drivers/media/video/pvrusb2/pvrusb2-encoder.c

   1 /*
   2  *
   3  *
   4  *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
   5  *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *  GNU General Public License for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License
  17  *  along with this program; if not, write to the Free Software
  18  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  *
  20  */
  21
  22 #include <linux/device.h>   // for linux/firmware.h
  23 #include <linux/firmware.h>
  24 #include "pvrusb2-util.h"
  25 #include "pvrusb2-encoder.h"
  26 #include "pvrusb2-hdw-internal.h"
  27 #include "pvrusb2-debug.h"
  28 #include "pvrusb2-fx2-cmd.h"
  29
  30
  31
  32 /* Firmware mailbox flags - definitions found from ivtv */
  33 #define IVTV_MBOX_FIRMWARE_DONE 0x00000004
  34 #define IVTV_MBOX_DRIVER_DONE 0x00000002
  35 #define IVTV_MBOX_DRIVER_BUSY 0x00000001
  36
  37 #define MBOX_BASE 0x44
  38
  39
  40 static int pvr2_encoder_write_words(struct pvr2_hdw *hdw,
  41                                     unsigned int offs,
  42                                     const u32 *data, unsigned int dlen)
  43 {
  44         unsigned int idx,addr;
  45         unsigned int bAddr;
  46         int ret;
  47         unsigned int chunkCnt;
  48
  49         /*
  50
  51         Format: First byte must be 0x01.  Remaining 32 bit words are
  52         spread out into chunks of 7 bytes each, with the first 4 bytes
  53         being the data word (little endian), and the next 3 bytes
  54         being the address where that data word is to be written (big
  55         endian).  Repeat request for additional words, with offset
  56         adjusted accordingly.
  57
  58         */
  59         while (dlen) {
  60                 chunkCnt = 8;
  61                 if (chunkCnt > dlen) chunkCnt = dlen;
  62                 memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
  63                 bAddr = 0;
  64                 hdw->cmd_buffer[bAddr++] = FX2CMD_MEM_WRITE_DWORD;
  65                 for (idx = 0; idx < chunkCnt; idx++) {
  66                         addr = idx + offs;
  67                         hdw->cmd_buffer[bAddr+6] = (addr & 0xffu);
  68                         hdw->cmd_buffer[bAddr+5] = ((addr>>8) & 0xffu);
  69                         hdw->cmd_buffer[bAddr+4] = ((addr>>16) & 0xffu);
  70                         PVR2_DECOMPOSE_LE(hdw->cmd_buffer, bAddr,data[idx]);
  71                         bAddr += 7;
  72                 }
  73                 ret = pvr2_send_request(hdw,
  74                                         hdw->cmd_buffer,1+(chunkCnt*7),
  75                                         NULL,0);
  76                 if (ret) return ret;
  77                 data += chunkCnt;
  78                 dlen -= chunkCnt;
  79                 offs += chunkCnt;
  80         }
  81
  82         return 0;
  83 }
  84
  85
  86 static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,
  87                                    unsigned int offs,
  88                                    u32 *data, unsigned int dlen)
  89 {
  90         unsigned int idx;
  91         int ret;
  92         unsigned int chunkCnt;
  93
  94         /*
  95
  96         Format: First byte must be 0x02 (status check) or 0x28 (read
  97         back block of 32 bit words).  Next 6 bytes must be zero,
  98         followed by a single byte of MBOX_BASE+offset for portion to
  99         be read.  Returned data is packed set of 32 bits words that
 100         were read.
 101
 102         */
 103
 104         while (dlen) {
 105                 chunkCnt = 16;
 106                 if (chunkCnt > dlen) chunkCnt = dlen;
 107                 if (chunkCnt < 16) chunkCnt = 1;
 108                 hdw->cmd_buffer[0] =
 109                         ((chunkCnt == 1) ?
 110                          FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
 111                 hdw->cmd_buffer[1] = 0;
 112                 hdw->cmd_buffer[2] = 0;
 113                 hdw->cmd_buffer[3] = 0;
 114                 hdw->cmd_buffer[4] = 0;
 115                 hdw->cmd_buffer[5] = ((offs>>16) & 0xffu);
 116                 hdw->cmd_buffer[6] = ((offs>>8) & 0xffu);
 117                 hdw->cmd_buffer[7] = (offs & 0xffu);
 118                 ret = pvr2_send_request(hdw,
 119                                         hdw->cmd_buffer,8,
 120                                         hdw->cmd_buffer,
 121                                         (chunkCnt == 1 ? 4 : 16 * 4));
 122                 if (ret) return ret;
 123
 124                 for (idx = 0; idx < chunkCnt; idx++) {
 125                         data[idx] = PVR2_COMPOSE_LE(hdw->cmd_buffer,idx*4);
 126                 }
 127                 data += chunkCnt;
 128                 dlen -= chunkCnt;
 129                 offs += chunkCnt;
 130         }
 131
 132         return 0;
 133 }
 134
 135
 136 /* This prototype is set up to be compatible with the
 137    cx2341x_mbox_func prototype in cx2341x.h, which should be in
 138    kernels 2.6.18 or later.  We do this so that we can enable
 139    cx2341x.ko to write to our encoder (by handing it a pointer to this
 140    function).  For earlier kernels this doesn't really matter. */
 141 static int pvr2_encoder_cmd(void *ctxt,
 142                             u32 cmd,
 143                             int arg_cnt_send,
 144                             int arg_cnt_recv,
 145                             u32 *argp)
 146 {
 147         unsigned int poll_count;
 148         unsigned int try_count = 0;
 149         int retry_flag;
 150         int ret = 0;
 151         unsigned int idx;
 152         /* These sizes look to be limited by the FX2 firmware implementation */
 153         u32 wrData[16];
 154         u32 rdData[16];
 155         struct pvr2_hdw *hdw = (struct pvr2_hdw *)ctxt;
 156
 157
 158         /*
 159
 160         The encoder seems to speak entirely using blocks 32 bit words.
 161         In ivtv driver terms, this is a mailbox at MBOX_BASE which we
 162         populate with data and watch what the hardware does with it.
 163         The first word is a set of flags used to control the
 164         transaction, the second word is the command to execute, the
 165         third byte is zero (ivtv driver suggests that this is some
 166         kind of return value), and the fourth byte is a specified
 167         timeout (windows driver always uses 0x00060000 except for one
 168         case when it is zero).  All successive words are the argument
 169         words for the command.
 170
 171         First, write out the entire set of words, with the first word
 172         being zero.
 173
 174         Next, write out just the first word again, but set it to
 175         IVTV_MBOX_DRIVER_DONE | IVTV_DRIVER_BUSY this time (which
 176         probably means "go").
 177
 178         Next, read back the return count words.  Check the first word,
 179         which should have IVTV_MBOX_FIRMWARE_DONE set.  If however
 180         that bit is not set, then the command isn't done so repeat the
 181         read until it is set.
 182
 183         Finally, write out just the first word again, but set it to
 184         0x0 this time (which probably means "idle").
 185
 186         */
 187
 188         if (arg_cnt_send > (ARRAY_SIZE(wrData) - 4)) {
 189                 pvr2_trace(
 190                         PVR2_TRACE_ERROR_LEGS,
 191                         "Failed to write cx23416 command"
 192                         " - too many input arguments"
 193                         " (was given %u limit %lu)",
 194                         arg_cnt_send, (long unsigned) ARRAY_SIZE(wrData) - 4);
 195                 return -EINVAL;
 196         }
 197
 198         if (arg_cnt_recv > (ARRAY_SIZE(rdData) - 4)) {
 199                 pvr2_trace(
 200                         PVR2_TRACE_ERROR_LEGS,
 201                         "Failed to write cx23416 command"
 202                         " - too many return arguments"
 203                         " (was given %u limit %lu)",
 204                         arg_cnt_recv, (long unsigned) ARRAY_SIZE(rdData) - 4);
 205                 return -EINVAL;
 206         }
 207
 208
 209         LOCK_TAKE(hdw->ctl_lock); do {
 210
 211                 if (!hdw->state_encoder_ok) {
 212                         ret = -EIO;
 213                         break;
 214                 }
 215
 216                 retry_flag = 0;
 217                 try_count++;
 218                 ret = 0;
 219                 wrData[0] = 0;
 220                 wrData[1] = cmd;
 221                 wrData[2] = 0;
 222                 wrData[3] = 0x00060000;
 223                 for (idx = 0; idx < arg_cnt_send; idx++) {
 224                         wrData[idx+4] = argp[idx];
 225                 }
 226                 for (; idx < ARRAY_SIZE(wrData) - 4; idx++) {
 227                         wrData[idx+4] = 0;
 228                 }
 229
 230                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,idx);
 231                 if (ret) break;
 232                 wrData[0] = IVTV_MBOX_DRIVER_DONE|IVTV_MBOX_DRIVER_BUSY;
 233                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
 234                 if (ret) break;
 235                 poll_count = 0;
 236                 while (1) {
 237                         poll_count++;
 238                         ret = pvr2_encoder_read_words(hdw,MBOX_BASE,rdData,
 239                                                       arg_cnt_recv+4);
 240                         if (ret) {
 241                                 break;
 242                         }
 243                         if (rdData[0] & IVTV_MBOX_FIRMWARE_DONE) {
 244                                 break;
 245                         }
 246                         if (rdData[0] && (poll_count < 1000)) continue;
 247                         if (!rdData[0]) {
 248                                 retry_flag = !0;
 249                                 pvr2_trace(
 250                                         PVR2_TRACE_ERROR_LEGS,
 251                                         "Encoder timed out waiting for us"
 252                                         "; arranging to retry");
 253                         } else {
 254                                 pvr2_trace(
 255                                         PVR2_TRACE_ERROR_LEGS,
 256                                         "***WARNING*** device's encoder"
 257                                         " appears to be stuck"
 258                                         " (status=0x%08x)",rdData[0]);
 259                         }
 260                         pvr2_trace(
 261                                 PVR2_TRACE_ERROR_LEGS,
 262                                 "Encoder command: 0x%02x",cmd);
 263                         for (idx = 4; idx < arg_cnt_send; idx++) {
 264                                 pvr2_trace(
 265                                         PVR2_TRACE_ERROR_LEGS,
 266                                         "Encoder arg%d: 0x%08x",
 267                                         idx-3,wrData[idx]);
 268                         }
 269                         ret = -EBUSY;
 270                         break;
 271                 }
 272                 if (retry_flag) {
 273                         if (try_count < 20) continue;
 274                         pvr2_trace(
 275                                 PVR2_TRACE_ERROR_LEGS,
 276                                 "Too many retries...");
 277                         ret = -EBUSY;
 278                 }
 279                 if (ret) {
 280                         del_timer_sync(&hdw->encoder_run_timer);
 281                         hdw->state_encoder_ok = 0;
 282                         pvr2_trace(PVR2_TRACE_STBITS,
 283                                    "State bit %s <-- %s",
 284                                    "state_encoder_ok",
 285                                    (hdw->state_encoder_ok ? "true" : "false"));
 286                         if (hdw->state_encoder_runok) {
 287                                 hdw->state_encoder_runok = 0;
 288                                 pvr2_trace(PVR2_TRACE_STBITS,
 289                                    "State bit %s <-- %s",
 290                                            "state_encoder_runok",
 291                                            (hdw->state_encoder_runok ?
 292                                             "true" : "false"));
 293                         }
 294                         pvr2_trace(
 295                                 PVR2_TRACE_ERROR_LEGS,
 296                                 "Giving up on command."
 297                                 "  This is normally recovered via a firmware"
 298                                 " reload and re-initialization; concern"
 299                                 " is only warranted if this happens repeatedly"
 300                                 " and rapidly.");
 301                         break;
 302                 }
 303                 wrData[0] = 0x7;
 304                 for (idx = 0; idx < arg_cnt_recv; idx++) {
 305                         argp[idx] = rdData[idx+4];
 306                 }
 307
 308                 wrData[0] = 0x0;
 309                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
 310                 if (ret) break;
 311
 312         } while(0); LOCK_GIVE(hdw->ctl_lock);
 313
 314         return ret;
 315 }
 316
 317
 318 static int pvr2_encoder_vcmd(struct pvr2_hdw *hdw, int cmd,
 319                              int args, ...)
 320 {
 321         va_list vl;
 322         unsigned int idx;
 323         u32 data[12];
 324
 325         if (args > ARRAY_SIZE(data)) {
 326                 pvr2_trace(
 327                         PVR2_TRACE_ERROR_LEGS,
 328                         "Failed to write cx23416 command"
 329                         " - too many arguments"
 330                         " (was given %u limit %lu)",
 331                         args, (long unsigned) ARRAY_SIZE(data));
 332                 return -EINVAL;
 333         }
 334
 335         va_start(vl, args);
 336         for (idx = 0; idx < args; idx++) {
 337                 data[idx] = va_arg(vl, u32);
 338         }
 339         va_end(vl);
 340
 341         return pvr2_encoder_cmd(hdw,cmd,args,0,data);
 342 }
 343
 344
 345 /* This implements some extra setup for the encoder that seems to be
 346    specific to the PVR USB2 hardware. */
 347 static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw)
 348 {
 349         int ret = 0;
 350         int encMisc3Arg = 0;
 351
 352 #if 0
 353         /* This inexplicable bit happens in the Hauppauge windows
 354            driver (for both 24xxx and 29xxx devices).  However I
 355            currently see no difference in behavior with or without
 356            this stuff.  Leave this here as a note of its existence,
 357            but don't use it. */
 358         LOCK_TAKE(hdw->ctl_lock); do {
 359                 u32 dat[1];
 360                 dat[0] = 0x80000640;
 361                 pvr2_encoder_write_words(hdw,0x01fe,dat,1);
 362                 pvr2_encoder_write_words(hdw,0x023e,dat,1);
 363         } while(0); LOCK_GIVE(hdw->ctl_lock);
 364 #endif
 365
 366         /* Mike Isely <isely@pobox.com> 26-Jan-2006 The windows driver
 367            sends the following list of ENC_MISC commands (for both
 368            24xxx and 29xxx devices).  Meanings are not entirely clear,
 369            however without the ENC_MISC(3,1) command then we risk
 370            random perpetual video corruption whenever the video input
 371            breaks up for a moment (like when switching channels). */
 372
 373
 374 #if 0
 375         /* This ENC_MISC(5,0) command seems to hurt 29xxx sync
 376            performance on channel changes, but is not a problem on
 377            24xxx devices. */
 378         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 5,0,0,0);
 379 #endif
 380
 381         /* This ENC_MISC(3,encMisc3Arg) command is critical - without
 382            it there will eventually be video corruption.  Also, the
 383            saa7115 case is strange - the Windows driver is passing 1
 384            regardless of device type but if we have 1 for saa7115
 385            devices the video turns sluggish.  */
 386         if (hdw->hdw_desc->flag_has_cx25840) {
 387                 encMisc3Arg = 1;
 388         } else {
 389                 encMisc3Arg = 0;
 390         }
 391         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 3,
 392                                  encMisc3Arg,0,0);
 393
 394         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 8,0,0,0);
 395
 396 #if 0
 397         /* This ENC_MISC(4,1) command is poisonous, so it is commented
 398            out.  But I'm leaving it here anyway to document its
 399            existence in the Windows driver.  The effect of this
 400            command is that apps displaying the stream become sluggish
 401            with stuttering video. */
 402         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 4,1,0,0);
 403 #endif
 404
 405         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 0,3,0,0);
 406         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4,15,0,0,0);
 407
 408         /* prevent the PTSs from slowly drifting away in the generated
 409            MPEG stream */
 410         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC, 2, 4, 1);
 411
 412         return ret;
 413 }
 414
 415 int pvr2_encoder_adjust(struct pvr2_hdw *hdw)
 416 {
 417         int ret;
 418         ret = cx2341x_update(hdw,pvr2_encoder_cmd,
 419                              (hdw->enc_cur_valid ? &hdw->enc_cur_state : NULL),
 420                              &hdw->enc_ctl_state);
 421         if (ret) {
 422                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 423                            "Error from cx2341x module code=%d",ret);
 424         } else {
 425                 memcpy(&hdw->enc_cur_state,&hdw->enc_ctl_state,
 426                        sizeof(struct cx2341x_mpeg_params));
 427                 hdw->enc_cur_valid = !0;
 428         }
 429         return ret;
 430 }
 431
 432
 433 int pvr2_encoder_configure(struct pvr2_hdw *hdw)
 434 {
 435         int ret;
 436         int val;
 437         pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure"
 438                    " (cx2341x module)");
 439         hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING;
 440         hdw->enc_ctl_state.width = hdw->res_hor_val;
 441         hdw->enc_ctl_state.height = hdw->res_ver_val;
 442         hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & V4L2_STD_525_60) ?
 443                                       0 : 1);
 444
 445         ret = 0;
 446
 447         ret |= pvr2_encoder_prep_config(hdw);
 448
 449         /* saa7115: 0xf0 */
 450         val = 0xf0;
 451         if (hdw->hdw_desc->flag_has_cx25840) {
 452                 /* ivtv cx25840: 0x140 */
 453                 val = 0x140;
 454         }
 455
 456         if (!ret) ret = pvr2_encoder_vcmd(
 457                 hdw,CX2341X_ENC_SET_NUM_VSYNC_LINES, 2,
 458                 val, val);
 459
 460         /* setup firmware to notify us about some events (don't know why...) */
 461         if (!ret) ret = pvr2_encoder_vcmd(
 462                 hdw,CX2341X_ENC_SET_EVENT_NOTIFICATION, 4,
 463                 0, 0, 0x10000000, 0xffffffff);
 464
 465         if (!ret) ret = pvr2_encoder_vcmd(
 466                 hdw,CX2341X_ENC_SET_VBI_LINE, 5,
 467                 0xffffffff,0,0,0,0);
 468
 469         if (ret) {
 470                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 471                            "Failed to configure cx23416");
 472                 return ret;
 473         }
 474
 475         ret = pvr2_encoder_adjust(hdw);
 476         if (ret) return ret;
 477
 478         ret = pvr2_encoder_vcmd(
 479                 hdw, CX2341X_ENC_INITIALIZE_INPUT, 0);
 480
 481         if (ret) {
 482                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 483                            "Failed to initialize cx23416 video input");
 484                 return ret;
 485         }
 486
 487         return 0;
 488 }
 489
 490
 491 int pvr2_encoder_start(struct pvr2_hdw *hdw)
 492 {
 493         int status;
 494
 495         /* unmask some interrupts */
 496         pvr2_write_register(hdw, 0x0048, 0xbfffffff);
 497
 498         pvr2_encoder_vcmd(hdw,CX2341X_ENC_MUTE_VIDEO,1,
 499                           hdw->input_val == PVR2_CVAL_INPUT_RADIO ? 1 : 0);
 500
 501         switch (hdw->active_stream_type) {
 502         case pvr2_config_vbi:
 503                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 504                                            0x01,0x14);
 505                 break;
 506         case pvr2_config_mpeg:
 507                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 508                                            0,0x13);
 509                 break;
 510         default: /* Unhandled cases for now */
 511                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 512                                            0,0x13);
 513                 break;
 514         }
 515         return status;
 516 }
 517
 518 int pvr2_encoder_stop(struct pvr2_hdw *hdw)
 519 {
 520         int status;
 521
 522         /* mask all interrupts */
 523         pvr2_write_register(hdw, 0x0048, 0xffffffff);
 524
 525         switch (hdw->active_stream_type) {
 526         case pvr2_config_vbi:
 527                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 528                                            0x01,0x01,0x14);
 529                 break;
 530         case pvr2_config_mpeg:
 531                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 532                                            0x01,0,0x13);
 533                 break;
 534         default: /* Unhandled cases for now */
 535                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 536                                            0x01,0,0x13);
 537                 break;
 538         }
 539
 540         return status;
 541 }
 542
 543
 544 /*
 545   Stuff for Emacs to see, in order to encourage consistent editing style:
 546   *** Local Variables: ***
 547   *** mode: c ***
 548   *** fill-column: 70 ***
 549   *** tab-width: 8 ***
 550   *** c-basic-offset: 8 ***
 551   *** End: ***
 552   */