?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
FRV: Use generic show_interrupts()
[cris-mirror.git] / drivers / media / video / omap3isp / ispcsi2.c
blobfb503f3db3bea06015559b327c216cbc5adb5308
1 /*
2 * ispcsi2.c
3 *
4 * TI OMAP3 ISP - CSI2 module
5 *
6 * Copyright (C) 2010 Nokia Corporation
7 * Copyright (C) 2009 Texas Instruments, Inc.
8 *
9 * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
10 * Sakari Ailus <sakari.ailus@iki.fi>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
24 * 02110-1301 USA
25 */
26 #include <linux/delay.h>
27 #include <media/v4l2-common.h>
28 #include <linux/v4l2-mediabus.h>
29 #include <linux/mm.h>
30
31 #include "isp.h"
32 #include "ispreg.h"
33 #include "ispcsi2.h"
34
35 /*
36 * csi2_if_enable - Enable CSI2 Receiver interface.
37 * @enable: enable flag
38 *
39 */
40 static void csi2_if_enable(struct isp_device *isp,
41 struct isp_csi2_device *csi2, u8 enable)
42 {
43 struct isp_csi2_ctrl_cfg *currctrl = &csi2->ctrl;
44
45 isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_CTRL, ISPCSI2_CTRL_IF_EN,
46 enable ? ISPCSI2_CTRL_IF_EN : 0);
47
48 currctrl->if_enable = enable;
49 }
50
51 /*
52 * csi2_recv_config - CSI2 receiver module configuration.
53 * @currctrl: isp_csi2_ctrl_cfg structure
54 *
55 */
56 static void csi2_recv_config(struct isp_device *isp,
57 struct isp_csi2_device *csi2,
58 struct isp_csi2_ctrl_cfg *currctrl)
59 {
60 u32 reg;
61
62 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTRL);
63
64 if (currctrl->frame_mode)
65 reg |= ISPCSI2_CTRL_FRAME;
66 else
67 reg &= ~ISPCSI2_CTRL_FRAME;
68
69 if (currctrl->vp_clk_enable)
70 reg |= ISPCSI2_CTRL_VP_CLK_EN;
71 else
72 reg &= ~ISPCSI2_CTRL_VP_CLK_EN;
73
74 if (currctrl->vp_only_enable)
75 reg |= ISPCSI2_CTRL_VP_ONLY_EN;
76 else
77 reg &= ~ISPCSI2_CTRL_VP_ONLY_EN;
78
79 reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK;
80 reg |= currctrl->vp_out_ctrl << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT;
81
82 if (currctrl->ecc_enable)
83 reg |= ISPCSI2_CTRL_ECC_EN;
84 else
85 reg &= ~ISPCSI2_CTRL_ECC_EN;
86
87 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTRL);
88 }
89
90 static const unsigned int csi2_input_fmts[] = {
91 V4L2_MBUS_FMT_SGRBG10_1X10,
92 V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
93 V4L2_MBUS_FMT_SRGGB10_1X10,
94 V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8,
95 V4L2_MBUS_FMT_SBGGR10_1X10,
96 V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8,
97 V4L2_MBUS_FMT_SGBRG10_1X10,
98 V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8,
99 };
100
101 /* To set the format on the CSI2 requires a mapping function that takes
102 * the following inputs:
103 * - 2 different formats (at this time)
104 * - 2 destinations (mem, vp+mem) (vp only handled separately)
105 * - 2 decompression options (on, off)
106 * - 2 isp revisions (certain format must be handled differently on OMAP3630)
107 * Output should be CSI2 frame format code
108 * Array indices as follows: [format][dest][decompr][is_3630]
109 * Not all combinations are valid. 0 means invalid.
110 */
111 static const u16 __csi2_fmt_map[2][2][2][2] = {
112 /* RAW10 formats */
113 {
114 /* Output to memory */
115 {
116 /* No DPCM decompression */
117 { CSI2_PIX_FMT_RAW10_EXP16, CSI2_PIX_FMT_RAW10_EXP16 },
118 /* DPCM decompression */
119 { 0, 0 },
120 },
121 /* Output to both */
122 {
123 /* No DPCM decompression */
124 { CSI2_PIX_FMT_RAW10_EXP16_VP,
125 CSI2_PIX_FMT_RAW10_EXP16_VP },
126 /* DPCM decompression */
127 { 0, 0 },
128 },
129 },
130 /* RAW10 DPCM8 formats */
131 {
132 /* Output to memory */
133 {
134 /* No DPCM decompression */
135 { CSI2_PIX_FMT_RAW8, CSI2_USERDEF_8BIT_DATA1 },
136 /* DPCM decompression */
137 { CSI2_PIX_FMT_RAW8_DPCM10_EXP16,
138 CSI2_USERDEF_8BIT_DATA1_DPCM10 },
139 },
140 /* Output to both */
141 {
142 /* No DPCM decompression */
143 { CSI2_PIX_FMT_RAW8_VP,
144 CSI2_PIX_FMT_RAW8_VP },
145 /* DPCM decompression */
146 { CSI2_PIX_FMT_RAW8_DPCM10_VP,
147 CSI2_USERDEF_8BIT_DATA1_DPCM10_VP },
148 },
149 },
150 };
151
152 /*
153 * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID
154 * @csi2: ISP CSI2 device
155 *
156 * Returns CSI2 physical format id
157 */
158 static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2)
159 {
160 const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK];
161 int fmtidx, destidx, is_3630;
162
163 switch (fmt->code) {
164 case V4L2_MBUS_FMT_SGRBG10_1X10:
165 case V4L2_MBUS_FMT_SRGGB10_1X10:
166 case V4L2_MBUS_FMT_SBGGR10_1X10:
167 case V4L2_MBUS_FMT_SGBRG10_1X10:
168 fmtidx = 0;
169 break;
170 case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8:
171 case V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8:
172 case V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8:
173 case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8:
174 fmtidx = 1;
175 break;
176 default:
177 WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n",
178 fmt->code);
179 return 0;
180 }
181
182 if (!(csi2->output & CSI2_OUTPUT_CCDC) &&
183 !(csi2->output & CSI2_OUTPUT_MEMORY)) {
184 /* Neither output enabled is a valid combination */
185 return CSI2_PIX_FMT_OTHERS;
186 }
187
188 /* If we need to skip frames at the beginning of the stream disable the
189 * video port to avoid sending the skipped frames to the CCDC.
190 */
191 destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_CCDC);
192 is_3630 = csi2->isp->revision == ISP_REVISION_15_0;
193
194 return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress][is_3630];
195 }
196
197 /*
198 * csi2_set_outaddr - Set memory address to save output image
199 * @csi2: Pointer to ISP CSI2a device.
200 * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary.
201 *
202 * Sets the memory address where the output will be saved.
203 *
204 * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte
205 * boundary.
206 */
207 static void csi2_set_outaddr(struct isp_csi2_device *csi2, u32 addr)
208 {
209 struct isp_device *isp = csi2->isp;
210 struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[0];
211
212 ctx->ping_addr = addr;
213 ctx->pong_addr = addr;
214 isp_reg_writel(isp, ctx->ping_addr,
215 csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum));
216 isp_reg_writel(isp, ctx->pong_addr,
217 csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum));
218 }
219
220 /*
221 * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should
222 * be enabled by CSI2.
223 * @format_id: mapped format id
224 *
225 */
226 static inline int is_usr_def_mapping(u32 format_id)
227 {
228 return (format_id & 0x40) ? 1 : 0;
229 }
230
231 /*
232 * csi2_ctx_enable - Enable specified CSI2 context
233 * @ctxnum: Context number, valid between 0 and 7 values.
234 * @enable: enable
235 *
236 */
237 static void csi2_ctx_enable(struct isp_device *isp,
238 struct isp_csi2_device *csi2, u8 ctxnum, u8 enable)
239 {
240 struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum];
241 unsigned int skip = 0;
242 u32 reg;
243
244 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum));
245
246 if (enable) {
247 if (csi2->frame_skip)
248 skip = csi2->frame_skip;
249 else if (csi2->output & CSI2_OUTPUT_MEMORY)
250 skip = 1;
251
252 reg &= ~ISPCSI2_CTX_CTRL1_COUNT_MASK;
253 reg |= ISPCSI2_CTX_CTRL1_COUNT_UNLOCK
254 | (skip << ISPCSI2_CTX_CTRL1_COUNT_SHIFT)
255 | ISPCSI2_CTX_CTRL1_CTX_EN;
256 } else {
257 reg &= ~ISPCSI2_CTX_CTRL1_CTX_EN;
258 }
259
260 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum));
261 ctx->enabled = enable;
262 }
263
264 /*
265 * csi2_ctx_config - CSI2 context configuration.
266 * @ctx: context configuration
267 *
268 */
269 static void csi2_ctx_config(struct isp_device *isp,
270 struct isp_csi2_device *csi2,
271 struct isp_csi2_ctx_cfg *ctx)
272 {
273 u32 reg;
274
275 /* Set up CSI2_CTx_CTRL1 */
276 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum));
277
278 if (ctx->eof_enabled)
279 reg |= ISPCSI2_CTX_CTRL1_EOF_EN;
280 else
281 reg &= ~ISPCSI2_CTX_CTRL1_EOF_EN;
282
283 if (ctx->eol_enabled)
284 reg |= ISPCSI2_CTX_CTRL1_EOL_EN;
285 else
286 reg &= ~ISPCSI2_CTX_CTRL1_EOL_EN;
287
288 if (ctx->checksum_enabled)
289 reg |= ISPCSI2_CTX_CTRL1_CS_EN;
290 else
291 reg &= ~ISPCSI2_CTX_CTRL1_CS_EN;
292
293 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum));
294
295 /* Set up CSI2_CTx_CTRL2 */
296 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum));
297
298 reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK);
299 reg |= ctx->virtual_id << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT;
300
301 reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK);
302 reg |= ctx->format_id << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT;
303
304 if (ctx->dpcm_decompress) {
305 if (ctx->dpcm_predictor)
306 reg |= ISPCSI2_CTX_CTRL2_DPCM_PRED;
307 else
308 reg &= ~ISPCSI2_CTX_CTRL2_DPCM_PRED;
309 }
310
311 if (is_usr_def_mapping(ctx->format_id)) {
312 reg &= ~ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK;
313 reg |= 2 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT;
314 }
315
316 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum));
317
318 /* Set up CSI2_CTx_CTRL3 */
319 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum));
320 reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK);
321 reg |= (ctx->alpha << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT);
322
323 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum));
324
325 /* Set up CSI2_CTx_DAT_OFST */
326 reg = isp_reg_readl(isp, csi2->regs1,
327 ISPCSI2_CTX_DAT_OFST(ctx->ctxnum));
328 reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK;
329 reg |= ctx->data_offset << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT;
330 isp_reg_writel(isp, reg, csi2->regs1,
331 ISPCSI2_CTX_DAT_OFST(ctx->ctxnum));
332
333 isp_reg_writel(isp, ctx->ping_addr,
334 csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum));
335
336 isp_reg_writel(isp, ctx->pong_addr,
337 csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum));
338 }
339
340 /*
341 * csi2_timing_config - CSI2 timing configuration.
342 * @timing: csi2_timing_cfg structure
343 */
344 static void csi2_timing_config(struct isp_device *isp,
345 struct isp_csi2_device *csi2,
346 struct isp_csi2_timing_cfg *timing)
347 {
348 u32 reg;
349
350 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_TIMING);
351
352 if (timing->force_rx_mode)
353 reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum);
354 else
355 reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum);
356
357 if (timing->stop_state_16x)
358 reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum);
359 else
360 reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum);
361
362 if (timing->stop_state_4x)
363 reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum);
364 else
365 reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum);
366
367 reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(timing->ionum);
368 reg |= timing->stop_state_counter <<
369 ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(timing->ionum);
370
371 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_TIMING);
372 }
373
374 /*
375 * csi2_irq_ctx_set - Enables CSI2 Context IRQs.
376 * @enable: Enable/disable CSI2 Context interrupts
377 */
378 static void csi2_irq_ctx_set(struct isp_device *isp,
379 struct isp_csi2_device *csi2, int enable)
380 {
381 u32 reg = ISPCSI2_CTX_IRQSTATUS_FE_IRQ;
382 int i;
383
384 if (csi2->use_fs_irq)
385 reg |= ISPCSI2_CTX_IRQSTATUS_FS_IRQ;
386
387 for (i = 0; i < 8; i++) {
388 isp_reg_writel(isp, reg, csi2->regs1,
389 ISPCSI2_CTX_IRQSTATUS(i));
390 if (enable)
391 isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
392 reg);
393 else
394 isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
395 reg);
396 }
397 }
398
399 /*
400 * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs.
401 * @enable: Enable/disable CSI2 ComplexIO #1 interrupts
402 */
403 static void csi2_irq_complexio1_set(struct isp_device *isp,
404 struct isp_csi2_device *csi2, int enable)
405 {
406 u32 reg;
407 reg = ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT |
408 ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER |
409 ISPCSI2_PHY_IRQENABLE_STATEULPM5 |
410 ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 |
411 ISPCSI2_PHY_IRQENABLE_ERRESC5 |
412 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 |
413 ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 |
414 ISPCSI2_PHY_IRQENABLE_STATEULPM4 |
415 ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 |
416 ISPCSI2_PHY_IRQENABLE_ERRESC4 |
417 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 |
418 ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 |
419 ISPCSI2_PHY_IRQENABLE_STATEULPM3 |
420 ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 |
421 ISPCSI2_PHY_IRQENABLE_ERRESC3 |
422 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 |
423 ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 |
424 ISPCSI2_PHY_IRQENABLE_STATEULPM2 |
425 ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 |
426 ISPCSI2_PHY_IRQENABLE_ERRESC2 |
427 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 |
428 ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 |
429 ISPCSI2_PHY_IRQENABLE_STATEULPM1 |
430 ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 |
431 ISPCSI2_PHY_IRQENABLE_ERRESC1 |
432 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 |
433 ISPCSI2_PHY_IRQENABLE_ERRSOTHS1;
434 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
435 if (enable)
436 reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQENABLE);
437 else
438 reg = 0;
439 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQENABLE);
440 }
441
442 /*
443 * csi2_irq_status_set - Enables CSI2 Status IRQs.
444 * @enable: Enable/disable CSI2 Status interrupts
445 */
446 static void csi2_irq_status_set(struct isp_device *isp,
447 struct isp_csi2_device *csi2, int enable)
448 {
449 u32 reg;
450 reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
451 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
452 ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ |
453 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
454 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
455 ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ |
456 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ |
457 ISPCSI2_IRQSTATUS_CONTEXT(0);
458 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQSTATUS);
459 if (enable)
460 reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQENABLE);
461 else
462 reg = 0;
463
464 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQENABLE);
465 }
466
467 /*
468 * omap3isp_csi2_reset - Resets the CSI2 module.
469 *
470 * Must be called with the phy lock held.
471 *
472 * Returns 0 if successful, or -EBUSY if power command didn't respond.
473 */
474 int omap3isp_csi2_reset(struct isp_csi2_device *csi2)
475 {
476 struct isp_device *isp = csi2->isp;
477 u8 soft_reset_retries = 0;
478 u32 reg;
479 int i;
480
481 if (!csi2->available)
482 return -ENODEV;
483
484 if (csi2->phy->phy_in_use)
485 return -EBUSY;
486
487 isp_reg_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
488 ISPCSI2_SYSCONFIG_SOFT_RESET);
489
490 do {
491 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_SYSSTATUS) &
492 ISPCSI2_SYSSTATUS_RESET_DONE;
493 if (reg == ISPCSI2_SYSSTATUS_RESET_DONE)
494 break;
495 soft_reset_retries++;
496 if (soft_reset_retries < 5)
497 udelay(100);
498 } while (soft_reset_retries < 5);
499
500 if (soft_reset_retries == 5) {
501 printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n");
502 return -EBUSY;
503 }
504
505 if (isp->revision == ISP_REVISION_15_0)
506 isp_reg_set(isp, csi2->regs1, ISPCSI2_PHY_CFG,
507 ISPCSI2_PHY_CFG_RESET_CTRL);
508
509 i = 100;
510 do {
511 reg = isp_reg_readl(isp, csi2->phy->phy_regs, ISPCSIPHY_REG1)
512 & ISPCSIPHY_REG1_RESET_DONE_CTRLCLK;
513 if (reg == ISPCSIPHY_REG1_RESET_DONE_CTRLCLK)
514 break;
515 udelay(100);
516 } while (--i > 0);
517
518 if (i == 0) {
519 printk(KERN_ERR
520 "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n");
521 return -EBUSY;
522 }
523
524 if (isp->autoidle)
525 isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
526 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK |
527 ISPCSI2_SYSCONFIG_AUTO_IDLE,
528 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART |
529 ((isp->revision == ISP_REVISION_15_0) ?
530 ISPCSI2_SYSCONFIG_AUTO_IDLE : 0));
531 else
532 isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
533 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK |
534 ISPCSI2_SYSCONFIG_AUTO_IDLE,
535 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO);
536
537 return 0;
538 }
539
540 static int csi2_configure(struct isp_csi2_device *csi2)
541 {
542 const struct isp_v4l2_subdevs_group *pdata;
543 struct isp_device *isp = csi2->isp;
544 struct isp_csi2_timing_cfg *timing = &csi2->timing[0];
545 struct v4l2_subdev *sensor;
546 struct media_pad *pad;
547
548 /*
549 * CSI2 fields that can be updated while the context has
550 * been enabled or the interface has been enabled are not
551 * updated dynamically currently. So we do not allow to
552 * reconfigure if either has been enabled
553 */
554 if (csi2->contexts[0].enabled || csi2->ctrl.if_enable)
555 return -EBUSY;
556
557 pad = media_entity_remote_source(&csi2->pads[CSI2_PAD_SINK]);
558 sensor = media_entity_to_v4l2_subdev(pad->entity);
559 pdata = sensor->host_priv;
560
561 csi2->frame_skip = 0;
562 v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip);
563
564 csi2->ctrl.vp_out_ctrl = pdata->bus.csi2.vpclk_div;
565 csi2->ctrl.frame_mode = ISP_CSI2_FRAME_IMMEDIATE;
566 csi2->ctrl.ecc_enable = pdata->bus.csi2.crc;
567
568 timing->ionum = 1;
569 timing->force_rx_mode = 1;
570 timing->stop_state_16x = 1;
571 timing->stop_state_4x = 1;
572 timing->stop_state_counter = 0x1FF;
573
574 /*
575 * The CSI2 receiver can't do any format conversion except DPCM
576 * decompression, so every set_format call configures both pads
577 * and enables DPCM decompression as a special case:
578 */
579 if (csi2->formats[CSI2_PAD_SINK].code !=
580 csi2->formats[CSI2_PAD_SOURCE].code)
581 csi2->dpcm_decompress = true;
582 else
583 csi2->dpcm_decompress = false;
584
585 csi2->contexts[0].format_id = csi2_ctx_map_format(csi2);
586
587 if (csi2->video_out.bpl_padding == 0)
588 csi2->contexts[0].data_offset = 0;
589 else
590 csi2->contexts[0].data_offset = csi2->video_out.bpl_value;
591
592 /*
593 * Enable end of frame and end of line signals generation for
594 * context 0. These signals are generated from CSI2 receiver to
595 * qualify the last pixel of a frame and the last pixel of a line.
596 * Without enabling the signals CSI2 receiver writes data to memory
597 * beyond buffer size and/or data line offset is not handled correctly.
598 */
599 csi2->contexts[0].eof_enabled = 1;
600 csi2->contexts[0].eol_enabled = 1;
601
602 csi2_irq_complexio1_set(isp, csi2, 1);
603 csi2_irq_ctx_set(isp, csi2, 1);
604 csi2_irq_status_set(isp, csi2, 1);
605
606 /* Set configuration (timings, format and links) */
607 csi2_timing_config(isp, csi2, timing);
608 csi2_recv_config(isp, csi2, &csi2->ctrl);
609 csi2_ctx_config(isp, csi2, &csi2->contexts[0]);
610
611 return 0;
612 }
613
614 /*
615 * csi2_print_status - Prints CSI2 debug information.
616 */
617 #define CSI2_PRINT_REGISTER(isp, regs, name)\
618 dev_dbg(isp->dev, "###CSI2 " #name "=0x%08x\n", \
619 isp_reg_readl(isp, regs, ISPCSI2_##name))
620
621 static void csi2_print_status(struct isp_csi2_device *csi2)
622 {
623 struct isp_device *isp = csi2->isp;
624
625 if (!csi2->available)
626 return;
627
628 dev_dbg(isp->dev, "-------------CSI2 Register dump-------------\n");
629
630 CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSCONFIG);
631 CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSSTATUS);
632 CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQENABLE);
633 CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQSTATUS);
634 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL);
635 CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_H);
636 CSI2_PRINT_REGISTER(isp, csi2->regs1, GNQ);
637 CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_CFG);
638 CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQSTATUS);
639 CSI2_PRINT_REGISTER(isp, csi2->regs1, SHORT_PACKET);
640 CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQENABLE);
641 CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_P);
642 CSI2_PRINT_REGISTER(isp, csi2->regs1, TIMING);
643 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL1(0));
644 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL2(0));
645 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_OFST(0));
646 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PING_ADDR(0));
647 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PONG_ADDR(0));
648 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQENABLE(0));
649 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQSTATUS(0));
650 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL3(0));
651
652 dev_dbg(isp->dev, "--------------------------------------------\n");
653 }
654
655 /* -----------------------------------------------------------------------------
656 * Interrupt handling
657 */
658
659 /*
660 * csi2_isr_buffer - Does buffer handling at end-of-frame
661 * when writing to memory.
662 */
663 static void csi2_isr_buffer(struct isp_csi2_device *csi2)
664 {
665 struct isp_device *isp = csi2->isp;
666 struct isp_buffer *buffer;
667
668 csi2_ctx_enable(isp, csi2, 0, 0);
669
670 buffer = omap3isp_video_buffer_next(&csi2->video_out, 0);
671
672 /*
673 * Let video queue operation restart engine if there is an underrun
674 * condition.
675 */
676 if (buffer == NULL)
677 return;
678
679 csi2_set_outaddr(csi2, buffer->isp_addr);
680 csi2_ctx_enable(isp, csi2, 0, 1);
681 }
682
683 static void csi2_isr_ctx(struct isp_csi2_device *csi2,
684 struct isp_csi2_ctx_cfg *ctx)
685 {
686 struct isp_device *isp = csi2->isp;
687 unsigned int n = ctx->ctxnum;
688 u32 status;
689
690 status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
691 isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
692
693 /* Propagate frame number */
694 if (status & ISPCSI2_CTX_IRQSTATUS_FS_IRQ) {
695 struct isp_pipeline *pipe =
696 to_isp_pipeline(&csi2->subdev.entity);
697 if (pipe->do_propagation)
698 atomic_inc(&pipe->frame_number);
699 }
700
701 if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ))
702 return;
703
704 /* Skip interrupts until we reach the frame skip count. The CSI2 will be
705 * automatically disabled, as the frame skip count has been programmed
706 * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
707 *
708 * It would have been nice to rely on the FRAME_NUMBER interrupt instead
709 * but it turned out that the interrupt is only generated when the CSI2
710 * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased
711 * correctly and reaches 0 when data is forwarded to the video port only
712 * but no interrupt arrives). Maybe a CSI2 hardware bug.
713 */
714 if (csi2->frame_skip) {
715 csi2->frame_skip--;
716 if (csi2->frame_skip == 0) {
717 ctx->format_id = csi2_ctx_map_format(csi2);
718 csi2_ctx_config(isp, csi2, ctx);
719 csi2_ctx_enable(isp, csi2, n, 1);
720 }
721 return;
722 }
723
724 if (csi2->output & CSI2_OUTPUT_MEMORY)
725 csi2_isr_buffer(csi2);
726 }
727
728 /*
729 * omap3isp_csi2_isr - CSI2 interrupt handling.
730 *
731 * Return -EIO on Transmission error
732 */
733 int omap3isp_csi2_isr(struct isp_csi2_device *csi2)
734 {
735 u32 csi2_irqstatus, cpxio1_irqstatus;
736 struct isp_device *isp = csi2->isp;
737 int retval = 0;
738
739 if (!csi2->available)
740 return -ENODEV;
741
742 csi2_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQSTATUS);
743 isp_reg_writel(isp, csi2_irqstatus, csi2->regs1, ISPCSI2_IRQSTATUS);
744
745 /* Failure Cases */
746 if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) {
747 cpxio1_irqstatus = isp_reg_readl(isp, csi2->regs1,
748 ISPCSI2_PHY_IRQSTATUS);
749 isp_reg_writel(isp, cpxio1_irqstatus,
750 csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
751 dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ "
752 "%x\n", cpxio1_irqstatus);
753 retval = -EIO;
754 }
755
756 if (csi2_irqstatus & (ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
757 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
758 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
759 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
760 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) {
761 dev_dbg(isp->dev, "CSI2 Err:"
762 " OCP:%d,"
763 " Short_pack:%d,"
764 " ECC:%d,"
765 " CPXIO2:%d,"
766 " FIFO_OVF:%d,"
767 "\n",
768 (csi2_irqstatus &
769 ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0,
770 (csi2_irqstatus &
771 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ? 1 : 0,
772 (csi2_irqstatus &
773 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ? 1 : 0,
774 (csi2_irqstatus &
775 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ? 1 : 0,
776 (csi2_irqstatus &
777 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ? 1 : 0);
778 retval = -EIO;
779 }
780
781 if (omap3isp_module_sync_is_stopping(&csi2->wait, &csi2->stopping))
782 return 0;
783
784 /* Successful cases */
785 if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0))
786 csi2_isr_ctx(csi2, &csi2->contexts[0]);
787
788 if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ)
789 dev_dbg(isp->dev, "CSI2: ECC correction done\n");
790
791 return retval;
792 }
793
794 /* -----------------------------------------------------------------------------
795 * ISP video operations
796 */
797
798 /*
799 * csi2_queue - Queues the first buffer when using memory output
800 * @video: The video node
801 * @buffer: buffer to queue
802 */
803 static int csi2_queue(struct isp_video *video, struct isp_buffer *buffer)
804 {
805 struct isp_device *isp = video->isp;
806 struct isp_csi2_device *csi2 = &isp->isp_csi2a;
807
808 csi2_set_outaddr(csi2, buffer->isp_addr);
809
810 /*
811 * If streaming was enabled before there was a buffer queued
812 * or underrun happened in the ISR, the hardware was not enabled
813 * and DMA queue flag ISP_VIDEO_DMAQUEUE_UNDERRUN is still set.
814 * Enable it now.
815 */
816 if (csi2->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) {
817 /* Enable / disable context 0 and IRQs */
818 csi2_if_enable(isp, csi2, 1);
819 csi2_ctx_enable(isp, csi2, 0, 1);
820 isp_video_dmaqueue_flags_clr(&csi2->video_out);
821 }
822
823 return 0;
824 }
825
826 static const struct isp_video_operations csi2_ispvideo_ops = {
827 .queue = csi2_queue,
828 };
829
830 /* -----------------------------------------------------------------------------
831 * V4L2 subdev operations
832 */
833
834 static struct v4l2_mbus_framefmt *
835 __csi2_get_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh,
836 unsigned int pad, enum v4l2_subdev_format_whence which)
837 {
838 if (which == V4L2_SUBDEV_FORMAT_TRY)
839 return v4l2_subdev_get_try_format(fh, pad);
840 else
841 return &csi2->formats[pad];
842 }
843
844 static void
845 csi2_try_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh,
846 unsigned int pad, struct v4l2_mbus_framefmt *fmt,
847 enum v4l2_subdev_format_whence which)
848 {
849 enum v4l2_mbus_pixelcode pixelcode;
850 struct v4l2_mbus_framefmt *format;
851 const struct isp_format_info *info;
852 unsigned int i;
853
854 switch (pad) {
855 case CSI2_PAD_SINK:
856 /* Clamp the width and height to valid range (1-8191). */
857 for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) {
858 if (fmt->code == csi2_input_fmts[i])
859 break;
860 }
861
862 /* If not found, use SGRBG10 as default */
863 if (i >= ARRAY_SIZE(csi2_input_fmts))
864 fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
865
866 fmt->width = clamp_t(u32, fmt->width, 1, 8191);
867 fmt->height = clamp_t(u32, fmt->height, 1, 8191);
868 break;
869
870 case CSI2_PAD_SOURCE:
871 /* Source format same as sink format, except for DPCM
872 * compression.
873 */
874 pixelcode = fmt->code;
875 format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, which);
876 memcpy(fmt, format, sizeof(*fmt));
877
878 /*
879 * Only Allow DPCM decompression, and check that the
880 * pattern is preserved
881 */
882 info = omap3isp_video_format_info(fmt->code);
883 if (info->uncompressed == pixelcode)
884 fmt->code = pixelcode;
885 break;
886 }
887
888 /* RGB, non-interlaced */
889 fmt->colorspace = V4L2_COLORSPACE_SRGB;
890 fmt->field = V4L2_FIELD_NONE;
891 }
892
893 /*
894 * csi2_enum_mbus_code - Handle pixel format enumeration
895 * @sd : pointer to v4l2 subdev structure
896 * @fh : V4L2 subdev file handle
897 * @code : pointer to v4l2_subdev_mbus_code_enum structure
898 * return -EINVAL or zero on success
899 */
900 static int csi2_enum_mbus_code(struct v4l2_subdev *sd,
901 struct v4l2_subdev_fh *fh,
902 struct v4l2_subdev_mbus_code_enum *code)
903 {
904 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
905 struct v4l2_mbus_framefmt *format;
906 const struct isp_format_info *info;
907
908 if (code->pad == CSI2_PAD_SINK) {
909 if (code->index >= ARRAY_SIZE(csi2_input_fmts))
910 return -EINVAL;
911
912 code->code = csi2_input_fmts[code->index];
913 } else {
914 format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK,
915 V4L2_SUBDEV_FORMAT_TRY);
916 switch (code->index) {
917 case 0:
918 /* Passthrough sink pad code */
919 code->code = format->code;
920 break;
921 case 1:
922 /* Uncompressed code */
923 info = omap3isp_video_format_info(format->code);
924 if (info->uncompressed == format->code)
925 return -EINVAL;
926
927 code->code = info->uncompressed;
928 break;
929 default:
930 return -EINVAL;
931 }
932 }
933
934 return 0;
935 }
936
937 static int csi2_enum_frame_size(struct v4l2_subdev *sd,
938 struct v4l2_subdev_fh *fh,
939 struct v4l2_subdev_frame_size_enum *fse)
940 {
941 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
942 struct v4l2_mbus_framefmt format;
943
944 if (fse->index != 0)
945 return -EINVAL;
946
947 format.code = fse->code;
948 format.width = 1;
949 format.height = 1;
950 csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
951 fse->min_width = format.width;
952 fse->min_height = format.height;
953
954 if (format.code != fse->code)
955 return -EINVAL;
956
957 format.code = fse->code;
958 format.width = -1;
959 format.height = -1;
960 csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
961 fse->max_width = format.width;
962 fse->max_height = format.height;
963
964 return 0;
965 }
966
967 /*
968 * csi2_get_format - Handle get format by pads subdev method
969 * @sd : pointer to v4l2 subdev structure
970 * @fh : V4L2 subdev file handle
971 * @fmt: pointer to v4l2 subdev format structure
972 * return -EINVAL or zero on sucess
973 */
974 static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
975 struct v4l2_subdev_format *fmt)
976 {
977 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
978 struct v4l2_mbus_framefmt *format;
979
980 format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which);
981 if (format == NULL)
982 return -EINVAL;
983
984 fmt->format = *format;
985 return 0;
986 }
987
988 /*
989 * csi2_set_format - Handle set format by pads subdev method
990 * @sd : pointer to v4l2 subdev structure
991 * @fh : V4L2 subdev file handle
992 * @fmt: pointer to v4l2 subdev format structure
993 * return -EINVAL or zero on success
994 */
995 static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
996 struct v4l2_subdev_format *fmt)
997 {
998 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
999 struct v4l2_mbus_framefmt *format;
1000
1001 format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which);
1002 if (format == NULL)
1003 return -EINVAL;
1004
1005 csi2_try_format(csi2, fh, fmt->pad, &fmt->format, fmt->which);
1006 *format = fmt->format;
1007
1008 /* Propagate the format from sink to source */
1009 if (fmt->pad == CSI2_PAD_SINK) {
1010 format = __csi2_get_format(csi2, fh, CSI2_PAD_SOURCE,
1011 fmt->which);
1012 *format = fmt->format;
1013 csi2_try_format(csi2, fh, CSI2_PAD_SOURCE, format, fmt->which);
1014 }
1015
1016 return 0;
1017 }
1018
1019 /*
1020 * csi2_init_formats - Initialize formats on all pads
1021 * @sd: ISP CSI2 V4L2 subdevice
1022 * @fh: V4L2 subdev file handle
1023 *
1024 * Initialize all pad formats with default values. If fh is not NULL, try
1025 * formats are initialized on the file handle. Otherwise active formats are
1026 * initialized on the device.
1027 */
1028 static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1029 {
1030 struct v4l2_subdev_format format;
1031
1032 memset(&format, 0, sizeof(format));
1033 format.pad = CSI2_PAD_SINK;
1034 format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
1035 format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
1036 format.format.width = 4096;
1037 format.format.height = 4096;
1038 csi2_set_format(sd, fh, &format);
1039
1040 return 0;
1041 }
1042
1043 /*
1044 * csi2_set_stream - Enable/Disable streaming on the CSI2 module
1045 * @sd: ISP CSI2 V4L2 subdevice
1046 * @enable: ISP pipeline stream state
1047 *
1048 * Return 0 on success or a negative error code otherwise.
1049 */
1050 static int csi2_set_stream(struct v4l2_subdev *sd, int enable)
1051 {
1052 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
1053 struct isp_device *isp = csi2->isp;
1054 struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
1055 struct isp_video *video_out = &csi2->video_out;
1056
1057 switch (enable) {
1058 case ISP_PIPELINE_STREAM_CONTINUOUS:
1059 if (omap3isp_csiphy_acquire(csi2->phy) < 0)
1060 return -ENODEV;
1061 csi2->use_fs_irq = pipe->do_propagation;
1062 if (csi2->output & CSI2_OUTPUT_MEMORY)
1063 omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
1064 csi2_configure(csi2);
1065 csi2_print_status(csi2);
1066
1067 /*
1068 * When outputting to memory with no buffer available, let the
1069 * buffer queue handler start the hardware. A DMA queue flag
1070 * ISP_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is
1071 * a buffer available.
1072 */
1073 if (csi2->output & CSI2_OUTPUT_MEMORY &&
1074 !(video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED))
1075 break;
1076 /* Enable context 0 and IRQs */
1077 atomic_set(&csi2->stopping, 0);
1078 csi2_ctx_enable(isp, csi2, 0, 1);
1079 csi2_if_enable(isp, csi2, 1);
1080 isp_video_dmaqueue_flags_clr(video_out);
1081 break;
1082
1083 case ISP_PIPELINE_STREAM_STOPPED:
1084 if (csi2->state == ISP_PIPELINE_STREAM_STOPPED)
1085 return 0;
1086 if (omap3isp_module_sync_idle(&sd->entity, &csi2->wait,
1087 &csi2->stopping))
1088 dev_dbg(isp->dev, "%s: module stop timeout.\n",
1089 sd->name);
1090 csi2_ctx_enable(isp, csi2, 0, 0);
1091 csi2_if_enable(isp, csi2, 0);
1092 csi2_irq_ctx_set(isp, csi2, 0);
1093 omap3isp_csiphy_release(csi2->phy);
1094 isp_video_dmaqueue_flags_clr(video_out);
1095 omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
1096 break;
1097 }
1098
1099 csi2->state = enable;
1100 return 0;
1101 }
1102
1103 /* subdev video operations */
1104 static const struct v4l2_subdev_video_ops csi2_video_ops = {
1105 .s_stream = csi2_set_stream,
1106 };
1107
1108 /* subdev pad operations */
1109 static const struct v4l2_subdev_pad_ops csi2_pad_ops = {
1110 .enum_mbus_code = csi2_enum_mbus_code,
1111 .enum_frame_size = csi2_enum_frame_size,
1112 .get_fmt = csi2_get_format,
1113 .set_fmt = csi2_set_format,
1114 };
1115
1116 /* subdev operations */
1117 static const struct v4l2_subdev_ops csi2_ops = {
1118 .video = &csi2_video_ops,
1119 .pad = &csi2_pad_ops,
1120 };
1121
1122 /* subdev internal operations */
1123 static const struct v4l2_subdev_internal_ops csi2_internal_ops = {
1124 .open = csi2_init_formats,
1125 };
1126
1127 /* -----------------------------------------------------------------------------
1128 * Media entity operations
1129 */
1130
1131 /*
1132 * csi2_link_setup - Setup CSI2 connections.
1133 * @entity : Pointer to media entity structure
1134 * @local : Pointer to local pad array
1135 * @remote : Pointer to remote pad array
1136 * @flags : Link flags
1137 * return -EINVAL or zero on success
1138 */
1139 static int csi2_link_setup(struct media_entity *entity,
1140 const struct media_pad *local,
1141 const struct media_pad *remote, u32 flags)
1142 {
1143 struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1144 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
1145 struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl;
1146
1147 /*
1148 * The ISP core doesn't support pipelines with multiple video outputs.
1149 * Revisit this when it will be implemented, and return -EBUSY for now.
1150 */
1151
1152 switch (local->index | media_entity_type(remote->entity)) {
1153 case CSI2_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
1154 if (flags & MEDIA_LNK_FL_ENABLED) {
1155 if (csi2->output & ~CSI2_OUTPUT_MEMORY)
1156 return -EBUSY;
1157 csi2->output |= CSI2_OUTPUT_MEMORY;
1158 } else {
1159 csi2->output &= ~CSI2_OUTPUT_MEMORY;
1160 }
1161 break;
1162
1163 case CSI2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
1164 if (flags & MEDIA_LNK_FL_ENABLED) {
1165 if (csi2->output & ~CSI2_OUTPUT_CCDC)
1166 return -EBUSY;
1167 csi2->output |= CSI2_OUTPUT_CCDC;
1168 } else {
1169 csi2->output &= ~CSI2_OUTPUT_CCDC;
1170 }
1171 break;
1172
1173 default:
1174 /* Link from camera to CSI2 is fixed... */
1175 return -EINVAL;
1176 }
1177
1178 ctrl->vp_only_enable =
1179 (csi2->output & CSI2_OUTPUT_MEMORY) ? false : true;
1180 ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_CCDC);
1181
1182 return 0;
1183 }
1184
1185 /* media operations */
1186 static const struct media_entity_operations csi2_media_ops = {
1187 .link_setup = csi2_link_setup,
1188 };
1189
1190 /*
1191 * csi2_init_entities - Initialize subdev and media entity.
1192 * @csi2: Pointer to csi2 structure.
1193 * return -ENOMEM or zero on success
1194 */
1195 static int csi2_init_entities(struct isp_csi2_device *csi2)
1196 {
1197 struct v4l2_subdev *sd = &csi2->subdev;
1198 struct media_pad *pads = csi2->pads;
1199 struct media_entity *me = &sd->entity;
1200 int ret;
1201
1202 v4l2_subdev_init(sd, &csi2_ops);
1203 sd->internal_ops = &csi2_internal_ops;
1204 strlcpy(sd->name, "OMAP3 ISP CSI2a", sizeof(sd->name));
1205
1206 sd->grp_id = 1 << 16; /* group ID for isp subdevs */
1207 v4l2_set_subdevdata(sd, csi2);
1208 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1209
1210 pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
1211 pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
1212
1213 me->ops = &csi2_media_ops;
1214 ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0);
1215 if (ret < 0)
1216 return ret;
1217
1218 csi2_init_formats(sd, NULL);
1219
1220 /* Video device node */
1221 csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1222 csi2->video_out.ops = &csi2_ispvideo_ops;
1223 csi2->video_out.bpl_alignment = 32;
1224 csi2->video_out.bpl_zero_padding = 1;
1225 csi2->video_out.bpl_max = 0x1ffe0;
1226 csi2->video_out.isp = csi2->isp;
1227 csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
1228
1229 ret = omap3isp_video_init(&csi2->video_out, "CSI2a");
1230 if (ret < 0)
1231 return ret;
1232
1233 /* Connect the CSI2 subdev to the video node. */
1234 ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE,
1235 &csi2->video_out.video.entity, 0, 0);
1236 if (ret < 0)
1237 return ret;
1238
1239 return 0;
1240 }
1241
1242 void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
1243 {
1244 media_entity_cleanup(&csi2->subdev.entity);
1245
1246 v4l2_device_unregister_subdev(&csi2->subdev);
1247 omap3isp_video_unregister(&csi2->video_out);
1248 }
1249
1250 int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
1251 struct v4l2_device *vdev)
1252 {
1253 int ret;
1254
1255 /* Register the subdev and video nodes. */
1256 ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
1257 if (ret < 0)
1258 goto error;
1259
1260 ret = omap3isp_video_register(&csi2->video_out, vdev);
1261 if (ret < 0)
1262 goto error;
1263
1264 return 0;
1265
1266 error:
1267 omap3isp_csi2_unregister_entities(csi2);
1268 return ret;
1269 }
1270
1271 /* -----------------------------------------------------------------------------
1272 * ISP CSI2 initialisation and cleanup
1273 */
1274
1275 /*
1276 * omap3isp_csi2_cleanup - Routine for module driver cleanup
1277 */
1278 void omap3isp_csi2_cleanup(struct isp_device *isp)
1279 {
1280 }
1281
1282 /*
1283 * omap3isp_csi2_init - Routine for module driver init
1284 */
1285 int omap3isp_csi2_init(struct isp_device *isp)
1286 {
1287 struct isp_csi2_device *csi2a = &isp->isp_csi2a;
1288 struct isp_csi2_device *csi2c = &isp->isp_csi2c;
1289 int ret;
1290
1291 csi2a->isp = isp;
1292 csi2a->available = 1;
1293 csi2a->regs1 = OMAP3_ISP_IOMEM_CSI2A_REGS1;
1294 csi2a->regs2 = OMAP3_ISP_IOMEM_CSI2A_REGS2;
1295 csi2a->phy = &isp->isp_csiphy2;
1296 csi2a->state = ISP_PIPELINE_STREAM_STOPPED;
1297 init_waitqueue_head(&csi2a->wait);
1298
1299 ret = csi2_init_entities(csi2a);
1300 if (ret < 0)
1301 goto fail;
1302
1303 if (isp->revision == ISP_REVISION_15_0) {
1304 csi2c->isp = isp;
1305 csi2c->available = 1;
1306 csi2c->regs1 = OMAP3_ISP_IOMEM_CSI2C_REGS1;
1307 csi2c->regs2 = OMAP3_ISP_IOMEM_CSI2C_REGS2;
1308 csi2c->phy = &isp->isp_csiphy1;
1309 csi2c->state = ISP_PIPELINE_STREAM_STOPPED;
1310 init_waitqueue_head(&csi2c->wait);
1311 }
1312
1313 return 0;
1314 fail:
1315 omap3isp_csi2_cleanup(isp);
1316 return ret;
1317 }
CRIS linux kernel tree