2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/dra.h>
13 #include "skeleton.dtsi"
15 #define MAX_SOURCES 400
21 compatible = "ti,dra7xx";
22 interrupt-parent = <&crossbar_mpu>;
40 ethernet0 = &cpsw_emac0;
41 ethernet1 = &cpsw_emac1;
47 compatible = "arm,armv7-timer";
48 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
49 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
50 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
51 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
52 interrupt-parent = <&gic>;
55 gic: interrupt-controller@48211000 {
56 compatible = "arm,cortex-a15-gic";
58 #interrupt-cells = <3>;
59 reg = <0x48211000 0x1000>,
63 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
64 interrupt-parent = <&gic>;
67 wakeupgen: interrupt-controller@48281000 {
68 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
70 #interrupt-cells = <3>;
71 reg = <0x48281000 0x1000>;
72 interrupt-parent = <&gic>;
76 * The soc node represents the soc top level view. It is used for IPs
77 * that are not memory mapped in the MPU view or for the MPU itself.
80 compatible = "ti,omap-infra";
82 compatible = "ti,omap5-mpu";
88 * XXX: Use a flat representation of the SOC interconnect.
89 * The real OMAP interconnect network is quite complex.
90 * Since it will not bring real advantage to represent that in DT for
91 * the moment, just use a fake OCP bus entry to represent the whole bus
95 compatible = "ti,dra7-l3-noc", "simple-bus";
99 ti,hwmods = "l3_main_1", "l3_main_2";
100 reg = <0x44000000 0x1000000>,
102 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
103 <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
105 l4_cfg: l4@4a000000 {
106 compatible = "ti,dra7-l4-cfg", "simple-bus";
107 #address-cells = <1>;
109 ranges = <0 0x4a000000 0x22c000>;
112 compatible = "ti,dra7-scm-core", "simple-bus";
113 reg = <0x2000 0x2000>;
114 #address-cells = <1>;
116 ranges = <0 0x2000 0x2000>;
118 scm_conf: scm_conf@0 {
119 compatible = "syscon", "simple-bus";
121 #address-cells = <1>;
124 pbias_regulator: pbias_regulator {
125 compatible = "ti,pbias-omap";
127 syscon = <&scm_conf>;
128 pbias_mmc_reg: pbias_mmc_omap5 {
129 regulator-name = "pbias_mmc_omap5";
130 regulator-min-microvolt = <1800000>;
131 regulator-max-microvolt = <3000000>;
135 scm_conf_clocks: clocks {
136 #address-cells = <1>;
141 dra7_pmx_core: pinmux@1400 {
142 compatible = "ti,dra7-padconf",
144 reg = <0x1400 0x0468>;
145 #address-cells = <1>;
147 #interrupt-cells = <1>;
148 interrupt-controller;
149 pinctrl-single,register-width = <32>;
150 pinctrl-single,function-mask = <0x3fffffff>;
153 scm_conf1: scm_conf@1c04 {
154 compatible = "syscon";
155 reg = <0x1c04 0x0020>;
159 cm_core_aon: cm_core_aon@5000 {
160 compatible = "ti,dra7-cm-core-aon";
161 reg = <0x5000 0x2000>;
163 cm_core_aon_clocks: clocks {
164 #address-cells = <1>;
168 cm_core_aon_clockdomains: clockdomains {
172 cm_core: cm_core@8000 {
173 compatible = "ti,dra7-cm-core";
174 reg = <0x8000 0x3000>;
176 cm_core_clocks: clocks {
177 #address-cells = <1>;
181 cm_core_clockdomains: clockdomains {
186 l4_wkup: l4@4ae00000 {
187 compatible = "ti,dra7-l4-wkup", "simple-bus";
188 #address-cells = <1>;
190 ranges = <0 0x4ae00000 0x3f000>;
192 counter32k: counter@4000 {
193 compatible = "ti,omap-counter32k";
195 ti,hwmods = "counter_32k";
199 compatible = "ti,dra7-prm";
200 reg = <0x6000 0x3000>;
201 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
204 #address-cells = <1>;
208 prm_clockdomains: clockdomains {
214 compatible = "simple-bus";
216 #address-cells = <1>;
217 ranges = <0x51000000 0x51000000 0x3000
218 0x0 0x20000000 0x10000000>;
219 pcie1: pcie@51000000 {
220 compatible = "ti,dra7-pcie";
221 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
222 reg-names = "rc_dbics", "ti_conf", "config";
223 interrupts = <0 232 0x4>, <0 233 0x4>;
224 #address-cells = <3>;
227 ranges = <0x81000000 0 0 0x03000 0 0x00010000
228 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
229 #interrupt-cells = <1>;
233 phy-names = "pcie-phy0";
234 interrupt-map-mask = <0 0 0 7>;
235 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
236 <0 0 0 2 &pcie1_intc 2>,
237 <0 0 0 3 &pcie1_intc 3>,
238 <0 0 0 4 &pcie1_intc 4>;
239 pcie1_intc: interrupt-controller {
240 interrupt-controller;
241 #address-cells = <0>;
242 #interrupt-cells = <1>;
248 compatible = "simple-bus";
250 #address-cells = <1>;
251 ranges = <0x51800000 0x51800000 0x3000
252 0x0 0x30000000 0x10000000>;
255 compatible = "ti,dra7-pcie";
256 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
257 reg-names = "rc_dbics", "ti_conf", "config";
258 interrupts = <0 355 0x4>, <0 356 0x4>;
259 #address-cells = <3>;
262 ranges = <0x81000000 0 0 0x03000 0 0x00010000
263 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
264 #interrupt-cells = <1>;
268 phy-names = "pcie-phy0";
269 interrupt-map-mask = <0 0 0 7>;
270 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
271 <0 0 0 2 &pcie2_intc 2>,
272 <0 0 0 3 &pcie2_intc 3>,
273 <0 0 0 4 &pcie2_intc 4>;
274 pcie2_intc: interrupt-controller {
275 interrupt-controller;
276 #address-cells = <0>;
277 #interrupt-cells = <1>;
282 bandgap: bandgap@4a0021e0 {
283 reg = <0x4a0021e0 0xc
289 compatible = "ti,dra752-bandgap";
290 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
291 #thermal-sensor-cells = <1>;
294 sdma: dma-controller@4a056000 {
295 compatible = "ti,omap4430-sdma";
296 reg = <0x4a056000 0x1000>;
297 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
298 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
299 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
300 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
303 dma-requests = <127>;
306 sdma_xbar: dma-router@4a002b78 {
307 compatible = "ti,dra7-dma-crossbar";
308 reg = <0x4a002b78 0xfc>;
310 dma-requests = <205>;
311 ti,dma-safe-map = <0>;
312 dma-masters = <&sdma>;
315 gpio1: gpio@4ae10000 {
316 compatible = "ti,omap4-gpio";
317 reg = <0x4ae10000 0x200>;
318 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
322 interrupt-controller;
323 #interrupt-cells = <2>;
326 gpio2: gpio@48055000 {
327 compatible = "ti,omap4-gpio";
328 reg = <0x48055000 0x200>;
329 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
333 interrupt-controller;
334 #interrupt-cells = <2>;
337 gpio3: gpio@48057000 {
338 compatible = "ti,omap4-gpio";
339 reg = <0x48057000 0x200>;
340 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
344 interrupt-controller;
345 #interrupt-cells = <2>;
348 gpio4: gpio@48059000 {
349 compatible = "ti,omap4-gpio";
350 reg = <0x48059000 0x200>;
351 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
355 interrupt-controller;
356 #interrupt-cells = <2>;
359 gpio5: gpio@4805b000 {
360 compatible = "ti,omap4-gpio";
361 reg = <0x4805b000 0x200>;
362 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
366 interrupt-controller;
367 #interrupt-cells = <2>;
370 gpio6: gpio@4805d000 {
371 compatible = "ti,omap4-gpio";
372 reg = <0x4805d000 0x200>;
373 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
377 interrupt-controller;
378 #interrupt-cells = <2>;
381 gpio7: gpio@48051000 {
382 compatible = "ti,omap4-gpio";
383 reg = <0x48051000 0x200>;
384 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
388 interrupt-controller;
389 #interrupt-cells = <2>;
392 gpio8: gpio@48053000 {
393 compatible = "ti,omap4-gpio";
394 reg = <0x48053000 0x200>;
395 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
399 interrupt-controller;
400 #interrupt-cells = <2>;
403 uart1: serial@4806a000 {
404 compatible = "ti,dra742-uart", "ti,omap4-uart";
405 reg = <0x4806a000 0x100>;
406 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
408 clock-frequency = <48000000>;
410 dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
411 dma-names = "tx", "rx";
414 uart2: serial@4806c000 {
415 compatible = "ti,dra742-uart", "ti,omap4-uart";
416 reg = <0x4806c000 0x100>;
417 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
419 clock-frequency = <48000000>;
421 dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
422 dma-names = "tx", "rx";
425 uart3: serial@48020000 {
426 compatible = "ti,dra742-uart", "ti,omap4-uart";
427 reg = <0x48020000 0x100>;
428 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
430 clock-frequency = <48000000>;
432 dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
433 dma-names = "tx", "rx";
436 uart4: serial@4806e000 {
437 compatible = "ti,dra742-uart", "ti,omap4-uart";
438 reg = <0x4806e000 0x100>;
439 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
441 clock-frequency = <48000000>;
443 dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
444 dma-names = "tx", "rx";
447 uart5: serial@48066000 {
448 compatible = "ti,dra742-uart", "ti,omap4-uart";
449 reg = <0x48066000 0x100>;
450 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
452 clock-frequency = <48000000>;
454 dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
455 dma-names = "tx", "rx";
458 uart6: serial@48068000 {
459 compatible = "ti,dra742-uart", "ti,omap4-uart";
460 reg = <0x48068000 0x100>;
461 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
463 clock-frequency = <48000000>;
465 dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
466 dma-names = "tx", "rx";
469 uart7: serial@48420000 {
470 compatible = "ti,dra742-uart", "ti,omap4-uart";
471 reg = <0x48420000 0x100>;
472 interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
474 clock-frequency = <48000000>;
478 uart8: serial@48422000 {
479 compatible = "ti,dra742-uart", "ti,omap4-uart";
480 reg = <0x48422000 0x100>;
481 interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
483 clock-frequency = <48000000>;
487 uart9: serial@48424000 {
488 compatible = "ti,dra742-uart", "ti,omap4-uart";
489 reg = <0x48424000 0x100>;
490 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
492 clock-frequency = <48000000>;
496 uart10: serial@4ae2b000 {
497 compatible = "ti,dra742-uart", "ti,omap4-uart";
498 reg = <0x4ae2b000 0x100>;
499 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
500 ti,hwmods = "uart10";
501 clock-frequency = <48000000>;
505 mailbox1: mailbox@4a0f4000 {
506 compatible = "ti,omap4-mailbox";
507 reg = <0x4a0f4000 0x200>;
508 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
509 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
510 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
511 ti,hwmods = "mailbox1";
513 ti,mbox-num-users = <3>;
514 ti,mbox-num-fifos = <8>;
518 mailbox2: mailbox@4883a000 {
519 compatible = "ti,omap4-mailbox";
520 reg = <0x4883a000 0x200>;
521 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
522 <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
523 <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
524 <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
525 ti,hwmods = "mailbox2";
527 ti,mbox-num-users = <4>;
528 ti,mbox-num-fifos = <12>;
532 mailbox3: mailbox@4883c000 {
533 compatible = "ti,omap4-mailbox";
534 reg = <0x4883c000 0x200>;
535 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
536 <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
537 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
538 <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
539 ti,hwmods = "mailbox3";
541 ti,mbox-num-users = <4>;
542 ti,mbox-num-fifos = <12>;
546 mailbox4: mailbox@4883e000 {
547 compatible = "ti,omap4-mailbox";
548 reg = <0x4883e000 0x200>;
549 interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
550 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
551 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
552 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
553 ti,hwmods = "mailbox4";
555 ti,mbox-num-users = <4>;
556 ti,mbox-num-fifos = <12>;
560 mailbox5: mailbox@48840000 {
561 compatible = "ti,omap4-mailbox";
562 reg = <0x48840000 0x200>;
563 interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
564 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
565 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
566 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
567 ti,hwmods = "mailbox5";
569 ti,mbox-num-users = <4>;
570 ti,mbox-num-fifos = <12>;
574 mailbox6: mailbox@48842000 {
575 compatible = "ti,omap4-mailbox";
576 reg = <0x48842000 0x200>;
577 interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
578 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
579 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
580 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
581 ti,hwmods = "mailbox6";
583 ti,mbox-num-users = <4>;
584 ti,mbox-num-fifos = <12>;
588 mailbox7: mailbox@48844000 {
589 compatible = "ti,omap4-mailbox";
590 reg = <0x48844000 0x200>;
591 interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
593 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
594 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
595 ti,hwmods = "mailbox7";
597 ti,mbox-num-users = <4>;
598 ti,mbox-num-fifos = <12>;
602 mailbox8: mailbox@48846000 {
603 compatible = "ti,omap4-mailbox";
604 reg = <0x48846000 0x200>;
605 interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
606 <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
607 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
608 <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
609 ti,hwmods = "mailbox8";
611 ti,mbox-num-users = <4>;
612 ti,mbox-num-fifos = <12>;
616 mailbox9: mailbox@4885e000 {
617 compatible = "ti,omap4-mailbox";
618 reg = <0x4885e000 0x200>;
619 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
620 <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
621 <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
622 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
623 ti,hwmods = "mailbox9";
625 ti,mbox-num-users = <4>;
626 ti,mbox-num-fifos = <12>;
630 mailbox10: mailbox@48860000 {
631 compatible = "ti,omap4-mailbox";
632 reg = <0x48860000 0x200>;
633 interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
634 <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
635 <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
636 <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
637 ti,hwmods = "mailbox10";
639 ti,mbox-num-users = <4>;
640 ti,mbox-num-fifos = <12>;
644 mailbox11: mailbox@48862000 {
645 compatible = "ti,omap4-mailbox";
646 reg = <0x48862000 0x200>;
647 interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
648 <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
649 <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
650 <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
651 ti,hwmods = "mailbox11";
653 ti,mbox-num-users = <4>;
654 ti,mbox-num-fifos = <12>;
658 mailbox12: mailbox@48864000 {
659 compatible = "ti,omap4-mailbox";
660 reg = <0x48864000 0x200>;
661 interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
662 <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
663 <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
664 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
665 ti,hwmods = "mailbox12";
667 ti,mbox-num-users = <4>;
668 ti,mbox-num-fifos = <12>;
672 mailbox13: mailbox@48802000 {
673 compatible = "ti,omap4-mailbox";
674 reg = <0x48802000 0x200>;
675 interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
676 <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
677 <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
678 <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
679 ti,hwmods = "mailbox13";
681 ti,mbox-num-users = <4>;
682 ti,mbox-num-fifos = <12>;
686 timer1: timer@4ae18000 {
687 compatible = "ti,omap5430-timer";
688 reg = <0x4ae18000 0x80>;
689 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
690 ti,hwmods = "timer1";
694 timer2: timer@48032000 {
695 compatible = "ti,omap5430-timer";
696 reg = <0x48032000 0x80>;
697 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
698 ti,hwmods = "timer2";
701 timer3: timer@48034000 {
702 compatible = "ti,omap5430-timer";
703 reg = <0x48034000 0x80>;
704 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
705 ti,hwmods = "timer3";
708 timer4: timer@48036000 {
709 compatible = "ti,omap5430-timer";
710 reg = <0x48036000 0x80>;
711 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
712 ti,hwmods = "timer4";
715 timer5: timer@48820000 {
716 compatible = "ti,omap5430-timer";
717 reg = <0x48820000 0x80>;
718 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
719 ti,hwmods = "timer5";
722 timer6: timer@48822000 {
723 compatible = "ti,omap5430-timer";
724 reg = <0x48822000 0x80>;
725 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
726 ti,hwmods = "timer6";
729 timer7: timer@48824000 {
730 compatible = "ti,omap5430-timer";
731 reg = <0x48824000 0x80>;
732 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
733 ti,hwmods = "timer7";
736 timer8: timer@48826000 {
737 compatible = "ti,omap5430-timer";
738 reg = <0x48826000 0x80>;
739 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
740 ti,hwmods = "timer8";
743 timer9: timer@4803e000 {
744 compatible = "ti,omap5430-timer";
745 reg = <0x4803e000 0x80>;
746 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
747 ti,hwmods = "timer9";
750 timer10: timer@48086000 {
751 compatible = "ti,omap5430-timer";
752 reg = <0x48086000 0x80>;
753 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
754 ti,hwmods = "timer10";
757 timer11: timer@48088000 {
758 compatible = "ti,omap5430-timer";
759 reg = <0x48088000 0x80>;
760 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
761 ti,hwmods = "timer11";
764 timer13: timer@48828000 {
765 compatible = "ti,omap5430-timer";
766 reg = <0x48828000 0x80>;
767 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
768 ti,hwmods = "timer13";
772 timer14: timer@4882a000 {
773 compatible = "ti,omap5430-timer";
774 reg = <0x4882a000 0x80>;
775 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
776 ti,hwmods = "timer14";
780 timer15: timer@4882c000 {
781 compatible = "ti,omap5430-timer";
782 reg = <0x4882c000 0x80>;
783 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
784 ti,hwmods = "timer15";
788 timer16: timer@4882e000 {
789 compatible = "ti,omap5430-timer";
790 reg = <0x4882e000 0x80>;
791 interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
792 ti,hwmods = "timer16";
797 compatible = "ti,omap3-wdt";
798 reg = <0x4ae14000 0x80>;
799 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
800 ti,hwmods = "wd_timer2";
803 hwspinlock: spinlock@4a0f6000 {
804 compatible = "ti,omap4-hwspinlock";
805 reg = <0x4a0f6000 0x1000>;
806 ti,hwmods = "spinlock";
811 compatible = "ti,omap5-dmm";
812 reg = <0x4e000000 0x800>;
813 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
818 compatible = "ti,omap4-i2c";
819 reg = <0x48070000 0x100>;
820 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
821 #address-cells = <1>;
828 compatible = "ti,omap4-i2c";
829 reg = <0x48072000 0x100>;
830 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
831 #address-cells = <1>;
838 compatible = "ti,omap4-i2c";
839 reg = <0x48060000 0x100>;
840 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
841 #address-cells = <1>;
848 compatible = "ti,omap4-i2c";
849 reg = <0x4807a000 0x100>;
850 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
851 #address-cells = <1>;
858 compatible = "ti,omap4-i2c";
859 reg = <0x4807c000 0x100>;
860 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
861 #address-cells = <1>;
868 compatible = "ti,omap4-hsmmc";
869 reg = <0x4809c000 0x400>;
870 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
873 ti,needs-special-reset;
874 dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
875 dma-names = "tx", "rx";
877 pbias-supply = <&pbias_mmc_reg>;
881 compatible = "ti,omap4-hsmmc";
882 reg = <0x480b4000 0x400>;
883 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
885 ti,needs-special-reset;
886 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
887 dma-names = "tx", "rx";
892 compatible = "ti,omap4-hsmmc";
893 reg = <0x480ad000 0x400>;
894 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
896 ti,needs-special-reset;
897 dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
898 dma-names = "tx", "rx";
903 compatible = "ti,omap4-hsmmc";
904 reg = <0x480d1000 0x400>;
905 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
907 ti,needs-special-reset;
908 dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
909 dma-names = "tx", "rx";
913 abb_mpu: regulator-abb-mpu {
914 compatible = "ti,abb-v3";
915 regulator-name = "abb_mpu";
916 #address-cells = <0>;
918 clocks = <&sys_clkin1>;
919 ti,settling-time = <50>;
920 ti,clock-cycles = <16>;
922 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
923 <0x4ae06014 0x4>, <0x4a003b20 0xc>,
925 reg-names = "setup-address", "control-address",
926 "int-address", "efuse-address",
928 ti,tranxdone-status-mask = <0x80>;
929 /* LDOVBBMPU_FBB_MUX_CTRL */
930 ti,ldovbb-override-mask = <0x400>;
931 /* LDOVBBMPU_FBB_VSET_OUT */
932 ti,ldovbb-vset-mask = <0x1F>;
935 * NOTE: only FBB mode used but actual vset will
936 * determine final biasing
939 /*uV ABB efuse rbb_m fbb_m vset_m*/
940 1060000 0 0x0 0 0x02000000 0x01F00000
941 1160000 0 0x4 0 0x02000000 0x01F00000
942 1210000 0 0x8 0 0x02000000 0x01F00000
946 abb_ivahd: regulator-abb-ivahd {
947 compatible = "ti,abb-v3";
948 regulator-name = "abb_ivahd";
949 #address-cells = <0>;
951 clocks = <&sys_clkin1>;
952 ti,settling-time = <50>;
953 ti,clock-cycles = <16>;
955 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
956 <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
958 reg-names = "setup-address", "control-address",
959 "int-address", "efuse-address",
961 ti,tranxdone-status-mask = <0x40000000>;
962 /* LDOVBBIVA_FBB_MUX_CTRL */
963 ti,ldovbb-override-mask = <0x400>;
964 /* LDOVBBIVA_FBB_VSET_OUT */
965 ti,ldovbb-vset-mask = <0x1F>;
968 * NOTE: only FBB mode used but actual vset will
969 * determine final biasing
972 /*uV ABB efuse rbb_m fbb_m vset_m*/
973 1055000 0 0x0 0 0x02000000 0x01F00000
974 1150000 0 0x4 0 0x02000000 0x01F00000
975 1250000 0 0x8 0 0x02000000 0x01F00000
979 abb_dspeve: regulator-abb-dspeve {
980 compatible = "ti,abb-v3";
981 regulator-name = "abb_dspeve";
982 #address-cells = <0>;
984 clocks = <&sys_clkin1>;
985 ti,settling-time = <50>;
986 ti,clock-cycles = <16>;
988 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
989 <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
991 reg-names = "setup-address", "control-address",
992 "int-address", "efuse-address",
994 ti,tranxdone-status-mask = <0x20000000>;
995 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
996 ti,ldovbb-override-mask = <0x400>;
997 /* LDOVBBDSPEVE_FBB_VSET_OUT */
998 ti,ldovbb-vset-mask = <0x1F>;
1001 * NOTE: only FBB mode used but actual vset will
1002 * determine final biasing
1005 /*uV ABB efuse rbb_m fbb_m vset_m*/
1006 1055000 0 0x0 0 0x02000000 0x01F00000
1007 1150000 0 0x4 0 0x02000000 0x01F00000
1008 1250000 0 0x8 0 0x02000000 0x01F00000
1012 abb_gpu: regulator-abb-gpu {
1013 compatible = "ti,abb-v3";
1014 regulator-name = "abb_gpu";
1015 #address-cells = <0>;
1017 clocks = <&sys_clkin1>;
1018 ti,settling-time = <50>;
1019 ti,clock-cycles = <16>;
1021 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1022 <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1024 reg-names = "setup-address", "control-address",
1025 "int-address", "efuse-address",
1027 ti,tranxdone-status-mask = <0x10000000>;
1028 /* LDOVBBGPU_FBB_MUX_CTRL */
1029 ti,ldovbb-override-mask = <0x400>;
1030 /* LDOVBBGPU_FBB_VSET_OUT */
1031 ti,ldovbb-vset-mask = <0x1F>;
1034 * NOTE: only FBB mode used but actual vset will
1035 * determine final biasing
1038 /*uV ABB efuse rbb_m fbb_m vset_m*/
1039 1090000 0 0x0 0 0x02000000 0x01F00000
1040 1210000 0 0x4 0 0x02000000 0x01F00000
1041 1280000 0 0x8 0 0x02000000 0x01F00000
1045 mcspi1: spi@48098000 {
1046 compatible = "ti,omap4-mcspi";
1047 reg = <0x48098000 0x200>;
1048 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1049 #address-cells = <1>;
1051 ti,hwmods = "mcspi1";
1052 ti,spi-num-cs = <4>;
1053 dmas = <&sdma_xbar 35>,
1061 dma-names = "tx0", "rx0", "tx1", "rx1",
1062 "tx2", "rx2", "tx3", "rx3";
1063 status = "disabled";
1066 mcspi2: spi@4809a000 {
1067 compatible = "ti,omap4-mcspi";
1068 reg = <0x4809a000 0x200>;
1069 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1070 #address-cells = <1>;
1072 ti,hwmods = "mcspi2";
1073 ti,spi-num-cs = <2>;
1074 dmas = <&sdma_xbar 43>,
1078 dma-names = "tx0", "rx0", "tx1", "rx1";
1079 status = "disabled";
1082 mcspi3: spi@480b8000 {
1083 compatible = "ti,omap4-mcspi";
1084 reg = <0x480b8000 0x200>;
1085 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1086 #address-cells = <1>;
1088 ti,hwmods = "mcspi3";
1089 ti,spi-num-cs = <2>;
1090 dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1091 dma-names = "tx0", "rx0";
1092 status = "disabled";
1095 mcspi4: spi@480ba000 {
1096 compatible = "ti,omap4-mcspi";
1097 reg = <0x480ba000 0x200>;
1098 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1099 #address-cells = <1>;
1101 ti,hwmods = "mcspi4";
1102 ti,spi-num-cs = <1>;
1103 dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1104 dma-names = "tx0", "rx0";
1105 status = "disabled";
1108 qspi: qspi@4b300000 {
1109 compatible = "ti,dra7xxx-qspi";
1110 reg = <0x4b300000 0x100>;
1111 reg-names = "qspi_base";
1112 #address-cells = <1>;
1115 clocks = <&qspi_gfclk_div>;
1116 clock-names = "fck";
1118 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1119 status = "disabled";
1122 omap_control_sata: control-phy@4a002374 {
1123 compatible = "ti,control-phy-pipe3";
1124 reg = <0x4a002374 0x4>;
1125 reg-names = "power";
1126 clocks = <&sys_clkin1>;
1127 clock-names = "sysclk";
1132 compatible = "ti,omap-ocp2scp";
1133 #address-cells = <1>;
1136 reg = <0x4a090000 0x20>;
1137 ti,hwmods = "ocp2scp3";
1138 sata_phy: phy@4A096000 {
1139 compatible = "ti,phy-pipe3-sata";
1140 reg = <0x4A096000 0x80>, /* phy_rx */
1141 <0x4A096400 0x64>, /* phy_tx */
1142 <0x4A096800 0x40>; /* pll_ctrl */
1143 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1144 ctrl-module = <&omap_control_sata>;
1145 clocks = <&sys_clkin1>, <&sata_ref_clk>;
1146 clock-names = "sysclk", "refclk";
1147 syscon-pllreset = <&scm_conf 0x3fc>;
1151 pcie1_phy: pciephy@4a094000 {
1152 compatible = "ti,phy-pipe3-pcie";
1153 reg = <0x4a094000 0x80>, /* phy_rx */
1154 <0x4a094400 0x64>; /* phy_tx */
1155 reg-names = "phy_rx", "phy_tx";
1156 ctrl-module = <&omap_control_pcie1phy>;
1157 clocks = <&dpll_pcie_ref_ck>,
1158 <&dpll_pcie_ref_m2ldo_ck>,
1159 <&optfclk_pciephy1_32khz>,
1160 <&optfclk_pciephy1_clk>,
1161 <&optfclk_pciephy1_div_clk>,
1162 <&optfclk_pciephy_div>;
1163 clock-names = "dpll_ref", "dpll_ref_m2",
1164 "wkupclk", "refclk",
1165 "div-clk", "phy-div";
1169 pcie2_phy: pciephy@4a095000 {
1170 compatible = "ti,phy-pipe3-pcie";
1171 reg = <0x4a095000 0x80>, /* phy_rx */
1172 <0x4a095400 0x64>; /* phy_tx */
1173 reg-names = "phy_rx", "phy_tx";
1174 ctrl-module = <&omap_control_pcie2phy>;
1175 clocks = <&dpll_pcie_ref_ck>,
1176 <&dpll_pcie_ref_m2ldo_ck>,
1177 <&optfclk_pciephy2_32khz>,
1178 <&optfclk_pciephy2_clk>,
1179 <&optfclk_pciephy2_div_clk>,
1180 <&optfclk_pciephy_div>;
1181 clock-names = "dpll_ref", "dpll_ref_m2",
1182 "wkupclk", "refclk",
1183 "div-clk", "phy-div";
1185 status = "disabled";
1189 sata: sata@4a141100 {
1190 compatible = "snps,dwc-ahci";
1191 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1192 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1194 phy-names = "sata-phy";
1195 clocks = <&sata_ref_clk>;
1199 omap_control_pcie1phy: control-phy@0x4a003c40 {
1200 compatible = "ti,control-phy-pcie";
1201 reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
1202 reg-names = "power", "control_sma", "pcie_pcs";
1203 clocks = <&sys_clkin1>;
1204 clock-names = "sysclk";
1207 omap_control_pcie2phy: control-pcie@0x4a003c44 {
1208 compatible = "ti,control-phy-pcie";
1209 reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
1210 reg-names = "power", "control_sma", "pcie_pcs";
1211 clocks = <&sys_clkin1>;
1212 clock-names = "sysclk";
1213 status = "disabled";
1217 compatible = "ti,am3352-rtc";
1218 reg = <0x48838000 0x100>;
1219 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1220 <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1221 ti,hwmods = "rtcss";
1222 clocks = <&sys_32k_ck>;
1225 omap_control_usb2phy1: control-phy@4a002300 {
1226 compatible = "ti,control-phy-usb2";
1227 reg = <0x4a002300 0x4>;
1228 reg-names = "power";
1231 omap_control_usb3phy1: control-phy@4a002370 {
1232 compatible = "ti,control-phy-pipe3";
1233 reg = <0x4a002370 0x4>;
1234 reg-names = "power";
1237 omap_control_usb2phy2: control-phy@0x4a002e74 {
1238 compatible = "ti,control-phy-usb2-dra7";
1239 reg = <0x4a002e74 0x4>;
1240 reg-names = "power";
1245 compatible = "ti,omap-ocp2scp";
1246 #address-cells = <1>;
1249 reg = <0x4a080000 0x20>;
1250 ti,hwmods = "ocp2scp1";
1252 usb2_phy1: phy@4a084000 {
1253 compatible = "ti,omap-usb2";
1254 reg = <0x4a084000 0x400>;
1255 ctrl-module = <&omap_control_usb2phy1>;
1256 clocks = <&usb_phy1_always_on_clk32k>,
1257 <&usb_otg_ss1_refclk960m>;
1258 clock-names = "wkupclk",
1263 usb2_phy2: phy@4a085000 {
1264 compatible = "ti,omap-usb2";
1265 reg = <0x4a085000 0x400>;
1266 ctrl-module = <&omap_control_usb2phy2>;
1267 clocks = <&usb_phy2_always_on_clk32k>,
1268 <&usb_otg_ss2_refclk960m>;
1269 clock-names = "wkupclk",
1274 usb3_phy1: phy@4a084400 {
1275 compatible = "ti,omap-usb3";
1276 reg = <0x4a084400 0x80>,
1279 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1280 ctrl-module = <&omap_control_usb3phy1>;
1281 clocks = <&usb_phy3_always_on_clk32k>,
1283 <&usb_otg_ss1_refclk960m>;
1284 clock-names = "wkupclk",
1291 omap_dwc3_1: omap_dwc3_1@48880000 {
1292 compatible = "ti,dwc3";
1293 ti,hwmods = "usb_otg_ss1";
1294 reg = <0x48880000 0x10000>;
1295 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1296 #address-cells = <1>;
1300 usb1: usb@48890000 {
1301 compatible = "snps,dwc3";
1302 reg = <0x48890000 0x17000>;
1303 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1304 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1305 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1306 interrupt-names = "peripheral",
1309 phys = <&usb2_phy1>, <&usb3_phy1>;
1310 phy-names = "usb2-phy", "usb3-phy";
1312 maximum-speed = "super-speed";
1314 snps,dis_u3_susphy_quirk;
1315 snps,dis_u2_susphy_quirk;
1319 omap_dwc3_2: omap_dwc3_2@488c0000 {
1320 compatible = "ti,dwc3";
1321 ti,hwmods = "usb_otg_ss2";
1322 reg = <0x488c0000 0x10000>;
1323 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1324 #address-cells = <1>;
1328 usb2: usb@488d0000 {
1329 compatible = "snps,dwc3";
1330 reg = <0x488d0000 0x17000>;
1331 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1332 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1333 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1334 interrupt-names = "peripheral",
1337 phys = <&usb2_phy2>;
1338 phy-names = "usb2-phy";
1340 maximum-speed = "high-speed";
1342 snps,dis_u3_susphy_quirk;
1343 snps,dis_u2_susphy_quirk;
1347 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1348 omap_dwc3_3: omap_dwc3_3@48900000 {
1349 compatible = "ti,dwc3";
1350 ti,hwmods = "usb_otg_ss3";
1351 reg = <0x48900000 0x10000>;
1352 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1353 #address-cells = <1>;
1357 status = "disabled";
1358 usb3: usb@48910000 {
1359 compatible = "snps,dwc3";
1360 reg = <0x48910000 0x17000>;
1361 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1362 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1363 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1364 interrupt-names = "peripheral",
1368 maximum-speed = "high-speed";
1370 snps,dis_u3_susphy_quirk;
1371 snps,dis_u2_susphy_quirk;
1376 compatible = "ti,am3352-elm";
1377 reg = <0x48078000 0xfc0>; /* device IO registers */
1378 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1380 status = "disabled";
1383 gpmc: gpmc@50000000 {
1384 compatible = "ti,am3352-gpmc";
1386 reg = <0x50000000 0x37c>; /* device IO registers */
1387 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1389 gpmc,num-waitpins = <2>;
1390 #address-cells = <2>;
1392 status = "disabled";
1396 compatible = "ti,dra7-atl";
1397 reg = <0x4843c000 0x3ff>;
1399 ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1400 <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1401 clocks = <&atl_gfclk_mux>;
1402 clock-names = "fck";
1403 status = "disabled";
1406 crossbar_mpu: crossbar@4a002a48 {
1407 compatible = "ti,irq-crossbar";
1408 reg = <0x4a002a48 0x130>;
1409 interrupt-controller;
1410 interrupt-parent = <&wakeupgen>;
1411 #interrupt-cells = <3>;
1412 ti,max-irqs = <160>;
1413 ti,max-crossbar-sources = <MAX_SOURCES>;
1415 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1416 ti,irqs-skip = <10 133 139 140>;
1417 ti,irqs-safe-map = <0>;
1420 mac: ethernet@4a100000 {
1421 compatible = "ti,dra7-cpsw","ti,cpsw";
1423 clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
1424 clock-names = "fck", "cpts";
1425 cpdma_channels = <8>;
1426 ale_entries = <1024>;
1427 bd_ram_size = <0x2000>;
1430 mac_control = <0x20>;
1433 cpts_clock_mult = <0x80000000>;
1434 cpts_clock_shift = <29>;
1435 reg = <0x48484000 0x1000
1437 #address-cells = <1>;
1445 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1446 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1447 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1448 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1450 status = "disabled";
1452 davinci_mdio: mdio@48485000 {
1453 compatible = "ti,davinci_mdio";
1454 #address-cells = <1>;
1456 ti,hwmods = "davinci_mdio";
1457 bus_freq = <1000000>;
1458 reg = <0x48485000 0x100>;
1461 cpsw_emac0: slave@48480200 {
1462 /* Filled in by U-Boot */
1463 mac-address = [ 00 00 00 00 00 00 ];
1466 cpsw_emac1: slave@48480300 {
1467 /* Filled in by U-Boot */
1468 mac-address = [ 00 00 00 00 00 00 ];
1471 phy_sel: cpsw-phy-sel@4a002554 {
1472 compatible = "ti,dra7xx-cpsw-phy-sel";
1473 reg= <0x4a002554 0x4>;
1474 reg-names = "gmii-sel";
1478 dcan1: can@481cc000 {
1479 compatible = "ti,dra7-d_can";
1480 ti,hwmods = "dcan1";
1481 reg = <0x4ae3c000 0x2000>;
1482 syscon-raminit = <&scm_conf 0x558 0>;
1483 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1484 clocks = <&dcan1_sys_clk_mux>;
1485 status = "disabled";
1488 dcan2: can@481d0000 {
1489 compatible = "ti,dra7-d_can";
1490 ti,hwmods = "dcan2";
1491 reg = <0x48480000 0x2000>;
1492 syscon-raminit = <&scm_conf 0x558 1>;
1493 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1494 clocks = <&sys_clkin1>;
1495 status = "disabled";
1499 compatible = "ti,dra7-dss";
1500 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1501 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1502 status = "disabled";
1503 ti,hwmods = "dss_core";
1504 /* CTRL_CORE_DSS_PLL_CONTROL */
1505 syscon-pll-ctrl = <&scm_conf 0x538>;
1506 #address-cells = <1>;
1511 compatible = "ti,dra7-dispc";
1512 reg = <0x58001000 0x1000>;
1513 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1514 ti,hwmods = "dss_dispc";
1515 clocks = <&dss_dss_clk>;
1516 clock-names = "fck";
1517 /* CTRL_CORE_SMA_SW_1 */
1518 syscon-pol = <&scm_conf 0x534>;
1521 hdmi: encoder@58060000 {
1522 compatible = "ti,dra7-hdmi";
1523 reg = <0x58040000 0x200>,
1526 <0x58060000 0x19000>;
1527 reg-names = "wp", "pll", "phy", "core";
1528 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1529 status = "disabled";
1530 ti,hwmods = "dss_hdmi";
1531 clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
1532 clock-names = "fck", "sys_clk";
1537 thermal_zones: thermal-zones {
1538 #include "omap4-cpu-thermal.dtsi"
1539 #include "omap5-gpu-thermal.dtsi"
1540 #include "omap5-core-thermal.dtsi"
1546 polling-delay = <500>; /* milliseconds */
1549 /include/ "dra7xx-clocks.dtsi"