 = 4
                                        end
                                        device pnp 2e.3 off end         # COM2, IR
                                        device pnp 2e.5 on              # Keyboard
                                                io 0x60 = 0x60
                                                io 0x62 = 0x64
                                                irq 0x70 = 1
                                                irq 0x72 = 12
                                        end
                                        device pnp 2e.6 off end         # CIR
                                        device pnp 2e.7   off end       # GPIO8
                                        device pnp 2e.107 off end       # GPIO9
                                        device pnp 2e.8 off end         # WDT1
                                        device pnp 2e.108 off end       # GPIO0
                                        device pnp 2e.208 off end       # GPIOA
                                        device pnp 2e.308 on            # GPIO base
                                                io 0x60 = 0x0
                                                irq 0xf0 = 0x3e         # + GPIO1 direction
                                                irq 0xf1 = 0xde         # + GPIO1 value
                                        end
                                        device pnp 2e.109 on end        # GPIO1
                                        device pnp 2e.209 on            # GPIO2
                                                irq 0xe0 = 0xff         # + GPIO2 direction
                                                irq 0xe1 = 0x0c         # + GPIO2 value
                                        end
                                        device pnp 2e.309 on            # GPIO3
                                                irq 0xe4 = 0xf7         # + GPIO3 direction
                                                irq 0xe5 = 0x08         # + GPIO3 value
                                        end
                                        device pnp 2e.409 off end       # GPIO4
                                        device pnp 2e.509 off end       # GPIO5
                                        device pnp 2e.609 off end       # GPIO6
                                        device pnp 2e.709 on end        # GPIO7
                                        device pnp 2e.a on              # ACPI
                                                irq 0xe4 = 0x10         # + enable 3VSBSW#
                                                irq 0xf0 = 0x20         # + pin 70 = 3VSBSW
                                        end
                                        device pnp 2e.b on              # HWM, front panel LED
                                                irq 0x30 = 0xe1         # + Fan RPM sense pins
                                                io  0x60 = 0x0290       # + HWM base address
                                        end
                                        device pnp 2e.d off end         # VID
                                        device pnp 2e.e off end         # CIR WAKE-UP
                                        device pnp 2e.f off end         # GPIO Push-Pull or Open-drain
                                        device pnp 2e.14 off end        # SVID
                                        device pnp 2e.16 off end        # Deep Sleep
                                        device pnp 2e.17 off end        # GPIOA
                                end
                        end
                        device ref sata1 on # SATA (AHCI)
                                subsystemid 0x1849 0x1e02
                        end
                        device ref smbus on # SMBus
                                subsystemid 0x1849 0x1e22
                        end
                        device ref sata2 off end # SATA (Legacy)
                        device ref thermal off end # Thermal
                end
        end
end