blk: rq_data_dir() should not return a boolean
[cris-mirror.git] / arch / blackfin / include / uapi / asm / ptrace.h
blobfd48bd0739d2dcc871035e4a1f5118200133d598
1 /*
2 * Copyright 2004-2008 Analog Devices Inc.
4 * Licensed under the GPL-2 or later.
5 */
7 #ifndef _UAPI_BFIN_PTRACE_H
8 #define _UAPI_BFIN_PTRACE_H
11 * GCC defines register number like this:
12 * -----------------------------
13 * 0 - 7 are data registers R0-R7
14 * 8 - 15 are address registers P0-P7
15 * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
16 * 32 - 33 A registers A0 & A1
17 * 34 - status register
18 * -----------------------------
20 * We follows above, except:
21 * 32-33 --- Low 32-bit of A0&1
22 * 34-35 --- High 8-bit of A0&1
25 #ifndef __ASSEMBLY__
27 struct task_struct;
29 /* this struct defines the way the registers are stored on the
30 stack during a system call. */
32 struct pt_regs {
33 long orig_pc;
34 long ipend;
35 long seqstat;
36 long rete;
37 long retn;
38 long retx;
39 long pc; /* PC == RETI */
40 long rets;
41 long reserved; /* Used as scratch during system calls */
42 long astat;
43 long lb1;
44 long lb0;
45 long lt1;
46 long lt0;
47 long lc1;
48 long lc0;
49 long a1w;
50 long a1x;
51 long a0w;
52 long a0x;
53 long b3;
54 long b2;
55 long b1;
56 long b0;
57 long l3;
58 long l2;
59 long l1;
60 long l0;
61 long m3;
62 long m2;
63 long m1;
64 long m0;
65 long i3;
66 long i2;
67 long i1;
68 long i0;
69 long usp;
70 long fp;
71 long p5;
72 long p4;
73 long p3;
74 long p2;
75 long p1;
76 long p0;
77 long r7;
78 long r6;
79 long r5;
80 long r4;
81 long r3;
82 long r2;
83 long r1;
84 long r0;
85 long orig_r0;
86 long orig_p0;
87 long syscfg;
90 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
91 #define PTRACE_GETREGS 12
92 #define PTRACE_SETREGS 13 /* ptrace signal */
94 #define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
95 #define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
96 #define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
98 #define PS_S (0x0002)
101 #endif /* __ASSEMBLY__ */
104 * Offsets used by 'ptrace' system call interface.
107 #define PT_R0 204
108 #define PT_R1 200
109 #define PT_R2 196
110 #define PT_R3 192
111 #define PT_R4 188
112 #define PT_R5 184
113 #define PT_R6 180
114 #define PT_R7 176
115 #define PT_P0 172
116 #define PT_P1 168
117 #define PT_P2 164
118 #define PT_P3 160
119 #define PT_P4 156
120 #define PT_P5 152
121 #define PT_FP 148
122 #define PT_USP 144
123 #define PT_I0 140
124 #define PT_I1 136
125 #define PT_I2 132
126 #define PT_I3 128
127 #define PT_M0 124
128 #define PT_M1 120
129 #define PT_M2 116
130 #define PT_M3 112
131 #define PT_L0 108
132 #define PT_L1 104
133 #define PT_L2 100
134 #define PT_L3 96
135 #define PT_B0 92
136 #define PT_B1 88
137 #define PT_B2 84
138 #define PT_B3 80
139 #define PT_A0X 76
140 #define PT_A0W 72
141 #define PT_A1X 68
142 #define PT_A1W 64
143 #define PT_LC0 60
144 #define PT_LC1 56
145 #define PT_LT0 52
146 #define PT_LT1 48
147 #define PT_LB0 44
148 #define PT_LB1 40
149 #define PT_ASTAT 36
150 #define PT_RESERVED 32
151 #define PT_RETS 28
152 #define PT_PC 24
153 #define PT_RETX 20
154 #define PT_RETN 16
155 #define PT_RETE 12
156 #define PT_SEQSTAT 8
157 #define PT_IPEND 4
159 #define PT_ORIG_R0 208
160 #define PT_ORIG_P0 212
161 #define PT_SYSCFG 216
162 #define PT_TEXT_ADDR 220
163 #define PT_TEXT_END_ADDR 224
164 #define PT_DATA_ADDR 228
165 #define PT_FDPIC_EXEC 232
166 #define PT_FDPIC_INTERP 236
168 #define PT_LAST_PSEUDO PT_FDPIC_INTERP
170 #endif /* _UAPI_BFIN_PTRACE_H */