2 * Device Tree Source for the Lager board
4 * Copyright (C) 2013-2014 Renesas Solutions Corp.
5 * Copyright (C) 2014 Cogent Embedded, Inc.
7 * This file is licensed under the terms of the GNU General Public License
8 * version 2. This program is licensed "as is" without any warranty of any
9 * kind, whether express or implied.
19 * This command is required when Playback/Capture
21 * amixer set "LINEOUT Mixer DACL" on
22 * amixer set "DVC Out" 100%
23 * amixer set "DVC In" 100%
27 * amixer set "DVC Out Mute" on
28 * amixer set "DVC In Mute" on
30 * You can use Volume Ramp
32 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
33 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
34 * amixer set "DVC Out Ramp" on
36 * amixer set "DVC Out" 80% // Volume Down
37 * amixer set "DVC Out" 100% // Volume Up
41 #include "r8a7790.dtsi"
42 #include <dt-bindings/gpio/gpio.h>
43 #include <dt-bindings/input/input.h>
47 compatible = "renesas,lager", "renesas,r8a7790";
55 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
56 stdout-path = &scifa0;
60 device_type = "memory";
61 reg = <0 0x40000000 0 0x40000000>;
65 device_type = "memory";
66 reg = <1 0x40000000 0 0xc0000000>;
75 compatible = "gpio-keys";
81 debounce-interval = <20>;
82 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
88 debounce-interval = <20>;
89 gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
95 debounce-interval = <20>;
96 gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
102 debounce-interval = <20>;
103 gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
108 compatible = "gpio-leds";
110 gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
113 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
116 gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
120 fixedregulator3v3: fixedregulator@0 {
121 compatible = "regulator-fixed";
122 regulator-name = "fixed-3.3V";
123 regulator-min-microvolt = <3300000>;
124 regulator-max-microvolt = <3300000>;
129 vcc_sdhi0: regulator@1 {
130 compatible = "regulator-fixed";
132 regulator-name = "SDHI0 Vcc";
133 regulator-min-microvolt = <3300000>;
134 regulator-max-microvolt = <3300000>;
136 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
140 vccq_sdhi0: regulator@2 {
141 compatible = "regulator-gpio";
143 regulator-name = "SDHI0 VccQ";
144 regulator-min-microvolt = <1800000>;
145 regulator-max-microvolt = <3300000>;
147 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
153 vcc_sdhi2: regulator@3 {
154 compatible = "regulator-fixed";
156 regulator-name = "SDHI2 Vcc";
157 regulator-min-microvolt = <3300000>;
158 regulator-max-microvolt = <3300000>;
160 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
164 vccq_sdhi2: regulator@4 {
165 compatible = "regulator-gpio";
167 regulator-name = "SDHI2 VccQ";
168 regulator-min-microvolt = <1800000>;
169 regulator-max-microvolt = <3300000>;
171 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
178 compatible = "simple-audio-card";
180 simple-audio-card,format = "left_j";
181 simple-audio-card,bitclock-master = <&sndcodec>;
182 simple-audio-card,frame-master = <&sndcodec>;
184 sndcpu: simple-audio-card,cpu {
185 sound-dai = <&rcar_sound>;
188 sndcodec: simple-audio-card,codec {
189 sound-dai = <&ak4643>;
190 system-clock-frequency = <11289600>;
195 compatible = "adi,adv7123";
198 #address-cells = <1>;
203 adv7123_in: endpoint {
204 remote-endpoint = <&du_out_rgb>;
209 adv7123_out: endpoint {
210 remote-endpoint = <&vga_in>;
217 compatible = "vga-connector";
221 remote-endpoint = <&adv7123_out>;
227 compatible = "hdmi-connector";
232 remote-endpoint = <&adv7511_out>;
238 compatible = "fixed-clock";
240 clock-frequency = <148500000>;
244 compatible = "fixed-clock";
246 clock-frequency = <148500000>;
251 pinctrl-0 = <&du_pins>;
252 pinctrl-names = "default";
255 clocks = <&mstp7_clks R8A7790_CLK_DU0>,
256 <&mstp7_clks R8A7790_CLK_DU1>,
257 <&mstp7_clks R8A7790_CLK_DU2>,
258 <&mstp7_clks R8A7790_CLK_LVDS0>,
259 <&mstp7_clks R8A7790_CLK_LVDS1>,
260 <&x13_clk>, <&x2_clk>;
261 clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
262 "dclkin.0", "dclkin.1";
267 remote-endpoint = <&adv7123_in>;
272 remote-endpoint = <&adv7511_in>;
276 lvds_connector: endpoint {
283 clock-frequency = <20000000>;
288 renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
289 renesas,function = "du";
292 scifa0_pins: serial0 {
293 renesas,groups = "scifa0_data";
294 renesas,function = "scifa0";
298 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
299 renesas,function = "eth";
303 renesas,groups = "intc_irq0";
304 renesas,function = "intc";
307 scifa1_pins: serial1 {
308 renesas,groups = "scifa1_data";
309 renesas,function = "scifa1";
313 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
314 renesas,function = "sdhi0";
318 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
319 renesas,function = "sdhi2";
323 renesas,groups = "mmc1_data8", "mmc1_ctrl";
324 renesas,function = "mmc1";
328 renesas,groups = "qspi_ctrl", "qspi_data4";
329 renesas,function = "qspi";
333 renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
335 renesas,function = "msiof1";
339 renesas,groups = "iic1";
340 renesas,function = "iic1";
344 renesas,groups = "iic2";
345 renesas,function = "iic2";
349 renesas,groups = "iic3";
350 renesas,function = "iic3";
354 renesas,groups = "usb0_ovc_vbus";
355 renesas,function = "usb0";
359 renesas,groups = "usb0";
360 renesas,function = "usb0";
364 renesas,groups = "usb1";
365 renesas,function = "usb1";
369 renesas,groups = "usb2";
370 renesas,function = "usb2";
374 renesas,groups = "vin1_data8", "vin1_clk";
375 renesas,function = "vin1";
379 renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
380 renesas,function = "ssi";
383 sound_clk_pins: sound_clk {
384 renesas,groups = "audio_clk_a";
385 renesas,function = "audio_clk";
390 pinctrl-0 = <ðer_pins &phy1_pins>;
391 pinctrl-names = "default";
393 phy-handle = <&phy1>;
394 renesas,ether-link-active-low;
397 phy1: ethernet-phy@1 {
399 interrupt-parent = <&irqc0>;
400 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
401 micrel,led-mode = <1>;
410 pinctrl-0 = <&mmc1_pins>;
411 pinctrl-names = "default";
413 vmmc-supply = <&fixedregulator3v3>;
424 pinctrl-0 = <&qspi_pins>;
425 pinctrl-names = "default";
430 #address-cells = <1>;
432 compatible = "spansion,s25fl512s", "jedec,spi-nor";
434 spi-max-frequency = <30000000>;
435 spi-tx-bus-width = <4>;
436 spi-rx-bus-width = <4>;
443 reg = <0x00000000 0x00040000>;
448 reg = <0x00040000 0x00400000>;
453 reg = <0x00440000 0x03bc0000>;
459 pinctrl-0 = <&scifa0_pins>;
460 pinctrl-names = "default";
466 pinctrl-0 = <&scifa1_pins>;
467 pinctrl-names = "default";
473 pinctrl-0 = <&msiof1_pins>;
474 pinctrl-names = "default";
479 compatible = "renesas,r2a11302ft";
481 spi-max-frequency = <6000000>;
488 pinctrl-0 = <&sdhi0_pins>;
489 pinctrl-names = "default";
491 vmmc-supply = <&vcc_sdhi0>;
492 vqmmc-supply = <&vccq_sdhi0>;
493 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
498 pinctrl-0 = <&sdhi2_pins>;
499 pinctrl-names = "default";
501 vmmc-supply = <&vcc_sdhi2>;
502 vqmmc-supply = <&vccq_sdhi2>;
503 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
508 cpu0-supply = <&vdd_dvfs>;
517 pinctrl-0 = <&iic1_pins>;
518 pinctrl-names = "default";
523 pinctrl-0 = <&iic2_pins>;
524 pinctrl-names = "default";
526 clock-frequency = <100000>;
529 compatible = "asahi-kasei,ak4643";
530 #sound-dai-cells = <0>;
535 compatible = "adi,adv7180";
542 remote-endpoint = <&vin1ep0>;
548 compatible = "adi,adv7511w";
550 interrupt-parent = <&gpio1>;
551 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
553 adi,input-depth = <8>;
554 adi,input-colorspace = "rgb";
555 adi,input-clock = "1x";
556 adi,input-style = <1>;
557 adi,input-justification = "evenly";
560 #address-cells = <1>;
565 adv7511_in: endpoint {
566 remote-endpoint = <&du_out_lvds0>;
572 adv7511_out: endpoint {
573 remote-endpoint = <&hdmi_con>;
581 pinctrl-names = "default";
582 pinctrl-0 = <&iic3_pins>;
586 compatible = "dlg,da9063";
588 interrupt-parent = <&irqc0>;
589 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
590 interrupt-controller;
593 compatible = "dlg,da9063-rtc";
597 compatible = "dlg,da9063-watchdog";
601 vdd_dvfs: regulator@68 {
602 compatible = "dlg,da9210";
604 interrupt-parent = <&irqc0>;
605 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
607 regulator-min-microvolt = <1000000>;
608 regulator-max-microvolt = <1000000>;
616 pinctrl-0 = <&usb0_pins>;
617 pinctrl-names = "default";
622 pinctrl-0 = <&usb1_pins>;
623 pinctrl-names = "default";
628 pinctrl-0 = <&usb2_pins>;
629 pinctrl-names = "default";
634 pinctrl-0 = <&usb2_pins>;
635 pinctrl-names = "default";
640 pinctrl-0 = <&hsusb_pins>;
641 pinctrl-names = "default";
642 renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
649 /* composite video input */
651 pinctrl-0 = <&vin1_pins>;
652 pinctrl-names = "default";
657 #address-cells = <1>;
661 remote-endpoint = <&adv7180>;
668 pinctrl-0 = <&sound_pins &sound_clk_pins>;
669 pinctrl-names = "default";
672 #sound-dai-cells = <0>;
678 playback = <&ssi0 &src2 &dvc0>;
679 capture = <&ssi1 &src3 &dvc1>;