2 * Samsung's Exynos3250 based Monk board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Monk board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/clock/samsung,s2mps11.h>
22 model = "Samsung Monk board";
23 compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
30 reg = <0x40000000 0x1ff00000>;
34 compatible = "samsung,secure-firmware";
35 reg = <0x0205F000 0x1000>;
39 compatible = "gpio-keys";
42 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_POWER>;
45 debounce-interval = <10>;
50 vemmc_reg: voltage-regulator-0 {
51 compatible = "regulator-fixed";
52 regulator-name = "V_EMMC_2.8V-fixed";
53 regulator-min-microvolt = <2800000>;
54 regulator-max-microvolt = <2800000>;
59 i2c_max77836: i2c-gpio-0 {
60 compatible = "i2c-gpio";
61 gpios = <&gpd0 2 0>, <&gpd0 3 0>;
65 max77836: subpmic@25 {
66 compatible = "maxim,max77836";
67 interrupt-parent = <&gpx1>;
73 compatible = "maxim,max77836-muic";
77 compatible = "maxim,max77836-regulator";
78 safeout_reg: SAFEOUT {
79 regulator-name = "SAFEOUT";
82 charger_reg: CHARGER {
83 regulator-name = "CHARGER";
84 regulator-min-microamp = <45000>;
85 regulator-max-microamp = <475000>;
90 regulator-name = "MOT_2.7V";
91 regulator-min-microvolt = <1100000>;
92 regulator-max-microvolt = <2700000>;
96 regulator-name = "UNUSED_LDO2";
97 regulator-min-microvolt = <800000>;
98 regulator-max-microvolt = <3950000>;
103 compatible = "maxim,max77836-charger";
105 maxim,constant-uvolt = <4350000>;
106 maxim,fast-charge-uamp = <225000>;
107 maxim,eoc-uamp = <7500>;
108 maxim,ovp-uvolt = <6500000>;
114 compatible = "regulator-haptic";
115 haptic-supply = <&motor_reg>;
116 min-microvolt = <1100000>;
117 max-microvolt = <2700000>;
121 cpu_thermal: cpu-thermal {
124 /* Correspond to 500MHz at freq_table */
125 cooling-device = <&cpu0 5 5>;
128 /* Correspond to 200MHz at freq_table */
129 cooling-device = <&cpu0 8 8>;
137 vdd-supply = <&ldo3_reg>;
139 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
140 assigned-clock-rates = <6000000>;
143 compatible = "ntc,ncp15wb473";
144 pullup-uv = <1800000>;
145 pullup-ohm = <100000>;
146 pulldown-ohm = <100000>;
147 io-channels = <&adc 0>;
151 compatible = "ntc,ncp15wb473";
152 pullup-uv = <1800000>;
153 pullup-ohm = <100000>;
154 pulldown-ohm = <100000>;
155 io-channels = <&adc 1>;
160 cpu0-supply = <&buck2_reg>;
168 vusb_d-supply = <&ldo15_reg>;
169 vusb_a-supply = <&ldo12_reg>;
170 dr_mode = "peripheral";
175 #address-cells = <1>;
177 samsung,i2c-sda-delay = <100>;
178 samsung,i2c-slave-addr = <0x10>;
179 samsung,i2c-max-bus-freq = <100000>;
183 compatible = "samsung,s2mps14-pmic";
184 interrupt-parent = <&gpx0>;
189 s2mps14_osc: clocks {
190 compatible = "samsung,s2mps14-clk";
192 clock-output-names = "s2mps14_ap", "unused",
198 regulator-name = "VAP_ALIVE_1.0V";
199 regulator-min-microvolt = <1000000>;
200 regulator-max-microvolt = <1000000>;
205 regulator-name = "VAP_M1_1.2V";
206 regulator-min-microvolt = <1200000>;
207 regulator-max-microvolt = <1200000>;
212 regulator-name = "VCC_AP_1.8V";
213 regulator-min-microvolt = <1800000>;
214 regulator-max-microvolt = <1800000>;
219 regulator-name = "VAP_AVDD_PLL1";
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
226 regulator-name = "VAP_PLL_ISO_1.0V";
227 regulator-min-microvolt = <1000000>;
228 regulator-max-microvolt = <1000000>;
233 regulator-name = "VAP_MIPI_1.0V";
234 regulator-min-microvolt = <1000000>;
235 regulator-max-microvolt = <1000000>;
239 regulator-name = "VAP_AVDD_1.8V";
240 regulator-min-microvolt = <1800000>;
241 regulator-max-microvolt = <1800000>;
246 regulator-name = "VAP_USB_3.0V";
247 regulator-min-microvolt = <3000000>;
248 regulator-max-microvolt = <3000000>;
253 regulator-name = "V_LPDDR_1.2V";
254 regulator-min-microvolt = <1200000>;
255 regulator-max-microvolt = <1200000>;
260 regulator-name = "UNUSED_LDO10";
261 regulator-min-microvolt = <1000000>;
262 regulator-max-microvolt = <1000000>;
266 regulator-name = "V_EMMC_1.8V";
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 samsung,ext-control-gpios = <&gpk0 2 0>;
273 regulator-name = "V_EMMC_2.8V";
274 regulator-min-microvolt = <2800000>;
275 regulator-max-microvolt = <2800000>;
276 samsung,ext-control-gpios = <&gpk0 2 0>;
280 regulator-name = "VSENSOR_2.85V";
281 regulator-min-microvolt = <2850000>;
282 regulator-max-microvolt = <2850000>;
287 regulator-name = "UNUSED_LDO14";
288 regulator-min-microvolt = <1800000>;
289 regulator-max-microvolt = <1800000>;
293 regulator-name = "TSP_AVDD_3.3V";
294 regulator-min-microvolt = <3300000>;
295 regulator-max-microvolt = <3300000>;
299 regulator-name = "LCD_VDD_3.3V";
300 regulator-min-microvolt = <3300000>;
301 regulator-max-microvolt = <3300000>;
305 regulator-name = "UNUSED_LDO17";
306 regulator-min-microvolt = <1800000>;
307 regulator-max-microvolt = <1800000>;
311 regulator-name = "UNUSED_LDO18";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
317 regulator-name = "TSP_VDD_1.8V";
318 regulator-min-microvolt = <1800000>;
319 regulator-max-microvolt = <1800000>;
323 regulator-name = "LCD_VDD_1.8V";
324 regulator-min-microvolt = <1800000>;
325 regulator-max-microvolt = <1800000>;
329 regulator-name = "UNUSED_LDO21";
330 regulator-min-microvolt = <1000000>;
331 regulator-max-microvolt = <1000000>;
335 regulator-name = "UNUSED_LDO22";
336 regulator-min-microvolt = <1000000>;
337 regulator-max-microvolt = <1000000>;
341 regulator-name = "UNUSED_LDO23";
342 regulator-min-microvolt = <1000000>;
343 regulator-max-microvolt = <1000000>;
348 regulator-name = "UNUSED_LDO24";
349 regulator-min-microvolt = <1800000>;
350 regulator-max-microvolt = <1800000>;
354 regulator-name = "UNUSED_LDO25";
355 regulator-min-microvolt = <1800000>;
356 regulator-max-microvolt = <1800000>;
360 regulator-name = "VAP_MIF_1.0V";
361 regulator-min-microvolt = <800000>;
362 regulator-max-microvolt = <900000>;
367 regulator-name = "VAP_ARM_1.0V";
368 regulator-min-microvolt = <850000>;
369 regulator-max-microvolt = <1150000>;
374 regulator-name = "VAP_INT3D_1.0V";
375 regulator-min-microvolt = <850000>;
376 regulator-max-microvolt = <1000000>;
381 regulator-name = "VCC_SUB_1.95V";
382 regulator-min-microvolt = <1950000>;
383 regulator-max-microvolt = <1950000>;
388 regulator-name = "VCC_SUB_1.35V";
389 regulator-min-microvolt = <1350000>;
390 regulator-max-microvolt = <1350000>;
398 #address-cells = <1>;
400 samsung,i2c-sda-delay = <100>;
401 samsung,i2c-slave-addr = <0x10>;
402 samsung,i2c-max-bus-freq = <400000>;
406 compatible = "maxim,max77836-battery";
407 interrupt-parent = <&gpx1>;
418 #address-cells = <1>;
426 card-detect-delay = <200>;
427 vmmc-supply = <&vemmc_reg>;
428 clock-frequency = <100000000>;
429 clock-freq-min-max = <400000 100000000>;
430 samsung,dw-mshc-ciu-div = <1>;
431 samsung,dw-mshc-sdr-timing = <0 1>;
432 samsung,dw-mshc-ddr-timing = <1 2>;
433 pinctrl-names = "default";
434 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
440 assigned-clocks = <&cmu CLK_SCLK_UART0>;
441 assigned-clock-rates = <100000000>;
450 vtmu-supply = <&ldo7_reg>;
455 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
456 clock-names = "rtc", "rtc_src";
464 ppmu_dmc0_3: ppmu-event3-dmc0 {
465 event-name = "ppmu-event3-dmc0";
474 ppmu_dmc1_3: ppmu-event3-dmc1 {
475 event-name = "ppmu-event3-dmc1";
484 ppmu_leftbus_3: ppmu-event3-leftbus {
485 event-name = "ppmu-event3-leftbus";
494 ppmu_rightbus_3: ppmu-event3-rightbus {
495 event-name = "ppmu-event3-rightbus";
501 clock-frequency = <24000000>;
505 pinctrl-names = "default";
506 pinctrl-0 = <&sleep0>;
508 sleep0: sleep-state {
509 PIN_SLP(gpa0-0, INPUT, DOWN);
510 PIN_SLP(gpa0-1, INPUT, DOWN);
511 PIN_SLP(gpa0-2, INPUT, DOWN);
512 PIN_SLP(gpa0-3, INPUT, DOWN);
513 PIN_SLP(gpa0-4, INPUT, DOWN);
514 PIN_SLP(gpa0-5, INPUT, DOWN);
515 PIN_SLP(gpa0-6, INPUT, DOWN);
516 PIN_SLP(gpa0-7, INPUT, DOWN);
518 PIN_SLP(gpa1-0, INPUT, DOWN);
519 PIN_SLP(gpa1-1, INPUT, DOWN);
520 PIN_SLP(gpa1-2, INPUT, DOWN);
521 PIN_SLP(gpa1-3, INPUT, DOWN);
522 PIN_SLP(gpa1-4, INPUT, DOWN);
523 PIN_SLP(gpa1-5, INPUT, DOWN);
525 PIN_SLP(gpb-0, PREV, NONE);
526 PIN_SLP(gpb-1, PREV, NONE);
527 PIN_SLP(gpb-2, PREV, NONE);
528 PIN_SLP(gpb-3, PREV, NONE);
529 PIN_SLP(gpb-4, INPUT, DOWN);
530 PIN_SLP(gpb-5, INPUT, DOWN);
531 PIN_SLP(gpb-6, INPUT, DOWN);
532 PIN_SLP(gpb-7, INPUT, DOWN);
534 PIN_SLP(gpc0-0, INPUT, DOWN);
535 PIN_SLP(gpc0-1, INPUT, DOWN);
536 PIN_SLP(gpc0-2, INPUT, DOWN);
537 PIN_SLP(gpc0-3, INPUT, DOWN);
538 PIN_SLP(gpc0-4, INPUT, DOWN);
540 PIN_SLP(gpc1-0, INPUT, DOWN);
541 PIN_SLP(gpc1-1, INPUT, DOWN);
542 PIN_SLP(gpc1-2, INPUT, DOWN);
543 PIN_SLP(gpc1-3, INPUT, DOWN);
544 PIN_SLP(gpc1-4, INPUT, DOWN);
546 PIN_SLP(gpd0-0, INPUT, DOWN);
547 PIN_SLP(gpd0-1, INPUT, DOWN);
548 PIN_SLP(gpd0-2, INPUT, NONE);
549 PIN_SLP(gpd0-3, INPUT, NONE);
551 PIN_SLP(gpd1-0, INPUT, NONE);
552 PIN_SLP(gpd1-1, INPUT, NONE);
553 PIN_SLP(gpd1-2, INPUT, NONE);
554 PIN_SLP(gpd1-3, INPUT, NONE);
559 pinctrl-names = "default";
560 pinctrl-0 = <&sleep1>;
562 sleep1: sleep-state {
563 PIN_SLP(gpe0-0, PREV, NONE);
564 PIN_SLP(gpe0-1, PREV, NONE);
565 PIN_SLP(gpe0-2, INPUT, DOWN);
566 PIN_SLP(gpe0-3, INPUT, DOWN);
567 PIN_SLP(gpe0-4, PREV, NONE);
568 PIN_SLP(gpe0-5, INPUT, DOWN);
569 PIN_SLP(gpe0-6, INPUT, DOWN);
570 PIN_SLP(gpe0-7, INPUT, DOWN);
572 PIN_SLP(gpe1-0, INPUT, DOWN);
573 PIN_SLP(gpe1-1, PREV, NONE);
574 PIN_SLP(gpe1-2, INPUT, DOWN);
575 PIN_SLP(gpe1-3, INPUT, DOWN);
576 PIN_SLP(gpe1-4, INPUT, DOWN);
577 PIN_SLP(gpe1-5, INPUT, DOWN);
578 PIN_SLP(gpe1-6, INPUT, DOWN);
579 PIN_SLP(gpe1-7, INPUT, NONE);
581 PIN_SLP(gpe2-0, INPUT, NONE);
582 PIN_SLP(gpe2-1, INPUT, NONE);
583 PIN_SLP(gpe2-2, INPUT, NONE);
585 PIN_SLP(gpk0-0, INPUT, DOWN);
586 PIN_SLP(gpk0-1, INPUT, DOWN);
587 PIN_SLP(gpk0-2, OUT0, NONE);
588 PIN_SLP(gpk0-3, INPUT, DOWN);
589 PIN_SLP(gpk0-4, INPUT, DOWN);
590 PIN_SLP(gpk0-5, INPUT, DOWN);
591 PIN_SLP(gpk0-6, INPUT, DOWN);
592 PIN_SLP(gpk0-7, INPUT, DOWN);
594 PIN_SLP(gpk1-0, PREV, NONE);
595 PIN_SLP(gpk1-1, PREV, NONE);
596 PIN_SLP(gpk1-2, INPUT, DOWN);
597 PIN_SLP(gpk1-3, PREV, NONE);
598 PIN_SLP(gpk1-4, PREV, NONE);
599 PIN_SLP(gpk1-5, PREV, NONE);
600 PIN_SLP(gpk1-6, PREV, NONE);
602 PIN_SLP(gpk2-0, INPUT, DOWN);
603 PIN_SLP(gpk2-1, INPUT, DOWN);
604 PIN_SLP(gpk2-2, INPUT, DOWN);
605 PIN_SLP(gpk2-3, INPUT, DOWN);
606 PIN_SLP(gpk2-4, INPUT, DOWN);
607 PIN_SLP(gpk2-5, INPUT, DOWN);
608 PIN_SLP(gpk2-6, INPUT, DOWN);
610 PIN_SLP(gpl0-0, INPUT, DOWN);
611 PIN_SLP(gpl0-1, INPUT, DOWN);
612 PIN_SLP(gpl0-2, INPUT, DOWN);
613 PIN_SLP(gpl0-3, INPUT, DOWN);
615 PIN_SLP(gpm0-0, INPUT, DOWN);
616 PIN_SLP(gpm0-1, INPUT, DOWN);
617 PIN_SLP(gpm0-2, INPUT, DOWN);
618 PIN_SLP(gpm0-3, INPUT, DOWN);
619 PIN_SLP(gpm0-4, INPUT, DOWN);
620 PIN_SLP(gpm0-5, INPUT, DOWN);
621 PIN_SLP(gpm0-6, INPUT, DOWN);
622 PIN_SLP(gpm0-7, INPUT, DOWN);
624 PIN_SLP(gpm1-0, INPUT, DOWN);
625 PIN_SLP(gpm1-1, INPUT, DOWN);
626 PIN_SLP(gpm1-2, INPUT, DOWN);
627 PIN_SLP(gpm1-3, INPUT, DOWN);
628 PIN_SLP(gpm1-4, INPUT, DOWN);
629 PIN_SLP(gpm1-5, INPUT, DOWN);
630 PIN_SLP(gpm1-6, INPUT, DOWN);
632 PIN_SLP(gpm2-0, INPUT, DOWN);
633 PIN_SLP(gpm2-1, INPUT, DOWN);
634 PIN_SLP(gpm2-2, INPUT, DOWN);
635 PIN_SLP(gpm2-3, INPUT, DOWN);
636 PIN_SLP(gpm2-4, INPUT, DOWN);
638 PIN_SLP(gpm3-0, INPUT, DOWN);
639 PIN_SLP(gpm3-1, INPUT, DOWN);
640 PIN_SLP(gpm3-2, INPUT, DOWN);
641 PIN_SLP(gpm3-3, INPUT, DOWN);
642 PIN_SLP(gpm3-4, INPUT, DOWN);
643 PIN_SLP(gpm3-5, INPUT, DOWN);
644 PIN_SLP(gpm3-6, INPUT, DOWN);
645 PIN_SLP(gpm3-7, INPUT, DOWN);
647 PIN_SLP(gpm4-0, INPUT, DOWN);
648 PIN_SLP(gpm4-1, INPUT, DOWN);
649 PIN_SLP(gpm4-2, INPUT, DOWN);
650 PIN_SLP(gpm4-3, INPUT, DOWN);
651 PIN_SLP(gpm4-4, INPUT, DOWN);
652 PIN_SLP(gpm4-5, INPUT, DOWN);
653 PIN_SLP(gpm4-6, INPUT, DOWN);
654 PIN_SLP(gpm4-7, INPUT, DOWN);