arch/arm/boot/dts/omap3-igep.dtsi

   1 /*
   2  * Common device tree for IGEP boards based on AM/DM37x
   3  *
   4  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
   5  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11 /dts-v1/;
  12
  13 #include "omap36xx.dtsi"
  14
  15 / {
  16         memory {
  17                 device_type = "memory";
  18                 reg = <0x80000000 0x20000000>; /* 512 MB */
  19         };
  20
  21         sound {
  22                 compatible = "ti,omap-twl4030";
  23                 ti,model = "igep2";
  24                 ti,mcbsp = <&mcbsp2>;
  25         };
  26
  27         vdd33: regulator-vdd33 {
  28                 compatible = "regulator-fixed";
  29                 regulator-name = "vdd33";
  30                 regulator-always-on;
  31         };
  32
  33 };
  34
  35 &omap3_pmx_core {
  36         uart1_pins: pinmux_uart1_pins {
  37                 pinctrl-single,pins = <
  38                         0x152 (PIN_INPUT | MUX_MODE0)           /* uart1_rx.uart1_rx */
  39                         0x14c (PIN_OUTPUT |MUX_MODE0)           /* uart1_tx.uart1_tx */
  40                 >;
  41         };
  42
  43         uart3_pins: pinmux_uart3_pins {
  44                 pinctrl-single,pins = <
  45                         0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx.uart3_rx */
  46                         0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx.uart3_tx */
  47                 >;
  48         };
  49
  50         mcbsp2_pins: pinmux_mcbsp2_pins {
  51                 pinctrl-single,pins = <
  52                         0x10c (PIN_INPUT | MUX_MODE0)           /* mcbsp2_fsx.mcbsp2_fsx */
  53                         0x10e (PIN_INPUT | MUX_MODE0)           /* mcbsp2_clkx.mcbsp2_clkx */
  54                         0x110 (PIN_INPUT | MUX_MODE0)           /* mcbsp2_dr.mcbsp2.dr */
  55                         0x112 (PIN_OUTPUT | MUX_MODE0)          /* mcbsp2_dx.mcbsp2_dx */
  56                 >;
  57         };
  58
  59         mmc1_pins: pinmux_mmc1_pins {
  60                 pinctrl-single,pins = <
  61                         0x114 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_clk.sdmmc1_clk */
  62                         0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd.sdmmc1_cmd */
  63                         0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0.sdmmc1_dat0 */
  64                         0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1.sdmmc1_dat1 */
  65                         0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2.sdmmc1_dat2 */
  66                         0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3.sdmmc1_dat3 */
  67                 >;
  68         };
  69
  70         mmc2_pins: pinmux_mmc2_pins {
  71                 pinctrl-single,pins = <
  72                         0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
  73                         0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
  74                         0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0.sdmmc2_dat0 */
  75                         0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1.sdmmc2_dat1 */
  76                         0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2.sdmmc2_dat2 */
  77                         0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3.sdmmc2_dat3 */
  78                 >;
  79         };
  80
  81         smsc9221_pins: pinmux_smsc9221_pins {
  82                 pinctrl-single,pins = <
  83                         0x1a2 (PIN_INPUT | MUX_MODE4)           /* mcspi1_cs2.gpio_176 */
  84                 >;
  85         };
  86
  87         i2c1_pins: pinmux_i2c1_pins {
  88                 pinctrl-single,pins = <
  89                         0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
  90                         0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
  91                 >;
  92         };
  93
  94         i2c3_pins: pinmux_i2c3_pins {
  95                 pinctrl-single,pins = <
  96                         0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
  97                         0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
  98                 >;
  99         };
 100 };
 101
 102 &gpmc {
 103         nand@0,0 {
 104                 linux,mtd-name= "micron,mt29c4g96maz";
 105                 reg = <0 0 4>;  /* CS0, offset 0, IO size 4 */
 106                 nand-bus-width = <16>;
 107                 gpmc,device-width = <2>;
 108                 ti,nand-ecc-opt = "bch8";
 109
 110                 gpmc,sync-clk-ps = <0>;
 111                 gpmc,cs-on-ns = <0>;
 112                 gpmc,cs-rd-off-ns = <44>;
 113                 gpmc,cs-wr-off-ns = <44>;
 114                 gpmc,adv-on-ns = <6>;
 115                 gpmc,adv-rd-off-ns = <34>;
 116                 gpmc,adv-wr-off-ns = <44>;
 117                 gpmc,we-off-ns = <40>;
 118                 gpmc,oe-off-ns = <54>;
 119                 gpmc,access-ns = <64>;
 120                 gpmc,rd-cycle-ns = <82>;
 121                 gpmc,wr-cycle-ns = <82>;
 122                 gpmc,wr-access-ns = <40>;
 123                 gpmc,wr-data-mux-bus-ns = <0>;
 124
 125                 #address-cells = <1>;
 126                 #size-cells = <1>;
 127
 128                 partition@0 {
 129                         label = "SPL";
 130                         reg = <0 0x100000>;
 131                 };
 132                 partition@80000 {
 133                         label = "U-Boot";
 134                         reg = <0x100000 0x180000>;
 135                 };
 136                 partition@1c0000 {
 137                         label = "Environment";
 138                         reg = <0x280000 0x100000>;
 139                 };
 140                 partition@280000 {
 141                         label = "Kernel";
 142                         reg = <0x380000 0x300000>;
 143                 };
 144                 partition@780000 {
 145                         label = "Filesystem";
 146                         reg = <0x680000 0x1f980000>;
 147                 };
 148         };
 149 };
 150
 151 &i2c1 {
 152         pinctrl-names = "default";
 153         pinctrl-0 = <&i2c1_pins>;
 154         clock-frequency = <2600000>;
 155
 156         twl: twl@48 {
 157                 reg = <0x48>;
 158                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 159                 interrupt-parent = <&intc>;
 160
 161                 twl_audio: audio {
 162                         compatible = "ti,twl4030-audio";
 163                         codec {
 164                               };
 165                 };
 166         };
 167 };
 168
 169 #include "twl4030.dtsi"
 170 #include "twl4030_omap3.dtsi"
 171
 172 &i2c3 {
 173         pinctrl-names = "default";
 174         pinctrl-0 = <&i2c3_pins>;
 175 };
 176
 177 &mcbsp2 {
 178         pinctrl-names = "default";
 179         pinctrl-0 = <&mcbsp2_pins>;
 180         status = "okay";
 181 };
 182
 183 &mmc1 {
 184       pinctrl-names = "default";
 185       pinctrl-0 = <&mmc1_pins>;
 186       vmmc-supply = <&vmmc1>;
 187       vmmc_aux-supply = <&vsim>;
 188       bus-width = <4>;
 189 };
 190
 191 &mmc3 {
 192         status = "disabled";
 193 };
 194
 195 &uart1 {
 196        pinctrl-names = "default";
 197        pinctrl-0 = <&uart1_pins>;
 198 };
 199
 200 &uart3 {
 201        pinctrl-names = "default";
 202        pinctrl-0 = <&uart3_pins>;
 203 };
 204
 205 &twl_gpio {
 206         ti,use-leds;
 207 };
 208
 209 &usb_otg_hs {
 210         interface-type = <0>;
 211         usb-phy = <&usb2_phy>;
 212         phys = <&usb2_phy>;
 213         phy-names = "usb2-phy";
 214         mode = <3>;
 215         power = <50>;
 216 };