drivers/net/ethernet/tehuti/tehuti.c

   1 /*
   2  * Tehuti Networks(R) Network Driver
   3  * ethtool interface implementation
   4  * Copyright (C) 2007 Tehuti Networks Ltd. All rights reserved
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  */
  11
  12 /*
  13  * RX HW/SW interaction overview
  14  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  15  * There are 2 types of RX communication channels between driver and NIC.
  16  * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
  17  * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
  18  * info about buffer's location, size and ID. An ID field is used to identify a
  19  * buffer when it's returned with data via RXD Fifo (see below)
  20  * 2) RX Data Fifo - RXD - holds descriptors of full buffers. This Fifo is
  21  * filled by HW and is readen by SW. Each descriptor holds status and ID.
  22  * HW pops descriptor from RXF Fifo, stores ID, fills buffer with incoming data,
  23  * via dma moves it into host memory, builds new RXD descriptor with same ID,
  24  * pushes it into RXD Fifo and raises interrupt to indicate new RX data.
  25  *
  26  * Current NIC configuration (registers + firmware) makes NIC use 2 RXF Fifos.
  27  * One holds 1.5K packets and another - 26K packets. Depending on incoming
  28  * packet size, HW desides on a RXF Fifo to pop buffer from. When packet is
  29  * filled with data, HW builds new RXD descriptor for it and push it into single
  30  * RXD Fifo.
  31  *
  32  * RX SW Data Structures
  33  * ~~~~~~~~~~~~~~~~~~~~~
  34  * skb db - used to keep track of all skbs owned by SW and their dma addresses.
  35  * For RX case, ownership lasts from allocating new empty skb for RXF until
  36  * accepting full skb from RXD and passing it to OS. Each RXF Fifo has its own
  37  * skb db. Implemented as array with bitmask.
  38  * fifo - keeps info about fifo's size and location, relevant HW registers,
  39  * usage and skb db. Each RXD and RXF Fifo has its own fifo structure.
  40  * Implemented as simple struct.
  41  *
  42  * RX SW Execution Flow
  43  * ~~~~~~~~~~~~~~~~~~~~
  44  * Upon initialization (ifconfig up) driver creates RX fifos and initializes
  45  * relevant registers. At the end of init phase, driver enables interrupts.
  46  * NIC sees that there is no RXF buffers and raises
  47  * RD_INTR interrupt, isr fills skbs and Rx begins.
  48  * Driver has two receive operation modes:
  49  *    NAPI - interrupt-driven mixed with polling
  50  *    interrupt-driven only
  51  *
  52  * Interrupt-driven only flow is following. When buffer is ready, HW raises
  53  * interrupt and isr is called. isr collects all available packets
  54  * (bdx_rx_receive), refills skbs (bdx_rx_alloc_skbs) and exit.
  55
  56  * Rx buffer allocation note
  57  * ~~~~~~~~~~~~~~~~~~~~~~~~~
  58  * Driver cares to feed such amount of RxF descriptors that respective amount of
  59  * RxD descriptors can not fill entire RxD fifo. The main reason is lack of
  60  * overflow check in Bordeaux for RxD fifo free/used size.
  61  * FIXME: this is NOT fully implemented, more work should be done
  62  *
  63  */
  64
  65 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  66
  67 #include "tehuti.h"
  68
  69 static const struct pci_device_id bdx_pci_tbl[] = {
  70         { PCI_VDEVICE(TEHUTI, 0x3009), },
  71         { PCI_VDEVICE(TEHUTI, 0x3010), },
  72         { PCI_VDEVICE(TEHUTI, 0x3014), },
  73         { 0 }
  74 };
  75
  76 MODULE_DEVICE_TABLE(pci, bdx_pci_tbl);
  77
  78 /* Definitions needed by ISR or NAPI functions */
  79 static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f);
  80 static void bdx_tx_cleanup(struct bdx_priv *priv);
  81 static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget);
  82
  83 /* Definitions needed by FW loading */
  84 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size);
  85
  86 /* Definitions needed by hw_start */
  87 static int bdx_tx_init(struct bdx_priv *priv);
  88 static int bdx_rx_init(struct bdx_priv *priv);
  89
  90 /* Definitions needed by bdx_close */
  91 static void bdx_rx_free(struct bdx_priv *priv);
  92 static void bdx_tx_free(struct bdx_priv *priv);
  93
  94 /* Definitions needed by bdx_probe */
  95 static void bdx_set_ethtool_ops(struct net_device *netdev);
  96
  97 /*************************************************************************
  98  *    Print Info                                                         *
  99  *************************************************************************/
 100
 101 static void print_hw_id(struct pci_dev *pdev)
 102 {
 103         struct pci_nic *nic = pci_get_drvdata(pdev);
 104         u16 pci_link_status = 0;
 105         u16 pci_ctrl = 0;
 106
 107         pci_read_config_word(pdev, PCI_LINK_STATUS_REG, &pci_link_status);
 108         pci_read_config_word(pdev, PCI_DEV_CTRL_REG, &pci_ctrl);
 109
 110         pr_info("%s%s\n", BDX_NIC_NAME,
 111                 nic->port_num == 1 ? "" : ", 2-Port");
 112         pr_info("srom 0x%x fpga %d build %u lane# %d max_pl 0x%x mrrs 0x%x\n",
 113                 readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF,
 114                 readl(nic->regs + FPGA_SEED),
 115                 GET_LINK_STATUS_LANES(pci_link_status),
 116                 GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl));
 117 }
 118
 119 static void print_fw_id(struct pci_nic *nic)
 120 {
 121         pr_info("fw 0x%x\n", readl(nic->regs + FW_VER));
 122 }
 123
 124 static void print_eth_id(struct net_device *ndev)
 125 {
 126         netdev_info(ndev, "%s, Port %c\n",
 127                     BDX_NIC_NAME, (ndev->if_port == 0) ? 'A' : 'B');
 128
 129 }
 130
 131 /*************************************************************************
 132  *    Code                                                               *
 133  *************************************************************************/
 134
 135 #define bdx_enable_interrupts(priv)     \
 136         do { WRITE_REG(priv, regIMR, IR_RUN); } while (0)
 137 #define bdx_disable_interrupts(priv)    \
 138         do { WRITE_REG(priv, regIMR, 0); } while (0)
 139
 140 /**
 141  * bdx_fifo_init - create TX/RX descriptor fifo for host-NIC communication.
 142  * @priv: NIC private structure
 143  * @f: fifo to initialize
 144  * @fsz_type: fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB
 145  * @reg_XXX: offsets of registers relative to base address
 146  *
 147  * 1K extra space is allocated at the end of the fifo to simplify
 148  * processing of descriptors that wraps around fifo's end
 149  *
 150  * Returns 0 on success, negative value on failure
 151  *
 152  */
 153 static int
 154 bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type,
 155               u16 reg_CFG0, u16 reg_CFG1, u16 reg_RPTR, u16 reg_WPTR)
 156 {
 157         u16 memsz = FIFO_SIZE * (1 << fsz_type);
 158
 159         memset(f, 0, sizeof(struct fifo));
 160         /* pci_alloc_consistent gives us 4k-aligned memory */
 161         f->va = pci_alloc_consistent(priv->pdev,
 162                                      memsz + FIFO_EXTRA_SPACE, &f->da);
 163         if (!f->va) {
 164                 pr_err("pci_alloc_consistent failed\n");
 165                 RET(-ENOMEM);
 166         }
 167         f->reg_CFG0 = reg_CFG0;
 168         f->reg_CFG1 = reg_CFG1;
 169         f->reg_RPTR = reg_RPTR;
 170         f->reg_WPTR = reg_WPTR;
 171         f->rptr = 0;
 172         f->wptr = 0;
 173         f->memsz = memsz;
 174         f->size_mask = memsz - 1;
 175         WRITE_REG(priv, reg_CFG0, (u32) ((f->da & TX_RX_CFG0_BASE) | fsz_type));
 176         WRITE_REG(priv, reg_CFG1, H32_64(f->da));
 177
 178         RET(0);
 179 }
 180
 181 /**
 182  * bdx_fifo_free - free all resources used by fifo
 183  * @priv: NIC private structure
 184  * @f: fifo to release
 185  */
 186 static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f)
 187 {
 188         ENTER;
 189         if (f->va) {
 190                 pci_free_consistent(priv->pdev,
 191                                     f->memsz + FIFO_EXTRA_SPACE, f->va, f->da);
 192                 f->va = NULL;
 193         }
 194         RET();
 195 }
 196
 197 /**
 198  * bdx_link_changed - notifies OS about hw link state.
 199  * @priv: hw adapter structure
 200  */
 201 static void bdx_link_changed(struct bdx_priv *priv)
 202 {
 203         u32 link = READ_REG(priv, regMAC_LNK_STAT) & MAC_LINK_STAT;
 204
 205         if (!link) {
 206                 if (netif_carrier_ok(priv->ndev)) {
 207                         netif_stop_queue(priv->ndev);
 208                         netif_carrier_off(priv->ndev);
 209                         netdev_err(priv->ndev, "Link Down\n");
 210                 }
 211         } else {
 212                 if (!netif_carrier_ok(priv->ndev)) {
 213                         netif_wake_queue(priv->ndev);
 214                         netif_carrier_on(priv->ndev);
 215                         netdev_err(priv->ndev, "Link Up\n");
 216                 }
 217         }
 218 }
 219
 220 static void bdx_isr_extra(struct bdx_priv *priv, u32 isr)
 221 {
 222         if (isr & IR_RX_FREE_0) {
 223                 bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
 224                 DBG("RX_FREE_0\n");
 225         }
 226
 227         if (isr & IR_LNKCHG0)
 228                 bdx_link_changed(priv);
 229
 230         if (isr & IR_PCIE_LINK)
 231                 netdev_err(priv->ndev, "PCI-E Link Fault\n");
 232
 233         if (isr & IR_PCIE_TOUT)
 234                 netdev_err(priv->ndev, "PCI-E Time Out\n");
 235
 236 }
 237
 238 /**
 239  * bdx_isr_napi - Interrupt Service Routine for Bordeaux NIC
 240  * @irq: interrupt number
 241  * @dev: network device
 242  *
 243  * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise
 244  *
 245  * It reads ISR register to know interrupt reasons, and proceed them one by one.
 246  * Reasons of interest are:
 247  *    RX_DESC - new packet has arrived and RXD fifo holds its descriptor
 248  *    RX_FREE - number of free Rx buffers in RXF fifo gets low
 249  *    TX_FREE - packet was transmited and RXF fifo holds its descriptor
 250  */
 251
 252 static irqreturn_t bdx_isr_napi(int irq, void *dev)
 253 {
 254         struct net_device *ndev = dev;
 255         struct bdx_priv *priv = netdev_priv(ndev);
 256         u32 isr;
 257
 258         ENTER;
 259         isr = (READ_REG(priv, regISR) & IR_RUN);
 260         if (unlikely(!isr)) {
 261                 bdx_enable_interrupts(priv);
 262                 return IRQ_NONE;        /* Not our interrupt */
 263         }
 264
 265         if (isr & IR_EXTRA)
 266                 bdx_isr_extra(priv, isr);
 267
 268         if (isr & (IR_RX_DESC_0 | IR_TX_FREE_0)) {
 269                 if (likely(napi_schedule_prep(&priv->napi))) {
 270                         __napi_schedule(&priv->napi);
 271                         RET(IRQ_HANDLED);
 272                 } else {
 273                         /* NOTE: we get here if intr has slipped into window
 274                          * between these lines in bdx_poll:
 275                          *    bdx_enable_interrupts(priv);
 276                          *    return 0;
 277                          * currently intrs are disabled (since we read ISR),
 278                          * and we have failed to register next poll.
 279                          * so we read the regs to trigger chip
 280                          * and allow further interupts. */
 281                         READ_REG(priv, regTXF_WPTR_0);
 282                         READ_REG(priv, regRXD_WPTR_0);
 283                 }
 284         }
 285
 286         bdx_enable_interrupts(priv);
 287         RET(IRQ_HANDLED);
 288 }
 289
 290 static int bdx_poll(struct napi_struct *napi, int budget)
 291 {
 292         struct bdx_priv *priv = container_of(napi, struct bdx_priv, napi);
 293         int work_done;
 294
 295         ENTER;
 296         bdx_tx_cleanup(priv);
 297         work_done = bdx_rx_receive(priv, &priv->rxd_fifo0, budget);
 298         if ((work_done < budget) ||
 299             (priv->napi_stop++ >= 30)) {
 300                 DBG("rx poll is done. backing to isr-driven\n");
 301
 302                 /* from time to time we exit to let NAPI layer release
 303                  * device lock and allow waiting tasks (eg rmmod) to advance) */
 304                 priv->napi_stop = 0;
 305
 306                 napi_complete_done(napi, work_done);
 307                 bdx_enable_interrupts(priv);
 308         }
 309         return work_done;
 310 }
 311
 312 /**
 313  * bdx_fw_load - loads firmware to NIC
 314  * @priv: NIC private structure
 315  *
 316  * Firmware is loaded via TXD fifo, so it must be initialized first.
 317  * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC
 318  * can have few of them). So all drivers use semaphore register to choose one
 319  * that will actually load FW to NIC.
 320  */
 321
 322 static int bdx_fw_load(struct bdx_priv *priv)
 323 {
 324         const struct firmware *fw = NULL;
 325         int master, i;
 326         int rc;
 327
 328         ENTER;
 329         master = READ_REG(priv, regINIT_SEMAPHORE);
 330         if (!READ_REG(priv, regINIT_STATUS) && master) {
 331                 rc = request_firmware(&fw, "tehuti/bdx.bin", &priv->pdev->dev);
 332                 if (rc)
 333                         goto out;
 334                 bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size);
 335                 mdelay(100);
 336         }
 337         for (i = 0; i < 200; i++) {
 338                 if (READ_REG(priv, regINIT_STATUS)) {
 339                         rc = 0;
 340                         goto out;
 341                 }
 342                 mdelay(2);
 343         }
 344         rc = -EIO;
 345 out:
 346         if (master)
 347                 WRITE_REG(priv, regINIT_SEMAPHORE, 1);
 348
 349         release_firmware(fw);
 350
 351         if (rc) {
 352                 netdev_err(priv->ndev, "firmware loading failed\n");
 353                 if (rc == -EIO)
 354                         DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
 355                             READ_REG(priv, regVPC),
 356                             READ_REG(priv, regVIC),
 357                             READ_REG(priv, regINIT_STATUS), i);
 358                 RET(rc);
 359         } else {
 360                 DBG("%s: firmware loading success\n", priv->ndev->name);
 361                 RET(0);
 362         }
 363 }
 364
 365 static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv)
 366 {
 367         u32 val;
 368
 369         ENTER;
 370         DBG("mac0=%x mac1=%x mac2=%x\n",
 371             READ_REG(priv, regUNC_MAC0_A),
 372             READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A));
 373
 374         val = (ndev->dev_addr[0] << 8) | (ndev->dev_addr[1]);
 375         WRITE_REG(priv, regUNC_MAC2_A, val);
 376         val = (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]);
 377         WRITE_REG(priv, regUNC_MAC1_A, val);
 378         val = (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]);
 379         WRITE_REG(priv, regUNC_MAC0_A, val);
 380
 381         DBG("mac0=%x mac1=%x mac2=%x\n",
 382             READ_REG(priv, regUNC_MAC0_A),
 383             READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A));
 384         RET();
 385 }
 386
 387 /**
 388  * bdx_hw_start - inits registers and starts HW's Rx and Tx engines
 389  * @priv: NIC private structure
 390  */
 391 static int bdx_hw_start(struct bdx_priv *priv)
 392 {
 393         int rc = -EIO;
 394         struct net_device *ndev = priv->ndev;
 395
 396         ENTER;
 397         bdx_link_changed(priv);
 398
 399         /* 10G overall max length (vlan, eth&ip header, ip payload, crc) */
 400         WRITE_REG(priv, regFRM_LENGTH, 0X3FE0);
 401         WRITE_REG(priv, regPAUSE_QUANT, 0x96);
 402         WRITE_REG(priv, regRX_FIFO_SECTION, 0x800010);
 403         WRITE_REG(priv, regTX_FIFO_SECTION, 0xE00010);
 404         WRITE_REG(priv, regRX_FULLNESS, 0);
 405         WRITE_REG(priv, regTX_FULLNESS, 0);
 406         WRITE_REG(priv, regCTRLST,
 407                   regCTRLST_BASE | regCTRLST_RX_ENA | regCTRLST_TX_ENA);
 408
 409         WRITE_REG(priv, regVGLB, 0);
 410         WRITE_REG(priv, regMAX_FRAME_A,
 411                   priv->rxf_fifo0.m.pktsz & MAX_FRAME_AB_VAL);
 412
 413         DBG("RDINTCM=%08x\n", priv->rdintcm);   /*NOTE: test script uses this */
 414         WRITE_REG(priv, regRDINTCM0, priv->rdintcm);
 415         WRITE_REG(priv, regRDINTCM2, 0);        /*cpu_to_le32(rcm.val)); */
 416
 417         DBG("TDINTCM=%08x\n", priv->tdintcm);   /*NOTE: test script uses this */
 418         WRITE_REG(priv, regTDINTCM0, priv->tdintcm);    /* old val = 0x300064 */
 419
 420         /* Enable timer interrupt once in 2 secs. */
 421         /*WRITE_REG(priv, regGTMR0, ((GTMR_SEC * 2) & GTMR_DATA)); */
 422         bdx_restore_mac(priv->ndev, priv);
 423
 424         WRITE_REG(priv, regGMAC_RXF_A, GMAC_RX_FILTER_OSEN |
 425                   GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB);
 426
 427 #define BDX_IRQ_TYPE    ((priv->nic->irq_type == IRQ_MSI) ? 0 : IRQF_SHARED)
 428
 429         rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE,
 430                          ndev->name, ndev);
 431         if (rc)
 432                 goto err_irq;
 433         bdx_enable_interrupts(priv);
 434
 435         RET(0);
 436
 437 err_irq:
 438         RET(rc);
 439 }
 440
 441 static void bdx_hw_stop(struct bdx_priv *priv)
 442 {
 443         ENTER;
 444         bdx_disable_interrupts(priv);
 445         free_irq(priv->pdev->irq, priv->ndev);
 446
 447         netif_carrier_off(priv->ndev);
 448         netif_stop_queue(priv->ndev);
 449
 450         RET();
 451 }
 452
 453 static int bdx_hw_reset_direct(void __iomem *regs)
 454 {
 455         u32 val, i;
 456         ENTER;
 457
 458         /* reset sequences: read, write 1, read, write 0 */
 459         val = readl(regs + regCLKPLL);
 460         writel((val | CLKPLL_SFTRST) + 0x8, regs + regCLKPLL);
 461         udelay(50);
 462         val = readl(regs + regCLKPLL);
 463         writel(val & ~CLKPLL_SFTRST, regs + regCLKPLL);
 464
 465         /* check that the PLLs are locked and reset ended */
 466         for (i = 0; i < 70; i++, mdelay(10))
 467                 if ((readl(regs + regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) {
 468                         /* do any PCI-E read transaction */
 469                         readl(regs + regRXD_CFG0_0);
 470                         return 0;
 471                 }
 472         pr_err("HW reset failed\n");
 473         return 1;               /* failure */
 474 }
 475
 476 static int bdx_hw_reset(struct bdx_priv *priv)
 477 {
 478         u32 val, i;
 479         ENTER;
 480
 481         if (priv->port == 0) {
 482                 /* reset sequences: read, write 1, read, write 0 */
 483                 val = READ_REG(priv, regCLKPLL);
 484                 WRITE_REG(priv, regCLKPLL, (val | CLKPLL_SFTRST) + 0x8);
 485                 udelay(50);
 486                 val = READ_REG(priv, regCLKPLL);
 487                 WRITE_REG(priv, regCLKPLL, val & ~CLKPLL_SFTRST);
 488         }
 489         /* check that the PLLs are locked and reset ended */
 490         for (i = 0; i < 70; i++, mdelay(10))
 491                 if ((READ_REG(priv, regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) {
 492                         /* do any PCI-E read transaction */
 493                         READ_REG(priv, regRXD_CFG0_0);
 494                         return 0;
 495                 }
 496         pr_err("HW reset failed\n");
 497         return 1;               /* failure */
 498 }
 499
 500 static int bdx_sw_reset(struct bdx_priv *priv)
 501 {
 502         int i;
 503
 504         ENTER;
 505         /* 1. load MAC (obsolete) */
 506         /* 2. disable Rx (and Tx) */
 507         WRITE_REG(priv, regGMAC_RXF_A, 0);
 508         mdelay(100);
 509         /* 3. disable port */
 510         WRITE_REG(priv, regDIS_PORT, 1);
 511         /* 4. disable queue */
 512         WRITE_REG(priv, regDIS_QU, 1);
 513         /* 5. wait until hw is disabled */
 514         for (i = 0; i < 50; i++) {
 515                 if (READ_REG(priv, regRST_PORT) & 1)
 516                         break;
 517                 mdelay(10);
 518         }
 519         if (i == 50)
 520                 netdev_err(priv->ndev, "SW reset timeout. continuing anyway\n");
 521
 522         /* 6. disable intrs */
 523         WRITE_REG(priv, regRDINTCM0, 0);
 524         WRITE_REG(priv, regTDINTCM0, 0);
 525         WRITE_REG(priv, regIMR, 0);
 526         READ_REG(priv, regISR);
 527
 528         /* 7. reset queue */
 529         WRITE_REG(priv, regRST_QU, 1);
 530         /* 8. reset port */
 531         WRITE_REG(priv, regRST_PORT, 1);
 532         /* 9. zero all read and write pointers */
 533         for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
 534                 DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR);
 535         for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
 536                 WRITE_REG(priv, i, 0);
 537         /* 10. unseet port disable */
 538         WRITE_REG(priv, regDIS_PORT, 0);
 539         /* 11. unset queue disable */
 540         WRITE_REG(priv, regDIS_QU, 0);
 541         /* 12. unset queue reset */
 542         WRITE_REG(priv, regRST_QU, 0);
 543         /* 13. unset port reset */
 544         WRITE_REG(priv, regRST_PORT, 0);
 545         /* 14. enable Rx */
 546         /* skiped. will be done later */
 547         /* 15. save MAC (obsolete) */
 548         for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
 549                 DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR);
 550
 551         RET(0);
 552 }
 553
 554 /* bdx_reset - performs right type of reset depending on hw type */
 555 static int bdx_reset(struct bdx_priv *priv)
 556 {
 557         ENTER;
 558         RET((priv->pdev->device == 0x3009)
 559             ? bdx_hw_reset(priv)
 560             : bdx_sw_reset(priv));
 561 }
 562
 563 /**
 564  * bdx_close - Disables a network interface
 565  * @netdev: network interface device structure
 566  *
 567  * Returns 0, this is not allowed to fail
 568  *
 569  * The close entry point is called when an interface is de-activated
 570  * by the OS.  The hardware is still under the drivers control, but
 571  * needs to be disabled.  A global MAC reset is issued to stop the
 572  * hardware, and all transmit and receive resources are freed.
 573  **/
 574 static int bdx_close(struct net_device *ndev)
 575 {
 576         struct bdx_priv *priv = NULL;
 577
 578         ENTER;
 579         priv = netdev_priv(ndev);
 580
 581         napi_disable(&priv->napi);
 582
 583         bdx_reset(priv);
 584         bdx_hw_stop(priv);
 585         bdx_rx_free(priv);
 586         bdx_tx_free(priv);
 587         RET(0);
 588 }
 589
 590 /**
 591  * bdx_open - Called when a network interface is made active
 592  * @netdev: network interface device structure
 593  *
 594  * Returns 0 on success, negative value on failure
 595  *
 596  * The open entry point is called when a network interface is made
 597  * active by the system (IFF_UP).  At this point all resources needed
 598  * for transmit and receive operations are allocated, the interrupt
 599  * handler is registered with the OS, the watchdog timer is started,
 600  * and the stack is notified that the interface is ready.
 601  **/
 602 static int bdx_open(struct net_device *ndev)
 603 {
 604         struct bdx_priv *priv;
 605         int rc;
 606
 607         ENTER;
 608         priv = netdev_priv(ndev);
 609         bdx_reset(priv);
 610         if (netif_running(ndev))
 611                 netif_stop_queue(priv->ndev);
 612
 613         if ((rc = bdx_tx_init(priv)) ||
 614             (rc = bdx_rx_init(priv)) ||
 615             (rc = bdx_fw_load(priv)))
 616                 goto err;
 617
 618         bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
 619
 620         rc = bdx_hw_start(priv);
 621         if (rc)
 622                 goto err;
 623
 624         napi_enable(&priv->napi);
 625
 626         print_fw_id(priv->nic);
 627
 628         RET(0);
 629
 630 err:
 631         bdx_close(ndev);
 632         RET(rc);
 633 }
 634
 635 static int bdx_range_check(struct bdx_priv *priv, u32 offset)
 636 {
 637         return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ?
 638                 -EINVAL : 0;
 639 }
 640
 641 static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 642 {
 643         struct bdx_priv *priv = netdev_priv(ndev);
 644         u32 data[3];
 645         int error;
 646
 647         ENTER;
 648
 649         DBG("jiffies=%ld cmd=%d\n", jiffies, cmd);
 650         if (cmd != SIOCDEVPRIVATE) {
 651                 error = copy_from_user(data, ifr->ifr_data, sizeof(data));
 652                 if (error) {
 653                         pr_err("can't copy from user\n");
 654                         RET(-EFAULT);
 655                 }
 656                 DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
 657         } else {
 658                 return -EOPNOTSUPP;
 659         }
 660
 661         if (!capable(CAP_SYS_RAWIO))
 662                 return -EPERM;
 663
 664         switch (data[0]) {
 665
 666         case BDX_OP_READ:
 667                 error = bdx_range_check(priv, data[1]);
 668                 if (error < 0)
 669                         return error;
 670                 data[2] = READ_REG(priv, data[1]);
 671                 DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2],
 672                     data[2]);
 673                 error = copy_to_user(ifr->ifr_data, data, sizeof(data));
 674                 if (error)
 675                         RET(-EFAULT);
 676                 break;
 677
 678         case BDX_OP_WRITE:
 679                 error = bdx_range_check(priv, data[1]);
 680                 if (error < 0)
 681                         return error;
 682                 WRITE_REG(priv, data[1], data[2]);
 683                 DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]);
 684                 break;
 685
 686         default:
 687                 RET(-EOPNOTSUPP);
 688         }
 689         return 0;
 690 }
 691
 692 static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
 693 {
 694         ENTER;
 695         if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15))
 696                 RET(bdx_ioctl_priv(ndev, ifr, cmd));
 697         else
 698                 RET(-EOPNOTSUPP);
 699 }
 700
 701 /**
 702  * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid
 703  * @ndev: network device
 704  * @vid:  VLAN vid
 705  * @op:   add or kill operation
 706  *
 707  * Passes VLAN filter table to hardware
 708  */
 709 static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable)
 710 {
 711         struct bdx_priv *priv = netdev_priv(ndev);
 712         u32 reg, bit, val;
 713
 714         ENTER;
 715         DBG2("vid=%d value=%d\n", (int)vid, enable);
 716         if (unlikely(vid >= 4096)) {
 717                 pr_err("invalid VID: %u (> 4096)\n", vid);
 718                 RET();
 719         }
 720         reg = regVLAN_0 + (vid / 32) * 4;
 721         bit = 1 << vid % 32;
 722         val = READ_REG(priv, reg);
 723         DBG2("reg=%x, val=%x, bit=%d\n", reg, val, bit);
 724         if (enable)
 725                 val |= bit;
 726         else
 727                 val &= ~bit;
 728         DBG2("new val %x\n", val);
 729         WRITE_REG(priv, reg, val);
 730         RET();
 731 }
 732
 733 /**
 734  * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table
 735  * @ndev: network device
 736  * @vid:  VLAN vid to add
 737  */
 738 static int bdx_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
 739 {
 740         __bdx_vlan_rx_vid(ndev, vid, 1);
 741         return 0;
 742 }
 743
 744 /**
 745  * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table
 746  * @ndev: network device
 747  * @vid:  VLAN vid to kill
 748  */
 749 static int bdx_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
 750 {
 751         __bdx_vlan_rx_vid(ndev, vid, 0);
 752         return 0;
 753 }
 754
 755 /**
 756  * bdx_change_mtu - Change the Maximum Transfer Unit
 757  * @netdev: network interface device structure
 758  * @new_mtu: new value for maximum frame size
 759  *
 760  * Returns 0 on success, negative on failure
 761  */
 762 static int bdx_change_mtu(struct net_device *ndev, int new_mtu)
 763 {
 764         ENTER;
 765
 766         ndev->mtu = new_mtu;
 767         if (netif_running(ndev)) {
 768                 bdx_close(ndev);
 769                 bdx_open(ndev);
 770         }
 771         RET(0);
 772 }
 773
 774 static void bdx_setmulti(struct net_device *ndev)
 775 {
 776         struct bdx_priv *priv = netdev_priv(ndev);
 777
 778         u32 rxf_val =
 779             GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB | GMAC_RX_FILTER_OSEN;
 780         int i;
 781
 782         ENTER;
 783         /* IMF - imperfect (hash) rx multicat filter */
 784         /* PMF - perfect rx multicat filter */
 785
 786         /* FIXME: RXE(OFF) */
 787         if (ndev->flags & IFF_PROMISC) {
 788                 rxf_val |= GMAC_RX_FILTER_PRM;
 789         } else if (ndev->flags & IFF_ALLMULTI) {
 790                 /* set IMF to accept all multicast frmaes */
 791                 for (i = 0; i < MAC_MCST_HASH_NUM; i++)
 792                         WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, ~0);
 793         } else if (!netdev_mc_empty(ndev)) {
 794                 u8 hash;
 795                 struct netdev_hw_addr *ha;
 796                 u32 reg, val;
 797
 798                 /* set IMF to deny all multicast frames */
 799                 for (i = 0; i < MAC_MCST_HASH_NUM; i++)
 800                         WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, 0);
 801                 /* set PMF to deny all multicast frames */
 802                 for (i = 0; i < MAC_MCST_NUM; i++) {
 803                         WRITE_REG(priv, regRX_MAC_MCST0 + i * 8, 0);
 804                         WRITE_REG(priv, regRX_MAC_MCST1 + i * 8, 0);
 805                 }
 806
 807                 /* use PMF to accept first MAC_MCST_NUM (15) addresses */
 808                 /* TBD: sort addresses and write them in ascending order
 809                  * into RX_MAC_MCST regs. we skip this phase now and accept ALL
 810                  * multicast frames throu IMF */
 811                 /* accept the rest of addresses throu IMF */
 812                 netdev_for_each_mc_addr(ha, ndev) {
 813                         hash = 0;
 814                         for (i = 0; i < ETH_ALEN; i++)
 815                                 hash ^= ha->addr[i];
 816                         reg = regRX_MCST_HASH0 + ((hash >> 5) << 2);
 817                         val = READ_REG(priv, reg);
 818                         val |= (1 << (hash % 32));
 819                         WRITE_REG(priv, reg, val);
 820                 }
 821
 822         } else {
 823                 DBG("only own mac %d\n", netdev_mc_count(ndev));
 824                 rxf_val |= GMAC_RX_FILTER_AB;
 825         }
 826         WRITE_REG(priv, regGMAC_RXF_A, rxf_val);
 827         /* enable RX */
 828         /* FIXME: RXE(ON) */
 829         RET();
 830 }
 831
 832 static int bdx_set_mac(struct net_device *ndev, void *p)
 833 {
 834         struct bdx_priv *priv = netdev_priv(ndev);
 835         struct sockaddr *addr = p;
 836
 837         ENTER;
 838         /*
 839            if (netif_running(dev))
 840            return -EBUSY
 841          */
 842         memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
 843         bdx_restore_mac(ndev, priv);
 844         RET(0);
 845 }
 846
 847 static int bdx_read_mac(struct bdx_priv *priv)
 848 {
 849         u16 macAddress[3], i;
 850         ENTER;
 851
 852         macAddress[2] = READ_REG(priv, regUNC_MAC0_A);
 853         macAddress[2] = READ_REG(priv, regUNC_MAC0_A);
 854         macAddress[1] = READ_REG(priv, regUNC_MAC1_A);
 855         macAddress[1] = READ_REG(priv, regUNC_MAC1_A);
 856         macAddress[0] = READ_REG(priv, regUNC_MAC2_A);
 857         macAddress[0] = READ_REG(priv, regUNC_MAC2_A);
 858         for (i = 0; i < 3; i++) {
 859                 priv->ndev->dev_addr[i * 2 + 1] = macAddress[i];
 860                 priv->ndev->dev_addr[i * 2] = macAddress[i] >> 8;
 861         }
 862         RET(0);
 863 }
 864
 865 static u64 bdx_read_l2stat(struct bdx_priv *priv, int reg)
 866 {
 867         u64 val;
 868
 869         val = READ_REG(priv, reg);
 870         val |= ((u64) READ_REG(priv, reg + 8)) << 32;
 871         return val;
 872 }
 873
 874 /*Do the statistics-update work*/
 875 static void bdx_update_stats(struct bdx_priv *priv)
 876 {
 877         struct bdx_stats *stats = &priv->hw_stats;
 878         u64 *stats_vector = (u64 *) stats;
 879         int i;
 880         int addr;
 881
 882         /*Fill HW structure */
 883         addr = 0x7200;
 884         /*First 12 statistics - 0x7200 - 0x72B0 */
 885         for (i = 0; i < 12; i++) {
 886                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 887                 addr += 0x10;
 888         }
 889         BDX_ASSERT(addr != 0x72C0);
 890         /* 0x72C0-0x72E0 RSRV */
 891         addr = 0x72F0;
 892         for (; i < 16; i++) {
 893                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 894                 addr += 0x10;
 895         }
 896         BDX_ASSERT(addr != 0x7330);
 897         /* 0x7330-0x7360 RSRV */
 898         addr = 0x7370;
 899         for (; i < 19; i++) {
 900                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 901                 addr += 0x10;
 902         }
 903         BDX_ASSERT(addr != 0x73A0);
 904         /* 0x73A0-0x73B0 RSRV */
 905         addr = 0x73C0;
 906         for (; i < 23; i++) {
 907                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 908                 addr += 0x10;
 909         }
 910         BDX_ASSERT(addr != 0x7400);
 911         BDX_ASSERT((sizeof(struct bdx_stats) / sizeof(u64)) != i);
 912 }
 913
 914 static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
 915                        u16 rxd_vlan);
 916 static void print_rxfd(struct rxf_desc *rxfd);
 917
 918 /*************************************************************************
 919  *     Rx DB                                                             *
 920  *************************************************************************/
 921
 922 static void bdx_rxdb_destroy(struct rxdb *db)
 923 {
 924         vfree(db);
 925 }
 926
 927 static struct rxdb *bdx_rxdb_create(int nelem)
 928 {
 929         struct rxdb *db;
 930         int i;
 931
 932         db = vmalloc(sizeof(struct rxdb)
 933                      + (nelem * sizeof(int))
 934                      + (nelem * sizeof(struct rx_map)));
 935         if (likely(db != NULL)) {
 936                 db->stack = (int *)(db + 1);
 937                 db->elems = (void *)(db->stack + nelem);
 938                 db->nelem = nelem;
 939                 db->top = nelem;
 940                 for (i = 0; i < nelem; i++)
 941                         db->stack[i] = nelem - i - 1;   /* to make first allocs
 942                                                            close to db struct*/
 943         }
 944
 945         return db;
 946 }
 947
 948 static inline int bdx_rxdb_alloc_elem(struct rxdb *db)
 949 {
 950         BDX_ASSERT(db->top <= 0);
 951         return db->stack[--(db->top)];
 952 }
 953
 954 static inline void *bdx_rxdb_addr_elem(struct rxdb *db, int n)
 955 {
 956         BDX_ASSERT((n < 0) || (n >= db->nelem));
 957         return db->elems + n;
 958 }
 959
 960 static inline int bdx_rxdb_available(struct rxdb *db)
 961 {
 962         return db->top;
 963 }
 964
 965 static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
 966 {
 967         BDX_ASSERT((n >= db->nelem) || (n < 0));
 968         db->stack[(db->top)++] = n;
 969 }
 970
 971 /*************************************************************************
 972  *     Rx Init                                                           *
 973  *************************************************************************/
 974
 975 /**
 976  * bdx_rx_init - initialize RX all related HW and SW resources
 977  * @priv: NIC private structure
 978  *
 979  * Returns 0 on success, negative value on failure
 980  *
 981  * It creates rxf and rxd fifos, update relevant HW registers, preallocate
 982  * skb for rx. It assumes that Rx is desabled in HW
 983  * funcs are grouped for better cache usage
 984  *
 985  * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
 986  * filled and packets will be dropped by nic without getting into host or
 987  * cousing interrupt. Anyway, in that condition, host has no chance to process
 988  * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
 989  */
 990
 991 /* TBD: ensure proper packet size */
 992
 993 static int bdx_rx_init(struct bdx_priv *priv)
 994 {
 995         ENTER;
 996
 997         if (bdx_fifo_init(priv, &priv->rxd_fifo0.m, priv->rxd_size,
 998                           regRXD_CFG0_0, regRXD_CFG1_0,
 999                           regRXD_RPTR_0, regRXD_WPTR_0))
1000                 goto err_mem;
1001         if (bdx_fifo_init(priv, &priv->rxf_fifo0.m, priv->rxf_size,
1002                           regRXF_CFG0_0, regRXF_CFG1_0,
1003                           regRXF_RPTR_0, regRXF_WPTR_0))
1004                 goto err_mem;
1005         priv->rxdb = bdx_rxdb_create(priv->rxf_fifo0.m.memsz /
1006                                      sizeof(struct rxf_desc));
1007         if (!priv->rxdb)
1008                 goto err_mem;
1009
1010         priv->rxf_fifo0.m.pktsz = priv->ndev->mtu + VLAN_ETH_HLEN;
1011         return 0;
1012
1013 err_mem:
1014         netdev_err(priv->ndev, "Rx init failed\n");
1015         return -ENOMEM;
1016 }
1017
1018 /**
1019  * bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo
1020  * @priv: NIC private structure
1021  * @f: RXF fifo
1022  */
1023 static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
1024 {
1025         struct rx_map *dm;
1026         struct rxdb *db = priv->rxdb;
1027         u16 i;
1028
1029         ENTER;
1030         DBG("total=%d free=%d busy=%d\n", db->nelem, bdx_rxdb_available(db),
1031             db->nelem - bdx_rxdb_available(db));
1032         while (bdx_rxdb_available(db) > 0) {
1033                 i = bdx_rxdb_alloc_elem(db);
1034                 dm = bdx_rxdb_addr_elem(db, i);
1035                 dm->dma = 0;
1036         }
1037         for (i = 0; i < db->nelem; i++) {
1038                 dm = bdx_rxdb_addr_elem(db, i);
1039                 if (dm->dma) {
1040                         pci_unmap_single(priv->pdev,
1041                                          dm->dma, f->m.pktsz,
1042                                          PCI_DMA_FROMDEVICE);
1043                         dev_kfree_skb(dm->skb);
1044                 }
1045         }
1046 }
1047
1048 /**
1049  * bdx_rx_free - release all Rx resources
1050  * @priv: NIC private structure
1051  *
1052  * It assumes that Rx is desabled in HW
1053  */
1054 static void bdx_rx_free(struct bdx_priv *priv)
1055 {
1056         ENTER;
1057         if (priv->rxdb) {
1058                 bdx_rx_free_skbs(priv, &priv->rxf_fifo0);
1059                 bdx_rxdb_destroy(priv->rxdb);
1060                 priv->rxdb = NULL;
1061         }
1062         bdx_fifo_free(priv, &priv->rxf_fifo0.m);
1063         bdx_fifo_free(priv, &priv->rxd_fifo0.m);
1064
1065         RET();
1066 }
1067
1068 /*************************************************************************
1069  *     Rx Engine                                                         *
1070  *************************************************************************/
1071
1072 /**
1073  * bdx_rx_alloc_skbs - fill rxf fifo with new skbs
1074  * @priv: nic's private structure
1075  * @f: RXF fifo that needs skbs
1076  *
1077  * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo.
1078  * skb's virtual and physical addresses are stored in skb db.
1079  * To calculate free space, func uses cached values of RPTR and WPTR
1080  * When needed, it also updates RPTR and WPTR.
1081  */
1082
1083 /* TBD: do not update WPTR if no desc were written */
1084
1085 static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
1086 {
1087         struct sk_buff *skb;
1088         struct rxf_desc *rxfd;
1089         struct rx_map *dm;
1090         int dno, delta, idx;
1091         struct rxdb *db = priv->rxdb;
1092
1093         ENTER;
1094         dno = bdx_rxdb_available(db) - 1;
1095         while (dno > 0) {
1096                 skb = netdev_alloc_skb(priv->ndev, f->m.pktsz + NET_IP_ALIGN);
1097                 if (!skb)
1098                         break;
1099
1100                 skb_reserve(skb, NET_IP_ALIGN);
1101
1102                 idx = bdx_rxdb_alloc_elem(db);
1103                 dm = bdx_rxdb_addr_elem(db, idx);
1104                 dm->dma = pci_map_single(priv->pdev,
1105                                          skb->data, f->m.pktsz,
1106                                          PCI_DMA_FROMDEVICE);
1107                 dm->skb = skb;
1108                 rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr);
1109                 rxfd->info = CPU_CHIP_SWAP32(0x10003);  /* INFO=1 BC=3 */
1110                 rxfd->va_lo = idx;
1111                 rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma));
1112                 rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma));
1113                 rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz);
1114                 print_rxfd(rxfd);
1115
1116                 f->m.wptr += sizeof(struct rxf_desc);
1117                 delta = f->m.wptr - f->m.memsz;
1118                 if (unlikely(delta >= 0)) {
1119                         f->m.wptr = delta;
1120                         if (delta > 0) {
1121                                 memcpy(f->m.va, f->m.va + f->m.memsz, delta);
1122                                 DBG("wrapped descriptor\n");
1123                         }
1124                 }
1125                 dno--;
1126         }
1127         /*TBD: to do - delayed rxf wptr like in txd */
1128         WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1129         RET();
1130 }
1131
1132 static inline void
1133 NETIF_RX_MUX(struct bdx_priv *priv, u32 rxd_val1, u16 rxd_vlan,
1134              struct sk_buff *skb)
1135 {
1136         ENTER;
1137         DBG("rxdd->flags.bits.vtag=%d\n", GET_RXD_VTAG(rxd_val1));
1138         if (GET_RXD_VTAG(rxd_val1)) {
1139                 DBG("%s: vlan rcv vlan '%x' vtag '%x'\n",
1140                     priv->ndev->name,
1141                     GET_RXD_VLAN_ID(rxd_vlan),
1142                     GET_RXD_VTAG(rxd_val1));
1143                 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), GET_RXD_VLAN_TCI(rxd_vlan));
1144         }
1145         netif_receive_skb(skb);
1146 }
1147
1148 static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
1149 {
1150         struct rxf_desc *rxfd;
1151         struct rx_map *dm;
1152         struct rxf_fifo *f;
1153         struct rxdb *db;
1154         struct sk_buff *skb;
1155         int delta;
1156
1157         ENTER;
1158         DBG("priv=%p rxdd=%p\n", priv, rxdd);
1159         f = &priv->rxf_fifo0;
1160         db = priv->rxdb;
1161         DBG("db=%p f=%p\n", db, f);
1162         dm = bdx_rxdb_addr_elem(db, rxdd->va_lo);
1163         DBG("dm=%p\n", dm);
1164         skb = dm->skb;
1165         rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr);
1166         rxfd->info = CPU_CHIP_SWAP32(0x10003);  /* INFO=1 BC=3 */
1167         rxfd->va_lo = rxdd->va_lo;
1168         rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma));
1169         rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma));
1170         rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz);
1171         print_rxfd(rxfd);
1172
1173         f->m.wptr += sizeof(struct rxf_desc);
1174         delta = f->m.wptr - f->m.memsz;
1175         if (unlikely(delta >= 0)) {
1176                 f->m.wptr = delta;
1177                 if (delta > 0) {
1178                         memcpy(f->m.va, f->m.va + f->m.memsz, delta);
1179                         DBG("wrapped descriptor\n");
1180                 }
1181         }
1182         RET();
1183 }
1184
1185 /**
1186  * bdx_rx_receive - receives full packets from RXD fifo and pass them to OS
1187  * NOTE: a special treatment is given to non-continuous descriptors
1188  * that start near the end, wraps around and continue at the beginning. a second
1189  * part is copied right after the first, and then descriptor is interpreted as
1190  * normal. fifo has an extra space to allow such operations
1191  * @priv: nic's private structure
1192  * @f: RXF fifo that needs skbs
1193  * @budget: maximum number of packets to receive
1194  */
1195
1196 /* TBD: replace memcpy func call by explicite inline asm */
1197
1198 static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget)
1199 {
1200         struct net_device *ndev = priv->ndev;
1201         struct sk_buff *skb, *skb2;
1202         struct rxd_desc *rxdd;
1203         struct rx_map *dm;
1204         struct rxf_fifo *rxf_fifo;
1205         int tmp_len, size;
1206         int done = 0;
1207         int max_done = BDX_MAX_RX_DONE;
1208         struct rxdb *db = NULL;
1209         /* Unmarshalled descriptor - copy of descriptor in host order */
1210         u32 rxd_val1;
1211         u16 len;
1212         u16 rxd_vlan;
1213
1214         ENTER;
1215         max_done = budget;
1216
1217         f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_WR_PTR;
1218
1219         size = f->m.wptr - f->m.rptr;
1220         if (size < 0)
1221                 size = f->m.memsz + size;       /* size is negative :-) */
1222
1223         while (size > 0) {
1224
1225                 rxdd = (struct rxd_desc *)(f->m.va + f->m.rptr);
1226                 rxd_val1 = CPU_CHIP_SWAP32(rxdd->rxd_val1);
1227
1228                 len = CPU_CHIP_SWAP16(rxdd->len);
1229
1230                 rxd_vlan = CPU_CHIP_SWAP16(rxdd->rxd_vlan);
1231
1232                 print_rxdd(rxdd, rxd_val1, len, rxd_vlan);
1233
1234                 tmp_len = GET_RXD_BC(rxd_val1) << 3;
1235                 BDX_ASSERT(tmp_len <= 0);
1236                 size -= tmp_len;
1237                 if (size < 0)   /* test for partially arrived descriptor */
1238                         break;
1239
1240                 f->m.rptr += tmp_len;
1241
1242                 tmp_len = f->m.rptr - f->m.memsz;
1243                 if (unlikely(tmp_len >= 0)) {
1244                         f->m.rptr = tmp_len;
1245                         if (tmp_len > 0) {
1246                                 DBG("wrapped desc rptr=%d tmp_len=%d\n",
1247                                     f->m.rptr, tmp_len);
1248                                 memcpy(f->m.va + f->m.memsz, f->m.va, tmp_len);
1249                         }
1250                 }
1251
1252                 if (unlikely(GET_RXD_ERR(rxd_val1))) {
1253                         DBG("rxd_err = 0x%x\n", GET_RXD_ERR(rxd_val1));
1254                         ndev->stats.rx_errors++;
1255                         bdx_recycle_skb(priv, rxdd);
1256                         continue;
1257                 }
1258
1259                 rxf_fifo = &priv->rxf_fifo0;
1260                 db = priv->rxdb;
1261                 dm = bdx_rxdb_addr_elem(db, rxdd->va_lo);
1262                 skb = dm->skb;
1263
1264                 if (len < BDX_COPYBREAK &&
1265                     (skb2 = netdev_alloc_skb(priv->ndev, len + NET_IP_ALIGN))) {
1266                         skb_reserve(skb2, NET_IP_ALIGN);
1267                         /*skb_put(skb2, len); */
1268                         pci_dma_sync_single_for_cpu(priv->pdev,
1269                                                     dm->dma, rxf_fifo->m.pktsz,
1270                                                     PCI_DMA_FROMDEVICE);
1271                         memcpy(skb2->data, skb->data, len);
1272                         bdx_recycle_skb(priv, rxdd);
1273                         skb = skb2;
1274                 } else {
1275                         pci_unmap_single(priv->pdev,
1276                                          dm->dma, rxf_fifo->m.pktsz,
1277                                          PCI_DMA_FROMDEVICE);
1278                         bdx_rxdb_free_elem(db, rxdd->va_lo);
1279                 }
1280
1281                 ndev->stats.rx_bytes += len;
1282
1283                 skb_put(skb, len);
1284                 skb->protocol = eth_type_trans(skb, ndev);
1285
1286                 /* Non-IP packets aren't checksum-offloaded */
1287                 if (GET_RXD_PKT_ID(rxd_val1) == 0)
1288                         skb_checksum_none_assert(skb);
1289                 else
1290                         skb->ip_summed = CHECKSUM_UNNECESSARY;
1291
1292                 NETIF_RX_MUX(priv, rxd_val1, rxd_vlan, skb);
1293
1294                 if (++done >= max_done)
1295                         break;
1296         }
1297
1298         ndev->stats.rx_packets += done;
1299
1300         /* FIXME: do smth to minimize pci accesses    */
1301         WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR);
1302
1303         bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
1304
1305         RET(done);
1306 }
1307
1308 /*************************************************************************
1309  * Debug / Temprorary Code                                               *
1310  *************************************************************************/
1311 static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
1312                        u16 rxd_vlan)
1313 {
1314         DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d va_lo %d va_hi %d\n",
1315             GET_RXD_BC(rxd_val1), GET_RXD_RXFQ(rxd_val1), GET_RXD_TO(rxd_val1),
1316             GET_RXD_TYPE(rxd_val1), GET_RXD_ERR(rxd_val1),
1317             GET_RXD_RXP(rxd_val1), GET_RXD_PKT_ID(rxd_val1),
1318             GET_RXD_VTAG(rxd_val1), len, GET_RXD_VLAN_ID(rxd_vlan),
1319             GET_RXD_CFI(rxd_vlan), GET_RXD_PRIO(rxd_vlan), rxdd->va_lo,
1320             rxdd->va_hi);
1321 }
1322
1323 static void print_rxfd(struct rxf_desc *rxfd)
1324 {
1325         DBG("=== RxF desc CHIP ORDER/ENDIANNESS =============\n"
1326             "info 0x%x va_lo %u pa_lo 0x%x pa_hi 0x%x len 0x%x\n",
1327             rxfd->info, rxfd->va_lo, rxfd->pa_lo, rxfd->pa_hi, rxfd->len);
1328 }
1329
1330 /*
1331  * TX HW/SW interaction overview
1332  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1333  * There are 2 types of TX communication channels between driver and NIC.
1334  * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
1335  * 2) TX Data Fifo - TXD - holds descriptors of full buffers.
1336  *
1337  * Currently NIC supports TSO, checksuming and gather DMA
1338  * UFO and IP fragmentation is on the way
1339  *
1340  * RX SW Data Structures
1341  * ~~~~~~~~~~~~~~~~~~~~~
1342  * txdb - used to keep track of all skbs owned by SW and their dma addresses.
1343  * For TX case, ownership lasts from geting packet via hard_xmit and until HW
1344  * acknowledges sent by TXF descriptors.
1345  * Implemented as cyclic buffer.
1346  * fifo - keeps info about fifo's size and location, relevant HW registers,
1347  * usage and skb db. Each RXD and RXF Fifo has its own fifo structure.
1348  * Implemented as simple struct.
1349  *
1350  * TX SW Execution Flow
1351  * ~~~~~~~~~~~~~~~~~~~~
1352  * OS calls driver's hard_xmit method with packet to sent.
1353  * Driver creates DMA mappings, builds TXD descriptors and kicks HW
1354  * by updating TXD WPTR.
1355  * When packet is sent, HW write us TXF descriptor and SW frees original skb.
1356  * To prevent TXD fifo overflow without reading HW registers every time,
1357  * SW deploys "tx level" technique.
1358  * Upon strart up, tx level is initialized to TXD fifo length.
1359  * For every sent packet, SW gets its TXD descriptor sizei
1360  * (from precalculated array) and substructs it from tx level.
1361  * The size is also stored in txdb. When TXF ack arrives, SW fetch size of
1362  * original TXD descriptor from txdb and adds it to tx level.
1363  * When Tx level drops under some predefined treshhold, the driver
1364  * stops the TX queue. When TX level rises above that level,
1365  * the tx queue is enabled again.
1366  *
1367  * This technique avoids eccessive reading of RPTR and WPTR registers.
1368  * As our benchmarks shows, it adds 1.5 Gbit/sec to NIS's throuput.
1369  */
1370
1371 /*************************************************************************
1372  *     Tx DB                                                             *
1373  *************************************************************************/
1374 static inline int bdx_tx_db_size(struct txdb *db)
1375 {
1376         int taken = db->wptr - db->rptr;
1377         if (taken < 0)
1378                 taken = db->size + 1 + taken;   /* (size + 1) equals memsz */
1379
1380         return db->size - taken;
1381 }
1382
1383 /**
1384  * __bdx_tx_db_ptr_next - helper function, increment read/write pointer + wrap
1385  * @db: tx data base
1386  * @pptr: read or write pointer
1387  */
1388 static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr)
1389 {
1390         BDX_ASSERT(db == NULL || pptr == NULL); /* sanity */
1391
1392         BDX_ASSERT(*pptr != db->rptr && /* expect either read */
1393                    *pptr != db->wptr);  /* or write pointer */
1394
1395         BDX_ASSERT(*pptr < db->start || /* pointer has to be */
1396                    *pptr >= db->end);   /* in range */
1397
1398         ++*pptr;
1399         if (unlikely(*pptr == db->end))
1400                 *pptr = db->start;
1401 }
1402
1403 /**
1404  * bdx_tx_db_inc_rptr - increment read pointer
1405  * @db: tx data base
1406  */
1407 static inline void bdx_tx_db_inc_rptr(struct txdb *db)
1408 {
1409         BDX_ASSERT(db->rptr == db->wptr);       /* can't read from empty db */
1410         __bdx_tx_db_ptr_next(db, &db->rptr);
1411 }
1412
1413 /**
1414  * bdx_tx_db_inc_wptr - increment write pointer
1415  * @db: tx data base
1416  */
1417 static inline void bdx_tx_db_inc_wptr(struct txdb *db)
1418 {
1419         __bdx_tx_db_ptr_next(db, &db->wptr);
1420         BDX_ASSERT(db->rptr == db->wptr);       /* we can not get empty db as
1421                                                    a result of write */
1422 }
1423
1424 /**
1425  * bdx_tx_db_init - creates and initializes tx db
1426  * @d: tx data base
1427  * @sz_type: size of tx fifo
1428  *
1429  * Returns 0 on success, error code otherwise
1430  */
1431 static int bdx_tx_db_init(struct txdb *d, int sz_type)
1432 {
1433         int memsz = FIFO_SIZE * (1 << (sz_type + 1));
1434
1435         d->start = vmalloc(memsz);
1436         if (!d->start)
1437                 return -ENOMEM;
1438
1439         /*
1440          * In order to differentiate between db is empty and db is full
1441          * states at least one element should always be empty in order to
1442          * avoid rptr == wptr which means db is empty
1443          */
1444         d->size = memsz / sizeof(struct tx_map) - 1;
1445         d->end = d->start + d->size + 1;        /* just after last element */
1446
1447         /* all dbs are created equally empty */
1448         d->rptr = d->start;
1449         d->wptr = d->start;
1450
1451         return 0;
1452 }
1453
1454 /**
1455  * bdx_tx_db_close - closes tx db and frees all memory
1456  * @d: tx data base
1457  */
1458 static void bdx_tx_db_close(struct txdb *d)
1459 {
1460         BDX_ASSERT(d == NULL);
1461
1462         vfree(d->start);
1463         d->start = NULL;
1464 }
1465
1466 /*************************************************************************
1467  *     Tx Engine                                                         *
1468  *************************************************************************/
1469
1470 /* sizes of tx desc (including padding if needed) as function
1471  * of skb's frag number */
1472 static struct {
1473         u16 bytes;
1474         u16 qwords;             /* qword = 64 bit */
1475 } txd_sizes[MAX_SKB_FRAGS + 1];
1476
1477 /**
1478  * bdx_tx_map_skb - creates and stores dma mappings for skb's data blocks
1479  * @priv: NIC private structure
1480  * @skb: socket buffer to map
1481  * @txdd: TX descriptor to use
1482  *
1483  * It makes dma mappings for skb's data blocks and writes them to PBL of
1484  * new tx descriptor. It also stores them in the tx db, so they could be
1485  * unmaped after data was sent. It is reponsibility of a caller to make
1486  * sure that there is enough space in the tx db. Last element holds pointer
1487  * to skb itself and marked with zero length
1488  */
1489 static inline void
1490 bdx_tx_map_skb(struct bdx_priv *priv, struct sk_buff *skb,
1491                struct txd_desc *txdd)
1492 {
1493         struct txdb *db = &priv->txdb;
1494         struct pbl *pbl = &txdd->pbl[0];
1495         int nr_frags = skb_shinfo(skb)->nr_frags;
1496         int i;
1497
1498         db->wptr->len = skb_headlen(skb);
1499         db->wptr->addr.dma = pci_map_single(priv->pdev, skb->data,
1500                                             db->wptr->len, PCI_DMA_TODEVICE);
1501         pbl->len = CPU_CHIP_SWAP32(db->wptr->len);
1502         pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma));
1503         pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma));
1504         DBG("=== pbl   len: 0x%x ================\n", pbl->len);
1505         DBG("=== pbl pa_lo: 0x%x ================\n", pbl->pa_lo);
1506         DBG("=== pbl pa_hi: 0x%x ================\n", pbl->pa_hi);
1507         bdx_tx_db_inc_wptr(db);
1508
1509         for (i = 0; i < nr_frags; i++) {
1510                 const struct skb_frag_struct *frag;
1511
1512                 frag = &skb_shinfo(skb)->frags[i];
1513                 db->wptr->len = skb_frag_size(frag);
1514                 db->wptr->addr.dma = skb_frag_dma_map(&priv->pdev->dev, frag,
1515                                                       0, skb_frag_size(frag),
1516                                                       DMA_TO_DEVICE);
1517
1518                 pbl++;
1519                 pbl->len = CPU_CHIP_SWAP32(db->wptr->len);
1520                 pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma));
1521                 pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma));
1522                 bdx_tx_db_inc_wptr(db);
1523         }
1524
1525         /* add skb clean up info. */
1526         db->wptr->len = -txd_sizes[nr_frags].bytes;
1527         db->wptr->addr.skb = skb;
1528         bdx_tx_db_inc_wptr(db);
1529 }
1530
1531 /* init_txd_sizes - precalculate sizes of descriptors for skbs up to 16 frags
1532  * number of frags is used as index to fetch correct descriptors size,
1533  * instead of calculating it each time */
1534 static void __init init_txd_sizes(void)
1535 {
1536         int i, lwords;
1537
1538         /* 7 - is number of lwords in txd with one phys buffer
1539          * 3 - is number of lwords used for every additional phys buffer */
1540         for (i = 0; i < MAX_SKB_FRAGS + 1; i++) {
1541                 lwords = 7 + (i * 3);
1542                 if (lwords & 1)
1543                         lwords++;       /* pad it with 1 lword */
1544                 txd_sizes[i].qwords = lwords >> 1;
1545                 txd_sizes[i].bytes = lwords << 2;
1546         }
1547 }
1548
1549 /* bdx_tx_init - initialize all Tx related stuff.
1550  * Namely, TXD and TXF fifos, database etc */
1551 static int bdx_tx_init(struct bdx_priv *priv)
1552 {
1553         if (bdx_fifo_init(priv, &priv->txd_fifo0.m, priv->txd_size,
1554                           regTXD_CFG0_0,
1555                           regTXD_CFG1_0, regTXD_RPTR_0, regTXD_WPTR_0))
1556                 goto err_mem;
1557         if (bdx_fifo_init(priv, &priv->txf_fifo0.m, priv->txf_size,
1558                           regTXF_CFG0_0,
1559                           regTXF_CFG1_0, regTXF_RPTR_0, regTXF_WPTR_0))
1560                 goto err_mem;
1561
1562         /* The TX db has to keep mappings for all packets sent (on TxD)
1563          * and not yet reclaimed (on TxF) */
1564         if (bdx_tx_db_init(&priv->txdb, max(priv->txd_size, priv->txf_size)))
1565                 goto err_mem;
1566
1567         priv->tx_level = BDX_MAX_TX_LEVEL;
1568 #ifdef BDX_DELAY_WPTR
1569         priv->tx_update_mark = priv->tx_level - 1024;
1570 #endif
1571         return 0;
1572
1573 err_mem:
1574         netdev_err(priv->ndev, "Tx init failed\n");
1575         return -ENOMEM;
1576 }
1577
1578 /**
1579  * bdx_tx_space - calculates available space in TX fifo
1580  * @priv: NIC private structure
1581  *
1582  * Returns available space in TX fifo in bytes
1583  */
1584 static inline int bdx_tx_space(struct bdx_priv *priv)
1585 {
1586         struct txd_fifo *f = &priv->txd_fifo0;
1587         int fsize;
1588
1589         f->m.rptr = READ_REG(priv, f->m.reg_RPTR) & TXF_WPTR_WR_PTR;
1590         fsize = f->m.rptr - f->m.wptr;
1591         if (fsize <= 0)
1592                 fsize = f->m.memsz + fsize;
1593         return fsize;
1594 }
1595
1596 /**
1597  * bdx_tx_transmit - send packet to NIC
1598  * @skb: packet to send
1599  * @ndev: network device assigned to NIC
1600  * Return codes:
1601  * o NETDEV_TX_OK everything ok.
1602  * o NETDEV_TX_BUSY Cannot transmit packet, try later
1603  *   Usually a bug, means queue start/stop flow control is broken in
1604  *   the driver. Note: the driver must NOT put the skb in its DMA ring.
1605  */
1606 static netdev_tx_t bdx_tx_transmit(struct sk_buff *skb,
1607                                    struct net_device *ndev)
1608 {
1609         struct bdx_priv *priv = netdev_priv(ndev);
1610         struct txd_fifo *f = &priv->txd_fifo0;
1611         int txd_checksum = 7;   /* full checksum */
1612         int txd_lgsnd = 0;
1613         int txd_vlan_id = 0;
1614         int txd_vtag = 0;
1615         int txd_mss = 0;
1616
1617         int nr_frags = skb_shinfo(skb)->nr_frags;
1618         struct txd_desc *txdd;
1619         int len;
1620         unsigned long flags;
1621
1622         ENTER;
1623         local_irq_save(flags);
1624         spin_lock(&priv->tx_lock);
1625
1626         /* build tx descriptor */
1627         BDX_ASSERT(f->m.wptr >= f->m.memsz);    /* started with valid wptr */
1628         txdd = (struct txd_desc *)(f->m.va + f->m.wptr);
1629         if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL))
1630                 txd_checksum = 0;
1631
1632         if (skb_shinfo(skb)->gso_size) {
1633                 txd_mss = skb_shinfo(skb)->gso_size;
1634                 txd_lgsnd = 1;
1635                 DBG("skb %p skb len %d gso size = %d\n", skb, skb->len,
1636                     txd_mss);
1637         }
1638
1639         if (skb_vlan_tag_present(skb)) {
1640                 /*Cut VLAN ID to 12 bits */
1641                 txd_vlan_id = skb_vlan_tag_get(skb) & BITS_MASK(12);
1642                 txd_vtag = 1;
1643         }
1644
1645         txdd->length = CPU_CHIP_SWAP16(skb->len);
1646         txdd->mss = CPU_CHIP_SWAP16(txd_mss);
1647         txdd->txd_val1 =
1648             CPU_CHIP_SWAP32(TXD_W1_VAL
1649                             (txd_sizes[nr_frags].qwords, txd_checksum, txd_vtag,
1650                              txd_lgsnd, txd_vlan_id));
1651         DBG("=== TxD desc =====================\n");
1652         DBG("=== w1: 0x%x ================\n", txdd->txd_val1);
1653         DBG("=== w2: mss 0x%x len 0x%x\n", txdd->mss, txdd->length);
1654
1655         bdx_tx_map_skb(priv, skb, txdd);
1656
1657         /* increment TXD write pointer. In case of
1658            fifo wrapping copy reminder of the descriptor
1659            to the beginning */
1660         f->m.wptr += txd_sizes[nr_frags].bytes;
1661         len = f->m.wptr - f->m.memsz;
1662         if (unlikely(len >= 0)) {
1663                 f->m.wptr = len;
1664                 if (len > 0) {
1665                         BDX_ASSERT(len > f->m.memsz);
1666                         memcpy(f->m.va, f->m.va + f->m.memsz, len);
1667                 }
1668         }
1669         BDX_ASSERT(f->m.wptr >= f->m.memsz);    /* finished with valid wptr */
1670
1671         priv->tx_level -= txd_sizes[nr_frags].bytes;
1672         BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL);
1673 #ifdef BDX_DELAY_WPTR
1674         if (priv->tx_level > priv->tx_update_mark) {
1675                 /* Force memory writes to complete before letting h/w
1676                    know there are new descriptors to fetch.
1677                    (might be needed on platforms like IA64)
1678                    wmb(); */
1679                 WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1680         } else {
1681                 if (priv->tx_noupd++ > BDX_NO_UPD_PACKETS) {
1682                         priv->tx_noupd = 0;
1683                         WRITE_REG(priv, f->m.reg_WPTR,
1684                                   f->m.wptr & TXF_WPTR_WR_PTR);
1685                 }
1686         }
1687 #else
1688         /* Force memory writes to complete before letting h/w
1689            know there are new descriptors to fetch.
1690            (might be needed on platforms like IA64)
1691            wmb(); */
1692         WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1693
1694 #endif
1695 #ifdef BDX_LLTX
1696         netif_trans_update(ndev); /* NETIF_F_LLTX driver :( */
1697 #endif
1698         ndev->stats.tx_packets++;
1699         ndev->stats.tx_bytes += skb->len;
1700
1701         if (priv->tx_level < BDX_MIN_TX_LEVEL) {
1702                 DBG("%s: %s: TX Q STOP level %d\n",
1703                     BDX_DRV_NAME, ndev->name, priv->tx_level);
1704                 netif_stop_queue(ndev);
1705         }
1706
1707         spin_unlock_irqrestore(&priv->tx_lock, flags);
1708         return NETDEV_TX_OK;
1709 }
1710
1711 /**
1712  * bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ.
1713  * @priv: bdx adapter
1714  *
1715  * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS
1716  * that those packets were sent
1717  */
1718 static void bdx_tx_cleanup(struct bdx_priv *priv)
1719 {
1720         struct txf_fifo *f = &priv->txf_fifo0;
1721         struct txdb *db = &priv->txdb;
1722         int tx_level = 0;
1723
1724         ENTER;
1725         f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_MASK;
1726         BDX_ASSERT(f->m.rptr >= f->m.memsz);    /* started with valid rptr */
1727
1728         while (f->m.wptr != f->m.rptr) {
1729                 f->m.rptr += BDX_TXF_DESC_SZ;
1730                 f->m.rptr &= f->m.size_mask;
1731
1732                 /* unmap all the fragments */
1733                 /* first has to come tx_maps containing dma */
1734                 BDX_ASSERT(db->rptr->len == 0);
1735                 do {
1736                         BDX_ASSERT(db->rptr->addr.dma == 0);
1737                         pci_unmap_page(priv->pdev, db->rptr->addr.dma,
1738                                        db->rptr->len, PCI_DMA_TODEVICE);
1739                         bdx_tx_db_inc_rptr(db);
1740                 } while (db->rptr->len > 0);
1741                 tx_level -= db->rptr->len;      /* '-' koz len is negative */
1742
1743                 /* now should come skb pointer - free it */
1744                 dev_kfree_skb_irq(db->rptr->addr.skb);
1745                 bdx_tx_db_inc_rptr(db);
1746         }
1747
1748         /* let h/w know which TXF descriptors were cleaned */
1749         BDX_ASSERT((f->m.wptr & TXF_WPTR_WR_PTR) >= f->m.memsz);
1750         WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR);
1751
1752         /* We reclaimed resources, so in case the Q is stopped by xmit callback,
1753          * we resume the transmission and use tx_lock to synchronize with xmit.*/
1754         spin_lock(&priv->tx_lock);
1755         priv->tx_level += tx_level;
1756         BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL);
1757 #ifdef BDX_DELAY_WPTR
1758         if (priv->tx_noupd) {
1759                 priv->tx_noupd = 0;
1760                 WRITE_REG(priv, priv->txd_fifo0.m.reg_WPTR,
1761                           priv->txd_fifo0.m.wptr & TXF_WPTR_WR_PTR);
1762         }
1763 #endif
1764
1765         if (unlikely(netif_queue_stopped(priv->ndev) &&
1766                      netif_carrier_ok(priv->ndev) &&
1767                      (priv->tx_level >= BDX_MIN_TX_LEVEL))) {
1768                 DBG("%s: %s: TX Q WAKE level %d\n",
1769                     BDX_DRV_NAME, priv->ndev->name, priv->tx_level);
1770                 netif_wake_queue(priv->ndev);
1771         }
1772         spin_unlock(&priv->tx_lock);
1773 }
1774
1775 /**
1776  * bdx_tx_free_skbs - frees all skbs from TXD fifo.
1777  * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod
1778  */
1779 static void bdx_tx_free_skbs(struct bdx_priv *priv)
1780 {
1781         struct txdb *db = &priv->txdb;
1782
1783         ENTER;
1784         while (db->rptr != db->wptr) {
1785                 if (likely(db->rptr->len))
1786                         pci_unmap_page(priv->pdev, db->rptr->addr.dma,
1787                                        db->rptr->len, PCI_DMA_TODEVICE);
1788                 else
1789                         dev_kfree_skb(db->rptr->addr.skb);
1790                 bdx_tx_db_inc_rptr(db);
1791         }
1792         RET();
1793 }
1794
1795 /* bdx_tx_free - frees all Tx resources */
1796 static void bdx_tx_free(struct bdx_priv *priv)
1797 {
1798         ENTER;
1799         bdx_tx_free_skbs(priv);
1800         bdx_fifo_free(priv, &priv->txd_fifo0.m);
1801         bdx_fifo_free(priv, &priv->txf_fifo0.m);
1802         bdx_tx_db_close(&priv->txdb);
1803 }
1804
1805 /**
1806  * bdx_tx_push_desc - push descriptor to TxD fifo
1807  * @priv: NIC private structure
1808  * @data: desc's data
1809  * @size: desc's size
1810  *
1811  * Pushes desc to TxD fifo and overlaps it if needed.
1812  * NOTE: this func does not check for available space. this is responsibility
1813  *    of the caller. Neither does it check that data size is smaller than
1814  *    fifo size.
1815  */
1816 static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
1817 {
1818         struct txd_fifo *f = &priv->txd_fifo0;
1819         int i = f->m.memsz - f->m.wptr;
1820
1821         if (size == 0)
1822                 return;
1823
1824         if (i > size) {
1825                 memcpy(f->m.va + f->m.wptr, data, size);
1826                 f->m.wptr += size;
1827         } else {
1828                 memcpy(f->m.va + f->m.wptr, data, i);
1829                 f->m.wptr = size - i;
1830                 memcpy(f->m.va, data + i, f->m.wptr);
1831         }
1832         WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1833 }
1834
1835 /**
1836  * bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way
1837  * @priv: NIC private structure
1838  * @data: desc's data
1839  * @size: desc's size
1840  *
1841  * NOTE: this func does check for available space and, if necessary, waits for
1842  *   NIC to read existing data before writing new one.
1843  */
1844 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
1845 {
1846         int timer = 0;
1847         ENTER;
1848
1849         while (size > 0) {
1850                 /* we substruct 8 because when fifo is full rptr == wptr
1851                    which also means that fifo is empty, we can understand
1852                    the difference, but could hw do the same ??? :) */
1853                 int avail = bdx_tx_space(priv) - 8;
1854                 if (avail <= 0) {
1855                         if (timer++ > 300) {    /* prevent endless loop */
1856                                 DBG("timeout while writing desc to TxD fifo\n");
1857                                 break;
1858                         }
1859                         udelay(50);     /* give hw a chance to clean fifo */
1860                         continue;
1861                 }
1862                 avail = min(avail, size);
1863                 DBG("about to push  %d bytes starting %p size %d\n", avail,
1864                     data, size);
1865                 bdx_tx_push_desc(priv, data, avail);
1866                 size -= avail;
1867                 data += avail;
1868         }
1869         RET();
1870 }
1871
1872 static const struct net_device_ops bdx_netdev_ops = {
1873         .ndo_open               = bdx_open,
1874         .ndo_stop               = bdx_close,
1875         .ndo_start_xmit         = bdx_tx_transmit,
1876         .ndo_validate_addr      = eth_validate_addr,
1877         .ndo_do_ioctl           = bdx_ioctl,
1878         .ndo_set_rx_mode        = bdx_setmulti,
1879         .ndo_change_mtu         = bdx_change_mtu,
1880         .ndo_set_mac_address    = bdx_set_mac,
1881         .ndo_vlan_rx_add_vid    = bdx_vlan_rx_add_vid,
1882         .ndo_vlan_rx_kill_vid   = bdx_vlan_rx_kill_vid,
1883 };
1884
1885 /**
1886  * bdx_probe - Device Initialization Routine
1887  * @pdev: PCI device information struct
1888  * @ent: entry in bdx_pci_tbl
1889  *
1890  * Returns 0 on success, negative on failure
1891  *
1892  * bdx_probe initializes an adapter identified by a pci_dev structure.
1893  * The OS initialization, configuring of the adapter private structure,
1894  * and a hardware reset occur.
1895  *
1896  * functions and their order used as explained in
1897  * /usr/src/linux/Documentation/DMA-{API,mapping}.txt
1898  *
1899  */
1900
1901 /* TBD: netif_msg should be checked and implemented. I disable it for now */
1902 static int
1903 bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1904 {
1905         struct net_device *ndev;
1906         struct bdx_priv *priv;
1907         int err, pci_using_dac, port;
1908         unsigned long pciaddr;
1909         u32 regionSize;
1910         struct pci_nic *nic;
1911
1912         ENTER;
1913
1914         nic = vmalloc(sizeof(*nic));
1915         if (!nic)
1916                 RET(-ENOMEM);
1917
1918     /************** pci *****************/
1919         err = pci_enable_device(pdev);
1920         if (err)                        /* it triggers interrupt, dunno why. */
1921                 goto err_pci;           /* it's not a problem though */
1922
1923         if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) &&
1924             !(err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))) {
1925                 pci_using_dac = 1;
1926         } else {
1927                 if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
1928                     (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
1929                         pr_err("No usable DMA configuration, aborting\n");
1930                         goto err_dma;
1931                 }
1932                 pci_using_dac = 0;
1933         }
1934
1935         err = pci_request_regions(pdev, BDX_DRV_NAME);
1936         if (err)
1937                 goto err_dma;
1938
1939         pci_set_master(pdev);
1940
1941         pciaddr = pci_resource_start(pdev, 0);
1942         if (!pciaddr) {
1943                 err = -EIO;
1944                 pr_err("no MMIO resource\n");
1945                 goto err_out_res;
1946         }
1947         regionSize = pci_resource_len(pdev, 0);
1948         if (regionSize < BDX_REGS_SIZE) {
1949                 err = -EIO;
1950                 pr_err("MMIO resource (%x) too small\n", regionSize);
1951                 goto err_out_res;
1952         }
1953
1954         nic->regs = ioremap(pciaddr, regionSize);
1955         if (!nic->regs) {
1956                 err = -EIO;
1957                 pr_err("ioremap failed\n");
1958                 goto err_out_res;
1959         }
1960
1961         if (pdev->irq < 2) {
1962                 err = -EIO;
1963                 pr_err("invalid irq (%d)\n", pdev->irq);
1964                 goto err_out_iomap;
1965         }
1966         pci_set_drvdata(pdev, nic);
1967
1968         if (pdev->device == 0x3014)
1969                 nic->port_num = 2;
1970         else
1971                 nic->port_num = 1;
1972
1973         print_hw_id(pdev);
1974
1975         bdx_hw_reset_direct(nic->regs);
1976
1977         nic->irq_type = IRQ_INTX;
1978 #ifdef BDX_MSI
1979         if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) {
1980                 err = pci_enable_msi(pdev);
1981                 if (err)
1982                         pr_err("Can't enable msi. error is %d\n", err);
1983                 else
1984                         nic->irq_type = IRQ_MSI;
1985         } else
1986                 DBG("HW does not support MSI\n");
1987 #endif
1988
1989     /************** netdev **************/
1990         for (port = 0; port < nic->port_num; port++) {
1991                 ndev = alloc_etherdev(sizeof(struct bdx_priv));
1992                 if (!ndev) {
1993                         err = -ENOMEM;
1994                         goto err_out_iomap;
1995                 }
1996
1997                 ndev->netdev_ops = &bdx_netdev_ops;
1998                 ndev->tx_queue_len = BDX_NDEV_TXQ_LEN;
1999
2000                 bdx_set_ethtool_ops(ndev);      /* ethtool interface */
2001
2002                 /* these fields are used for info purposes only
2003                  * so we can have them same for all ports of the board */
2004                 ndev->if_port = port;
2005                 ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO
2006                     | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
2007                     NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXCSUM
2008                     ;
2009                 ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
2010                         NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_TX;
2011
2012                 if (pci_using_dac)
2013                         ndev->features |= NETIF_F_HIGHDMA;
2014
2015         /************** priv ****************/
2016                 priv = nic->priv[port] = netdev_priv(ndev);
2017
2018                 priv->pBdxRegs = nic->regs + port * 0x8000;
2019                 priv->port = port;
2020                 priv->pdev = pdev;
2021                 priv->ndev = ndev;
2022                 priv->nic = nic;
2023                 priv->msg_enable = BDX_DEF_MSG_ENABLE;
2024
2025                 netif_napi_add(ndev, &priv->napi, bdx_poll, 64);
2026
2027                 if ((readl(nic->regs + FPGA_VER) & 0xFFF) == 308) {
2028                         DBG("HW statistics not supported\n");
2029                         priv->stats_flag = 0;
2030                 } else {
2031                         priv->stats_flag = 1;
2032                 }
2033
2034                 /* Initialize fifo sizes. */
2035                 priv->txd_size = 2;
2036                 priv->txf_size = 2;
2037                 priv->rxd_size = 2;
2038                 priv->rxf_size = 3;
2039
2040                 /* Initialize the initial coalescing registers. */
2041                 priv->rdintcm = INT_REG_VAL(0x20, 1, 4, 12);
2042                 priv->tdintcm = INT_REG_VAL(0x20, 1, 0, 12);
2043
2044                 /* ndev->xmit_lock spinlock is not used.
2045                  * Private priv->tx_lock is used for synchronization
2046                  * between transmit and TX irq cleanup.  In addition
2047                  * set multicast list callback has to use priv->tx_lock.
2048                  */
2049 #ifdef BDX_LLTX
2050                 ndev->features |= NETIF_F_LLTX;
2051 #endif
2052                 /* MTU range: 60 - 16384 */
2053                 ndev->min_mtu = ETH_ZLEN;
2054                 ndev->max_mtu = BDX_MAX_MTU;
2055
2056                 spin_lock_init(&priv->tx_lock);
2057
2058                 /*bdx_hw_reset(priv); */
2059                 if (bdx_read_mac(priv)) {
2060                         pr_err("load MAC address failed\n");
2061                         goto err_out_iomap;
2062                 }
2063                 SET_NETDEV_DEV(ndev, &pdev->dev);
2064                 err = register_netdev(ndev);
2065                 if (err) {
2066                         pr_err("register_netdev failed\n");
2067                         goto err_out_free;
2068                 }
2069                 netif_carrier_off(ndev);
2070                 netif_stop_queue(ndev);
2071
2072                 print_eth_id(ndev);
2073         }
2074         RET(0);
2075
2076 err_out_free:
2077         free_netdev(ndev);
2078 err_out_iomap:
2079         iounmap(nic->regs);
2080 err_out_res:
2081         pci_release_regions(pdev);
2082 err_dma:
2083         pci_disable_device(pdev);
2084 err_pci:
2085         vfree(nic);
2086
2087         RET(err);
2088 }
2089
2090 /****************** Ethtool interface *********************/
2091 /* get strings for statistics counters */
2092 static const char
2093  bdx_stat_names[][ETH_GSTRING_LEN] = {
2094         "InUCast",              /* 0x7200 */
2095         "InMCast",              /* 0x7210 */
2096         "InBCast",              /* 0x7220 */
2097         "InPkts",               /* 0x7230 */
2098         "InErrors",             /* 0x7240 */
2099         "InDropped",            /* 0x7250 */
2100         "FrameTooLong",         /* 0x7260 */
2101         "FrameSequenceErrors",  /* 0x7270 */
2102         "InVLAN",               /* 0x7280 */
2103         "InDroppedDFE",         /* 0x7290 */
2104         "InDroppedIntFull",     /* 0x72A0 */
2105         "InFrameAlignErrors",   /* 0x72B0 */
2106
2107         /* 0x72C0-0x72E0 RSRV */
2108
2109         "OutUCast",             /* 0x72F0 */
2110         "OutMCast",             /* 0x7300 */
2111         "OutBCast",             /* 0x7310 */
2112         "OutPkts",              /* 0x7320 */
2113
2114         /* 0x7330-0x7360 RSRV */
2115
2116         "OutVLAN",              /* 0x7370 */
2117         "InUCastOctects",       /* 0x7380 */
2118         "OutUCastOctects",      /* 0x7390 */
2119
2120         /* 0x73A0-0x73B0 RSRV */
2121
2122         "InBCastOctects",       /* 0x73C0 */
2123         "OutBCastOctects",      /* 0x73D0 */
2124         "InOctects",            /* 0x73E0 */
2125         "OutOctects",           /* 0x73F0 */
2126 };
2127
2128 /*
2129  * bdx_get_link_ksettings - get device-specific settings
2130  * @netdev
2131  * @ecmd
2132  */
2133 static int bdx_get_link_ksettings(struct net_device *netdev,
2134                                   struct ethtool_link_ksettings *ecmd)
2135 {
2136         ethtool_link_ksettings_zero_link_mode(ecmd, supported);
2137         ethtool_link_ksettings_add_link_mode(ecmd, supported,
2138                                              10000baseT_Full);
2139         ethtool_link_ksettings_add_link_mode(ecmd, supported, FIBRE);
2140         ethtool_link_ksettings_zero_link_mode(ecmd, advertising);
2141         ethtool_link_ksettings_add_link_mode(ecmd, advertising,
2142                                              10000baseT_Full);
2143         ethtool_link_ksettings_add_link_mode(ecmd, advertising, FIBRE);
2144
2145         ecmd->base.speed = SPEED_10000;
2146         ecmd->base.duplex = DUPLEX_FULL;
2147         ecmd->base.port = PORT_FIBRE;
2148         ecmd->base.autoneg = AUTONEG_DISABLE;
2149
2150         return 0;
2151 }
2152
2153 /*
2154  * bdx_get_drvinfo - report driver information
2155  * @netdev
2156  * @drvinfo
2157  */
2158 static void
2159 bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
2160 {
2161         struct bdx_priv *priv = netdev_priv(netdev);
2162
2163         strlcpy(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver));
2164         strlcpy(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version));
2165         strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
2166         strlcpy(drvinfo->bus_info, pci_name(priv->pdev),
2167                 sizeof(drvinfo->bus_info));
2168 }
2169
2170 /*
2171  * bdx_get_coalesce - get interrupt coalescing parameters
2172  * @netdev
2173  * @ecoal
2174  */
2175 static int
2176 bdx_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
2177 {
2178         u32 rdintcm;
2179         u32 tdintcm;
2180         struct bdx_priv *priv = netdev_priv(netdev);
2181
2182         rdintcm = priv->rdintcm;
2183         tdintcm = priv->tdintcm;
2184
2185         /* PCK_TH measures in multiples of FIFO bytes
2186            We translate to packets */
2187         ecoal->rx_coalesce_usecs = GET_INT_COAL(rdintcm) * INT_COAL_MULT;
2188         ecoal->rx_max_coalesced_frames =
2189             ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc));
2190
2191         ecoal->tx_coalesce_usecs = GET_INT_COAL(tdintcm) * INT_COAL_MULT;
2192         ecoal->tx_max_coalesced_frames =
2193             ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ);
2194
2195         /* adaptive parameters ignored */
2196         return 0;
2197 }
2198
2199 /*
2200  * bdx_set_coalesce - set interrupt coalescing parameters
2201  * @netdev
2202  * @ecoal
2203  */
2204 static int
2205 bdx_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
2206 {
2207         u32 rdintcm;
2208         u32 tdintcm;
2209         struct bdx_priv *priv = netdev_priv(netdev);
2210         int rx_coal;
2211         int tx_coal;
2212         int rx_max_coal;
2213         int tx_max_coal;
2214
2215         /* Check for valid input */
2216         rx_coal = ecoal->rx_coalesce_usecs / INT_COAL_MULT;
2217         tx_coal = ecoal->tx_coalesce_usecs / INT_COAL_MULT;
2218         rx_max_coal = ecoal->rx_max_coalesced_frames;
2219         tx_max_coal = ecoal->tx_max_coalesced_frames;
2220
2221         /* Translate from packets to multiples of FIFO bytes */
2222         rx_max_coal =
2223             (((rx_max_coal * sizeof(struct rxf_desc)) + PCK_TH_MULT - 1)
2224              / PCK_TH_MULT);
2225         tx_max_coal =
2226             (((tx_max_coal * BDX_TXF_DESC_SZ) + PCK_TH_MULT - 1)
2227              / PCK_TH_MULT);
2228
2229         if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF) ||
2230             (rx_max_coal > 0xF) || (tx_max_coal > 0xF))
2231                 return -EINVAL;
2232
2233         rdintcm = INT_REG_VAL(rx_coal, GET_INT_COAL_RC(priv->rdintcm),
2234                               GET_RXF_TH(priv->rdintcm), rx_max_coal);
2235         tdintcm = INT_REG_VAL(tx_coal, GET_INT_COAL_RC(priv->tdintcm), 0,
2236                               tx_max_coal);
2237
2238         priv->rdintcm = rdintcm;
2239         priv->tdintcm = tdintcm;
2240
2241         WRITE_REG(priv, regRDINTCM0, rdintcm);
2242         WRITE_REG(priv, regTDINTCM0, tdintcm);
2243
2244         return 0;
2245 }
2246
2247 /* Convert RX fifo size to number of pending packets */
2248 static inline int bdx_rx_fifo_size_to_packets(int rx_size)
2249 {
2250         return (FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc);
2251 }
2252
2253 /* Convert TX fifo size to number of pending packets */
2254 static inline int bdx_tx_fifo_size_to_packets(int tx_size)
2255 {
2256         return (FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ;
2257 }
2258
2259 /*
2260  * bdx_get_ringparam - report ring sizes
2261  * @netdev
2262  * @ring
2263  */
2264 static void
2265 bdx_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
2266 {
2267         struct bdx_priv *priv = netdev_priv(netdev);
2268
2269         /*max_pending - the maximum-sized FIFO we allow */
2270         ring->rx_max_pending = bdx_rx_fifo_size_to_packets(3);
2271         ring->tx_max_pending = bdx_tx_fifo_size_to_packets(3);
2272         ring->rx_pending = bdx_rx_fifo_size_to_packets(priv->rxf_size);
2273         ring->tx_pending = bdx_tx_fifo_size_to_packets(priv->txd_size);
2274 }
2275
2276 /*
2277  * bdx_set_ringparam - set ring sizes
2278  * @netdev
2279  * @ring
2280  */
2281 static int
2282 bdx_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
2283 {
2284         struct bdx_priv *priv = netdev_priv(netdev);
2285         int rx_size = 0;
2286         int tx_size = 0;
2287
2288         for (; rx_size < 4; rx_size++) {
2289                 if (bdx_rx_fifo_size_to_packets(rx_size) >= ring->rx_pending)
2290                         break;
2291         }
2292         if (rx_size == 4)
2293                 rx_size = 3;
2294
2295         for (; tx_size < 4; tx_size++) {
2296                 if (bdx_tx_fifo_size_to_packets(tx_size) >= ring->tx_pending)
2297                         break;
2298         }
2299         if (tx_size == 4)
2300                 tx_size = 3;
2301
2302         /*Is there anything to do? */
2303         if ((rx_size == priv->rxf_size) &&
2304             (tx_size == priv->txd_size))
2305                 return 0;
2306
2307         priv->rxf_size = rx_size;
2308         if (rx_size > 1)
2309                 priv->rxd_size = rx_size - 1;
2310         else
2311                 priv->rxd_size = rx_size;
2312
2313         priv->txf_size = priv->txd_size = tx_size;
2314
2315         if (netif_running(netdev)) {
2316                 bdx_close(netdev);
2317                 bdx_open(netdev);
2318         }
2319         return 0;
2320 }
2321
2322 /*
2323  * bdx_get_strings - return a set of strings that describe the requested objects
2324  * @netdev
2325  * @data
2326  */
2327 static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
2328 {
2329         switch (stringset) {
2330         case ETH_SS_STATS:
2331                 memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names));
2332                 break;
2333         }
2334 }
2335
2336 /*
2337  * bdx_get_sset_count - return number of statistics or tests
2338  * @netdev
2339  */
2340 static int bdx_get_sset_count(struct net_device *netdev, int stringset)
2341 {
2342         struct bdx_priv *priv = netdev_priv(netdev);
2343
2344         switch (stringset) {
2345         case ETH_SS_STATS:
2346                 BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
2347                            != sizeof(struct bdx_stats) / sizeof(u64));
2348                 return (priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)  : 0;
2349         }
2350
2351         return -EINVAL;
2352 }
2353
2354 /*
2355  * bdx_get_ethtool_stats - return device's hardware L2 statistics
2356  * @netdev
2357  * @stats
2358  * @data
2359  */
2360 static void bdx_get_ethtool_stats(struct net_device *netdev,
2361                                   struct ethtool_stats *stats, u64 *data)
2362 {
2363         struct bdx_priv *priv = netdev_priv(netdev);
2364
2365         if (priv->stats_flag) {
2366
2367                 /* Update stats from HW */
2368                 bdx_update_stats(priv);
2369
2370                 /* Copy data to user buffer */
2371                 memcpy(data, &priv->hw_stats, sizeof(priv->hw_stats));
2372         }
2373 }
2374
2375 /*
2376  * bdx_set_ethtool_ops - ethtool interface implementation
2377  * @netdev
2378  */
2379 static void bdx_set_ethtool_ops(struct net_device *netdev)
2380 {
2381         static const struct ethtool_ops bdx_ethtool_ops = {
2382                 .get_drvinfo = bdx_get_drvinfo,
2383                 .get_link = ethtool_op_get_link,
2384                 .get_coalesce = bdx_get_coalesce,
2385                 .set_coalesce = bdx_set_coalesce,
2386                 .get_ringparam = bdx_get_ringparam,
2387                 .set_ringparam = bdx_set_ringparam,
2388                 .get_strings = bdx_get_strings,
2389                 .get_sset_count = bdx_get_sset_count,
2390                 .get_ethtool_stats = bdx_get_ethtool_stats,
2391                 .get_link_ksettings = bdx_get_link_ksettings,
2392         };
2393
2394         netdev->ethtool_ops = &bdx_ethtool_ops;
2395 }
2396
2397 /**
2398  * bdx_remove - Device Removal Routine
2399  * @pdev: PCI device information struct
2400  *
2401  * bdx_remove is called by the PCI subsystem to alert the driver
2402  * that it should release a PCI device.  The could be caused by a
2403  * Hot-Plug event, or because the driver is going to be removed from
2404  * memory.
2405  **/
2406 static void bdx_remove(struct pci_dev *pdev)
2407 {
2408         struct pci_nic *nic = pci_get_drvdata(pdev);
2409         struct net_device *ndev;
2410         int port;
2411
2412         for (port = 0; port < nic->port_num; port++) {
2413                 ndev = nic->priv[port]->ndev;
2414                 unregister_netdev(ndev);
2415                 free_netdev(ndev);
2416         }
2417
2418         /*bdx_hw_reset_direct(nic->regs); */
2419 #ifdef BDX_MSI
2420         if (nic->irq_type == IRQ_MSI)
2421                 pci_disable_msi(pdev);
2422 #endif
2423
2424         iounmap(nic->regs);
2425         pci_release_regions(pdev);
2426         pci_disable_device(pdev);
2427         vfree(nic);
2428
2429         RET();
2430 }
2431
2432 static struct pci_driver bdx_pci_driver = {
2433         .name = BDX_DRV_NAME,
2434         .id_table = bdx_pci_tbl,
2435         .probe = bdx_probe,
2436         .remove = bdx_remove,
2437 };
2438
2439 /*
2440  * print_driver_id - print parameters of the driver build
2441  */
2442 static void __init print_driver_id(void)
2443 {
2444         pr_info("%s, %s\n", BDX_DRV_DESC, BDX_DRV_VERSION);
2445         pr_info("Options: hw_csum %s\n", BDX_MSI_STRING);
2446 }
2447
2448 static int __init bdx_module_init(void)
2449 {
2450         ENTER;
2451         init_txd_sizes();
2452         print_driver_id();
2453         RET(pci_register_driver(&bdx_pci_driver));
2454 }
2455
2456 module_init(bdx_module_init);
2457
2458 static void __exit bdx_module_exit(void)
2459 {
2460         ENTER;
2461         pci_unregister_driver(&bdx_pci_driver);
2462         RET();
2463 }
2464
2465 module_exit(bdx_module_exit);
2466
2467 MODULE_LICENSE("GPL");
2468 MODULE_AUTHOR(DRIVER_AUTHOR);
2469 MODULE_DESCRIPTION(BDX_DRV_DESC);
2470 MODULE_FIRMWARE("tehuti/bdx.bin");