src/soc/intel/alderlake/meminit.c

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2
   3 #include <console/console.h>
   4 #include <fsp/util.h>
   5 #include <soc/meminit.h>
   6 #include <string.h>
   7
   8 #define LPX_PHYSICAL_CH_WIDTH           16
   9 #define LPX_CHANNELS                    CHANNEL_COUNT(LPX_PHYSICAL_CH_WIDTH)
  10
  11 #define DDR4_PHYSICAL_CH_WIDTH          64
  12 #define DDR4_CHANNELS                   CHANNEL_COUNT(DDR4_PHYSICAL_CH_WIDTH)
  13
  14 #define DDR5_PHYSICAL_CH_WIDTH          64 /* 32*2 */
  15 #define DDR5_CHANNELS                   CHANNEL_COUNT(DDR5_PHYSICAL_CH_WIDTH)
  16
  17 static void set_rcomp_config(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *mb_cfg)
  18 {
  19         if (mb_cfg->rcomp.resistor != 0)
  20                 mem_cfg->RcompResistor = mb_cfg->rcomp.resistor;
  21
  22         for (size_t i = 0; i < ARRAY_SIZE(mem_cfg->RcompTarget); i++) {
  23                 if (mb_cfg->rcomp.targets[i] != 0)
  24                         mem_cfg->RcompTarget[i] = mb_cfg->rcomp.targets[i];
  25         }
  26 }
  27
  28 static void meminit_lp4x(FSP_M_CONFIG *mem_cfg)
  29 {
  30         mem_cfg->DqPinsInterleaved = 0;
  31 }
  32
  33 static void meminit_lp5x(FSP_M_CONFIG *mem_cfg, const struct mem_lp5x_config *lp5x_config)
  34 {
  35         mem_cfg->DqPinsInterleaved = 0;
  36         mem_cfg->Lp5CccConfig = lp5x_config->ccc_config;
  37 }
  38
  39 static void meminit_ddr(FSP_M_CONFIG *mem_cfg, const struct mem_ddr_config *ddr_config)
  40 {
  41         mem_cfg->DqPinsInterleaved = ddr_config->dq_pins_interleaved;
  42 }
  43
  44 static const struct soc_mem_cfg soc_mem_cfg[] = {
  45         [MEM_TYPE_DDR4] = {
  46                 .num_phys_channels = DDR4_CHANNELS,
  47                 .phys_to_mrc_map = {
  48                         [0] = 0,
  49                         [1] = 4,
  50                 },
  51                 .md_phy_masks = {
  52                         /*
  53                          * Only physical channel 0 is populated in case of half-populated
  54                          * configuration.
  55                          */
  56                         .half_channel = BIT(0),
  57                         /* In mixed topologies, either channel 0 or 1 can be memory-down. */
  58                         .mixed_topo = BIT(0) | BIT(1),
  59                 },
  60         },
  61         [MEM_TYPE_DDR5] = {
  62                 .num_phys_channels = DDR5_CHANNELS,
  63                 .phys_to_mrc_map = {
  64                         [0] = 0,
  65                         [1] = 4,
  66                 },
  67                 .md_phy_masks = {
  68                         /*
  69                          * Only channel 0 is populated in case of half-populated
  70                          * configuration.
  71                          */
  72                         .half_channel = BIT(0),
  73                         /* In mixed topologies, either channel 0 or 1 can be memory-down. */
  74                         .mixed_topo = BIT(0) | BIT(1),
  75                 },
  76         },
  77         [MEM_TYPE_LP4X] = {
  78                 .num_phys_channels = LPX_CHANNELS,
  79                 .phys_to_mrc_map = {
  80                         [0] = 0,
  81                         [1] = 1,
  82                         [2] = 2,
  83                         [3] = 3,
  84                         [4] = 4,
  85                         [5] = 5,
  86                         [6] = 6,
  87                         [7] = 7,
  88                 },
  89                 .md_phy_masks = {
  90                         /*
  91                          * Physical channels 0, 1, 2 and 3 are populated in case of
  92                          * half-populated configurations.
  93                          */
  94                         .half_channel = BIT(0) | BIT(1) | BIT(2) | BIT(3),
  95                         /* LP4x does not support mixed topologies. */
  96                 },
  97         },
  98         [MEM_TYPE_LP5X] = {
  99                 .num_phys_channels = LPX_CHANNELS,
 100                 .phys_to_mrc_map = {
 101                         [0] = 0,
 102                         [1] = 1,
 103                         [2] = 2,
 104                         [3] = 3,
 105                         [4] = 4,
 106                         [5] = 5,
 107                         [6] = 6,
 108                         [7] = 7,
 109                 },
 110                 .md_phy_masks = {
 111                         /*
 112                          * Physical channels 0, 1, 2 and 3 are populated in case of
 113                          * half-populated configurations.
 114                          */
 115                         .half_channel = BIT(0) | BIT(1) | BIT(2) | BIT(3),
 116                         /* LP5x does not support mixed topologies. */
 117                 },
 118         },
 119 };
 120
 121 static void mem_init_spd_upds(FSP_M_CONFIG *mem_cfg, const struct mem_channel_data *data)
 122 {
 123         uint32_t *spd_upds[MRC_CHANNELS][CONFIG_DIMMS_PER_CHANNEL] = {
 124                 [0] = { &mem_cfg->MemorySpdPtr000, &mem_cfg->MemorySpdPtr001, },
 125                 [1] = { &mem_cfg->MemorySpdPtr010, &mem_cfg->MemorySpdPtr011, },
 126                 [2] = { &mem_cfg->MemorySpdPtr020, &mem_cfg->MemorySpdPtr021, },
 127                 [3] = { &mem_cfg->MemorySpdPtr030, &mem_cfg->MemorySpdPtr031, },
 128                 [4] = { &mem_cfg->MemorySpdPtr100, &mem_cfg->MemorySpdPtr101, },
 129                 [5] = { &mem_cfg->MemorySpdPtr110, &mem_cfg->MemorySpdPtr111, },
 130                 [6] = { &mem_cfg->MemorySpdPtr120, &mem_cfg->MemorySpdPtr121, },
 131                 [7] = { &mem_cfg->MemorySpdPtr130, &mem_cfg->MemorySpdPtr131, },
 132         };
 133         uint8_t *disable_channel_upds[MRC_CHANNELS] = {
 134                 &mem_cfg->DisableMc0Ch0,
 135                 &mem_cfg->DisableMc0Ch1,
 136                 &mem_cfg->DisableMc0Ch2,
 137                 &mem_cfg->DisableMc0Ch3,
 138                 &mem_cfg->DisableMc1Ch0,
 139                 &mem_cfg->DisableMc1Ch1,
 140                 &mem_cfg->DisableMc1Ch2,
 141                 &mem_cfg->DisableMc1Ch3,
 142         };
 143         size_t ch, dimm;
 144
 145         mem_cfg->MemorySpdDataLen = data->spd_len;
 146
 147         for (ch = 0; ch < MRC_CHANNELS; ch++) {
 148                 uint8_t *disable_channel_ptr = disable_channel_upds[ch];
 149                 bool enable_channel = 0;
 150
 151                 for (dimm = 0; dimm < CONFIG_DIMMS_PER_CHANNEL; dimm++) {
 152                         uint32_t *spd_ptr = spd_upds[ch][dimm];
 153
 154                         *spd_ptr = data->spd[ch][dimm];
 155                         if (*spd_ptr)
 156                                 enable_channel = 1;
 157                 }
 158                 *disable_channel_ptr = !enable_channel;
 159         }
 160 }
 161
 162 static void mem_init_dq_dqs_upds(void *upds[MRC_CHANNELS], const void *map, size_t upd_size,
 163                                 const struct mem_channel_data *data, bool auto_detect)
 164 {
 165         size_t i;
 166
 167         for (i = 0; i < MRC_CHANNELS; i++, map += upd_size) {
 168                 if (auto_detect ||
 169                         !channel_is_populated(i, MRC_CHANNELS, data->ch_population_flags))
 170                         memset(upds[i], 0, upd_size);
 171                 else
 172                         memcpy(upds[i], map, upd_size);
 173         }
 174 }
 175
 176 static void mem_init_dq_upds(FSP_M_CONFIG *mem_cfg, const struct mem_channel_data *data,
 177                                 const struct mb_cfg *mb_cfg, bool auto_detect)
 178 {
 179         void *dq_upds[MRC_CHANNELS] = {
 180                 &mem_cfg->DqMapCpu2DramMc0Ch0,
 181                 &mem_cfg->DqMapCpu2DramMc0Ch1,
 182                 &mem_cfg->DqMapCpu2DramMc0Ch2,
 183                 &mem_cfg->DqMapCpu2DramMc0Ch3,
 184                 &mem_cfg->DqMapCpu2DramMc1Ch0,
 185                 &mem_cfg->DqMapCpu2DramMc1Ch1,
 186                 &mem_cfg->DqMapCpu2DramMc1Ch2,
 187                 &mem_cfg->DqMapCpu2DramMc1Ch3,
 188         };
 189
 190         const size_t upd_size = sizeof(mem_cfg->DqMapCpu2DramMc0Ch0);
 191
 192         _Static_assert(sizeof(mem_cfg->DqMapCpu2DramMc0Ch0) == CONFIG_MRC_CHANNEL_WIDTH,
 193                        "Incorrect DQ UPD size!");
 194
 195         mem_init_dq_dqs_upds(dq_upds, mb_cfg->dq_map, upd_size, data, auto_detect);
 196 }
 197
 198 static void mem_init_dqs_upds(FSP_M_CONFIG *mem_cfg, const struct mem_channel_data *data,
 199                                 const struct mb_cfg *mb_cfg, bool auto_detect)
 200 {
 201         void *dqs_upds[MRC_CHANNELS] = {
 202                 &mem_cfg->DqsMapCpu2DramMc0Ch0,
 203                 &mem_cfg->DqsMapCpu2DramMc0Ch1,
 204                 &mem_cfg->DqsMapCpu2DramMc0Ch2,
 205                 &mem_cfg->DqsMapCpu2DramMc0Ch3,
 206                 &mem_cfg->DqsMapCpu2DramMc1Ch0,
 207                 &mem_cfg->DqsMapCpu2DramMc1Ch1,
 208                 &mem_cfg->DqsMapCpu2DramMc1Ch2,
 209                 &mem_cfg->DqsMapCpu2DramMc1Ch3,
 210         };
 211
 212         const size_t upd_size = sizeof(mem_cfg->DqsMapCpu2DramMc0Ch0);
 213
 214         _Static_assert(sizeof(mem_cfg->DqsMapCpu2DramMc0Ch0) == CONFIG_MRC_CHANNEL_WIDTH / 8,
 215                        "Incorrect DQS UPD size!");
 216
 217         mem_init_dq_dqs_upds(dqs_upds, mb_cfg->dqs_map, upd_size, data, auto_detect);
 218 }
 219
 220 #define DDR5_CH_DIMM_OFFSET(ch, dimm)        ((ch) * CONFIG_DIMMS_PER_CHANNEL + (dimm))
 221
 222 static void ddr5_fill_dimm_module_info(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *mb_cfg,
 223                                                  const struct mem_spd *spd_info)
 224 {
 225         for (size_t ch = 0; ch < soc_mem_cfg[MEM_TYPE_DDR5].num_phys_channels; ch++) {
 226                 for (size_t dimm = 0; dimm < CONFIG_DIMMS_PER_CHANNEL; dimm++) {
 227                         size_t mrc_ch = soc_mem_cfg[MEM_TYPE_DDR5].phys_to_mrc_map[ch];
 228                         mem_cfg->SpdAddressTable[DDR5_CH_DIMM_OFFSET(mrc_ch, dimm)] =
 229                                 spd_info->smbus[ch].addr_dimm[dimm] << 1;
 230                 }
 231         }
 232         mem_init_dq_upds(mem_cfg, NULL, mb_cfg, true);
 233         mem_init_dqs_upds(mem_cfg, NULL, mb_cfg, true);
 234 }
 235
 236 void memcfg_init(FSPM_UPD *memupd, const struct mb_cfg *mb_cfg,
 237                  const struct mem_spd *spd_info, bool half_populated)
 238 {
 239         struct mem_channel_data data;
 240         bool dq_dqs_auto_detect = false;
 241         FSP_M_CONFIG *mem_cfg = &memupd->FspmConfig;
 242
 243 #if CONFIG(SOC_INTEL_RAPTORLAKE) && !CONFIG(FSP_USE_REPO)
 244         mem_cfg->CsPiStartHighinEct = mb_cfg->cs_pi_start_high_in_ect;
 245 #endif
 246         mem_cfg->ECT = mb_cfg->ect;
 247         mem_cfg->UserBd = mb_cfg->UserBd;
 248         set_rcomp_config(mem_cfg, mb_cfg);
 249
 250         /* Fill command mirror for memory */
 251         mem_cfg->CmdMirror = mb_cfg->CmdMirror;
 252
 253         /* Fill LpDdrrDqDqs Retraining for memory */
 254         mem_cfg->LpDdrDqDqsReTraining = mb_cfg->LpDdrDqDqsReTraining;
 255
 256         switch (mb_cfg->type) {
 257         case MEM_TYPE_DDR4:
 258                 meminit_ddr(mem_cfg, &mb_cfg->ddr_config);
 259                 dq_dqs_auto_detect = true;
 260                 break;
 261         case MEM_TYPE_DDR5:
 262                 meminit_ddr(mem_cfg, &mb_cfg->ddr_config);
 263                 dq_dqs_auto_detect = true;
 264                 /*
 265                 * TODO: Drop this workaround once SMBus driver in coreboot is updated to
 266                 * support DDR5 EEPROM reading.
 267                 */
 268                 if (spd_info->topo == MEM_TOPO_DIMM_MODULE) {
 269                         ddr5_fill_dimm_module_info(mem_cfg, mb_cfg, spd_info);
 270                         return;
 271                 }
 272                 break;
 273         case MEM_TYPE_LP4X:
 274                 meminit_lp4x(mem_cfg);
 275                 break;
 276         case MEM_TYPE_LP5X:
 277                 meminit_lp5x(mem_cfg, &mb_cfg->lp5x_config);
 278                 break;
 279         default:
 280                 die("Unsupported memory type(%d)\n", mb_cfg->type);
 281         }
 282
 283         mem_populate_channel_data(memupd, &soc_mem_cfg[mb_cfg->type], spd_info, half_populated,
 284                         &data);
 285         mem_init_spd_upds(mem_cfg, &data);
 286         mem_init_dq_upds(mem_cfg, &data, mb_cfg, dq_dqs_auto_detect);
 287         mem_init_dqs_upds(mem_cfg, &data, mb_cfg, dq_dqs_auto_detect);
 288 }