src/mainboard/msi/ms7707/devicetree.cb

   1 chip northbridge/intel/sandybridge
   2         register "spd_addresses" = "{0x50, 0, 0x52, 0}"
   3         device domain 0 on
   4                 subsystemid 0x1462 0x7707 inherit
   5
   6                 device ref host_bridge on  end  # Host bridge
   7                 device ref peg10 on  end        # PCIe Bridge for discrete graphics
   8                 device ref igd off end  # Internal graphics
   9
  10                 chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
  11                         register "docking_supported" = "0"
  12                         register "gen1_dec" = "0x000c0291"
  13                         register "gen2_dec" = "0x000c0a01"
  14                         register "pcie_port_coalesce" = "true"
  15                         register "sata_interface_speed_support" = "0x3"
  16                         register "sata_port_map" = "0x33"
  17                         register "spi_lvscc" = "0x2005"
  18                         register "spi_uvscc" = "0x2005"
  19                         register "gpe0_en" = "0x28000040"
  20                         register "usb_port_config" = "{
  21                                 {1, 0, 0},
  22                                 {1, 0, 0},
  23                                 {1, 0, 1},
  24                                 {1, 0, 1},
  25                                 {1, 0, 2},
  26                                 {1, 0, 2},
  27                                 {1, 0, 3},
  28                                 {1, 0, 3},
  29                                 {1, 0, 4},
  30                                 {1, 0, 4},
  31                                 {1, 0, 6},
  32                                 {1, 0, 5},
  33                                 {1, 0, 5},
  34                                 {1, 0, 6}
  35                         }"
  36
  37                         device ref mei1 on  end # Management Engine Interface 1
  38                         device ref mei2 off end # Management Engine Interface 2
  39                         device ref me_ide_r off end     # Management Engine IDE-R
  40                         device ref me_kt off end        # Management Engine KT
  41                         device ref gbe on  end  # Intel Gigabit Ethernet
  42                         device ref ehci2 on  end        # USB2 EHCI #2
  43                         device ref hda on  end  # HD Audio controller
  44                         device ref pcie_rp1 on  end     # PCIe Port #1
  45                         device ref pcie_rp2 off end     # PCIe Port #2
  46                         device ref pcie_rp3 off end     # PCIe Port #3
  47                         device ref pcie_rp4 off end     # PCIe Port #4
  48                         device ref pcie_rp5 off end     # PCIe Port #5
  49                         device ref pcie_rp6 off end     # PCIe Port #6
  50                         device ref pcie_rp7 on  end     # PCIe Port #7
  51                         device ref pcie_rp8 off end     # PCIe Port #8
  52                         device ref ehci1 on  end        # USB2 EHCI #1
  53                         device ref pci_bridge off end   # PCI bridge
  54                         device ref lpc on       # LPC bridge
  55                                 chip superio/fintek/f71808a
  56                                         register "multi_function_register_0" = "0x00"   # 0x28
  57                                         register "multi_function_register_1" = "0xc0"   # 0x29
  58                                         register "multi_function_register_2" = "0x20"   # 0x2a
  59                                         register "multi_function_register_3" = "0x4f"   # 0x2b
  60                                         register "multi_function_register_4" = "0x90"   # 0x2c
  61                                         register "hwm_peci_tsi_ctrl" = "0x02"   # 0x0a - PECI enabled, 1.23 V
  62                                         register "hwm_tcc_temp" = "0x64"        # 0x0c - TCC temperature = 100 °C
  63                                         register "hwm_fan1_seg1_speed" = "0xff" # 0xaa - Fan 1 segment 1
  64                                         register "hwm_fan1_seg2_speed" = "0xe2" # 0xab - Fan 1 segment 2
  65                                         register "hwm_fan1_seg3_speed" = "0xaf" # 0xac - Fan 1 segment 3
  66                                         register "hwm_fan1_seg4_speed" = "0x89" # 0xad - Fan 1 segment 4
  67                                         register "hwm_fan1_seg5_speed" = "0x72" # 0xae - Fan 1 segment 5
  68                                         register "hwm_fan1_temp_src" = "0x10"   # 0xaf - Fan 1 source = PECI
  69                                         register "hwm_fan2_seg1_speed" = "0xff" # 0xba - Fan 2 segment 1 = 100%
  70                                         register "hwm_fan2_seg2_speed" = "0xd9" # 0xbb - Fan 2 segment 2 = 86%
  71                                         register "hwm_fan2_seg3_speed" = "0xb2" # 0xbc - Fan 2 segment 3 = 74%
  72                                         register "hwm_fan2_seg4_speed" = "0x99" # 0xbd - Fan 2 segment 4 = 62%
  73                                         register "hwm_fan2_seg5_speed" = "0x80" # 0xbe - Fan 2 segment 5 = 50%
  74                                         register "hwm_fan2_temp_src" = "0x1e"   # 0xbf - Fan 2 source = temperature 2
  75
  76                                         register "hwm_domain1_en" = "0x01"
  77                                         register "hwm_fan1_boundary_hysteresis"   = "0x43"
  78                                         register "hwm_vt1_boundary_1_temperature" = "0x52"      # 82°C
  79                                         register "hwm_vt1_boundary_2_temperature" = "0x46"      # 70°C
  80                                         register "hwm_vt1_boundary_3_temperature" = "0x41"      # 65°C
  81                                         register "hwm_vt1_boundary_4_temperature" = "0x37"      # 55°C
  82
  83                                         device pnp 4e.1 off end # Serial Port
  84                                         device pnp 4e.4 on              # Hardware monitor
  85                                                 io 0x60 = 0x295
  86                                                 irq 0x70 = 0
  87                                                 # global
  88                                                 irq 0x27 = 0x10         # PWOK follows Intel sequence
  89                                                 irq 0x2d = 0x2e         # Anykey+MouseButton wakeup
  90                                         end
  91                                         device pnp 4e.5 on              # Keyboard
  92                                                 io 0x60 = 0x060
  93                                                 irq 0x70 = 1
  94                                                 irq 0x72 = 12
  95                                         end
  96                                         device pnp 4e.6 on              # GPIO
  97                                                 irq 0x70 = 0
  98                                                 irq 0xd0 = 0x20         # GPIO2 Output Enable
  99                                                 irq 0xd1 = 0x20         # GPIO2 Output Data
 100                                                 irq 0xd3 = 0x20         # GPIO2 Drive Enable
 101                                         end
 102                                         device pnp 4e.7 off             # WDT
 103                                                 io 0x60 = 0xa00
 104                                         end
 105                                         device pnp 4e.8 off end # CIR
 106                                         device pnp 4e.a on              # PME, ACPI, Power Saving Registers
 107                                                 irq 0xe2 = 0x0c         # EuP control
 108                                                 irq 0xed = 0xc0         # EuP Watchdog Control
 109                                                 irq 0xf4 = 0x10         # Keep Last State Select
 110                                                 irq 0xf9 = 0x09         # LED VSB Mode Select
 111                                         end
 112                                 end
 113                         end
 114                         device ref sata1 on  end        # SATA Controller 1
 115                         device ref smbus on  end        # SMBus
 116                         device ref sata2 off end        # SATA Controller 2
 117                         device ref thermal off end      # Thermal
 118                 end
 119         end
 120 end