?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
pty: Repair TIOCGPTPEER
[cris-mirror.git] / drivers / usb / serial / cp210x.c
blob2d945c9f975c04d5cd7909e00a37017a97e8062e
1 /*
2 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
3 *
4 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License version
8 * 2 as published by the Free Software Foundation.
9 *
10 * Support to set flow control line levels using TIOCMGET and TIOCMSET
11 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
12 * control thanks to Munir Nassar nassarmu@real-time.com
13 *
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/tty.h>
20 #include <linux/tty_flip.h>
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/usb.h>
24 #include <linux/uaccess.h>
25 #include <linux/usb/serial.h>
26 #include <linux/gpio/driver.h>
27 #include <linux/bitops.h>
28 #include <linux/mutex.h>
29
30 #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
31
32 /*
33 * Function Prototypes
34 */
35 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
36 static void cp210x_close(struct usb_serial_port *);
37 static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
38 static void cp210x_get_termios_port(struct usb_serial_port *port,
39 tcflag_t *cflagp, unsigned int *baudp);
40 static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
41 struct ktermios *);
42 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
43 struct ktermios*);
44 static bool cp210x_tx_empty(struct usb_serial_port *port);
45 static int cp210x_tiocmget(struct tty_struct *);
46 static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
47 static int cp210x_tiocmset_port(struct usb_serial_port *port,
48 unsigned int, unsigned int);
49 static void cp210x_break_ctl(struct tty_struct *, int);
50 static int cp210x_attach(struct usb_serial *);
51 static void cp210x_disconnect(struct usb_serial *);
52 static void cp210x_release(struct usb_serial *);
53 static int cp210x_port_probe(struct usb_serial_port *);
54 static int cp210x_port_remove(struct usb_serial_port *);
55 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
56
57 static const struct usb_device_id id_table[] = {
58 { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
59 { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
60 { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
61 { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
62 { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
63 { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
64 { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
65 { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
66 { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
67 { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
68 { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
69 { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
70 { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
71 { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
72 { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
73 { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
74 { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
75 { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
76 { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
77 { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
78 { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
79 { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
80 { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
81 { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
82 { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
83 { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
84 { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
85 { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
86 { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
87 { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
88 { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
89 { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
90 { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
91 { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
92 { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
93 { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
94 { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
95 { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
96 { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
97 { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
98 { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
99 { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
100 { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
101 { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
102 { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
103 { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
104 { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
105 { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
106 { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
107 { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
108 { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
109 { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
110 { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
111 { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
112 { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
113 { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
114 { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
115 { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
116 { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
117 { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
118 { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
119 { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
120 { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
121 { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
122 { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
123 { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
124 { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
125 { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
126 { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
127 { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
128 { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
129 { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
130 { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
131 { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
132 { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
133 { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
134 { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
135 { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
136 { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
137 { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
138 { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
139 { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
140 { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
141 { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
142 { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
143 { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
144 { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
145 { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
146 { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
147 { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
148 { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
149 { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
150 { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
151 { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
152 { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
153 { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
154 { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
155 { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
156 { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
157 { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
158 { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
159 { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
160 { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
161 { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
162 { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
163 { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
164 { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
165 { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
166 { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
167 { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
168 { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
169 { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
170 { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
171 { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
172 { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
173 { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
174 { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
175 { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
176 { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
177 { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
178 { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
179 { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
180 { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
181 { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
182 { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */
183 { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */
184 { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */
185 { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
186 { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
187 { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
188 { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
189 { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
190 { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
191 { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
192 { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
193 { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
194 { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
195 { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
196 { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
197 { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
198 { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
199 { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
200 { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
201 { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
202 { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
203 { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
204 { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
205 { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
206 { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
207 { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
208 { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
209 { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
210 { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
211 { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
212 { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
213 { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
214 { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
215 { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
216 { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
217 { } /* Terminating Entry */
218 };
219
220 MODULE_DEVICE_TABLE(usb, id_table);
221
222 struct cp210x_serial_private {
223 #ifdef CONFIG_GPIOLIB
224 struct gpio_chip gc;
225 u8 config;
226 u8 gpio_mode;
227 bool gpio_registered;
228 #endif
229 u8 partnum;
230 };
231
232 struct cp210x_port_private {
233 __u8 bInterfaceNumber;
234 bool has_swapped_line_ctl;
235 };
236
237 static struct usb_serial_driver cp210x_device = {
238 .driver = {
239 .owner = THIS_MODULE,
240 .name = "cp210x",
241 },
242 .id_table = id_table,
243 .num_ports = 1,
244 .bulk_in_size = 256,
245 .bulk_out_size = 256,
246 .open = cp210x_open,
247 .close = cp210x_close,
248 .break_ctl = cp210x_break_ctl,
249 .set_termios = cp210x_set_termios,
250 .tx_empty = cp210x_tx_empty,
251 .tiocmget = cp210x_tiocmget,
252 .tiocmset = cp210x_tiocmset,
253 .attach = cp210x_attach,
254 .disconnect = cp210x_disconnect,
255 .release = cp210x_release,
256 .port_probe = cp210x_port_probe,
257 .port_remove = cp210x_port_remove,
258 .dtr_rts = cp210x_dtr_rts
259 };
260
261 static struct usb_serial_driver * const serial_drivers[] = {
262 &cp210x_device, NULL
263 };
264
265 /* Config request types */
266 #define REQTYPE_HOST_TO_INTERFACE 0x41
267 #define REQTYPE_INTERFACE_TO_HOST 0xc1
268 #define REQTYPE_HOST_TO_DEVICE 0x40
269 #define REQTYPE_DEVICE_TO_HOST 0xc0
270
271 /* Config request codes */
272 #define CP210X_IFC_ENABLE 0x00
273 #define CP210X_SET_BAUDDIV 0x01
274 #define CP210X_GET_BAUDDIV 0x02
275 #define CP210X_SET_LINE_CTL 0x03
276 #define CP210X_GET_LINE_CTL 0x04
277 #define CP210X_SET_BREAK 0x05
278 #define CP210X_IMM_CHAR 0x06
279 #define CP210X_SET_MHS 0x07
280 #define CP210X_GET_MDMSTS 0x08
281 #define CP210X_SET_XON 0x09
282 #define CP210X_SET_XOFF 0x0A
283 #define CP210X_SET_EVENTMASK 0x0B
284 #define CP210X_GET_EVENTMASK 0x0C
285 #define CP210X_SET_CHAR 0x0D
286 #define CP210X_GET_CHARS 0x0E
287 #define CP210X_GET_PROPS 0x0F
288 #define CP210X_GET_COMM_STATUS 0x10
289 #define CP210X_RESET 0x11
290 #define CP210X_PURGE 0x12
291 #define CP210X_SET_FLOW 0x13
292 #define CP210X_GET_FLOW 0x14
293 #define CP210X_EMBED_EVENTS 0x15
294 #define CP210X_GET_EVENTSTATE 0x16
295 #define CP210X_SET_CHARS 0x19
296 #define CP210X_GET_BAUDRATE 0x1D
297 #define CP210X_SET_BAUDRATE 0x1E
298 #define CP210X_VENDOR_SPECIFIC 0xFF
299
300 /* CP210X_IFC_ENABLE */
301 #define UART_ENABLE 0x0001
302 #define UART_DISABLE 0x0000
303
304 /* CP210X_(SET|GET)_BAUDDIV */
305 #define BAUD_RATE_GEN_FREQ 0x384000
306
307 /* CP210X_(SET|GET)_LINE_CTL */
308 #define BITS_DATA_MASK 0X0f00
309 #define BITS_DATA_5 0X0500
310 #define BITS_DATA_6 0X0600
311 #define BITS_DATA_7 0X0700
312 #define BITS_DATA_8 0X0800
313 #define BITS_DATA_9 0X0900
314
315 #define BITS_PARITY_MASK 0x00f0
316 #define BITS_PARITY_NONE 0x0000
317 #define BITS_PARITY_ODD 0x0010
318 #define BITS_PARITY_EVEN 0x0020
319 #define BITS_PARITY_MARK 0x0030
320 #define BITS_PARITY_SPACE 0x0040
321
322 #define BITS_STOP_MASK 0x000f
323 #define BITS_STOP_1 0x0000
324 #define BITS_STOP_1_5 0x0001
325 #define BITS_STOP_2 0x0002
326
327 /* CP210X_SET_BREAK */
328 #define BREAK_ON 0x0001
329 #define BREAK_OFF 0x0000
330
331 /* CP210X_(SET_MHS|GET_MDMSTS) */
332 #define CONTROL_DTR 0x0001
333 #define CONTROL_RTS 0x0002
334 #define CONTROL_CTS 0x0010
335 #define CONTROL_DSR 0x0020
336 #define CONTROL_RING 0x0040
337 #define CONTROL_DCD 0x0080
338 #define CONTROL_WRITE_DTR 0x0100
339 #define CONTROL_WRITE_RTS 0x0200
340
341 /* CP210X_VENDOR_SPECIFIC values */
342 #define CP210X_READ_LATCH 0x00C2
343 #define CP210X_GET_PARTNUM 0x370B
344 #define CP210X_GET_PORTCONFIG 0x370C
345 #define CP210X_GET_DEVICEMODE 0x3711
346 #define CP210X_WRITE_LATCH 0x37E1
347
348 /* Part number definitions */
349 #define CP210X_PARTNUM_CP2101 0x01
350 #define CP210X_PARTNUM_CP2102 0x02
351 #define CP210X_PARTNUM_CP2103 0x03
352 #define CP210X_PARTNUM_CP2104 0x04
353 #define CP210X_PARTNUM_CP2105 0x05
354 #define CP210X_PARTNUM_CP2108 0x08
355
356 /* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
357 struct cp210x_comm_status {
358 __le32 ulErrors;
359 __le32 ulHoldReasons;
360 __le32 ulAmountInInQueue;
361 __le32 ulAmountInOutQueue;
362 u8 bEofReceived;
363 u8 bWaitForImmediate;
364 u8 bReserved;
365 } __packed;
366
367 /*
368 * CP210X_PURGE - 16 bits passed in wValue of USB request.
369 * SiLabs app note AN571 gives a strange description of the 4 bits:
370 * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
371 * writing 1 to all, however, purges cp2108 well enough to avoid the hang.
372 */
373 #define PURGE_ALL 0x000f
374
375 /* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
376 struct cp210x_flow_ctl {
377 __le32 ulControlHandshake;
378 __le32 ulFlowReplace;
379 __le32 ulXonLimit;
380 __le32 ulXoffLimit;
381 } __packed;
382
383 /* cp210x_flow_ctl::ulControlHandshake */
384 #define CP210X_SERIAL_DTR_MASK GENMASK(1, 0)
385 #define CP210X_SERIAL_DTR_SHIFT(_mode) (_mode)
386 #define CP210X_SERIAL_CTS_HANDSHAKE BIT(3)
387 #define CP210X_SERIAL_DSR_HANDSHAKE BIT(4)
388 #define CP210X_SERIAL_DCD_HANDSHAKE BIT(5)
389 #define CP210X_SERIAL_DSR_SENSITIVITY BIT(6)
390
391 /* values for cp210x_flow_ctl::ulControlHandshake::CP210X_SERIAL_DTR_MASK */
392 #define CP210X_SERIAL_DTR_INACTIVE 0
393 #define CP210X_SERIAL_DTR_ACTIVE 1
394 #define CP210X_SERIAL_DTR_FLOW_CTL 2
395
396 /* cp210x_flow_ctl::ulFlowReplace */
397 #define CP210X_SERIAL_AUTO_TRANSMIT BIT(0)
398 #define CP210X_SERIAL_AUTO_RECEIVE BIT(1)
399 #define CP210X_SERIAL_ERROR_CHAR BIT(2)
400 #define CP210X_SERIAL_NULL_STRIPPING BIT(3)
401 #define CP210X_SERIAL_BREAK_CHAR BIT(4)
402 #define CP210X_SERIAL_RTS_MASK GENMASK(7, 6)
403 #define CP210X_SERIAL_RTS_SHIFT(_mode) (_mode << 6)
404 #define CP210X_SERIAL_XOFF_CONTINUE BIT(31)
405
406 /* values for cp210x_flow_ctl::ulFlowReplace::CP210X_SERIAL_RTS_MASK */
407 #define CP210X_SERIAL_RTS_INACTIVE 0
408 #define CP210X_SERIAL_RTS_ACTIVE 1
409 #define CP210X_SERIAL_RTS_FLOW_CTL 2
410
411 /* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */
412 struct cp210x_pin_mode {
413 u8 eci;
414 u8 sci;
415 } __packed;
416
417 #define CP210X_PIN_MODE_MODEM 0
418 #define CP210X_PIN_MODE_GPIO BIT(0)
419
420 /*
421 * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes.
422 * Structure needs padding due to unused/unspecified bytes.
423 */
424 struct cp210x_config {
425 __le16 gpio_mode;
426 u8 __pad0[2];
427 __le16 reset_state;
428 u8 __pad1[4];
429 __le16 suspend_state;
430 u8 sci_cfg;
431 u8 eci_cfg;
432 u8 device_cfg;
433 } __packed;
434
435 /* GPIO modes */
436 #define CP210X_SCI_GPIO_MODE_OFFSET 9
437 #define CP210X_SCI_GPIO_MODE_MASK GENMASK(11, 9)
438
439 #define CP210X_ECI_GPIO_MODE_OFFSET 2
440 #define CP210X_ECI_GPIO_MODE_MASK GENMASK(3, 2)
441
442 /* CP2105 port configuration values */
443 #define CP2105_GPIO0_TXLED_MODE BIT(0)
444 #define CP2105_GPIO1_RXLED_MODE BIT(1)
445 #define CP2105_GPIO1_RS485_MODE BIT(2)
446
447 /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
448 struct cp210x_gpio_write {
449 u8 mask;
450 u8 state;
451 } __packed;
452
453 /*
454 * Helper to get interface number when we only have struct usb_serial.
455 */
456 static u8 cp210x_interface_num(struct usb_serial *serial)
457 {
458 struct usb_host_interface *cur_altsetting;
459
460 cur_altsetting = serial->interface->cur_altsetting;
461
462 return cur_altsetting->desc.bInterfaceNumber;
463 }
464
465 /*
466 * Reads a variable-sized block of CP210X_ registers, identified by req.
467 * Returns data into buf in native USB byte order.
468 */
469 static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
470 void *buf, int bufsize)
471 {
472 struct usb_serial *serial = port->serial;
473 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
474 void *dmabuf;
475 int result;
476
477 dmabuf = kmalloc(bufsize, GFP_KERNEL);
478 if (!dmabuf) {
479 /*
480 * FIXME Some callers don't bother to check for error,
481 * at least give them consistent junk until they are fixed
482 */
483 memset(buf, 0, bufsize);
484 return -ENOMEM;
485 }
486
487 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
488 req, REQTYPE_INTERFACE_TO_HOST, 0,
489 port_priv->bInterfaceNumber, dmabuf, bufsize,
490 USB_CTRL_SET_TIMEOUT);
491 if (result == bufsize) {
492 memcpy(buf, dmabuf, bufsize);
493 result = 0;
494 } else {
495 dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
496 req, bufsize, result);
497 if (result >= 0)
498 result = -EIO;
499
500 /*
501 * FIXME Some callers don't bother to check for error,
502 * at least give them consistent junk until they are fixed
503 */
504 memset(buf, 0, bufsize);
505 }
506
507 kfree(dmabuf);
508
509 return result;
510 }
511
512 /*
513 * Reads any 32-bit CP210X_ register identified by req.
514 */
515 static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
516 {
517 __le32 le32_val;
518 int err;
519
520 err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
521 if (err) {
522 /*
523 * FIXME Some callers don't bother to check for error,
524 * at least give them consistent junk until they are fixed
525 */
526 *val = 0;
527 return err;
528 }
529
530 *val = le32_to_cpu(le32_val);
531
532 return 0;
533 }
534
535 /*
536 * Reads any 16-bit CP210X_ register identified by req.
537 */
538 static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
539 {
540 __le16 le16_val;
541 int err;
542
543 err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
544 if (err)
545 return err;
546
547 *val = le16_to_cpu(le16_val);
548
549 return 0;
550 }
551
552 /*
553 * Reads any 8-bit CP210X_ register identified by req.
554 */
555 static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
556 {
557 return cp210x_read_reg_block(port, req, val, sizeof(*val));
558 }
559
560 /*
561 * Reads a variable-sized vendor block of CP210X_ registers, identified by val.
562 * Returns data into buf in native USB byte order.
563 */
564 static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
565 void *buf, int bufsize)
566 {
567 void *dmabuf;
568 int result;
569
570 dmabuf = kmalloc(bufsize, GFP_KERNEL);
571 if (!dmabuf)
572 return -ENOMEM;
573
574 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
575 CP210X_VENDOR_SPECIFIC, type, val,
576 cp210x_interface_num(serial), dmabuf, bufsize,
577 USB_CTRL_GET_TIMEOUT);
578 if (result == bufsize) {
579 memcpy(buf, dmabuf, bufsize);
580 result = 0;
581 } else {
582 dev_err(&serial->interface->dev,
583 "failed to get vendor val 0x%04x size %d: %d\n", val,
584 bufsize, result);
585 if (result >= 0)
586 result = -EIO;
587 }
588
589 kfree(dmabuf);
590
591 return result;
592 }
593
594 /*
595 * Writes any 16-bit CP210X_ register (req) whose value is passed
596 * entirely in the wValue field of the USB request.
597 */
598 static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
599 {
600 struct usb_serial *serial = port->serial;
601 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
602 int result;
603
604 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
605 req, REQTYPE_HOST_TO_INTERFACE, val,
606 port_priv->bInterfaceNumber, NULL, 0,
607 USB_CTRL_SET_TIMEOUT);
608 if (result < 0) {
609 dev_err(&port->dev, "failed set request 0x%x status: %d\n",
610 req, result);
611 }
612
613 return result;
614 }
615
616 /*
617 * Writes a variable-sized block of CP210X_ registers, identified by req.
618 * Data in buf must be in native USB byte order.
619 */
620 static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
621 void *buf, int bufsize)
622 {
623 struct usb_serial *serial = port->serial;
624 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
625 void *dmabuf;
626 int result;
627
628 dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
629 if (!dmabuf)
630 return -ENOMEM;
631
632 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
633 req, REQTYPE_HOST_TO_INTERFACE, 0,
634 port_priv->bInterfaceNumber, dmabuf, bufsize,
635 USB_CTRL_SET_TIMEOUT);
636
637 kfree(dmabuf);
638
639 if (result == bufsize) {
640 result = 0;
641 } else {
642 dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
643 req, bufsize, result);
644 if (result >= 0)
645 result = -EIO;
646 }
647
648 return result;
649 }
650
651 /*
652 * Writes any 32-bit CP210X_ register identified by req.
653 */
654 static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
655 {
656 __le32 le32_val;
657
658 le32_val = cpu_to_le32(val);
659
660 return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
661 }
662
663 #ifdef CONFIG_GPIOLIB
664 /*
665 * Writes a variable-sized vendor block of CP210X_ registers, identified by val.
666 * Data in buf must be in native USB byte order.
667 */
668 static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
669 u16 val, void *buf, int bufsize)
670 {
671 void *dmabuf;
672 int result;
673
674 dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
675 if (!dmabuf)
676 return -ENOMEM;
677
678 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
679 CP210X_VENDOR_SPECIFIC, type, val,
680 cp210x_interface_num(serial), dmabuf, bufsize,
681 USB_CTRL_SET_TIMEOUT);
682
683 kfree(dmabuf);
684
685 if (result == bufsize) {
686 result = 0;
687 } else {
688 dev_err(&serial->interface->dev,
689 "failed to set vendor val 0x%04x size %d: %d\n", val,
690 bufsize, result);
691 if (result >= 0)
692 result = -EIO;
693 }
694
695 return result;
696 }
697 #endif
698
699 /*
700 * Detect CP2108 GET_LINE_CTL bug and activate workaround.
701 * Write a known good value 0x800, read it back.
702 * If it comes back swapped the bug is detected.
703 * Preserve the original register value.
704 */
705 static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
706 {
707 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
708 u16 line_ctl_save;
709 u16 line_ctl_test;
710 int err;
711
712 err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
713 if (err)
714 return err;
715
716 err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
717 if (err)
718 return err;
719
720 err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
721 if (err)
722 return err;
723
724 if (line_ctl_test == 8) {
725 port_priv->has_swapped_line_ctl = true;
726 line_ctl_save = swab16(line_ctl_save);
727 }
728
729 return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
730 }
731
732 /*
733 * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
734 * to workaround cp2108 bug and get correct value.
735 */
736 static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
737 {
738 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
739 int err;
740
741 err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
742 if (err)
743 return err;
744
745 /* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
746 if (port_priv->has_swapped_line_ctl)
747 *ctl = swab16(*ctl);
748
749 return 0;
750 }
751
752 /*
753 * cp210x_quantise_baudrate
754 * Quantises the baud rate as per AN205 Table 1
755 */
756 static unsigned int cp210x_quantise_baudrate(unsigned int baud)
757 {
758 if (baud <= 300)
759 baud = 300;
760 else if (baud <= 600) baud = 600;
761 else if (baud <= 1200) baud = 1200;
762 else if (baud <= 1800) baud = 1800;
763 else if (baud <= 2400) baud = 2400;
764 else if (baud <= 4000) baud = 4000;
765 else if (baud <= 4803) baud = 4800;
766 else if (baud <= 7207) baud = 7200;
767 else if (baud <= 9612) baud = 9600;
768 else if (baud <= 14428) baud = 14400;
769 else if (baud <= 16062) baud = 16000;
770 else if (baud <= 19250) baud = 19200;
771 else if (baud <= 28912) baud = 28800;
772 else if (baud <= 38601) baud = 38400;
773 else if (baud <= 51558) baud = 51200;
774 else if (baud <= 56280) baud = 56000;
775 else if (baud <= 58053) baud = 57600;
776 else if (baud <= 64111) baud = 64000;
777 else if (baud <= 77608) baud = 76800;
778 else if (baud <= 117028) baud = 115200;
779 else if (baud <= 129347) baud = 128000;
780 else if (baud <= 156868) baud = 153600;
781 else if (baud <= 237832) baud = 230400;
782 else if (baud <= 254234) baud = 250000;
783 else if (baud <= 273066) baud = 256000;
784 else if (baud <= 491520) baud = 460800;
785 else if (baud <= 567138) baud = 500000;
786 else if (baud <= 670254) baud = 576000;
787 else if (baud < 1000000)
788 baud = 921600;
789 else if (baud > 2000000)
790 baud = 2000000;
791 return baud;
792 }
793
794 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
795 {
796 int result;
797
798 result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
799 if (result) {
800 dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
801 return result;
802 }
803
804 /* Configure the termios structure */
805 cp210x_get_termios(tty, port);
806
807 /* The baud rate must be initialised on cp2104 */
808 if (tty)
809 cp210x_change_speed(tty, port, NULL);
810
811 return usb_serial_generic_open(tty, port);
812 }
813
814 static void cp210x_close(struct usb_serial_port *port)
815 {
816 usb_serial_generic_close(port);
817
818 /* Clear both queues; cp2108 needs this to avoid an occasional hang */
819 cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
820
821 cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
822 }
823
824 /*
825 * Read how many bytes are waiting in the TX queue.
826 */
827 static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
828 u32 *count)
829 {
830 struct usb_serial *serial = port->serial;
831 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
832 struct cp210x_comm_status *sts;
833 int result;
834
835 sts = kmalloc(sizeof(*sts), GFP_KERNEL);
836 if (!sts)
837 return -ENOMEM;
838
839 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
840 CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST,
841 0, port_priv->bInterfaceNumber, sts, sizeof(*sts),
842 USB_CTRL_GET_TIMEOUT);
843 if (result == sizeof(*sts)) {
844 *count = le32_to_cpu(sts->ulAmountInOutQueue);
845 result = 0;
846 } else {
847 dev_err(&port->dev, "failed to get comm status: %d\n", result);
848 if (result >= 0)
849 result = -EIO;
850 }
851
852 kfree(sts);
853
854 return result;
855 }
856
857 static bool cp210x_tx_empty(struct usb_serial_port *port)
858 {
859 int err;
860 u32 count;
861
862 err = cp210x_get_tx_queue_byte_count(port, &count);
863 if (err)
864 return true;
865
866 return !count;
867 }
868
869 /*
870 * cp210x_get_termios
871 * Reads the baud rate, data bits, parity, stop bits and flow control mode
872 * from the device, corrects any unsupported values, and configures the
873 * termios structure to reflect the state of the device
874 */
875 static void cp210x_get_termios(struct tty_struct *tty,
876 struct usb_serial_port *port)
877 {
878 unsigned int baud;
879
880 if (tty) {
881 cp210x_get_termios_port(tty->driver_data,
882 &tty->termios.c_cflag, &baud);
883 tty_encode_baud_rate(tty, baud, baud);
884 } else {
885 tcflag_t cflag;
886 cflag = 0;
887 cp210x_get_termios_port(port, &cflag, &baud);
888 }
889 }
890
891 /*
892 * cp210x_get_termios_port
893 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
894 */
895 static void cp210x_get_termios_port(struct usb_serial_port *port,
896 tcflag_t *cflagp, unsigned int *baudp)
897 {
898 struct device *dev = &port->dev;
899 tcflag_t cflag;
900 struct cp210x_flow_ctl flow_ctl;
901 u32 baud;
902 u16 bits;
903 u32 ctl_hs;
904
905 cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
906
907 dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
908 *baudp = baud;
909
910 cflag = *cflagp;
911
912 cp210x_get_line_ctl(port, &bits);
913 cflag &= ~CSIZE;
914 switch (bits & BITS_DATA_MASK) {
915 case BITS_DATA_5:
916 dev_dbg(dev, "%s - data bits = 5\n", __func__);
917 cflag |= CS5;
918 break;
919 case BITS_DATA_6:
920 dev_dbg(dev, "%s - data bits = 6\n", __func__);
921 cflag |= CS6;
922 break;
923 case BITS_DATA_7:
924 dev_dbg(dev, "%s - data bits = 7\n", __func__);
925 cflag |= CS7;
926 break;
927 case BITS_DATA_8:
928 dev_dbg(dev, "%s - data bits = 8\n", __func__);
929 cflag |= CS8;
930 break;
931 case BITS_DATA_9:
932 dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);
933 cflag |= CS8;
934 bits &= ~BITS_DATA_MASK;
935 bits |= BITS_DATA_8;
936 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
937 break;
938 default:
939 dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
940 cflag |= CS8;
941 bits &= ~BITS_DATA_MASK;
942 bits |= BITS_DATA_8;
943 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
944 break;
945 }
946
947 switch (bits & BITS_PARITY_MASK) {
948 case BITS_PARITY_NONE:
949 dev_dbg(dev, "%s - parity = NONE\n", __func__);
950 cflag &= ~PARENB;
951 break;
952 case BITS_PARITY_ODD:
953 dev_dbg(dev, "%s - parity = ODD\n", __func__);
954 cflag |= (PARENB|PARODD);
955 break;
956 case BITS_PARITY_EVEN:
957 dev_dbg(dev, "%s - parity = EVEN\n", __func__);
958 cflag &= ~PARODD;
959 cflag |= PARENB;
960 break;
961 case BITS_PARITY_MARK:
962 dev_dbg(dev, "%s - parity = MARK\n", __func__);
963 cflag |= (PARENB|PARODD|CMSPAR);
964 break;
965 case BITS_PARITY_SPACE:
966 dev_dbg(dev, "%s - parity = SPACE\n", __func__);
967 cflag &= ~PARODD;
968 cflag |= (PARENB|CMSPAR);
969 break;
970 default:
971 dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
972 cflag &= ~PARENB;
973 bits &= ~BITS_PARITY_MASK;
974 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
975 break;
976 }
977
978 cflag &= ~CSTOPB;
979 switch (bits & BITS_STOP_MASK) {
980 case BITS_STOP_1:
981 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
982 break;
983 case BITS_STOP_1_5:
984 dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
985 bits &= ~BITS_STOP_MASK;
986 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
987 break;
988 case BITS_STOP_2:
989 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
990 cflag |= CSTOPB;
991 break;
992 default:
993 dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
994 bits &= ~BITS_STOP_MASK;
995 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
996 break;
997 }
998
999 cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
1000 sizeof(flow_ctl));
1001 ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
1002 if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
1003 dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
1004 cflag |= CRTSCTS;
1005 } else {
1006 dev_dbg(dev, "%s - flow control = NONE\n", __func__);
1007 cflag &= ~CRTSCTS;
1008 }
1009
1010 *cflagp = cflag;
1011 }
1012
1013 /*
1014 * CP2101 supports the following baud rates:
1015 *
1016 * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
1017 * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
1018 *
1019 * CP2102 and CP2103 support the following additional rates:
1020 *
1021 * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
1022 * 576000
1023 *
1024 * The device will map a requested rate to a supported one, but the result
1025 * of requests for rates greater than 1053257 is undefined (see AN205).
1026 *
1027 * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
1028 * respectively, with an error less than 1%. The actual rates are determined
1029 * by
1030 *
1031 * div = round(freq / (2 x prescale x request))
1032 * actual = freq / (2 x prescale x div)
1033 *
1034 * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
1035 * or 1 otherwise.
1036 * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
1037 * otherwise.
1038 */
1039 static void cp210x_change_speed(struct tty_struct *tty,
1040 struct usb_serial_port *port, struct ktermios *old_termios)
1041 {
1042 u32 baud;
1043
1044 baud = tty->termios.c_ospeed;
1045
1046 /* This maps the requested rate to a rate valid on cp2102 or cp2103,
1047 * or to an arbitrary rate in [1M,2M].
1048 *
1049 * NOTE: B0 is not implemented.
1050 */
1051 baud = cp210x_quantise_baudrate(baud);
1052
1053 dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
1054 if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
1055 dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
1056 if (old_termios)
1057 baud = old_termios->c_ospeed;
1058 else
1059 baud = 9600;
1060 }
1061
1062 tty_encode_baud_rate(tty, baud, baud);
1063 }
1064
1065 static void cp210x_set_termios(struct tty_struct *tty,
1066 struct usb_serial_port *port, struct ktermios *old_termios)
1067 {
1068 struct device *dev = &port->dev;
1069 unsigned int cflag, old_cflag;
1070 u16 bits;
1071
1072 cflag = tty->termios.c_cflag;
1073 old_cflag = old_termios->c_cflag;
1074
1075 if (tty->termios.c_ospeed != old_termios->c_ospeed)
1076 cp210x_change_speed(tty, port, old_termios);
1077
1078 /* If the number of data bits is to be updated */
1079 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
1080 cp210x_get_line_ctl(port, &bits);
1081 bits &= ~BITS_DATA_MASK;
1082 switch (cflag & CSIZE) {
1083 case CS5:
1084 bits |= BITS_DATA_5;
1085 dev_dbg(dev, "%s - data bits = 5\n", __func__);
1086 break;
1087 case CS6:
1088 bits |= BITS_DATA_6;
1089 dev_dbg(dev, "%s - data bits = 6\n", __func__);
1090 break;
1091 case CS7:
1092 bits |= BITS_DATA_7;
1093 dev_dbg(dev, "%s - data bits = 7\n", __func__);
1094 break;
1095 case CS8:
1096 default:
1097 bits |= BITS_DATA_8;
1098 dev_dbg(dev, "%s - data bits = 8\n", __func__);
1099 break;
1100 }
1101 if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1102 dev_dbg(dev, "Number of data bits requested not supported by device\n");
1103 }
1104
1105 if ((cflag & (PARENB|PARODD|CMSPAR)) !=
1106 (old_cflag & (PARENB|PARODD|CMSPAR))) {
1107 cp210x_get_line_ctl(port, &bits);
1108 bits &= ~BITS_PARITY_MASK;
1109 if (cflag & PARENB) {
1110 if (cflag & CMSPAR) {
1111 if (cflag & PARODD) {
1112 bits |= BITS_PARITY_MARK;
1113 dev_dbg(dev, "%s - parity = MARK\n", __func__);
1114 } else {
1115 bits |= BITS_PARITY_SPACE;
1116 dev_dbg(dev, "%s - parity = SPACE\n", __func__);
1117 }
1118 } else {
1119 if (cflag & PARODD) {
1120 bits |= BITS_PARITY_ODD;
1121 dev_dbg(dev, "%s - parity = ODD\n", __func__);
1122 } else {
1123 bits |= BITS_PARITY_EVEN;
1124 dev_dbg(dev, "%s - parity = EVEN\n", __func__);
1125 }
1126 }
1127 }
1128 if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1129 dev_dbg(dev, "Parity mode not supported by device\n");
1130 }
1131
1132 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
1133 cp210x_get_line_ctl(port, &bits);
1134 bits &= ~BITS_STOP_MASK;
1135 if (cflag & CSTOPB) {
1136 bits |= BITS_STOP_2;
1137 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
1138 } else {
1139 bits |= BITS_STOP_1;
1140 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
1141 }
1142 if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1143 dev_dbg(dev, "Number of stop bits requested not supported by device\n");
1144 }
1145
1146 if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
1147 struct cp210x_flow_ctl flow_ctl;
1148 u32 ctl_hs;
1149 u32 flow_repl;
1150
1151 cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
1152 sizeof(flow_ctl));
1153 ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
1154 flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
1155 dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
1156 __func__, ctl_hs, flow_repl);
1157
1158 ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
1159 ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
1160 ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
1161 ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
1162 ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
1163 if (cflag & CRTSCTS) {
1164 ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
1165
1166 flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1167 flow_repl |= CP210X_SERIAL_RTS_SHIFT(
1168 CP210X_SERIAL_RTS_FLOW_CTL);
1169 dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
1170 } else {
1171 ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
1172
1173 flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1174 flow_repl |= CP210X_SERIAL_RTS_SHIFT(
1175 CP210X_SERIAL_RTS_ACTIVE);
1176 dev_dbg(dev, "%s - flow control = NONE\n", __func__);
1177 }
1178
1179 dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
1180 __func__, ctl_hs, flow_repl);
1181 flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
1182 flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
1183 cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
1184 sizeof(flow_ctl));
1185 }
1186
1187 }
1188
1189 static int cp210x_tiocmset(struct tty_struct *tty,
1190 unsigned int set, unsigned int clear)
1191 {
1192 struct usb_serial_port *port = tty->driver_data;
1193 return cp210x_tiocmset_port(port, set, clear);
1194 }
1195
1196 static int cp210x_tiocmset_port(struct usb_serial_port *port,
1197 unsigned int set, unsigned int clear)
1198 {
1199 u16 control = 0;
1200
1201 if (set & TIOCM_RTS) {
1202 control |= CONTROL_RTS;
1203 control |= CONTROL_WRITE_RTS;
1204 }
1205 if (set & TIOCM_DTR) {
1206 control |= CONTROL_DTR;
1207 control |= CONTROL_WRITE_DTR;
1208 }
1209 if (clear & TIOCM_RTS) {
1210 control &= ~CONTROL_RTS;
1211 control |= CONTROL_WRITE_RTS;
1212 }
1213 if (clear & TIOCM_DTR) {
1214 control &= ~CONTROL_DTR;
1215 control |= CONTROL_WRITE_DTR;
1216 }
1217
1218 dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
1219
1220 return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
1221 }
1222
1223 static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
1224 {
1225 if (on)
1226 cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
1227 else
1228 cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
1229 }
1230
1231 static int cp210x_tiocmget(struct tty_struct *tty)
1232 {
1233 struct usb_serial_port *port = tty->driver_data;
1234 u8 control;
1235 int result;
1236
1237 result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
1238 if (result)
1239 return result;
1240
1241 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
1242 |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
1243 |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
1244 |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
1245 |((control & CONTROL_RING)? TIOCM_RI : 0)
1246 |((control & CONTROL_DCD) ? TIOCM_CD : 0);
1247
1248 dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);
1249
1250 return result;
1251 }
1252
1253 static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
1254 {
1255 struct usb_serial_port *port = tty->driver_data;
1256 u16 state;
1257
1258 if (break_state == 0)
1259 state = BREAK_OFF;
1260 else
1261 state = BREAK_ON;
1262 dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
1263 state == BREAK_OFF ? "off" : "on");
1264 cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
1265 }
1266
1267 #ifdef CONFIG_GPIOLIB
1268 static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset)
1269 {
1270 struct usb_serial *serial = gpiochip_get_data(gc);
1271 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1272
1273 switch (offset) {
1274 case 0:
1275 if (priv->config & CP2105_GPIO0_TXLED_MODE)
1276 return -ENODEV;
1277 break;
1278 case 1:
1279 if (priv->config & (CP2105_GPIO1_RXLED_MODE |
1280 CP2105_GPIO1_RS485_MODE))
1281 return -ENODEV;
1282 break;
1283 }
1284
1285 return 0;
1286 }
1287
1288 static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
1289 {
1290 struct usb_serial *serial = gpiochip_get_data(gc);
1291 int result;
1292 u8 buf;
1293
1294 result = cp210x_read_vendor_block(serial, REQTYPE_INTERFACE_TO_HOST,
1295 CP210X_READ_LATCH, &buf, sizeof(buf));
1296 if (result < 0)
1297 return result;
1298
1299 return !!(buf & BIT(gpio));
1300 }
1301
1302 static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
1303 {
1304 struct usb_serial *serial = gpiochip_get_data(gc);
1305 struct cp210x_gpio_write buf;
1306
1307 if (value == 1)
1308 buf.state = BIT(gpio);
1309 else
1310 buf.state = 0;
1311
1312 buf.mask = BIT(gpio);
1313
1314 cp210x_write_vendor_block(serial, REQTYPE_HOST_TO_INTERFACE,
1315 CP210X_WRITE_LATCH, &buf, sizeof(buf));
1316 }
1317
1318 static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
1319 {
1320 /* Hardware does not support an input mode */
1321 return 0;
1322 }
1323
1324 static int cp210x_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
1325 {
1326 /* Hardware does not support an input mode */
1327 return -ENOTSUPP;
1328 }
1329
1330 static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
1331 int value)
1332 {
1333 return 0;
1334 }
1335
1336 static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio,
1337 unsigned long config)
1338 {
1339 struct usb_serial *serial = gpiochip_get_data(gc);
1340 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1341 enum pin_config_param param = pinconf_to_config_param(config);
1342
1343 /* Succeed only if in correct mode (this can't be set at runtime) */
1344 if ((param == PIN_CONFIG_DRIVE_PUSH_PULL) &&
1345 (priv->gpio_mode & BIT(gpio)))
1346 return 0;
1347
1348 if ((param == PIN_CONFIG_DRIVE_OPEN_DRAIN) &&
1349 !(priv->gpio_mode & BIT(gpio)))
1350 return 0;
1351
1352 return -ENOTSUPP;
1353 }
1354
1355 /*
1356 * This function is for configuring GPIO using shared pins, where other signals
1357 * are made unavailable by configuring the use of GPIO. This is believed to be
1358 * only applicable to the cp2105 at this point, the other devices supported by
1359 * this driver that provide GPIO do so in a way that does not impact other
1360 * signals and are thus expected to have very different initialisation.
1361 */
1362 static int cp2105_shared_gpio_init(struct usb_serial *serial)
1363 {
1364 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1365 struct cp210x_pin_mode mode;
1366 struct cp210x_config config;
1367 u8 intf_num = cp210x_interface_num(serial);
1368 int result;
1369
1370 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1371 CP210X_GET_DEVICEMODE, &mode,
1372 sizeof(mode));
1373 if (result < 0)
1374 return result;
1375
1376 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1377 CP210X_GET_PORTCONFIG, &config,
1378 sizeof(config));
1379 if (result < 0)
1380 return result;
1381
1382 /* 2 banks of GPIO - One for the pins taken from each serial port */
1383 if (intf_num == 0) {
1384 if (mode.eci == CP210X_PIN_MODE_MODEM)
1385 return 0;
1386
1387 priv->config = config.eci_cfg;
1388 priv->gpio_mode = (u8)((le16_to_cpu(config.gpio_mode) &
1389 CP210X_ECI_GPIO_MODE_MASK) >>
1390 CP210X_ECI_GPIO_MODE_OFFSET);
1391 priv->gc.ngpio = 2;
1392 } else if (intf_num == 1) {
1393 if (mode.sci == CP210X_PIN_MODE_MODEM)
1394 return 0;
1395
1396 priv->config = config.sci_cfg;
1397 priv->gpio_mode = (u8)((le16_to_cpu(config.gpio_mode) &
1398 CP210X_SCI_GPIO_MODE_MASK) >>
1399 CP210X_SCI_GPIO_MODE_OFFSET);
1400 priv->gc.ngpio = 3;
1401 } else {
1402 return -ENODEV;
1403 }
1404
1405 priv->gc.label = "cp210x";
1406 priv->gc.request = cp210x_gpio_request;
1407 priv->gc.get_direction = cp210x_gpio_direction_get;
1408 priv->gc.direction_input = cp210x_gpio_direction_input;
1409 priv->gc.direction_output = cp210x_gpio_direction_output;
1410 priv->gc.get = cp210x_gpio_get;
1411 priv->gc.set = cp210x_gpio_set;
1412 priv->gc.set_config = cp210x_gpio_set_config;
1413 priv->gc.owner = THIS_MODULE;
1414 priv->gc.parent = &serial->interface->dev;
1415 priv->gc.base = -1;
1416 priv->gc.can_sleep = true;
1417
1418 result = gpiochip_add_data(&priv->gc, serial);
1419 if (!result)
1420 priv->gpio_registered = true;
1421
1422 return result;
1423 }
1424
1425 static void cp210x_gpio_remove(struct usb_serial *serial)
1426 {
1427 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1428
1429 if (priv->gpio_registered) {
1430 gpiochip_remove(&priv->gc);
1431 priv->gpio_registered = false;
1432 }
1433 }
1434
1435 #else
1436
1437 static int cp2105_shared_gpio_init(struct usb_serial *serial)
1438 {
1439 return 0;
1440 }
1441
1442 static void cp210x_gpio_remove(struct usb_serial *serial)
1443 {
1444 /* Nothing to do */
1445 }
1446
1447 #endif
1448
1449 static int cp210x_port_probe(struct usb_serial_port *port)
1450 {
1451 struct usb_serial *serial = port->serial;
1452 struct cp210x_port_private *port_priv;
1453 int ret;
1454
1455 port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
1456 if (!port_priv)
1457 return -ENOMEM;
1458
1459 port_priv->bInterfaceNumber = cp210x_interface_num(serial);
1460
1461 usb_set_serial_port_data(port, port_priv);
1462
1463 ret = cp210x_detect_swapped_line_ctl(port);
1464 if (ret) {
1465 kfree(port_priv);
1466 return ret;
1467 }
1468
1469 return 0;
1470 }
1471
1472 static int cp210x_port_remove(struct usb_serial_port *port)
1473 {
1474 struct cp210x_port_private *port_priv;
1475
1476 port_priv = usb_get_serial_port_data(port);
1477 kfree(port_priv);
1478
1479 return 0;
1480 }
1481
1482 static int cp210x_attach(struct usb_serial *serial)
1483 {
1484 int result;
1485 struct cp210x_serial_private *priv;
1486
1487 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1488 if (!priv)
1489 return -ENOMEM;
1490
1491 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1492 CP210X_GET_PARTNUM, &priv->partnum,
1493 sizeof(priv->partnum));
1494 if (result < 0)
1495 goto err_free_priv;
1496
1497 usb_set_serial_data(serial, priv);
1498
1499 if (priv->partnum == CP210X_PARTNUM_CP2105) {
1500 result = cp2105_shared_gpio_init(serial);
1501 if (result < 0) {
1502 dev_err(&serial->interface->dev,
1503 "GPIO initialisation failed, continuing without GPIO support\n");
1504 }
1505 }
1506
1507 return 0;
1508 err_free_priv:
1509 kfree(priv);
1510
1511 return result;
1512 }
1513
1514 static void cp210x_disconnect(struct usb_serial *serial)
1515 {
1516 cp210x_gpio_remove(serial);
1517 }
1518
1519 static void cp210x_release(struct usb_serial *serial)
1520 {
1521 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1522
1523 cp210x_gpio_remove(serial);
1524
1525 kfree(priv);
1526 }
1527
1528 module_usb_serial_driver(serial_drivers, id_table);
1529
1530 MODULE_DESCRIPTION(DRIVER_DESC);
1531 MODULE_LICENSE("GPL");
CRIS linux kernel tree