arch/arm/boot/dts/armada-370-rd.dts

   1 /*
   2  * Device Tree file for Marvell Armada 370 Reference Design board
   3  * (RD-88F6710-A1)
   4  *
   5  *  Copied from arch/arm/boot/dts/armada-370-db.dts
   6  *
   7  *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
   8  *
   9  * This file is dual-licensed: you can use it either under the terms
  10  * of the GPL or the X11 license, at your option. Note that this dual
  11  * licensing only applies to this file, and not this project as a
  12  * whole.
  13  *
  14  *  a) This file is free software; you can redistribute it and/or
  15  *     modify it under the terms of the GNU General Public License as
  16  *     published by the Free Software Foundation; either version 2 of the
  17  *     License, or (at your option) any later version.
  18  *
  19  *     This file is distributed in the hope that it will be useful
  20  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  *     GNU General Public License for more details.
  23  *
  24  * Or, alternatively
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  *
  47  * Note: this Device Tree assumes that the bootloader has remapped the
  48  * internal registers to 0xf1000000 (instead of the default
  49  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  50  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  51  * boards were delivered with an older version of the bootloader that
  52  * left internal registers mapped at 0xd0000000. If you are in this
  53  * situation, you should either update your bootloader (preferred
  54  * solution) or the below Device Tree should be adjusted.
  55  */
  56
  57 /dts-v1/;
  58 #include <dt-bindings/input/input.h>
  59 #include <dt-bindings/gpio/gpio.h>
  60 #include "armada-370.dtsi"
  61
  62 / {
  63         model = "Marvell Armada 370 Reference Design";
  64         compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
  65
  66         chosen {
  67                 stdout-path = "serial0:115200n8";
  68         };
  69
  70         memory {
  71                 device_type = "memory";
  72                 reg = <0x00000000 0x20000000>; /* 512 MB */
  73         };
  74
  75         soc {
  76                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  77                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
  78
  79                 pcie-controller {
  80                         status = "okay";
  81
  82                         /* Internal mini-PCIe connector */
  83                         pcie@1,0 {
  84                                 /* Port 0, Lane 0 */
  85                                 status = "okay";
  86                         };
  87
  88                         /* Internal mini-PCIe connector */
  89                         pcie@2,0 {
  90                                 /* Port 1, Lane 0 */
  91                                 status = "okay";
  92                         };
  93                 };
  94
  95                 internal-regs {
  96                         serial@12000 {
  97                                 status = "okay";
  98                         };
  99                         sata@a0000 {
 100                                 nr-ports = <2>;
 101                                 status = "okay";
 102                         };
 103
 104                         mdio {
 105                                 pinctrl-0 = <&mdio_pins>;
 106                                 pinctrl-names = "default";
 107                                 phy0: ethernet-phy@0 {
 108                                         reg = <0>;
 109                                 };
 110                         };
 111
 112                         ethernet@70000 {
 113                                 status = "okay";
 114                                 phy = <&phy0>;
 115                                 phy-mode = "sgmii";
 116                         };
 117                         ethernet@74000 {
 118                                 pinctrl-0 = <&ge1_rgmii_pins>;
 119                                 pinctrl-names = "default";
 120                                 status = "okay";
 121                                 phy-mode = "rgmii-id";
 122                                 fixed-link {
 123                                            speed = <1000>;
 124                                            full-duplex;
 125                                 };
 126                         };
 127
 128                         mvsdio@d4000 {
 129                                 pinctrl-0 = <&sdio_pins1>;
 130                                 pinctrl-names = "default";
 131                                 status = "okay";
 132                                 /* No CD or WP GPIOs */
 133                                 broken-cd;
 134                         };
 135
 136                         usb@50000 {
 137                                 status = "okay";
 138                         };
 139
 140                         usb@51000 {
 141                                 status = "okay";
 142                         };
 143
 144                         gpio-keys {
 145                                 compatible = "gpio-keys";
 146                                 #address-cells = <1>;
 147                                 #size-cells = <0>;
 148                                 button@1 {
 149                                         label = "Software Button";
 150                                         linux,code = <KEY_POWER>;
 151                                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 152                                 };
 153                         };
 154
 155                         gpio-fan {
 156                                 compatible = "gpio-fan";
 157                                 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 158                                 gpio-fan,speed-map = <0 0 3000 1>;
 159                                 pinctrl-0 = <&fan_pins>;
 160                                 pinctrl-names = "default";
 161                         };
 162
 163                         gpio_leds {
 164                                 compatible = "gpio-leds";
 165                                 pinctrl-names = "default";
 166                                 pinctrl-0 = <&led_pins>;
 167
 168                                 sw_led {
 169                                         label = "370rd:green:sw";
 170                                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 171                                         default-state = "keep";
 172                                 };
 173                         };
 174
 175                         nand@d0000 {
 176                                 status = "okay";
 177                                 num-cs = <1>;
 178                                 marvell,nand-keep-config;
 179                                 marvell,nand-enable-arbiter;
 180                                 nand-on-flash-bbt;
 181
 182                                 partition@0 {
 183                                         label = "U-Boot";
 184                                         reg = <0 0x800000>;
 185                                 };
 186                                 partition@800000 {
 187                                         label = "Linux";
 188                                         reg = <0x800000 0x800000>;
 189                                 };
 190                                 partition@1000000 {
 191                                         label = "Filesystem";
 192                                         reg = <0x1000000 0x3f000000>;
 193                                 };
 194                         };
 195                 };
 196         };
 197
 198         dsa@0 {
 199                 compatible = "marvell,dsa";
 200                 #address-cells = <2>;
 201                 #size-cells = <0>;
 202
 203                 dsa,ethernet = <&eth1>;
 204                 dsa,mii-bus = <&mdio>;
 205
 206                 switch@0 {
 207                         #address-cells = <1>;
 208                         #size-cells = <0>;
 209                         reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */
 210
 211                         port@0 {
 212                                 reg = <0>;
 213                                 label = "lan0";
 214                         };
 215
 216                         port@1 {
 217                                reg = <1>;
 218                                label = "lan1";
 219                         };
 220
 221                         port@2 {
 222                                reg = <2>;
 223                                label = "lan2";
 224                         };
 225
 226                         port@3 {
 227                                reg = <3>;
 228                                label = "lan3";
 229                         };
 230
 231                         port@5 {
 232                               reg = <5>;
 233                               label = "cpu";
 234                         };
 235                 };
 236          };
 237  };
 238
 239 &pinctrl {
 240         fan_pins: fan-pins {
 241                 marvell,pins = "mpp8";
 242                 marvell,function = "gpio";
 243         };
 244
 245         led_pins: led-pins {
 246                 marvell,pins = "mpp32";
 247                 marvell,function = "gpio";
 248         };
 249 };