Linux 2.6.26-rc1
[cris-mirror.git] / drivers / mtd / nand / nand_bbt.c
blob5e121ceaa59899ea94d964aab94df39845c18520
1 /*
2 * drivers/mtd/nand_bbt.c
4 * Overview:
5 * Bad block table support for the NAND driver
7 * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
9 * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
15 * Description:
17 * When nand_scan_bbt is called, then it tries to find the bad block table
18 * depending on the options in the bbt descriptor(s). If a bbt is found
19 * then the contents are read and the memory based bbt is created. If a
20 * mirrored bbt is selected then the mirror is searched too and the
21 * versions are compared. If the mirror has a greater version number
22 * than the mirror bbt is used to build the memory based bbt.
23 * If the tables are not versioned, then we "or" the bad block information.
24 * If one of the bbt's is out of date or does not exist it is (re)created.
25 * If no bbt exists at all then the device is scanned for factory marked
26 * good / bad blocks and the bad block tables are created.
28 * For manufacturer created bbts like the one found on M-SYS DOC devices
29 * the bbt is searched and read but never created
31 * The autogenerated bad block table is located in the last good blocks
32 * of the device. The table is mirrored, so it can be updated eventually.
33 * The table is marked in the oob area with an ident pattern and a version
34 * number which indicates which of both tables is more up to date.
36 * The table uses 2 bits per block
37 * 11b: block is good
38 * 00b: block is factory marked bad
39 * 01b, 10b: block is marked bad due to wear
41 * The memory bad block table uses the following scheme:
42 * 00b: block is good
43 * 01b: block is marked bad due to wear
44 * 10b: block is reserved (to protect the bbt area)
45 * 11b: block is factory marked bad
47 * Multichip devices like DOC store the bad block info per floor.
49 * Following assumptions are made:
50 * - bbts start at a page boundary, if autolocated on a block boundary
51 * - the space necessary for a bbt in FLASH does not exceed a block boundary
55 #include <linux/slab.h>
56 #include <linux/types.h>
57 #include <linux/mtd/mtd.h>
58 #include <linux/mtd/nand.h>
59 #include <linux/mtd/nand_ecc.h>
60 #include <linux/mtd/compatmac.h>
61 #include <linux/bitops.h>
62 #include <linux/delay.h>
63 #include <linux/vmalloc.h>
65 /**
66 * check_pattern - [GENERIC] check if a pattern is in the buffer
67 * @buf: the buffer to search
68 * @len: the length of buffer to search
69 * @paglen: the pagelength
70 * @td: search pattern descriptor
72 * Check for a pattern at the given place. Used to search bad block
73 * tables and good / bad block identifiers.
74 * If the SCAN_EMPTY option is set then check, if all bytes except the
75 * pattern area contain 0xff
78 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
80 int i, end = 0;
81 uint8_t *p = buf;
83 end = paglen + td->offs;
84 if (td->options & NAND_BBT_SCANEMPTY) {
85 for (i = 0; i < end; i++) {
86 if (p[i] != 0xff)
87 return -1;
90 p += end;
92 /* Compare the pattern */
93 for (i = 0; i < td->len; i++) {
94 if (p[i] != td->pattern[i])
95 return -1;
98 if (td->options & NAND_BBT_SCANEMPTY) {
99 p += td->len;
100 end += td->len;
101 for (i = end; i < len; i++) {
102 if (*p++ != 0xff)
103 return -1;
106 return 0;
110 * check_short_pattern - [GENERIC] check if a pattern is in the buffer
111 * @buf: the buffer to search
112 * @td: search pattern descriptor
114 * Check for a pattern at the given place. Used to search bad block
115 * tables and good / bad block identifiers. Same as check_pattern, but
116 * no optional empty check
119 static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
121 int i;
122 uint8_t *p = buf;
124 /* Compare the pattern */
125 for (i = 0; i < td->len; i++) {
126 if (p[td->offs + i] != td->pattern[i])
127 return -1;
129 return 0;
133 * read_bbt - [GENERIC] Read the bad block table starting from page
134 * @mtd: MTD device structure
135 * @buf: temporary buffer
136 * @page: the starting page
137 * @num: the number of bbt descriptors to read
138 * @bits: number of bits per block
139 * @offs: offset in the memory table
140 * @reserved_block_code: Pattern to identify reserved blocks
142 * Read the bad block table starting from page.
145 static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
146 int bits, int offs, int reserved_block_code)
148 int res, i, j, act = 0;
149 struct nand_chip *this = mtd->priv;
150 size_t retlen, len, totlen;
151 loff_t from;
152 uint8_t msk = (uint8_t) ((1 << bits) - 1);
154 totlen = (num * bits) >> 3;
155 from = ((loff_t) page) << this->page_shift;
157 while (totlen) {
158 len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
159 res = mtd->read(mtd, from, len, &retlen, buf);
160 if (res < 0) {
161 if (retlen != len) {
162 printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
163 return res;
165 printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
168 /* Analyse data */
169 for (i = 0; i < len; i++) {
170 uint8_t dat = buf[i];
171 for (j = 0; j < 8; j += bits, act += 2) {
172 uint8_t tmp = (dat >> j) & msk;
173 if (tmp == msk)
174 continue;
175 if (reserved_block_code && (tmp == reserved_block_code)) {
176 printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
177 ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
178 this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
179 mtd->ecc_stats.bbtblocks++;
180 continue;
182 /* Leave it for now, if its matured we can move this
183 * message to MTD_DEBUG_LEVEL0 */
184 printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
185 ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
186 /* Factory marked bad or worn out ? */
187 if (tmp == 0)
188 this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
189 else
190 this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
191 mtd->ecc_stats.badblocks++;
194 totlen -= len;
195 from += len;
197 return 0;
201 * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
202 * @mtd: MTD device structure
203 * @buf: temporary buffer
204 * @td: descriptor for the bad block table
205 * @chip: read the table for a specific chip, -1 read all chips.
206 * Applies only if NAND_BBT_PERCHIP option is set
208 * Read the bad block table for all chips starting at a given page
209 * We assume that the bbt bits are in consecutive order.
211 static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
213 struct nand_chip *this = mtd->priv;
214 int res = 0, i;
215 int bits;
217 bits = td->options & NAND_BBT_NRBITS_MSK;
218 if (td->options & NAND_BBT_PERCHIP) {
219 int offs = 0;
220 for (i = 0; i < this->numchips; i++) {
221 if (chip == -1 || chip == i)
222 res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
223 if (res)
224 return res;
225 offs += this->chipsize >> (this->bbt_erase_shift + 2);
227 } else {
228 res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
229 if (res)
230 return res;
232 return 0;
236 * Scan read raw data from flash
238 static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
239 size_t len)
241 struct mtd_oob_ops ops;
243 ops.mode = MTD_OOB_RAW;
244 ops.ooboffs = 0;
245 ops.ooblen = mtd->oobsize;
246 ops.oobbuf = buf;
247 ops.datbuf = buf;
248 ops.len = len;
250 return mtd->read_oob(mtd, offs, &ops);
254 * Scan write data with oob to flash
256 static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
257 uint8_t *buf, uint8_t *oob)
259 struct mtd_oob_ops ops;
261 ops.mode = MTD_OOB_PLACE;
262 ops.ooboffs = 0;
263 ops.ooblen = mtd->oobsize;
264 ops.datbuf = buf;
265 ops.oobbuf = oob;
266 ops.len = len;
268 return mtd->write_oob(mtd, offs, &ops);
272 * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
273 * @mtd: MTD device structure
274 * @buf: temporary buffer
275 * @td: descriptor for the bad block table
276 * @md: descriptor for the bad block table mirror
278 * Read the bad block table(s) for all chips starting at a given page
279 * We assume that the bbt bits are in consecutive order.
282 static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
283 struct nand_bbt_descr *td, struct nand_bbt_descr *md)
285 struct nand_chip *this = mtd->priv;
287 /* Read the primary version, if available */
288 if (td->options & NAND_BBT_VERSION) {
289 scan_read_raw(mtd, buf, td->pages[0] << this->page_shift,
290 mtd->writesize);
291 td->version[0] = buf[mtd->writesize + td->veroffs];
292 printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
293 td->pages[0], td->version[0]);
296 /* Read the mirror version, if available */
297 if (md && (md->options & NAND_BBT_VERSION)) {
298 scan_read_raw(mtd, buf, md->pages[0] << this->page_shift,
299 mtd->writesize);
300 md->version[0] = buf[mtd->writesize + md->veroffs];
301 printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
302 md->pages[0], md->version[0]);
304 return 1;
308 * Scan a given block full
310 static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
311 loff_t offs, uint8_t *buf, size_t readlen,
312 int scanlen, int len)
314 int ret, j;
316 ret = scan_read_raw(mtd, buf, offs, readlen);
317 if (ret)
318 return ret;
320 for (j = 0; j < len; j++, buf += scanlen) {
321 if (check_pattern(buf, scanlen, mtd->writesize, bd))
322 return 1;
324 return 0;
328 * Scan a given block partially
330 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
331 loff_t offs, uint8_t *buf, int len)
333 struct mtd_oob_ops ops;
334 int j, ret;
336 ops.ooblen = mtd->oobsize;
337 ops.oobbuf = buf;
338 ops.ooboffs = 0;
339 ops.datbuf = NULL;
340 ops.mode = MTD_OOB_PLACE;
342 for (j = 0; j < len; j++) {
344 * Read the full oob until read_oob is fixed to
345 * handle single byte reads for 16 bit
346 * buswidth
348 ret = mtd->read_oob(mtd, offs, &ops);
349 if (ret)
350 return ret;
352 if (check_short_pattern(buf, bd))
353 return 1;
355 offs += mtd->writesize;
357 return 0;
361 * create_bbt - [GENERIC] Create a bad block table by scanning the device
362 * @mtd: MTD device structure
363 * @buf: temporary buffer
364 * @bd: descriptor for the good/bad block search pattern
365 * @chip: create the table for a specific chip, -1 read all chips.
366 * Applies only if NAND_BBT_PERCHIP option is set
368 * Create a bad block table by scanning the device
369 * for the given good/bad block identify pattern
371 static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
372 struct nand_bbt_descr *bd, int chip)
374 struct nand_chip *this = mtd->priv;
375 int i, numblocks, len, scanlen;
376 int startblock;
377 loff_t from;
378 size_t readlen;
380 printk(KERN_INFO "Scanning device for bad blocks\n");
382 if (bd->options & NAND_BBT_SCANALLPAGES)
383 len = 1 << (this->bbt_erase_shift - this->page_shift);
384 else {
385 if (bd->options & NAND_BBT_SCAN2NDPAGE)
386 len = 2;
387 else
388 len = 1;
391 if (!(bd->options & NAND_BBT_SCANEMPTY)) {
392 /* We need only read few bytes from the OOB area */
393 scanlen = 0;
394 readlen = bd->len;
395 } else {
396 /* Full page content should be read */
397 scanlen = mtd->writesize + mtd->oobsize;
398 readlen = len * mtd->writesize;
401 if (chip == -1) {
402 /* Note that numblocks is 2 * (real numblocks) here, see i+=2
403 * below as it makes shifting and masking less painful */
404 numblocks = mtd->size >> (this->bbt_erase_shift - 1);
405 startblock = 0;
406 from = 0;
407 } else {
408 if (chip >= this->numchips) {
409 printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
410 chip + 1, this->numchips);
411 return -EINVAL;
413 numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
414 startblock = chip * numblocks;
415 numblocks += startblock;
416 from = startblock << (this->bbt_erase_shift - 1);
419 for (i = startblock; i < numblocks;) {
420 int ret;
422 if (bd->options & NAND_BBT_SCANALLPAGES)
423 ret = scan_block_full(mtd, bd, from, buf, readlen,
424 scanlen, len);
425 else
426 ret = scan_block_fast(mtd, bd, from, buf, len);
428 if (ret < 0)
429 return ret;
431 if (ret) {
432 this->bbt[i >> 3] |= 0x03 << (i & 0x6);
433 printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
434 i >> 1, (unsigned int)from);
435 mtd->ecc_stats.badblocks++;
438 i += 2;
439 from += (1 << this->bbt_erase_shift);
441 return 0;
445 * search_bbt - [GENERIC] scan the device for a specific bad block table
446 * @mtd: MTD device structure
447 * @buf: temporary buffer
448 * @td: descriptor for the bad block table
450 * Read the bad block table by searching for a given ident pattern.
451 * Search is preformed either from the beginning up or from the end of
452 * the device downwards. The search starts always at the start of a
453 * block.
454 * If the option NAND_BBT_PERCHIP is given, each chip is searched
455 * for a bbt, which contains the bad block information of this chip.
456 * This is necessary to provide support for certain DOC devices.
458 * The bbt ident pattern resides in the oob area of the first page
459 * in a block.
461 static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
463 struct nand_chip *this = mtd->priv;
464 int i, chips;
465 int bits, startblock, block, dir;
466 int scanlen = mtd->writesize + mtd->oobsize;
467 int bbtblocks;
468 int blocktopage = this->bbt_erase_shift - this->page_shift;
470 /* Search direction top -> down ? */
471 if (td->options & NAND_BBT_LASTBLOCK) {
472 startblock = (mtd->size >> this->bbt_erase_shift) - 1;
473 dir = -1;
474 } else {
475 startblock = 0;
476 dir = 1;
479 /* Do we have a bbt per chip ? */
480 if (td->options & NAND_BBT_PERCHIP) {
481 chips = this->numchips;
482 bbtblocks = this->chipsize >> this->bbt_erase_shift;
483 startblock &= bbtblocks - 1;
484 } else {
485 chips = 1;
486 bbtblocks = mtd->size >> this->bbt_erase_shift;
489 /* Number of bits for each erase block in the bbt */
490 bits = td->options & NAND_BBT_NRBITS_MSK;
492 for (i = 0; i < chips; i++) {
493 /* Reset version information */
494 td->version[i] = 0;
495 td->pages[i] = -1;
496 /* Scan the maximum number of blocks */
497 for (block = 0; block < td->maxblocks; block++) {
499 int actblock = startblock + dir * block;
500 loff_t offs = actblock << this->bbt_erase_shift;
502 /* Read first page */
503 scan_read_raw(mtd, buf, offs, mtd->writesize);
504 if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
505 td->pages[i] = actblock << blocktopage;
506 if (td->options & NAND_BBT_VERSION) {
507 td->version[i] = buf[mtd->writesize + td->veroffs];
509 break;
512 startblock += this->chipsize >> this->bbt_erase_shift;
514 /* Check, if we found a bbt for each requested chip */
515 for (i = 0; i < chips; i++) {
516 if (td->pages[i] == -1)
517 printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
518 else
519 printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
520 td->version[i]);
522 return 0;
526 * search_read_bbts - [GENERIC] scan the device for bad block table(s)
527 * @mtd: MTD device structure
528 * @buf: temporary buffer
529 * @td: descriptor for the bad block table
530 * @md: descriptor for the bad block table mirror
532 * Search and read the bad block table(s)
534 static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
536 /* Search the primary table */
537 search_bbt(mtd, buf, td);
539 /* Search the mirror table */
540 if (md)
541 search_bbt(mtd, buf, md);
543 /* Force result check */
544 return 1;
548 * write_bbt - [GENERIC] (Re)write the bad block table
550 * @mtd: MTD device structure
551 * @buf: temporary buffer
552 * @td: descriptor for the bad block table
553 * @md: descriptor for the bad block table mirror
554 * @chipsel: selector for a specific chip, -1 for all
556 * (Re)write the bad block table
559 static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
560 struct nand_bbt_descr *td, struct nand_bbt_descr *md,
561 int chipsel)
563 struct nand_chip *this = mtd->priv;
564 struct erase_info einfo;
565 int i, j, res, chip = 0;
566 int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
567 int nrchips, bbtoffs, pageoffs, ooboffs;
568 uint8_t msk[4];
569 uint8_t rcode = td->reserved_block_code;
570 size_t retlen, len = 0;
571 loff_t to;
572 struct mtd_oob_ops ops;
574 ops.ooblen = mtd->oobsize;
575 ops.ooboffs = 0;
576 ops.datbuf = NULL;
577 ops.mode = MTD_OOB_PLACE;
579 if (!rcode)
580 rcode = 0xff;
581 /* Write bad block table per chip rather than per device ? */
582 if (td->options & NAND_BBT_PERCHIP) {
583 numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
584 /* Full device write or specific chip ? */
585 if (chipsel == -1) {
586 nrchips = this->numchips;
587 } else {
588 nrchips = chipsel + 1;
589 chip = chipsel;
591 } else {
592 numblocks = (int)(mtd->size >> this->bbt_erase_shift);
593 nrchips = 1;
596 /* Loop through the chips */
597 for (; chip < nrchips; chip++) {
599 /* There was already a version of the table, reuse the page
600 * This applies for absolute placement too, as we have the
601 * page nr. in td->pages.
603 if (td->pages[chip] != -1) {
604 page = td->pages[chip];
605 goto write;
608 /* Automatic placement of the bad block table */
609 /* Search direction top -> down ? */
610 if (td->options & NAND_BBT_LASTBLOCK) {
611 startblock = numblocks * (chip + 1) - 1;
612 dir = -1;
613 } else {
614 startblock = chip * numblocks;
615 dir = 1;
618 for (i = 0; i < td->maxblocks; i++) {
619 int block = startblock + dir * i;
620 /* Check, if the block is bad */
621 switch ((this->bbt[block >> 2] >>
622 (2 * (block & 0x03))) & 0x03) {
623 case 0x01:
624 case 0x03:
625 continue;
627 page = block <<
628 (this->bbt_erase_shift - this->page_shift);
629 /* Check, if the block is used by the mirror table */
630 if (!md || md->pages[chip] != page)
631 goto write;
633 printk(KERN_ERR "No space left to write bad block table\n");
634 return -ENOSPC;
635 write:
637 /* Set up shift count and masks for the flash table */
638 bits = td->options & NAND_BBT_NRBITS_MSK;
639 msk[2] = ~rcode;
640 switch (bits) {
641 case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
642 msk[3] = 0x01;
643 break;
644 case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
645 msk[3] = 0x03;
646 break;
647 case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
648 msk[3] = 0x0f;
649 break;
650 case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
651 msk[3] = 0xff;
652 break;
653 default: return -EINVAL;
656 bbtoffs = chip * (numblocks >> 2);
658 to = ((loff_t) page) << this->page_shift;
660 /* Must we save the block contents ? */
661 if (td->options & NAND_BBT_SAVECONTENT) {
662 /* Make it block aligned */
663 to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
664 len = 1 << this->bbt_erase_shift;
665 res = mtd->read(mtd, to, len, &retlen, buf);
666 if (res < 0) {
667 if (retlen != len) {
668 printk(KERN_INFO "nand_bbt: Error "
669 "reading block for writing "
670 "the bad block table\n");
671 return res;
673 printk(KERN_WARNING "nand_bbt: ECC error "
674 "while reading block for writing "
675 "bad block table\n");
677 /* Read oob data */
678 ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
679 ops.oobbuf = &buf[len];
680 res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
681 if (res < 0 || ops.oobretlen != ops.ooblen)
682 goto outerr;
684 /* Calc the byte offset in the buffer */
685 pageoffs = page - (int)(to >> this->page_shift);
686 offs = pageoffs << this->page_shift;
687 /* Preset the bbt area with 0xff */
688 memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
689 ooboffs = len + (pageoffs * mtd->oobsize);
691 } else {
692 /* Calc length */
693 len = (size_t) (numblocks >> sft);
694 /* Make it page aligned ! */
695 len = (len + (mtd->writesize - 1)) &
696 ~(mtd->writesize - 1);
697 /* Preset the buffer with 0xff */
698 memset(buf, 0xff, len +
699 (len >> this->page_shift)* mtd->oobsize);
700 offs = 0;
701 ooboffs = len;
702 /* Pattern is located in oob area of first page */
703 memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
706 if (td->options & NAND_BBT_VERSION)
707 buf[ooboffs + td->veroffs] = td->version[chip];
709 /* walk through the memory table */
710 for (i = 0; i < numblocks;) {
711 uint8_t dat;
712 dat = this->bbt[bbtoffs + (i >> 2)];
713 for (j = 0; j < 4; j++, i++) {
714 int sftcnt = (i << (3 - sft)) & sftmsk;
715 /* Do not store the reserved bbt blocks ! */
716 buf[offs + (i >> sft)] &=
717 ~(msk[dat & 0x03] << sftcnt);
718 dat >>= 2;
722 memset(&einfo, 0, sizeof(einfo));
723 einfo.mtd = mtd;
724 einfo.addr = (unsigned long)to;
725 einfo.len = 1 << this->bbt_erase_shift;
726 res = nand_erase_nand(mtd, &einfo, 1);
727 if (res < 0)
728 goto outerr;
730 res = scan_write_bbt(mtd, to, len, buf, &buf[len]);
731 if (res < 0)
732 goto outerr;
734 printk(KERN_DEBUG "Bad block table written to 0x%08x, version "
735 "0x%02X\n", (unsigned int)to, td->version[chip]);
737 /* Mark it as used */
738 td->pages[chip] = page;
740 return 0;
742 outerr:
743 printk(KERN_WARNING
744 "nand_bbt: Error while writing bad block table %d\n", res);
745 return res;
749 * nand_memory_bbt - [GENERIC] create a memory based bad block table
750 * @mtd: MTD device structure
751 * @bd: descriptor for the good/bad block search pattern
753 * The function creates a memory based bbt by scanning the device
754 * for manufacturer / software marked good / bad blocks
756 static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
758 struct nand_chip *this = mtd->priv;
760 bd->options &= ~NAND_BBT_SCANEMPTY;
761 return create_bbt(mtd, this->buffers->databuf, bd, -1);
765 * check_create - [GENERIC] create and write bbt(s) if necessary
766 * @mtd: MTD device structure
767 * @buf: temporary buffer
768 * @bd: descriptor for the good/bad block search pattern
770 * The function checks the results of the previous call to read_bbt
771 * and creates / updates the bbt(s) if necessary
772 * Creation is necessary if no bbt was found for the chip/device
773 * Update is necessary if one of the tables is missing or the
774 * version nr. of one table is less than the other
776 static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
778 int i, chips, writeops, chipsel, res;
779 struct nand_chip *this = mtd->priv;
780 struct nand_bbt_descr *td = this->bbt_td;
781 struct nand_bbt_descr *md = this->bbt_md;
782 struct nand_bbt_descr *rd, *rd2;
784 /* Do we have a bbt per chip ? */
785 if (td->options & NAND_BBT_PERCHIP)
786 chips = this->numchips;
787 else
788 chips = 1;
790 for (i = 0; i < chips; i++) {
791 writeops = 0;
792 rd = NULL;
793 rd2 = NULL;
794 /* Per chip or per device ? */
795 chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
796 /* Mirrored table avilable ? */
797 if (md) {
798 if (td->pages[i] == -1 && md->pages[i] == -1) {
799 writeops = 0x03;
800 goto create;
803 if (td->pages[i] == -1) {
804 rd = md;
805 td->version[i] = md->version[i];
806 writeops = 1;
807 goto writecheck;
810 if (md->pages[i] == -1) {
811 rd = td;
812 md->version[i] = td->version[i];
813 writeops = 2;
814 goto writecheck;
817 if (td->version[i] == md->version[i]) {
818 rd = td;
819 if (!(td->options & NAND_BBT_VERSION))
820 rd2 = md;
821 goto writecheck;
824 if (((int8_t) (td->version[i] - md->version[i])) > 0) {
825 rd = td;
826 md->version[i] = td->version[i];
827 writeops = 2;
828 } else {
829 rd = md;
830 td->version[i] = md->version[i];
831 writeops = 1;
834 goto writecheck;
836 } else {
837 if (td->pages[i] == -1) {
838 writeops = 0x01;
839 goto create;
841 rd = td;
842 goto writecheck;
844 create:
845 /* Create the bad block table by scanning the device ? */
846 if (!(td->options & NAND_BBT_CREATE))
847 continue;
849 /* Create the table in memory by scanning the chip(s) */
850 create_bbt(mtd, buf, bd, chipsel);
852 td->version[i] = 1;
853 if (md)
854 md->version[i] = 1;
855 writecheck:
856 /* read back first ? */
857 if (rd)
858 read_abs_bbt(mtd, buf, rd, chipsel);
859 /* If they weren't versioned, read both. */
860 if (rd2)
861 read_abs_bbt(mtd, buf, rd2, chipsel);
863 /* Write the bad block table to the device ? */
864 if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
865 res = write_bbt(mtd, buf, td, md, chipsel);
866 if (res < 0)
867 return res;
870 /* Write the mirror bad block table to the device ? */
871 if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
872 res = write_bbt(mtd, buf, md, td, chipsel);
873 if (res < 0)
874 return res;
877 return 0;
881 * mark_bbt_regions - [GENERIC] mark the bad block table regions
882 * @mtd: MTD device structure
883 * @td: bad block table descriptor
885 * The bad block table regions are marked as "bad" to prevent
886 * accidental erasures / writes. The regions are identified by
887 * the mark 0x02.
889 static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
891 struct nand_chip *this = mtd->priv;
892 int i, j, chips, block, nrblocks, update;
893 uint8_t oldval, newval;
895 /* Do we have a bbt per chip ? */
896 if (td->options & NAND_BBT_PERCHIP) {
897 chips = this->numchips;
898 nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
899 } else {
900 chips = 1;
901 nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
904 for (i = 0; i < chips; i++) {
905 if ((td->options & NAND_BBT_ABSPAGE) ||
906 !(td->options & NAND_BBT_WRITE)) {
907 if (td->pages[i] == -1)
908 continue;
909 block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
910 block <<= 1;
911 oldval = this->bbt[(block >> 3)];
912 newval = oldval | (0x2 << (block & 0x06));
913 this->bbt[(block >> 3)] = newval;
914 if ((oldval != newval) && td->reserved_block_code)
915 nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1));
916 continue;
918 update = 0;
919 if (td->options & NAND_BBT_LASTBLOCK)
920 block = ((i + 1) * nrblocks) - td->maxblocks;
921 else
922 block = i * nrblocks;
923 block <<= 1;
924 for (j = 0; j < td->maxblocks; j++) {
925 oldval = this->bbt[(block >> 3)];
926 newval = oldval | (0x2 << (block & 0x06));
927 this->bbt[(block >> 3)] = newval;
928 if (oldval != newval)
929 update = 1;
930 block += 2;
932 /* If we want reserved blocks to be recorded to flash, and some
933 new ones have been marked, then we need to update the stored
934 bbts. This should only happen once. */
935 if (update && td->reserved_block_code)
936 nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1));
941 * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
942 * @mtd: MTD device structure
943 * @bd: descriptor for the good/bad block search pattern
945 * The function checks, if a bad block table(s) is/are already
946 * available. If not it scans the device for manufacturer
947 * marked good / bad blocks and writes the bad block table(s) to
948 * the selected place.
950 * The bad block table memory is allocated here. It must be freed
951 * by calling the nand_free_bbt function.
954 int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
956 struct nand_chip *this = mtd->priv;
957 int len, res = 0;
958 uint8_t *buf;
959 struct nand_bbt_descr *td = this->bbt_td;
960 struct nand_bbt_descr *md = this->bbt_md;
962 len = mtd->size >> (this->bbt_erase_shift + 2);
963 /* Allocate memory (2bit per block) and clear the memory bad block table */
964 this->bbt = kzalloc(len, GFP_KERNEL);
965 if (!this->bbt) {
966 printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
967 return -ENOMEM;
970 /* If no primary table decriptor is given, scan the device
971 * to build a memory based bad block table
973 if (!td) {
974 if ((res = nand_memory_bbt(mtd, bd))) {
975 printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
976 kfree(this->bbt);
977 this->bbt = NULL;
979 return res;
982 /* Allocate a temporary buffer for one eraseblock incl. oob */
983 len = (1 << this->bbt_erase_shift);
984 len += (len >> this->page_shift) * mtd->oobsize;
985 buf = vmalloc(len);
986 if (!buf) {
987 printk(KERN_ERR "nand_bbt: Out of memory\n");
988 kfree(this->bbt);
989 this->bbt = NULL;
990 return -ENOMEM;
993 /* Is the bbt at a given page ? */
994 if (td->options & NAND_BBT_ABSPAGE) {
995 res = read_abs_bbts(mtd, buf, td, md);
996 } else {
997 /* Search the bad block table using a pattern in oob */
998 res = search_read_bbts(mtd, buf, td, md);
1001 if (res)
1002 res = check_create(mtd, buf, bd);
1004 /* Prevent the bbt regions from erasing / writing */
1005 mark_bbt_region(mtd, td);
1006 if (md)
1007 mark_bbt_region(mtd, md);
1009 vfree(buf);
1010 return res;
1014 * nand_update_bbt - [NAND Interface] update bad block table(s)
1015 * @mtd: MTD device structure
1016 * @offs: the offset of the newly marked block
1018 * The function updates the bad block table(s)
1020 int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
1022 struct nand_chip *this = mtd->priv;
1023 int len, res = 0, writeops = 0;
1024 int chip, chipsel;
1025 uint8_t *buf;
1026 struct nand_bbt_descr *td = this->bbt_td;
1027 struct nand_bbt_descr *md = this->bbt_md;
1029 if (!this->bbt || !td)
1030 return -EINVAL;
1032 len = mtd->size >> (this->bbt_erase_shift + 2);
1033 /* Allocate a temporary buffer for one eraseblock incl. oob */
1034 len = (1 << this->bbt_erase_shift);
1035 len += (len >> this->page_shift) * mtd->oobsize;
1036 buf = kmalloc(len, GFP_KERNEL);
1037 if (!buf) {
1038 printk(KERN_ERR "nand_update_bbt: Out of memory\n");
1039 return -ENOMEM;
1042 writeops = md != NULL ? 0x03 : 0x01;
1044 /* Do we have a bbt per chip ? */
1045 if (td->options & NAND_BBT_PERCHIP) {
1046 chip = (int)(offs >> this->chip_shift);
1047 chipsel = chip;
1048 } else {
1049 chip = 0;
1050 chipsel = -1;
1053 td->version[chip]++;
1054 if (md)
1055 md->version[chip]++;
1057 /* Write the bad block table to the device ? */
1058 if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
1059 res = write_bbt(mtd, buf, td, md, chipsel);
1060 if (res < 0)
1061 goto out;
1063 /* Write the mirror bad block table to the device ? */
1064 if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
1065 res = write_bbt(mtd, buf, md, td, chipsel);
1068 out:
1069 kfree(buf);
1070 return res;
1073 /* Define some generic bad / good block scan pattern which are used
1074 * while scanning a device for factory marked good / bad blocks. */
1075 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
1077 static struct nand_bbt_descr smallpage_memorybased = {
1078 .options = NAND_BBT_SCAN2NDPAGE,
1079 .offs = 5,
1080 .len = 1,
1081 .pattern = scan_ff_pattern
1084 static struct nand_bbt_descr largepage_memorybased = {
1085 .options = 0,
1086 .offs = 0,
1087 .len = 2,
1088 .pattern = scan_ff_pattern
1091 static struct nand_bbt_descr smallpage_flashbased = {
1092 .options = NAND_BBT_SCAN2NDPAGE,
1093 .offs = 5,
1094 .len = 1,
1095 .pattern = scan_ff_pattern
1098 static struct nand_bbt_descr largepage_flashbased = {
1099 .options = NAND_BBT_SCAN2NDPAGE,
1100 .offs = 0,
1101 .len = 2,
1102 .pattern = scan_ff_pattern
1105 static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
1107 static struct nand_bbt_descr agand_flashbased = {
1108 .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
1109 .offs = 0x20,
1110 .len = 6,
1111 .pattern = scan_agand_pattern
1114 /* Generic flash bbt decriptors
1116 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
1117 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
1119 static struct nand_bbt_descr bbt_main_descr = {
1120 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1121 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1122 .offs = 8,
1123 .len = 4,
1124 .veroffs = 12,
1125 .maxblocks = 4,
1126 .pattern = bbt_pattern
1129 static struct nand_bbt_descr bbt_mirror_descr = {
1130 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1131 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1132 .offs = 8,
1133 .len = 4,
1134 .veroffs = 12,
1135 .maxblocks = 4,
1136 .pattern = mirror_pattern
1140 * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
1141 * @mtd: MTD device structure
1143 * This function selects the default bad block table
1144 * support for the device and calls the nand_scan_bbt function
1147 int nand_default_bbt(struct mtd_info *mtd)
1149 struct nand_chip *this = mtd->priv;
1151 /* Default for AG-AND. We must use a flash based
1152 * bad block table as the devices have factory marked
1153 * _good_ blocks. Erasing those blocks leads to loss
1154 * of the good / bad information, so we _must_ store
1155 * this information in a good / bad table during
1156 * startup
1158 if (this->options & NAND_IS_AND) {
1159 /* Use the default pattern descriptors */
1160 if (!this->bbt_td) {
1161 this->bbt_td = &bbt_main_descr;
1162 this->bbt_md = &bbt_mirror_descr;
1164 this->options |= NAND_USE_FLASH_BBT;
1165 return nand_scan_bbt(mtd, &agand_flashbased);
1168 /* Is a flash based bad block table requested ? */
1169 if (this->options & NAND_USE_FLASH_BBT) {
1170 /* Use the default pattern descriptors */
1171 if (!this->bbt_td) {
1172 this->bbt_td = &bbt_main_descr;
1173 this->bbt_md = &bbt_mirror_descr;
1175 if (!this->badblock_pattern) {
1176 this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased;
1178 } else {
1179 this->bbt_td = NULL;
1180 this->bbt_md = NULL;
1181 if (!this->badblock_pattern) {
1182 this->badblock_pattern = (mtd->writesize > 512) ?
1183 &largepage_memorybased : &smallpage_memorybased;
1186 return nand_scan_bbt(mtd, this->badblock_pattern);
1190 * nand_isbad_bbt - [NAND Interface] Check if a block is bad
1191 * @mtd: MTD device structure
1192 * @offs: offset in the device
1193 * @allowbbt: allow access to bad block table region
1196 int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
1198 struct nand_chip *this = mtd->priv;
1199 int block;
1200 uint8_t res;
1202 /* Get block number * 2 */
1203 block = (int)(offs >> (this->bbt_erase_shift - 1));
1204 res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
1206 DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
1207 (unsigned int)offs, block >> 1, res);
1209 switch ((int)res) {
1210 case 0x00:
1211 return 0;
1212 case 0x01:
1213 return 1;
1214 case 0x02:
1215 return allowbbt ? 0 : 1;
1217 return 1;
1220 EXPORT_SYMBOL(nand_scan_bbt);
1221 EXPORT_SYMBOL(nand_default_bbt);