4 * Copyright (C) 2014 Broadcom Corporation
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/etherdevice.h>
13 #include <linux/list.h>
14 #include <linux/slab.h>
18 /* This tag length is 4 bytes, older ones were 6 bytes, we do not
21 #define BRCM_TAG_LEN 4
23 /* Tag is constructed and desconstructed using byte by byte access
24 * because the tag is placed after the MAC Source Address, which does
25 * not make it 4-bytes aligned, so this might cause unaligned accesses
26 * on most systems where this is used.
29 /* Ingress and egress opcodes */
30 #define BRCM_OPCODE_SHIFT 5
31 #define BRCM_OPCODE_MASK 0x7
34 /* 1st byte in the tag */
35 #define BRCM_IG_TC_SHIFT 2
36 #define BRCM_IG_TC_MASK 0x7
37 /* 2nd byte in the tag */
38 #define BRCM_IG_TE_MASK 0x3
39 #define BRCM_IG_TS_SHIFT 7
40 /* 3rd byte in the tag */
41 #define BRCM_IG_DSTMAP2_MASK 1
42 #define BRCM_IG_DSTMAP1_MASK 0xff
46 /* 2nd byte in the tag */
47 #define BRCM_EG_CID_MASK 0xff
49 /* 3rd byte in the tag */
50 #define BRCM_EG_RC_MASK 0xff
51 #define BRCM_EG_RC_RSVD (3 << 6)
52 #define BRCM_EG_RC_EXCEPTION (1 << 5)
53 #define BRCM_EG_RC_PROT_SNOOP (1 << 4)
54 #define BRCM_EG_RC_PROT_TERM (1 << 3)
55 #define BRCM_EG_RC_SWITCH (1 << 2)
56 #define BRCM_EG_RC_MAC_LEARN (1 << 1)
57 #define BRCM_EG_RC_MIRROR (1 << 0)
58 #define BRCM_EG_TC_SHIFT 5
59 #define BRCM_EG_TC_MASK 0x7
60 #define BRCM_EG_PID_MASK 0x1f
62 static struct sk_buff
*brcm_tag_xmit_ll(struct sk_buff
*skb
,
63 struct net_device
*dev
,
66 struct dsa_port
*dp
= dsa_slave_to_port(dev
);
67 u16 queue
= skb_get_queue_mapping(skb
);
70 if (skb_cow_head(skb
, BRCM_TAG_LEN
) < 0)
73 /* The Ethernet switch we are interfaced with needs packets to be at
74 * least 64 bytes (including FCS) otherwise they will be discarded when
75 * they enter the switch port logic. When Broadcom tags are enabled, we
76 * need to make sure that packets are at least 68 bytes
77 * (including FCS and tag) because the length verification is done after
78 * the Broadcom tag is stripped off the ingress packet.
80 * Let dsa_slave_xmit() free the SKB
82 if (__skb_put_padto(skb
, ETH_ZLEN
+ BRCM_TAG_LEN
, false))
85 skb_push(skb
, BRCM_TAG_LEN
);
88 memmove(skb
->data
, skb
->data
+ BRCM_TAG_LEN
, offset
);
90 brcm_tag
= skb
->data
+ offset
;
92 /* Set the ingress opcode, traffic class, tag enforcment is
95 brcm_tag
[0] = (1 << BRCM_OPCODE_SHIFT
) |
96 ((queue
& BRCM_IG_TC_MASK
) << BRCM_IG_TC_SHIFT
);
100 brcm_tag
[2] = BRCM_IG_DSTMAP2_MASK
;
101 brcm_tag
[3] = (1 << dp
->index
) & BRCM_IG_DSTMAP1_MASK
;
103 /* Now tell the master network device about the desired output queue
106 skb_set_queue_mapping(skb
, BRCM_TAG_SET_PORT_QUEUE(dp
->index
, queue
));
111 static struct sk_buff
*brcm_tag_rcv_ll(struct sk_buff
*skb
,
112 struct net_device
*dev
,
113 struct packet_type
*pt
,
119 if (unlikely(!pskb_may_pull(skb
, BRCM_TAG_LEN
)))
122 brcm_tag
= skb
->data
- offset
;
124 /* The opcode should never be different than 0b000 */
125 if (unlikely((brcm_tag
[0] >> BRCM_OPCODE_SHIFT
) & BRCM_OPCODE_MASK
))
128 /* We should never see a reserved reason code without knowing how to
131 if (unlikely(brcm_tag
[2] & BRCM_EG_RC_RSVD
))
134 /* Locate which port this is coming from */
135 source_port
= brcm_tag
[3] & BRCM_EG_PID_MASK
;
137 skb
->dev
= dsa_master_find_slave(dev
, 0, source_port
);
141 /* Remove Broadcom tag and update checksum */
142 skb_pull_rcsum(skb
, BRCM_TAG_LEN
);
147 #ifdef CONFIG_NET_DSA_TAG_BRCM
148 static struct sk_buff
*brcm_tag_xmit(struct sk_buff
*skb
,
149 struct net_device
*dev
)
151 /* Build the tag after the MAC Source Address */
152 return brcm_tag_xmit_ll(skb
, dev
, 2 * ETH_ALEN
);
156 static struct sk_buff
*brcm_tag_rcv(struct sk_buff
*skb
, struct net_device
*dev
,
157 struct packet_type
*pt
)
159 struct sk_buff
*nskb
;
161 /* skb->data points to the EtherType, the tag is right before it */
162 nskb
= brcm_tag_rcv_ll(skb
, dev
, pt
, 2);
166 /* Move the Ethernet DA and SA */
167 memmove(nskb
->data
- ETH_HLEN
,
168 nskb
->data
- ETH_HLEN
- BRCM_TAG_LEN
,
174 const struct dsa_device_ops brcm_netdev_ops
= {
175 .xmit
= brcm_tag_xmit
,
180 #ifdef CONFIG_NET_DSA_TAG_BRCM_PREPEND
181 static struct sk_buff
*brcm_tag_xmit_prepend(struct sk_buff
*skb
,
182 struct net_device
*dev
)
184 /* tag is prepended to the packet */
185 return brcm_tag_xmit_ll(skb
, dev
, 0);
188 static struct sk_buff
*brcm_tag_rcv_prepend(struct sk_buff
*skb
,
189 struct net_device
*dev
,
190 struct packet_type
*pt
)
192 /* tag is prepended to the packet */
193 return brcm_tag_rcv_ll(skb
, dev
, pt
, ETH_HLEN
);
196 const struct dsa_device_ops brcm_prepend_netdev_ops
= {
197 .xmit
= brcm_tag_xmit_prepend
,
198 .rcv
= brcm_tag_rcv_prepend
,