blk: rq_data_dir() should not return a boolean
[cris-mirror.git] / arch / mips / pci / pci-lantiq.c
blob6a15dbd085aa8e600a59d5a0680cd9be1a3f3f60
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
6 * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
7 */
9 #include <linux/types.h>
10 #include <linux/pci.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/mm.h>
15 #include <linux/vmalloc.h>
16 #include <linux/module.h>
17 #include <linux/clk.h>
18 #include <linux/of_platform.h>
19 #include <linux/of_gpio.h>
20 #include <linux/of_irq.h>
21 #include <linux/of_pci.h>
23 #include <asm/addrspace.h>
25 #include <lantiq_soc.h>
26 #include <lantiq_irq.h>
28 #include "pci-lantiq.h"
30 #define PCI_CR_FCI_ADDR_MAP0 0x00C0
31 #define PCI_CR_FCI_ADDR_MAP1 0x00C4
32 #define PCI_CR_FCI_ADDR_MAP2 0x00C8
33 #define PCI_CR_FCI_ADDR_MAP3 0x00CC
34 #define PCI_CR_FCI_ADDR_MAP4 0x00D0
35 #define PCI_CR_FCI_ADDR_MAP5 0x00D4
36 #define PCI_CR_FCI_ADDR_MAP6 0x00D8
37 #define PCI_CR_FCI_ADDR_MAP7 0x00DC
38 #define PCI_CR_CLK_CTRL 0x0000
39 #define PCI_CR_PCI_MOD 0x0030
40 #define PCI_CR_PC_ARB 0x0080
41 #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
42 #define PCI_CR_BAR11MASK 0x0044
43 #define PCI_CR_BAR12MASK 0x0048
44 #define PCI_CR_BAR13MASK 0x004C
45 #define PCI_CS_BASE_ADDR1 0x0010
46 #define PCI_CR_PCI_ADDR_MAP11 0x0064
47 #define PCI_CR_FCI_BURST_LENGTH 0x00E8
48 #define PCI_CR_PCI_EOI 0x002C
49 #define PCI_CS_STS_CMD 0x0004
51 #define PCI_MASTER0_REQ_MASK_2BITS 8
52 #define PCI_MASTER1_REQ_MASK_2BITS 10
53 #define PCI_MASTER2_REQ_MASK_2BITS 12
54 #define INTERNAL_ARB_ENABLE_BIT 0
56 #define LTQ_CGU_IFCCR 0x0018
57 #define LTQ_CGU_PCICR 0x0034
59 #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
60 #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
62 #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
63 #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
65 __iomem void *ltq_pci_mapped_cfg;
66 static __iomem void *ltq_pci_membase;
68 static int reset_gpio;
69 static struct clk *clk_pci, *clk_external;
70 static struct resource pci_io_resource;
71 static struct resource pci_mem_resource;
72 static struct pci_ops pci_ops = {
73 .read = ltq_pci_read_config_dword,
74 .write = ltq_pci_write_config_dword
77 static struct pci_controller pci_controller = {
78 .pci_ops = &pci_ops,
79 .mem_resource = &pci_mem_resource,
80 .mem_offset = 0x00000000UL,
81 .io_resource = &pci_io_resource,
82 .io_offset = 0x00000000UL,
85 static inline u32 ltq_calc_bar11mask(void)
87 u32 mem, bar11mask;
89 /* BAR11MASK value depends on available memory on system. */
90 mem = get_num_physpages() * PAGE_SIZE;
91 bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
93 return bar11mask;
96 static int ltq_pci_startup(struct platform_device *pdev)
98 struct device_node *node = pdev->dev.of_node;
99 const __be32 *req_mask, *bus_clk;
100 u32 temp_buffer;
102 /* get our clocks */
103 clk_pci = clk_get(&pdev->dev, NULL);
104 if (IS_ERR(clk_pci)) {
105 dev_err(&pdev->dev, "failed to get pci clock\n");
106 return PTR_ERR(clk_pci);
109 clk_external = clk_get(&pdev->dev, "external");
110 if (IS_ERR(clk_external)) {
111 clk_put(clk_pci);
112 dev_err(&pdev->dev, "failed to get external pci clock\n");
113 return PTR_ERR(clk_external);
116 /* read the bus speed that we want */
117 bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
118 if (bus_clk)
119 clk_set_rate(clk_pci, *bus_clk);
121 /* and enable the clocks */
122 clk_enable(clk_pci);
123 if (of_find_property(node, "lantiq,external-clock", NULL))
124 clk_enable(clk_external);
125 else
126 clk_disable(clk_external);
128 /* setup reset gpio used by pci */
129 reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
130 if (gpio_is_valid(reset_gpio)) {
131 int ret = devm_gpio_request(&pdev->dev,
132 reset_gpio, "pci-reset");
133 if (ret) {
134 dev_err(&pdev->dev,
135 "failed to request gpio %d\n", reset_gpio);
136 return ret;
138 gpio_direction_output(reset_gpio, 1);
141 /* enable auto-switching between PCI and EBU */
142 ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
144 /* busy, i.e. configuration is not done, PCI access has to be retried */
145 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
146 wmb();
147 /* BUS Master/IO/MEM access */
148 ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
150 /* enable external 2 PCI masters */
151 temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
152 /* setup the request mask */
153 req_mask = of_get_property(node, "req-mask", NULL);
154 if (req_mask)
155 temp_buffer &= ~((*req_mask & 0xf) << 16);
156 else
157 temp_buffer &= ~0xf0000;
158 /* enable internal arbiter */
159 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
160 /* enable internal PCI master reqest */
161 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
163 /* enable EBU request */
164 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
166 /* enable all external masters request */
167 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
168 ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
169 wmb();
171 /* setup BAR memory regions */
172 ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
173 ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
174 ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
175 ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
176 ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
177 ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
178 ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
179 ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
180 ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
181 ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
182 ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
183 ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
184 /* both TX and RX endian swap are enabled */
185 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
186 wmb();
187 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
188 PCI_CR_BAR12MASK);
189 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
190 PCI_CR_BAR13MASK);
191 /*use 8 dw burst length */
192 ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
193 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
194 wmb();
196 /* setup irq line */
197 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
198 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
200 /* toggle reset pin */
201 if (gpio_is_valid(reset_gpio)) {
202 __gpio_set_value(reset_gpio, 0);
203 wmb();
204 mdelay(1);
205 __gpio_set_value(reset_gpio, 1);
207 return 0;
210 static int ltq_pci_probe(struct platform_device *pdev)
212 struct resource *res_cfg, *res_bridge;
214 pci_clear_flags(PCI_PROBE_ONLY);
216 res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
217 ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
218 if (IS_ERR(ltq_pci_membase))
219 return PTR_ERR(ltq_pci_membase);
221 res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
222 ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
223 if (IS_ERR(ltq_pci_mapped_cfg))
224 return PTR_ERR(ltq_pci_mapped_cfg);
226 ltq_pci_startup(pdev);
228 pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
229 register_pci_controller(&pci_controller);
230 return 0;
233 static const struct of_device_id ltq_pci_match[] = {
234 { .compatible = "lantiq,pci-xway" },
237 MODULE_DEVICE_TABLE(of, ltq_pci_match);
239 static struct platform_driver ltq_pci_driver = {
240 .probe = ltq_pci_probe,
241 .driver = {
242 .name = "pci-xway",
243 .of_match_table = ltq_pci_match,
247 int __init pcibios_init(void)
249 int ret = platform_driver_register(&ltq_pci_driver);
250 if (ret)
251 pr_info("pci-xway: Error registering platform driver!");
252 return ret;
255 arch_initcall(pcibios_init);