FRV: Use generic show_interrupts()
[cris-mirror.git] / drivers / media / video / w9966.c
blobfa35639d0c150bd6851a6c80cd393b464ca92eb9
1 /*
2 Winbond w9966cf Webcam parport driver.
4 Version 0.33
6 Copyright (C) 2001 Jakob Kemi <jakob.kemi@post.utfors.se>
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 Supported devices:
24 *Lifeview FlyCam Supra (using the Philips saa7111a chip)
26 Does any other model using the w9966 interface chip exist ?
28 Todo:
30 *Add a working EPP mode, since DMA ECP read isn't implemented
31 in the parport drivers. (That's why it's so sloow)
33 *Add support for other ccd-control chips than the saa7111
34 please send me feedback on what kind of chips you have.
36 *Add proper probing. I don't know what's wrong with the IEEE1284
37 parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID)
38 and nibble read seems to be broken for some peripherals.
40 *Add probing for onboard SRAM, port directions etc. (if possible)
42 *Add support for the hardware compressed modes (maybe using v4l2)
44 *Fix better support for the capture window (no skewed images, v4l
45 interface to capt. window)
47 *Probably some bugs that I don't know of
49 Please support me by sending feedback!
51 Changes:
53 Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE
54 and owner support for newer module locks
57 #include <linux/module.h>
58 #include <linux/init.h>
59 #include <linux/delay.h>
60 #include <linux/version.h>
61 #include <linux/videodev2.h>
62 #include <linux/slab.h>
63 #include <media/v4l2-common.h>
64 #include <media/v4l2-ioctl.h>
65 #include <media/v4l2-device.h>
66 #include <linux/parport.h>
68 /*#define DEBUG*/ /* Undef me for production */
70 #ifdef DEBUG
71 #define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a)
72 #else
73 #define DPRINTF(x...)
74 #endif
77 * Defines, simple typedefs etc.
80 #define W9966_DRIVERNAME "W9966CF Webcam"
81 #define W9966_MAXCAMS 4 /* Maximum number of cameras */
82 #define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */
83 #define W9966_SRAMSIZE 131072 /* 128kb */
84 #define W9966_SRAMID 0x02 /* check w9966cf.pdf */
86 /* Empirically determined window limits */
87 #define W9966_WND_MIN_X 16
88 #define W9966_WND_MIN_Y 14
89 #define W9966_WND_MAX_X 705
90 #define W9966_WND_MAX_Y 253
91 #define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X)
92 #define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y)
94 /* Keep track of our current state */
95 #define W9966_STATE_PDEV 0x01
96 #define W9966_STATE_CLAIMED 0x02
97 #define W9966_STATE_VDEV 0x04
99 #define W9966_I2C_W_ID 0x48
100 #define W9966_I2C_R_ID 0x49
101 #define W9966_I2C_R_DATA 0x08
102 #define W9966_I2C_R_CLOCK 0x04
103 #define W9966_I2C_W_DATA 0x02
104 #define W9966_I2C_W_CLOCK 0x01
106 struct w9966 {
107 struct v4l2_device v4l2_dev;
108 unsigned char dev_state;
109 unsigned char i2c_state;
110 unsigned short ppmode;
111 struct parport *pport;
112 struct pardevice *pdev;
113 struct video_device vdev;
114 unsigned short width;
115 unsigned short height;
116 unsigned char brightness;
117 signed char contrast;
118 signed char color;
119 signed char hue;
120 struct mutex lock;
124 * Module specific properties
127 MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>");
128 MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)");
129 MODULE_LICENSE("GPL");
132 #ifdef MODULE
133 static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""};
134 #else
135 static const char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"};
136 #endif
137 module_param_array(pardev, charp, NULL, 0);
138 MODULE_PARM_DESC(pardev, "pardev: where to search for\n"
139 "\teach camera. 'aggressive' means brute-force search.\n"
140 "\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n"
141 "\tcam 1 to parport3 and search every parport for cam 2 etc...");
143 static int parmode;
144 module_param(parmode, int, 0);
145 MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp");
147 static int video_nr = -1;
148 module_param(video_nr, int, 0);
150 static struct w9966 w9966_cams[W9966_MAXCAMS];
153 * Private function defines
157 /* Set camera phase flags, so we know what to uninit when terminating */
158 static inline void w9966_set_state(struct w9966 *cam, int mask, int val)
160 cam->dev_state = (cam->dev_state & ~mask) ^ val;
163 /* Get camera phase flags */
164 static inline int w9966_get_state(struct w9966 *cam, int mask, int val)
166 return ((cam->dev_state & mask) == val);
169 /* Claim parport for ourself */
170 static void w9966_pdev_claim(struct w9966 *cam)
172 if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED))
173 return;
174 parport_claim_or_block(cam->pdev);
175 w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED);
178 /* Release parport for others to use */
179 static void w9966_pdev_release(struct w9966 *cam)
181 if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0))
182 return;
183 parport_release(cam->pdev);
184 w9966_set_state(cam, W9966_STATE_CLAIMED, 0);
187 /* Read register from W9966 interface-chip
188 Expects a claimed pdev
189 -1 on error, else register data (byte) */
190 static int w9966_read_reg(struct w9966 *cam, int reg)
192 /* ECP, read, regtransfer, REG, REG, REG, REG, REG */
193 const unsigned char addr = 0x80 | (reg & 0x1f);
194 unsigned char val;
196 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
197 return -1;
198 if (parport_write(cam->pport, &addr, 1) != 1)
199 return -1;
200 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0)
201 return -1;
202 if (parport_read(cam->pport, &val, 1) != 1)
203 return -1;
205 return val;
208 /* Write register to W9966 interface-chip
209 Expects a claimed pdev
210 -1 on error */
211 static int w9966_write_reg(struct w9966 *cam, int reg, int data)
213 /* ECP, write, regtransfer, REG, REG, REG, REG, REG */
214 const unsigned char addr = 0xc0 | (reg & 0x1f);
215 const unsigned char val = data;
217 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
218 return -1;
219 if (parport_write(cam->pport, &addr, 1) != 1)
220 return -1;
221 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0)
222 return -1;
223 if (parport_write(cam->pport, &val, 1) != 1)
224 return -1;
226 return 0;
230 * Ugly and primitive i2c protocol functions
233 /* Sets the data line on the i2c bus.
234 Expects a claimed pdev. */
235 static void w9966_i2c_setsda(struct w9966 *cam, int state)
237 if (state)
238 cam->i2c_state |= W9966_I2C_W_DATA;
239 else
240 cam->i2c_state &= ~W9966_I2C_W_DATA;
242 w9966_write_reg(cam, 0x18, cam->i2c_state);
243 udelay(5);
246 /* Get peripheral clock line
247 Expects a claimed pdev. */
248 static int w9966_i2c_getscl(struct w9966 *cam)
250 const unsigned char state = w9966_read_reg(cam, 0x18);
251 return ((state & W9966_I2C_R_CLOCK) > 0);
254 /* Sets the clock line on the i2c bus.
255 Expects a claimed pdev. -1 on error */
256 static int w9966_i2c_setscl(struct w9966 *cam, int state)
258 unsigned long timeout;
260 if (state)
261 cam->i2c_state |= W9966_I2C_W_CLOCK;
262 else
263 cam->i2c_state &= ~W9966_I2C_W_CLOCK;
265 w9966_write_reg(cam, 0x18, cam->i2c_state);
266 udelay(5);
268 /* we go to high, we also expect the peripheral to ack. */
269 if (state) {
270 timeout = jiffies + 100;
271 while (!w9966_i2c_getscl(cam)) {
272 if (time_after(jiffies, timeout))
273 return -1;
276 return 0;
279 #if 0
280 /* Get peripheral data line
281 Expects a claimed pdev. */
282 static int w9966_i2c_getsda(struct w9966 *cam)
284 const unsigned char state = w9966_read_reg(cam, 0x18);
285 return ((state & W9966_I2C_R_DATA) > 0);
287 #endif
289 /* Write a byte with ack to the i2c bus.
290 Expects a claimed pdev. -1 on error */
291 static int w9966_i2c_wbyte(struct w9966 *cam, int data)
293 int i;
295 for (i = 7; i >= 0; i--) {
296 w9966_i2c_setsda(cam, (data >> i) & 0x01);
298 if (w9966_i2c_setscl(cam, 1) == -1)
299 return -1;
300 w9966_i2c_setscl(cam, 0);
303 w9966_i2c_setsda(cam, 1);
305 if (w9966_i2c_setscl(cam, 1) == -1)
306 return -1;
307 w9966_i2c_setscl(cam, 0);
309 return 0;
312 /* Read a data byte with ack from the i2c-bus
313 Expects a claimed pdev. -1 on error */
314 #if 0
315 static int w9966_i2c_rbyte(struct w9966 *cam)
317 unsigned char data = 0x00;
318 int i;
320 w9966_i2c_setsda(cam, 1);
322 for (i = 0; i < 8; i++) {
323 if (w9966_i2c_setscl(cam, 1) == -1)
324 return -1;
325 data = data << 1;
326 if (w9966_i2c_getsda(cam))
327 data |= 0x01;
329 w9966_i2c_setscl(cam, 0);
331 return data;
333 #endif
335 /* Read a register from the i2c device.
336 Expects claimed pdev. -1 on error */
337 #if 0
338 static int w9966_read_reg_i2c(struct w9966 *cam, int reg)
340 int data;
342 w9966_i2c_setsda(cam, 0);
343 w9966_i2c_setscl(cam, 0);
345 if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 ||
346 w9966_i2c_wbyte(cam, reg) == -1)
347 return -1;
349 w9966_i2c_setsda(cam, 1);
350 if (w9966_i2c_setscl(cam, 1) == -1)
351 return -1;
352 w9966_i2c_setsda(cam, 0);
353 w9966_i2c_setscl(cam, 0);
355 if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1)
356 return -1;
357 data = w9966_i2c_rbyte(cam);
358 if (data == -1)
359 return -1;
361 w9966_i2c_setsda(cam, 0);
363 if (w9966_i2c_setscl(cam, 1) == -1)
364 return -1;
365 w9966_i2c_setsda(cam, 1);
367 return data;
369 #endif
371 /* Write a register to the i2c device.
372 Expects claimed pdev. -1 on error */
373 static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data)
375 w9966_i2c_setsda(cam, 0);
376 w9966_i2c_setscl(cam, 0);
378 if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 ||
379 w9966_i2c_wbyte(cam, reg) == -1 ||
380 w9966_i2c_wbyte(cam, data) == -1)
381 return -1;
383 w9966_i2c_setsda(cam, 0);
384 if (w9966_i2c_setscl(cam, 1) == -1)
385 return -1;
387 w9966_i2c_setsda(cam, 1);
389 return 0;
392 /* Find a good length for capture window (used both for W and H)
393 A bit ugly but pretty functional. The capture length
394 have to match the downscale */
395 static int w9966_findlen(int near, int size, int maxlen)
397 int bestlen = size;
398 int besterr = abs(near - bestlen);
399 int len;
401 for (len = size + 1; len < maxlen; len++) {
402 int err;
403 if (((64 * size) % len) != 0)
404 continue;
406 err = abs(near - len);
408 /* Only continue as long as we keep getting better values */
409 if (err > besterr)
410 break;
412 besterr = err;
413 bestlen = len;
416 return bestlen;
419 /* Modify capture window (if necessary)
420 and calculate downscaling
421 Return -1 on error */
422 static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor)
424 int maxlen = max - min;
425 int len = *end - *beg + 1;
426 int newlen = w9966_findlen(len, size, maxlen);
427 int err = newlen - len;
429 /* Check for bad format */
430 if (newlen > maxlen || newlen < size)
431 return -1;
433 /* Set factor (6 bit fixed) */
434 *factor = (64 * size) / newlen;
435 if (*factor == 64)
436 *factor = 0x00; /* downscale is disabled */
437 else
438 *factor |= 0x80; /* set downscale-enable bit */
440 /* Modify old beginning and end */
441 *beg -= err / 2;
442 *end += err - (err / 2);
444 /* Move window if outside borders */
445 if (*beg < min) {
446 *end += min - *beg;
447 *beg += min - *beg;
449 if (*end > max) {
450 *beg -= *end - max;
451 *end -= *end - max;
454 return 0;
457 /* Setup the cameras capture window etc.
458 Expects a claimed pdev
459 return -1 on error */
460 static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h)
462 unsigned int i;
463 unsigned int enh_s, enh_e;
464 unsigned char scale_x, scale_y;
465 unsigned char regs[0x1c];
466 unsigned char saa7111_regs[] = {
467 0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00,
468 0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00,
469 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
470 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0
474 if (w * h * 2 > W9966_SRAMSIZE) {
475 DPRINTF("capture window exceeds SRAM size!.\n");
476 w = 200; h = 160; /* Pick default values */
479 w &= ~0x1;
480 if (w < 2)
481 w = 2;
482 if (h < 1)
483 h = 1;
484 if (w > W9966_WND_MAX_W)
485 w = W9966_WND_MAX_W;
486 if (h > W9966_WND_MAX_H)
487 h = W9966_WND_MAX_H;
489 cam->width = w;
490 cam->height = h;
492 enh_s = 0;
493 enh_e = w * h * 2;
495 /* Modify capture window if necessary and calculate downscaling */
496 if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 ||
497 w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0)
498 return -1;
500 DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n",
501 w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80);
503 /* Setup registers */
504 regs[0x00] = 0x00; /* Set normal operation */
505 regs[0x01] = 0x18; /* Capture mode */
506 regs[0x02] = scale_y; /* V-scaling */
507 regs[0x03] = scale_x; /* H-scaling */
509 /* Capture window */
510 regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */
511 regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */
512 regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */
513 regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */
514 regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */
515 regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */
516 regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */
518 regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */
520 /* Enhancement layer */
521 regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */
522 regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */
523 regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */
524 regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */
525 regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */
526 regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */
528 /* Misc */
529 regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */
530 regs[0x17] = 0x00; /* ??? */
531 regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */
532 regs[0x19] = 0xff; /* I/O port direction control */
533 regs[0x1a] = 0xff; /* I/O port data register */
534 regs[0x1b] = 0x10; /* ??? */
536 /* SAA7111 chip settings */
537 saa7111_regs[0x0a] = cam->brightness;
538 saa7111_regs[0x0b] = cam->contrast;
539 saa7111_regs[0x0c] = cam->color;
540 saa7111_regs[0x0d] = cam->hue;
542 /* Reset (ECP-fifo & serial-bus) */
543 if (w9966_write_reg(cam, 0x00, 0x03) == -1)
544 return -1;
546 /* Write regs to w9966cf chip */
547 for (i = 0; i < 0x1c; i++)
548 if (w9966_write_reg(cam, i, regs[i]) == -1)
549 return -1;
551 /* Write regs to saa7111 chip */
552 for (i = 0; i < 0x20; i++)
553 if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1)
554 return -1;
556 return 0;
560 * Video4linux interfacing
563 static int cam_querycap(struct file *file, void *priv,
564 struct v4l2_capability *vcap)
566 struct w9966 *cam = video_drvdata(file);
568 strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver));
569 strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card));
570 strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
571 vcap->version = KERNEL_VERSION(0, 33, 0);
572 vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
573 return 0;
576 static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
578 if (vin->index > 0)
579 return -EINVAL;
580 strlcpy(vin->name, "Camera", sizeof(vin->name));
581 vin->type = V4L2_INPUT_TYPE_CAMERA;
582 vin->audioset = 0;
583 vin->tuner = 0;
584 vin->std = 0;
585 vin->status = 0;
586 return 0;
589 static int cam_g_input(struct file *file, void *fh, unsigned int *inp)
591 *inp = 0;
592 return 0;
595 static int cam_s_input(struct file *file, void *fh, unsigned int inp)
597 return (inp > 0) ? -EINVAL : 0;
600 static int cam_queryctrl(struct file *file, void *priv,
601 struct v4l2_queryctrl *qc)
603 switch (qc->id) {
604 case V4L2_CID_BRIGHTNESS:
605 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
606 case V4L2_CID_CONTRAST:
607 return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64);
608 case V4L2_CID_SATURATION:
609 return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64);
610 case V4L2_CID_HUE:
611 return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
613 return -EINVAL;
616 static int cam_g_ctrl(struct file *file, void *priv,
617 struct v4l2_control *ctrl)
619 struct w9966 *cam = video_drvdata(file);
620 int ret = 0;
622 switch (ctrl->id) {
623 case V4L2_CID_BRIGHTNESS:
624 ctrl->value = cam->brightness;
625 break;
626 case V4L2_CID_CONTRAST:
627 ctrl->value = cam->contrast;
628 break;
629 case V4L2_CID_SATURATION:
630 ctrl->value = cam->color;
631 break;
632 case V4L2_CID_HUE:
633 ctrl->value = cam->hue;
634 break;
635 default:
636 ret = -EINVAL;
637 break;
639 return ret;
642 static int cam_s_ctrl(struct file *file, void *priv,
643 struct v4l2_control *ctrl)
645 struct w9966 *cam = video_drvdata(file);
646 int ret = 0;
648 mutex_lock(&cam->lock);
649 switch (ctrl->id) {
650 case V4L2_CID_BRIGHTNESS:
651 cam->brightness = ctrl->value;
652 break;
653 case V4L2_CID_CONTRAST:
654 cam->contrast = ctrl->value;
655 break;
656 case V4L2_CID_SATURATION:
657 cam->color = ctrl->value;
658 break;
659 case V4L2_CID_HUE:
660 cam->hue = ctrl->value;
661 break;
662 default:
663 ret = -EINVAL;
664 break;
667 if (ret == 0) {
668 w9966_pdev_claim(cam);
670 if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 ||
671 w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 ||
672 w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 ||
673 w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) {
674 ret = -EIO;
677 w9966_pdev_release(cam);
679 mutex_unlock(&cam->lock);
680 return ret;
683 static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
685 struct w9966 *cam = video_drvdata(file);
686 struct v4l2_pix_format *pix = &fmt->fmt.pix;
688 pix->width = cam->width;
689 pix->height = cam->height;
690 pix->pixelformat = V4L2_PIX_FMT_YUYV;
691 pix->field = V4L2_FIELD_NONE;
692 pix->bytesperline = 2 * cam->width;
693 pix->sizeimage = 2 * cam->width * cam->height;
694 /* Just a guess */
695 pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
696 return 0;
699 static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
701 struct v4l2_pix_format *pix = &fmt->fmt.pix;
703 if (pix->width < 2)
704 pix->width = 2;
705 if (pix->height < 1)
706 pix->height = 1;
707 if (pix->width > W9966_WND_MAX_W)
708 pix->width = W9966_WND_MAX_W;
709 if (pix->height > W9966_WND_MAX_H)
710 pix->height = W9966_WND_MAX_H;
711 pix->pixelformat = V4L2_PIX_FMT_YUYV;
712 pix->field = V4L2_FIELD_NONE;
713 pix->bytesperline = 2 * pix->width;
714 pix->sizeimage = 2 * pix->width * pix->height;
715 /* Just a guess */
716 pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
717 return 0;
720 static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
722 struct w9966 *cam = video_drvdata(file);
723 struct v4l2_pix_format *pix = &fmt->fmt.pix;
724 int ret = cam_try_fmt_vid_cap(file, fh, fmt);
726 if (ret)
727 return ret;
729 mutex_lock(&cam->lock);
730 /* Update camera regs */
731 w9966_pdev_claim(cam);
732 ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height);
733 w9966_pdev_release(cam);
734 mutex_unlock(&cam->lock);
735 return ret;
738 static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
740 static struct v4l2_fmtdesc formats[] = {
741 { 0, 0, 0,
742 "YUV 4:2:2", V4L2_PIX_FMT_YUYV,
743 { 0, 0, 0, 0 }
746 enum v4l2_buf_type type = fmt->type;
748 if (fmt->index > 0)
749 return -EINVAL;
751 *fmt = formats[fmt->index];
752 fmt->type = type;
753 return 0;
756 /* Capture data */
757 static ssize_t w9966_v4l_read(struct file *file, char __user *buf,
758 size_t count, loff_t *ppos)
760 struct w9966 *cam = video_drvdata(file);
761 unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */
762 unsigned char __user *dest = (unsigned char __user *)buf;
763 unsigned long dleft = count;
764 unsigned char *tbuf;
766 /* Why would anyone want more than this?? */
767 if (count > cam->width * cam->height * 2)
768 return -EINVAL;
770 mutex_lock(&cam->lock);
771 w9966_pdev_claim(cam);
772 w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */
773 w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */
774 w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */
776 /* write special capture-addr and negotiate into data transfer */
777 if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) ||
778 (parport_write(cam->pport, &addr, 1) != 1) ||
779 (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) {
780 w9966_pdev_release(cam);
781 mutex_unlock(&cam->lock);
782 return -EFAULT;
785 tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL);
786 if (tbuf == NULL) {
787 count = -ENOMEM;
788 goto out;
791 while (dleft > 0) {
792 unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft;
794 if (parport_read(cam->pport, tbuf, tsize) < tsize) {
795 count = -EFAULT;
796 goto out;
798 if (copy_to_user(dest, tbuf, tsize) != 0) {
799 count = -EFAULT;
800 goto out;
802 dest += tsize;
803 dleft -= tsize;
806 w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */
808 out:
809 kfree(tbuf);
810 w9966_pdev_release(cam);
811 mutex_unlock(&cam->lock);
813 return count;
816 static const struct v4l2_file_operations w9966_fops = {
817 .owner = THIS_MODULE,
818 .unlocked_ioctl = video_ioctl2,
819 .read = w9966_v4l_read,
822 static const struct v4l2_ioctl_ops w9966_ioctl_ops = {
823 .vidioc_querycap = cam_querycap,
824 .vidioc_g_input = cam_g_input,
825 .vidioc_s_input = cam_s_input,
826 .vidioc_enum_input = cam_enum_input,
827 .vidioc_queryctrl = cam_queryctrl,
828 .vidioc_g_ctrl = cam_g_ctrl,
829 .vidioc_s_ctrl = cam_s_ctrl,
830 .vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap,
831 .vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap,
832 .vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap,
833 .vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap,
837 /* Initialize camera device. Setup all internal flags, set a
838 default video mode, setup ccd-chip, register v4l device etc..
839 Also used for 'probing' of hardware.
840 -1 on error */
841 static int w9966_init(struct w9966 *cam, struct parport *port)
843 struct v4l2_device *v4l2_dev = &cam->v4l2_dev;
845 if (cam->dev_state != 0)
846 return -1;
848 strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name));
850 if (v4l2_device_register(NULL, v4l2_dev) < 0) {
851 v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
852 return -1;
854 cam->pport = port;
855 cam->brightness = 128;
856 cam->contrast = 64;
857 cam->color = 64;
858 cam->hue = 0;
860 /* Select requested transfer mode */
861 switch (parmode) {
862 default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */
863 case 0:
864 if (port->modes & PARPORT_MODE_ECP)
865 cam->ppmode = IEEE1284_MODE_ECP;
866 else if (port->modes & PARPORT_MODE_EPP)
867 cam->ppmode = IEEE1284_MODE_EPP;
868 else
869 cam->ppmode = IEEE1284_MODE_ECP;
870 break;
871 case 1: /* hw- or sw-ecp */
872 cam->ppmode = IEEE1284_MODE_ECP;
873 break;
874 case 2: /* hw- or sw-epp */
875 cam->ppmode = IEEE1284_MODE_EPP;
876 break;
879 /* Tell the parport driver that we exists */
880 cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL);
881 if (cam->pdev == NULL) {
882 DPRINTF("parport_register_device() failed\n");
883 return -1;
885 w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV);
887 w9966_pdev_claim(cam);
889 /* Setup a default capture mode */
890 if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) {
891 DPRINTF("w9966_setup() failed.\n");
892 return -1;
895 w9966_pdev_release(cam);
897 /* Fill in the video_device struct and register us to v4l */
898 strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name));
899 cam->vdev.v4l2_dev = v4l2_dev;
900 cam->vdev.fops = &w9966_fops;
901 cam->vdev.ioctl_ops = &w9966_ioctl_ops;
902 cam->vdev.release = video_device_release_empty;
903 video_set_drvdata(&cam->vdev, cam);
905 mutex_init(&cam->lock);
907 if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
908 return -1;
910 w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
912 /* All ok */
913 v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n",
914 cam->pport->name);
915 return 0;
919 /* Terminate everything gracefully */
920 static void w9966_term(struct w9966 *cam)
922 /* Unregister from v4l */
923 if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) {
924 video_unregister_device(&cam->vdev);
925 w9966_set_state(cam, W9966_STATE_VDEV, 0);
928 /* Terminate from IEEE1284 mode and release pdev block */
929 if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) {
930 w9966_pdev_claim(cam);
931 parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT);
932 w9966_pdev_release(cam);
935 /* Unregister from parport */
936 if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) {
937 parport_unregister_device(cam->pdev);
938 w9966_set_state(cam, W9966_STATE_PDEV, 0);
940 memset(cam, 0, sizeof(*cam));
944 /* Called once for every parport on init */
945 static void w9966_attach(struct parport *port)
947 int i;
949 for (i = 0; i < W9966_MAXCAMS; i++) {
950 if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */
951 continue;
952 if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) {
953 if (w9966_init(&w9966_cams[i], port) != 0)
954 w9966_term(&w9966_cams[i]);
955 break; /* return */
960 /* Called once for every parport on termination */
961 static void w9966_detach(struct parport *port)
963 int i;
965 for (i = 0; i < W9966_MAXCAMS; i++)
966 if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port)
967 w9966_term(&w9966_cams[i]);
971 static struct parport_driver w9966_ppd = {
972 .name = W9966_DRIVERNAME,
973 .attach = w9966_attach,
974 .detach = w9966_detach,
977 /* Module entry point */
978 static int __init w9966_mod_init(void)
980 int i;
982 for (i = 0; i < W9966_MAXCAMS; i++)
983 w9966_cams[i].dev_state = 0;
985 return parport_register_driver(&w9966_ppd);
988 /* Module cleanup */
989 static void __exit w9966_mod_term(void)
991 parport_unregister_driver(&w9966_ppd);
994 module_init(w9966_mod_init);
995 module_exit(w9966_mod_term);