?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.26-rc1
[cris-mirror.git] / drivers / ata / sata_inic162x.c
blobd27bb9a2568f77678e82dfbc032df8045daa4b94
1 /*
2 * sata_inic162x.c - Driver for Initio 162x SATA controllers
3 *
4 * Copyright 2006 SUSE Linux Products GmbH
5 * Copyright 2006 Tejun Heo <teheo@novell.com>
6 *
7 * This file is released under GPL v2.
8 *
9 * This controller is eccentric and easily locks up if something isn't
10 * right. Documentation is available at initio's website but it only
11 * documents registers (not programming model).
12 *
13 * - ATA disks work.
14 * - Hotplug works.
15 * - ATAPI read works but burning doesn't. This thing is really
16 * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
17 * ATAPI DMA WRITE should be programmed. If you've got a clue, be
18 * my guest.
19 * - Both STR and STD work.
20 */
21
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <scsi/scsi_host.h>
26 #include <linux/libata.h>
27 #include <linux/blkdev.h>
28 #include <scsi/scsi_device.h>
29
30 #define DRV_NAME "sata_inic162x"
31 #define DRV_VERSION "0.3"
32
33 enum {
34 MMIO_BAR = 5,
35
36 NR_PORTS = 2,
37
38 HOST_CTL = 0x7c,
39 HOST_STAT = 0x7e,
40 HOST_IRQ_STAT = 0xbc,
41 HOST_IRQ_MASK = 0xbe,
42
43 PORT_SIZE = 0x40,
44
45 /* registers for ATA TF operation */
46 PORT_TF = 0x00,
47 PORT_ALT_STAT = 0x08,
48 PORT_IRQ_STAT = 0x09,
49 PORT_IRQ_MASK = 0x0a,
50 PORT_PRD_CTL = 0x0b,
51 PORT_PRD_ADDR = 0x0c,
52 PORT_PRD_XFERLEN = 0x10,
53
54 /* IDMA register */
55 PORT_IDMA_CTL = 0x14,
56
57 PORT_SCR = 0x20,
58
59 /* HOST_CTL bits */
60 HCTL_IRQOFF = (1 << 8), /* global IRQ off */
61 HCTL_PWRDWN = (1 << 13), /* power down PHYs */
62 HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
63 HCTL_RPGSEL = (1 << 15), /* register page select */
64
65 HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
66 HCTL_RPGSEL,
67
68 /* HOST_IRQ_(STAT|MASK) bits */
69 HIRQ_PORT0 = (1 << 0),
70 HIRQ_PORT1 = (1 << 1),
71 HIRQ_SOFT = (1 << 14),
72 HIRQ_GLOBAL = (1 << 15), /* STAT only */
73
74 /* PORT_IRQ_(STAT|MASK) bits */
75 PIRQ_OFFLINE = (1 << 0), /* device unplugged */
76 PIRQ_ONLINE = (1 << 1), /* device plugged */
77 PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
78 PIRQ_FATAL = (1 << 3), /* fatal error */
79 PIRQ_ATA = (1 << 4), /* ATA interrupt */
80 PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
81 PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
82
83 PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
84
85 PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
86 PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
87 PIRQ_MASK_FREEZE = 0xff,
88
89 /* PORT_PRD_CTL bits */
90 PRD_CTL_START = (1 << 0),
91 PRD_CTL_WR = (1 << 3),
92 PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
93
94 /* PORT_IDMA_CTL bits */
95 IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
96 IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
97 IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
98 IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
99 };
100
101 struct inic_host_priv {
102 u16 cached_hctl;
103 };
104
105 struct inic_port_priv {
106 u8 dfl_prdctl;
107 u8 cached_prdctl;
108 u8 cached_pirq_mask;
109 };
110
111 static struct scsi_host_template inic_sht = {
112 ATA_BMDMA_SHT(DRV_NAME),
113 };
114
115 static const int scr_map[] = {
116 [SCR_STATUS] = 0,
117 [SCR_ERROR] = 1,
118 [SCR_CONTROL] = 2,
119 };
120
121 static void __iomem *inic_port_base(struct ata_port *ap)
122 {
123 return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
124 }
125
126 static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
127 {
128 void __iomem *port_base = inic_port_base(ap);
129 struct inic_port_priv *pp = ap->private_data;
130
131 writeb(mask, port_base + PORT_IRQ_MASK);
132 pp->cached_pirq_mask = mask;
133 }
134
135 static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
136 {
137 struct inic_port_priv *pp = ap->private_data;
138
139 if (pp->cached_pirq_mask != mask)
140 __inic_set_pirq_mask(ap, mask);
141 }
142
143 static void inic_reset_port(void __iomem *port_base)
144 {
145 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
146 u16 ctl;
147
148 ctl = readw(idma_ctl);
149 ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
150
151 /* mask IRQ and assert reset */
152 writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
153 readw(idma_ctl); /* flush */
154
155 /* give it some time */
156 msleep(1);
157
158 /* release reset */
159 writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
160
161 /* clear irq */
162 writeb(0xff, port_base + PORT_IRQ_STAT);
163
164 /* reenable ATA IRQ, turn off IDMA mode */
165 writew(ctl, idma_ctl);
166 }
167
168 static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
169 {
170 void __iomem *scr_addr = ap->ioaddr.scr_addr;
171 void __iomem *addr;
172
173 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
174 return -EINVAL;
175
176 addr = scr_addr + scr_map[sc_reg] * 4;
177 *val = readl(scr_addr + scr_map[sc_reg] * 4);
178
179 /* this controller has stuck DIAG.N, ignore it */
180 if (sc_reg == SCR_ERROR)
181 *val &= ~SERR_PHYRDY_CHG;
182 return 0;
183 }
184
185 static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
186 {
187 void __iomem *scr_addr = ap->ioaddr.scr_addr;
188 void __iomem *addr;
189
190 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
191 return -EINVAL;
192
193 addr = scr_addr + scr_map[sc_reg] * 4;
194 writel(val, scr_addr + scr_map[sc_reg] * 4);
195 return 0;
196 }
197
198 /*
199 * In TF mode, inic162x is very similar to SFF device. TF registers
200 * function the same. DMA engine behaves similary using the same PRD
201 * format as BMDMA but different command register, interrupt and event
202 * notification methods are used. The following inic_bmdma_*()
203 * functions do the impedance matching.
204 */
205 static void inic_bmdma_setup(struct ata_queued_cmd *qc)
206 {
207 struct ata_port *ap = qc->ap;
208 struct inic_port_priv *pp = ap->private_data;
209 void __iomem *port_base = inic_port_base(ap);
210 int rw = qc->tf.flags & ATA_TFLAG_WRITE;
211
212 /* make sure device sees PRD table writes */
213 wmb();
214
215 /* load transfer length */
216 writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
217
218 /* turn on DMA and specify data direction */
219 pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
220 if (!rw)
221 pp->cached_prdctl |= PRD_CTL_WR;
222 writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
223
224 /* issue r/w command */
225 ap->ops->sff_exec_command(ap, &qc->tf);
226 }
227
228 static void inic_bmdma_start(struct ata_queued_cmd *qc)
229 {
230 struct ata_port *ap = qc->ap;
231 struct inic_port_priv *pp = ap->private_data;
232 void __iomem *port_base = inic_port_base(ap);
233
234 /* start host DMA transaction */
235 pp->cached_prdctl |= PRD_CTL_START;
236 writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
237 }
238
239 static void inic_bmdma_stop(struct ata_queued_cmd *qc)
240 {
241 struct ata_port *ap = qc->ap;
242 struct inic_port_priv *pp = ap->private_data;
243 void __iomem *port_base = inic_port_base(ap);
244
245 /* stop DMA engine */
246 writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
247 }
248
249 static u8 inic_bmdma_status(struct ata_port *ap)
250 {
251 /* event is already verified by the interrupt handler */
252 return ATA_DMA_INTR;
253 }
254
255 static void inic_host_intr(struct ata_port *ap)
256 {
257 void __iomem *port_base = inic_port_base(ap);
258 struct ata_eh_info *ehi = &ap->link.eh_info;
259 u8 irq_stat;
260
261 /* fetch and clear irq */
262 irq_stat = readb(port_base + PORT_IRQ_STAT);
263 writeb(irq_stat, port_base + PORT_IRQ_STAT);
264
265 if (likely(!(irq_stat & PIRQ_ERR))) {
266 struct ata_queued_cmd *qc =
267 ata_qc_from_tag(ap, ap->link.active_tag);
268
269 if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
270 ap->ops->sff_check_status(ap); /* clear ATA interrupt */
271 return;
272 }
273
274 if (likely(ata_sff_host_intr(ap, qc)))
275 return;
276
277 ap->ops->sff_check_status(ap); /* clear ATA interrupt */
278 ata_port_printk(ap, KERN_WARNING, "unhandled "
279 "interrupt, irq_stat=%x\n", irq_stat);
280 return;
281 }
282
283 /* error */
284 ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
285
286 if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
287 ata_ehi_hotplugged(ehi);
288 ata_port_freeze(ap);
289 } else
290 ata_port_abort(ap);
291 }
292
293 static irqreturn_t inic_interrupt(int irq, void *dev_instance)
294 {
295 struct ata_host *host = dev_instance;
296 void __iomem *mmio_base = host->iomap[MMIO_BAR];
297 u16 host_irq_stat;
298 int i, handled = 0;;
299
300 host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
301
302 if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
303 goto out;
304
305 spin_lock(&host->lock);
306
307 for (i = 0; i < NR_PORTS; i++) {
308 struct ata_port *ap = host->ports[i];
309
310 if (!(host_irq_stat & (HIRQ_PORT0 << i)))
311 continue;
312
313 if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
314 inic_host_intr(ap);
315 handled++;
316 } else {
317 if (ata_ratelimit())
318 dev_printk(KERN_ERR, host->dev, "interrupt "
319 "from disabled port %d (0x%x)\n",
320 i, host_irq_stat);
321 }
322 }
323
324 spin_unlock(&host->lock);
325
326 out:
327 return IRQ_RETVAL(handled);
328 }
329
330 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
331 {
332 struct ata_port *ap = qc->ap;
333
334 /* ATA IRQ doesn't wait for DMA transfer completion and vice
335 * versa. Mask IRQ selectively to detect command completion.
336 * Without it, ATA DMA read command can cause data corruption.
337 *
338 * Something similar might be needed for ATAPI writes. I
339 * tried a lot of combinations but couldn't find the solution.
340 */
341 if (qc->tf.protocol == ATA_PROT_DMA &&
342 !(qc->tf.flags & ATA_TFLAG_WRITE))
343 inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
344 else
345 inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
346
347 /* Issuing a command to yet uninitialized port locks up the
348 * controller. Most of the time, this happens for the first
349 * command after reset which are ATA and ATAPI IDENTIFYs.
350 * Fast fail if stat is 0x7f or 0xff for those commands.
351 */
352 if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
353 qc->tf.command == ATA_CMD_ID_ATAPI)) {
354 u8 stat = ap->ops->sff_check_status(ap);
355 if (stat == 0x7f || stat == 0xff)
356 return AC_ERR_HSM;
357 }
358
359 return ata_sff_qc_issue(qc);
360 }
361
362 static void inic_freeze(struct ata_port *ap)
363 {
364 void __iomem *port_base = inic_port_base(ap);
365
366 __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
367
368 ap->ops->sff_check_status(ap);
369 writeb(0xff, port_base + PORT_IRQ_STAT);
370
371 readb(port_base + PORT_IRQ_STAT); /* flush */
372 }
373
374 static void inic_thaw(struct ata_port *ap)
375 {
376 void __iomem *port_base = inic_port_base(ap);
377
378 ap->ops->sff_check_status(ap);
379 writeb(0xff, port_base + PORT_IRQ_STAT);
380
381 __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
382
383 readb(port_base + PORT_IRQ_STAT); /* flush */
384 }
385
386 /*
387 * SRST and SControl hardreset don't give valid signature on this
388 * controller. Only controller specific hardreset mechanism works.
389 */
390 static int inic_hardreset(struct ata_link *link, unsigned int *class,
391 unsigned long deadline)
392 {
393 struct ata_port *ap = link->ap;
394 void __iomem *port_base = inic_port_base(ap);
395 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
396 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
397 u16 val;
398 int rc;
399
400 /* hammer it into sane state */
401 inic_reset_port(port_base);
402
403 val = readw(idma_ctl);
404 writew(val | IDMA_CTL_RST_ATA, idma_ctl);
405 readw(idma_ctl); /* flush */
406 msleep(1);
407 writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
408
409 rc = sata_link_resume(link, timing, deadline);
410 if (rc) {
411 ata_link_printk(link, KERN_WARNING, "failed to resume "
412 "link after reset (errno=%d)\n", rc);
413 return rc;
414 }
415
416 *class = ATA_DEV_NONE;
417 if (ata_link_online(link)) {
418 struct ata_taskfile tf;
419
420 /* wait for link to become ready */
421 rc = ata_sff_wait_after_reset(link, 1, deadline);
422 /* link occupied, -ENODEV too is an error */
423 if (rc) {
424 ata_link_printk(link, KERN_WARNING, "device not ready "
425 "after hardreset (errno=%d)\n", rc);
426 return rc;
427 }
428
429 ata_sff_tf_read(ap, &tf);
430 *class = ata_dev_classify(&tf);
431 }
432
433 return 0;
434 }
435
436 static void inic_error_handler(struct ata_port *ap)
437 {
438 void __iomem *port_base = inic_port_base(ap);
439 struct inic_port_priv *pp = ap->private_data;
440 unsigned long flags;
441
442 /* reset PIO HSM and stop DMA engine */
443 inic_reset_port(port_base);
444
445 spin_lock_irqsave(ap->lock, flags);
446 ap->hsm_task_state = HSM_ST_IDLE;
447 writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
448 spin_unlock_irqrestore(ap->lock, flags);
449
450 /* PIO and DMA engines have been stopped, perform recovery */
451 ata_std_error_handler(ap);
452 }
453
454 static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
455 {
456 /* make DMA engine forget about the failed command */
457 if (qc->flags & ATA_QCFLAG_FAILED)
458 inic_reset_port(inic_port_base(qc->ap));
459 }
460
461 static void inic_dev_config(struct ata_device *dev)
462 {
463 /* inic can only handle upto LBA28 max sectors */
464 if (dev->max_sectors > ATA_MAX_SECTORS)
465 dev->max_sectors = ATA_MAX_SECTORS;
466
467 if (dev->n_sectors >= 1 << 28) {
468 ata_dev_printk(dev, KERN_ERR,
469 "ERROR: This driver doesn't support LBA48 yet and may cause\n"
470 " data corruption on such devices. Disabling.\n");
471 ata_dev_disable(dev);
472 }
473 }
474
475 static void init_port(struct ata_port *ap)
476 {
477 void __iomem *port_base = inic_port_base(ap);
478
479 /* Setup PRD address */
480 writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
481 }
482
483 static int inic_port_resume(struct ata_port *ap)
484 {
485 init_port(ap);
486 return 0;
487 }
488
489 static int inic_port_start(struct ata_port *ap)
490 {
491 void __iomem *port_base = inic_port_base(ap);
492 struct inic_port_priv *pp;
493 u8 tmp;
494 int rc;
495
496 /* alloc and initialize private data */
497 pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
498 if (!pp)
499 return -ENOMEM;
500 ap->private_data = pp;
501
502 /* default PRD_CTL value, DMAEN, WR and START off */
503 tmp = readb(port_base + PORT_PRD_CTL);
504 tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
505 pp->dfl_prdctl = tmp;
506
507 /* Alloc resources */
508 rc = ata_port_start(ap);
509 if (rc) {
510 kfree(pp);
511 return rc;
512 }
513
514 init_port(ap);
515
516 return 0;
517 }
518
519 static struct ata_port_operations inic_port_ops = {
520 .inherits = &ata_sff_port_ops,
521
522 .bmdma_setup = inic_bmdma_setup,
523 .bmdma_start = inic_bmdma_start,
524 .bmdma_stop = inic_bmdma_stop,
525 .bmdma_status = inic_bmdma_status,
526 .qc_issue = inic_qc_issue,
527
528 .freeze = inic_freeze,
529 .thaw = inic_thaw,
530 .softreset = ATA_OP_NULL, /* softreset is broken */
531 .hardreset = inic_hardreset,
532 .error_handler = inic_error_handler,
533 .post_internal_cmd = inic_post_internal_cmd,
534 .dev_config = inic_dev_config,
535
536 .scr_read = inic_scr_read,
537 .scr_write = inic_scr_write,
538
539 .port_resume = inic_port_resume,
540 .port_start = inic_port_start,
541 };
542
543 static struct ata_port_info inic_port_info = {
544 /* For some reason, ATAPI_PROT_PIO is broken on this
545 * controller, and no, PIO_POLLING does't fix it. It somehow
546 * manages to report the wrong ireason and ignoring ireason
547 * results in machine lock up. Tell libata to always prefer
548 * DMA.
549 */
550 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
551 .pio_mask = 0x1f, /* pio0-4 */
552 .mwdma_mask = 0x07, /* mwdma0-2 */
553 .udma_mask = ATA_UDMA6,
554 .port_ops = &inic_port_ops
555 };
556
557 static int init_controller(void __iomem *mmio_base, u16 hctl)
558 {
559 int i;
560 u16 val;
561
562 hctl &= ~HCTL_KNOWN_BITS;
563
564 /* Soft reset whole controller. Spec says reset duration is 3
565 * PCI clocks, be generous and give it 10ms.
566 */
567 writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
568 readw(mmio_base + HOST_CTL); /* flush */
569
570 for (i = 0; i < 10; i++) {
571 msleep(1);
572 val = readw(mmio_base + HOST_CTL);
573 if (!(val & HCTL_SOFTRST))
574 break;
575 }
576
577 if (val & HCTL_SOFTRST)
578 return -EIO;
579
580 /* mask all interrupts and reset ports */
581 for (i = 0; i < NR_PORTS; i++) {
582 void __iomem *port_base = mmio_base + i * PORT_SIZE;
583
584 writeb(0xff, port_base + PORT_IRQ_MASK);
585 inic_reset_port(port_base);
586 }
587
588 /* port IRQ is masked now, unmask global IRQ */
589 writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
590 val = readw(mmio_base + HOST_IRQ_MASK);
591 val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
592 writew(val, mmio_base + HOST_IRQ_MASK);
593
594 return 0;
595 }
596
597 #ifdef CONFIG_PM
598 static int inic_pci_device_resume(struct pci_dev *pdev)
599 {
600 struct ata_host *host = dev_get_drvdata(&pdev->dev);
601 struct inic_host_priv *hpriv = host->private_data;
602 void __iomem *mmio_base = host->iomap[MMIO_BAR];
603 int rc;
604
605 rc = ata_pci_device_do_resume(pdev);
606 if (rc)
607 return rc;
608
609 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
610 rc = init_controller(mmio_base, hpriv->cached_hctl);
611 if (rc)
612 return rc;
613 }
614
615 ata_host_resume(host);
616
617 return 0;
618 }
619 #endif
620
621 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
622 {
623 static int printed_version;
624 const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
625 struct ata_host *host;
626 struct inic_host_priv *hpriv;
627 void __iomem * const *iomap;
628 int i, rc;
629
630 if (!printed_version++)
631 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
632
633 /* alloc host */
634 host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
635 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
636 if (!host || !hpriv)
637 return -ENOMEM;
638
639 host->private_data = hpriv;
640
641 /* acquire resources and fill host */
642 rc = pcim_enable_device(pdev);
643 if (rc)
644 return rc;
645
646 rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
647 if (rc)
648 return rc;
649 host->iomap = iomap = pcim_iomap_table(pdev);
650
651 for (i = 0; i < NR_PORTS; i++) {
652 struct ata_port *ap = host->ports[i];
653 struct ata_ioports *port = &ap->ioaddr;
654 unsigned int offset = i * PORT_SIZE;
655
656 port->cmd_addr = iomap[2 * i];
657 port->altstatus_addr =
658 port->ctl_addr = (void __iomem *)
659 ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
660 port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
661
662 ata_sff_std_ports(port);
663
664 ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
665 ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
666 ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
667 (unsigned long long)pci_resource_start(pdev, 2 * i),
668 (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
669 ATA_PCI_CTL_OFS);
670 }
671
672 hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
673
674 /* Set dma_mask. This devices doesn't support 64bit addressing. */
675 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
676 if (rc) {
677 dev_printk(KERN_ERR, &pdev->dev,
678 "32-bit DMA enable failed\n");
679 return rc;
680 }
681
682 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
683 if (rc) {
684 dev_printk(KERN_ERR, &pdev->dev,
685 "32-bit consistent DMA enable failed\n");
686 return rc;
687 }
688
689 /*
690 * This controller is braindamaged. dma_boundary is 0xffff
691 * like others but it will lock up the whole machine HARD if
692 * 65536 byte PRD entry is fed. Reduce maximum segment size.
693 */
694 rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
695 if (rc) {
696 dev_printk(KERN_ERR, &pdev->dev,
697 "failed to set the maximum segment size.\n");
698 return rc;
699 }
700
701 rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
702 if (rc) {
703 dev_printk(KERN_ERR, &pdev->dev,
704 "failed to initialize controller\n");
705 return rc;
706 }
707
708 pci_set_master(pdev);
709 return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
710 &inic_sht);
711 }
712
713 static const struct pci_device_id inic_pci_tbl[] = {
714 { PCI_VDEVICE(INIT, 0x1622), },
715 { },
716 };
717
718 static struct pci_driver inic_pci_driver = {
719 .name = DRV_NAME,
720 .id_table = inic_pci_tbl,
721 #ifdef CONFIG_PM
722 .suspend = ata_pci_device_suspend,
723 .resume = inic_pci_device_resume,
724 #endif
725 .probe = inic_init_one,
726 .remove = ata_pci_remove_one,
727 };
728
729 static int __init inic_init(void)
730 {
731 return pci_register_driver(&inic_pci_driver);
732 }
733
734 static void __exit inic_exit(void)
735 {
736 pci_unregister_driver(&inic_pci_driver);
737 }
738
739 MODULE_AUTHOR("Tejun Heo");
740 MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
741 MODULE_LICENSE("GPL v2");
742 MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
743 MODULE_VERSION(DRV_VERSION);
744
745 module_init(inic_init);
746 module_exit(inic_exit);
CRIS linux kernel tree