2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/acpi.h>
15 #include <linux/bcd.h>
16 #include <linux/i2c.h>
17 #include <linux/init.h>
18 #include <linux/module.h>
19 #include <linux/of_device.h>
20 #include <linux/rtc/ds1307.h>
21 #include <linux/rtc.h>
22 #include <linux/slab.h>
23 #include <linux/string.h>
24 #include <linux/hwmon.h>
25 #include <linux/hwmon-sysfs.h>
26 #include <linux/clk-provider.h>
27 #include <linux/regmap.h>
30 * We can't determine type by probing, but if we expect pre-Linux code
31 * to have set the chip up as a clock (turning on the oscillator and
32 * setting the date and time), Linux can ignore the non-clock features.
33 * That's a natural job for a factory or repair bench.
49 last_ds_type
/* always last */
50 /* rs5c372 too? different address... */
54 /* RTC registers don't differ much, except for the century flag */
55 #define DS1307_REG_SECS 0x00 /* 00-59 */
56 # define DS1307_BIT_CH 0x80
57 # define DS1340_BIT_nEOSC 0x80
58 # define MCP794XX_BIT_ST 0x80
59 #define DS1307_REG_MIN 0x01 /* 00-59 */
60 # define M41T0_BIT_OF 0x80
61 #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
62 # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
63 # define DS1307_BIT_PM 0x20 /* in REG_HOUR */
64 # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
65 # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
66 #define DS1307_REG_WDAY 0x03 /* 01-07 */
67 # define MCP794XX_BIT_VBATEN 0x08
68 #define DS1307_REG_MDAY 0x04 /* 01-31 */
69 #define DS1307_REG_MONTH 0x05 /* 01-12 */
70 # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
71 #define DS1307_REG_YEAR 0x06 /* 00-99 */
74 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
75 * start at 7, and they differ a LOT. Only control and status matter for
76 * basic RTC date and time functionality; be careful using them.
78 #define DS1307_REG_CONTROL 0x07 /* or ds1338 */
79 # define DS1307_BIT_OUT 0x80
80 # define DS1338_BIT_OSF 0x20
81 # define DS1307_BIT_SQWE 0x10
82 # define DS1307_BIT_RS1 0x02
83 # define DS1307_BIT_RS0 0x01
84 #define DS1337_REG_CONTROL 0x0e
85 # define DS1337_BIT_nEOSC 0x80
86 # define DS1339_BIT_BBSQI 0x20
87 # define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
88 # define DS1337_BIT_RS2 0x10
89 # define DS1337_BIT_RS1 0x08
90 # define DS1337_BIT_INTCN 0x04
91 # define DS1337_BIT_A2IE 0x02
92 # define DS1337_BIT_A1IE 0x01
93 #define DS1340_REG_CONTROL 0x07
94 # define DS1340_BIT_OUT 0x80
95 # define DS1340_BIT_FT 0x40
96 # define DS1340_BIT_CALIB_SIGN 0x20
97 # define DS1340_M_CALIBRATION 0x1f
98 #define DS1340_REG_FLAG 0x09
99 # define DS1340_BIT_OSF 0x80
100 #define DS1337_REG_STATUS 0x0f
101 # define DS1337_BIT_OSF 0x80
102 # define DS3231_BIT_EN32KHZ 0x08
103 # define DS1337_BIT_A2I 0x02
104 # define DS1337_BIT_A1I 0x01
105 #define DS1339_REG_ALARM1_SECS 0x07
107 #define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
109 #define RX8025_REG_CTRL1 0x0e
110 # define RX8025_BIT_2412 0x20
111 #define RX8025_REG_CTRL2 0x0f
112 # define RX8025_BIT_PON 0x10
113 # define RX8025_BIT_VDET 0x40
114 # define RX8025_BIT_XST 0x20
118 u8 offset
; /* register's offset */
121 struct nvmem_config nvmem_cfg
;
124 #define HAS_NVRAM 0 /* bit 0 == sysfs file active */
125 #define HAS_ALARM 1 /* bit 1 == irq claimed */
127 struct regmap
*regmap
;
130 struct rtc_device
*rtc
;
131 #ifdef CONFIG_COMMON_CLK
132 struct clk_hw clks
[2];
141 u8 century_enable_bit
;
143 u16 trickle_charger_reg
;
144 u8 trickle_charger_setup
;
145 u8 (*do_trickle_setup
)(struct ds1307
*, uint32_t,
149 static u8
do_trickle_setup_ds1339(struct ds1307
*, uint32_t ohms
, bool diode
);
151 static struct chip_desc chips
[last_ds_type
] = {
162 .century_reg
= DS1307_REG_MONTH
,
163 .century_bit
= DS1337_BIT_CENTURY
,
171 .century_reg
= DS1307_REG_MONTH
,
172 .century_bit
= DS1337_BIT_CENTURY
,
173 .trickle_charger_reg
= 0x10,
174 .do_trickle_setup
= &do_trickle_setup_ds1339
,
177 .century_reg
= DS1307_REG_HOUR
,
178 .century_enable_bit
= DS1340_BIT_CENTURY_EN
,
179 .century_bit
= DS1340_BIT_CENTURY
,
180 .trickle_charger_reg
= 0x08,
183 .trickle_charger_reg
= 0x0a,
187 .century_reg
= DS1307_REG_MONTH
,
188 .century_bit
= DS1337_BIT_CENTURY
,
192 /* this is battery backed SRAM */
193 .nvram_offset
= 0x20,
194 .nvram_size
= 4, /* 32bit (4 word x 8 bit) */
198 /* this is battery backed SRAM */
199 .nvram_offset
= 0x20,
204 static const struct i2c_device_id ds1307_id
[] = {
205 { "ds1307", ds_1307
},
206 { "ds1308", ds_1308
},
207 { "ds1337", ds_1337
},
208 { "ds1338", ds_1338
},
209 { "ds1339", ds_1339
},
210 { "ds1388", ds_1388
},
211 { "ds1340", ds_1340
},
212 { "ds3231", ds_3231
},
214 { "m41t00", m41t00
},
215 { "mcp7940x", mcp794xx
},
216 { "mcp7941x", mcp794xx
},
217 { "pt7c4338", ds_1307
},
218 { "rx8025", rx_8025
},
219 { "isl12057", ds_1337
},
220 { "rx8130", rx_8130
},
223 MODULE_DEVICE_TABLE(i2c
, ds1307_id
);
226 static const struct of_device_id ds1307_of_match
[] = {
228 .compatible
= "dallas,ds1307",
229 .data
= (void *)ds_1307
232 .compatible
= "dallas,ds1308",
233 .data
= (void *)ds_1308
236 .compatible
= "dallas,ds1337",
237 .data
= (void *)ds_1337
240 .compatible
= "dallas,ds1338",
241 .data
= (void *)ds_1338
244 .compatible
= "dallas,ds1339",
245 .data
= (void *)ds_1339
248 .compatible
= "dallas,ds1388",
249 .data
= (void *)ds_1388
252 .compatible
= "dallas,ds1340",
253 .data
= (void *)ds_1340
256 .compatible
= "maxim,ds3231",
257 .data
= (void *)ds_3231
260 .compatible
= "st,m41t0",
261 .data
= (void *)m41t00
264 .compatible
= "st,m41t00",
265 .data
= (void *)m41t00
268 .compatible
= "microchip,mcp7940x",
269 .data
= (void *)mcp794xx
272 .compatible
= "microchip,mcp7941x",
273 .data
= (void *)mcp794xx
276 .compatible
= "pericom,pt7c4338",
277 .data
= (void *)ds_1307
280 .compatible
= "epson,rx8025",
281 .data
= (void *)rx_8025
284 .compatible
= "isil,isl12057",
285 .data
= (void *)ds_1337
289 MODULE_DEVICE_TABLE(of
, ds1307_of_match
);
293 static const struct acpi_device_id ds1307_acpi_ids
[] = {
294 { .id
= "DS1307", .driver_data
= ds_1307
},
295 { .id
= "DS1308", .driver_data
= ds_1308
},
296 { .id
= "DS1337", .driver_data
= ds_1337
},
297 { .id
= "DS1338", .driver_data
= ds_1338
},
298 { .id
= "DS1339", .driver_data
= ds_1339
},
299 { .id
= "DS1388", .driver_data
= ds_1388
},
300 { .id
= "DS1340", .driver_data
= ds_1340
},
301 { .id
= "DS3231", .driver_data
= ds_3231
},
302 { .id
= "M41T0", .driver_data
= m41t0
},
303 { .id
= "M41T00", .driver_data
= m41t00
},
304 { .id
= "MCP7940X", .driver_data
= mcp794xx
},
305 { .id
= "MCP7941X", .driver_data
= mcp794xx
},
306 { .id
= "PT7C4338", .driver_data
= ds_1307
},
307 { .id
= "RX8025", .driver_data
= rx_8025
},
308 { .id
= "ISL12057", .driver_data
= ds_1337
},
311 MODULE_DEVICE_TABLE(acpi
, ds1307_acpi_ids
);
315 * The ds1337 and ds1339 both have two alarms, but we only use the first
316 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
317 * signal; ds1339 chips have only one alarm signal.
319 static irqreturn_t
ds1307_irq(int irq
, void *dev_id
)
321 struct ds1307
*ds1307
= dev_id
;
322 struct mutex
*lock
= &ds1307
->rtc
->ops_lock
;
326 ret
= regmap_read(ds1307
->regmap
, DS1337_REG_STATUS
, &stat
);
330 if (stat
& DS1337_BIT_A1I
) {
331 stat
&= ~DS1337_BIT_A1I
;
332 regmap_write(ds1307
->regmap
, DS1337_REG_STATUS
, stat
);
334 ret
= regmap_update_bits(ds1307
->regmap
, DS1337_REG_CONTROL
,
339 rtc_update_irq(ds1307
->rtc
, 1, RTC_AF
| RTC_IRQF
);
348 /*----------------------------------------------------------------------*/
350 static int ds1307_get_time(struct device
*dev
, struct rtc_time
*t
)
352 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
354 const struct chip_desc
*chip
= &chips
[ds1307
->type
];
356 /* read the RTC date and time registers all at once */
357 ret
= regmap_bulk_read(ds1307
->regmap
, ds1307
->offset
, ds1307
->regs
, 7);
359 dev_err(dev
, "%s error %d\n", "read", ret
);
363 dev_dbg(dev
, "%s: %7ph\n", "read", ds1307
->regs
);
365 /* if oscillator fail bit is set, no data can be trusted */
366 if (ds1307
->type
== m41t0
&&
367 ds1307
->regs
[DS1307_REG_MIN
] & M41T0_BIT_OF
) {
368 dev_warn_once(dev
, "oscillator failed, set time!\n");
372 t
->tm_sec
= bcd2bin(ds1307
->regs
[DS1307_REG_SECS
] & 0x7f);
373 t
->tm_min
= bcd2bin(ds1307
->regs
[DS1307_REG_MIN
] & 0x7f);
374 tmp
= ds1307
->regs
[DS1307_REG_HOUR
] & 0x3f;
375 t
->tm_hour
= bcd2bin(tmp
);
376 t
->tm_wday
= bcd2bin(ds1307
->regs
[DS1307_REG_WDAY
] & 0x07) - 1;
377 t
->tm_mday
= bcd2bin(ds1307
->regs
[DS1307_REG_MDAY
] & 0x3f);
378 tmp
= ds1307
->regs
[DS1307_REG_MONTH
] & 0x1f;
379 t
->tm_mon
= bcd2bin(tmp
) - 1;
380 t
->tm_year
= bcd2bin(ds1307
->regs
[DS1307_REG_YEAR
]) + 100;
382 if (ds1307
->regs
[chip
->century_reg
] & chip
->century_bit
&&
383 IS_ENABLED(CONFIG_RTC_DRV_DS1307_CENTURY
))
386 dev_dbg(dev
, "%s secs=%d, mins=%d, "
387 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
388 "read", t
->tm_sec
, t
->tm_min
,
389 t
->tm_hour
, t
->tm_mday
,
390 t
->tm_mon
, t
->tm_year
, t
->tm_wday
);
392 /* initial clock setting can be undefined */
393 return rtc_valid_tm(t
);
396 static int ds1307_set_time(struct device
*dev
, struct rtc_time
*t
)
398 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
399 const struct chip_desc
*chip
= &chips
[ds1307
->type
];
402 u8
*buf
= ds1307
->regs
;
404 dev_dbg(dev
, "%s secs=%d, mins=%d, "
405 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
406 "write", t
->tm_sec
, t
->tm_min
,
407 t
->tm_hour
, t
->tm_mday
,
408 t
->tm_mon
, t
->tm_year
, t
->tm_wday
);
410 if (t
->tm_year
< 100)
413 #ifdef CONFIG_RTC_DRV_DS1307_CENTURY
414 if (t
->tm_year
> (chip
->century_bit
? 299 : 199))
417 if (t
->tm_year
> 199)
421 buf
[DS1307_REG_SECS
] = bin2bcd(t
->tm_sec
);
422 buf
[DS1307_REG_MIN
] = bin2bcd(t
->tm_min
);
423 buf
[DS1307_REG_HOUR
] = bin2bcd(t
->tm_hour
);
424 buf
[DS1307_REG_WDAY
] = bin2bcd(t
->tm_wday
+ 1);
425 buf
[DS1307_REG_MDAY
] = bin2bcd(t
->tm_mday
);
426 buf
[DS1307_REG_MONTH
] = bin2bcd(t
->tm_mon
+ 1);
428 /* assume 20YY not 19YY */
429 tmp
= t
->tm_year
- 100;
430 buf
[DS1307_REG_YEAR
] = bin2bcd(tmp
);
432 if (chip
->century_enable_bit
)
433 buf
[chip
->century_reg
] |= chip
->century_enable_bit
;
434 if (t
->tm_year
> 199 && chip
->century_bit
)
435 buf
[chip
->century_reg
] |= chip
->century_bit
;
437 if (ds1307
->type
== mcp794xx
) {
439 * these bits were cleared when preparing the date/time
440 * values and need to be set again before writing the
441 * buffer out to the device.
443 buf
[DS1307_REG_SECS
] |= MCP794XX_BIT_ST
;
444 buf
[DS1307_REG_WDAY
] |= MCP794XX_BIT_VBATEN
;
447 dev_dbg(dev
, "%s: %7ph\n", "write", buf
);
449 result
= regmap_bulk_write(ds1307
->regmap
, ds1307
->offset
, buf
, 7);
451 dev_err(dev
, "%s error %d\n", "write", result
);
457 static int ds1337_read_alarm(struct device
*dev
, struct rtc_wkalrm
*t
)
459 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
462 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
465 /* read all ALARM1, ALARM2, and status registers at once */
466 ret
= regmap_bulk_read(ds1307
->regmap
, DS1339_REG_ALARM1_SECS
,
469 dev_err(dev
, "%s error %d\n", "alarm read", ret
);
473 dev_dbg(dev
, "%s: %4ph, %3ph, %2ph\n", "alarm read",
474 &ds1307
->regs
[0], &ds1307
->regs
[4], &ds1307
->regs
[7]);
477 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
478 * and that all four fields are checked matches
480 t
->time
.tm_sec
= bcd2bin(ds1307
->regs
[0] & 0x7f);
481 t
->time
.tm_min
= bcd2bin(ds1307
->regs
[1] & 0x7f);
482 t
->time
.tm_hour
= bcd2bin(ds1307
->regs
[2] & 0x3f);
483 t
->time
.tm_mday
= bcd2bin(ds1307
->regs
[3] & 0x3f);
486 t
->enabled
= !!(ds1307
->regs
[7] & DS1337_BIT_A1IE
);
487 t
->pending
= !!(ds1307
->regs
[8] & DS1337_BIT_A1I
);
489 dev_dbg(dev
, "%s secs=%d, mins=%d, "
490 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
491 "alarm read", t
->time
.tm_sec
, t
->time
.tm_min
,
492 t
->time
.tm_hour
, t
->time
.tm_mday
,
493 t
->enabled
, t
->pending
);
498 static int ds1337_set_alarm(struct device
*dev
, struct rtc_wkalrm
*t
)
500 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
501 unsigned char *buf
= ds1307
->regs
;
505 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
508 dev_dbg(dev
, "%s secs=%d, mins=%d, "
509 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
510 "alarm set", t
->time
.tm_sec
, t
->time
.tm_min
,
511 t
->time
.tm_hour
, t
->time
.tm_mday
,
512 t
->enabled
, t
->pending
);
514 /* read current status of both alarms and the chip */
515 ret
= regmap_bulk_read(ds1307
->regmap
, DS1339_REG_ALARM1_SECS
, buf
, 9);
517 dev_err(dev
, "%s error %d\n", "alarm write", ret
);
520 control
= ds1307
->regs
[7];
521 status
= ds1307
->regs
[8];
523 dev_dbg(dev
, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
524 &ds1307
->regs
[0], &ds1307
->regs
[4], control
, status
);
526 /* set ALARM1, using 24 hour and day-of-month modes */
527 buf
[0] = bin2bcd(t
->time
.tm_sec
);
528 buf
[1] = bin2bcd(t
->time
.tm_min
);
529 buf
[2] = bin2bcd(t
->time
.tm_hour
);
530 buf
[3] = bin2bcd(t
->time
.tm_mday
);
532 /* set ALARM2 to non-garbage */
538 buf
[7] = control
& ~(DS1337_BIT_A1IE
| DS1337_BIT_A2IE
);
539 buf
[8] = status
& ~(DS1337_BIT_A1I
| DS1337_BIT_A2I
);
541 ret
= regmap_bulk_write(ds1307
->regmap
, DS1339_REG_ALARM1_SECS
, buf
, 9);
543 dev_err(dev
, "can't set alarm time\n");
547 /* optionally enable ALARM1 */
549 dev_dbg(dev
, "alarm IRQ armed\n");
550 buf
[7] |= DS1337_BIT_A1IE
; /* only ALARM1 is used */
551 regmap_write(ds1307
->regmap
, DS1337_REG_CONTROL
, buf
[7]);
557 static int ds1307_alarm_irq_enable(struct device
*dev
, unsigned int enabled
)
559 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
561 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
564 return regmap_update_bits(ds1307
->regmap
, DS1337_REG_CONTROL
,
566 enabled
? DS1337_BIT_A1IE
: 0);
569 static const struct rtc_class_ops ds13xx_rtc_ops
= {
570 .read_time
= ds1307_get_time
,
571 .set_time
= ds1307_set_time
,
572 .read_alarm
= ds1337_read_alarm
,
573 .set_alarm
= ds1337_set_alarm
,
574 .alarm_irq_enable
= ds1307_alarm_irq_enable
,
577 /*----------------------------------------------------------------------*/
580 * Alarm support for rx8130 devices.
583 #define RX8130_REG_ALARM_MIN 0x07
584 #define RX8130_REG_ALARM_HOUR 0x08
585 #define RX8130_REG_ALARM_WEEK_OR_DAY 0x09
586 #define RX8130_REG_EXTENSION 0x0c
587 #define RX8130_REG_EXTENSION_WADA (1 << 3)
588 #define RX8130_REG_FLAG 0x0d
589 #define RX8130_REG_FLAG_AF (1 << 3)
590 #define RX8130_REG_CONTROL0 0x0e
591 #define RX8130_REG_CONTROL0_AIE (1 << 3)
593 static irqreturn_t
rx8130_irq(int irq
, void *dev_id
)
595 struct ds1307
*ds1307
= dev_id
;
596 struct mutex
*lock
= &ds1307
->rtc
->ops_lock
;
602 /* Read control registers. */
603 ret
= regmap_bulk_read(ds1307
->regmap
, RX8130_REG_EXTENSION
, ctl
, 3);
606 if (!(ctl
[1] & RX8130_REG_FLAG_AF
))
608 ctl
[1] &= ~RX8130_REG_FLAG_AF
;
609 ctl
[2] &= ~RX8130_REG_CONTROL0_AIE
;
611 ret
= regmap_bulk_write(ds1307
->regmap
, RX8130_REG_EXTENSION
, ctl
, 3);
615 rtc_update_irq(ds1307
->rtc
, 1, RTC_AF
| RTC_IRQF
);
623 static int rx8130_read_alarm(struct device
*dev
, struct rtc_wkalrm
*t
)
625 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
629 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
632 /* Read alarm registers. */
633 ret
= regmap_bulk_read(ds1307
->regmap
, RX8130_REG_ALARM_MIN
, ald
, 3);
637 /* Read control registers. */
638 ret
= regmap_bulk_read(ds1307
->regmap
, RX8130_REG_EXTENSION
, ctl
, 3);
642 t
->enabled
= !!(ctl
[2] & RX8130_REG_CONTROL0_AIE
);
643 t
->pending
= !!(ctl
[1] & RX8130_REG_FLAG_AF
);
645 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
647 t
->time
.tm_min
= bcd2bin(ald
[0] & 0x7f);
648 t
->time
.tm_hour
= bcd2bin(ald
[1] & 0x7f);
649 t
->time
.tm_wday
= -1;
650 t
->time
.tm_mday
= bcd2bin(ald
[2] & 0x7f);
652 t
->time
.tm_year
= -1;
653 t
->time
.tm_yday
= -1;
654 t
->time
.tm_isdst
= -1;
656 dev_dbg(dev
, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
657 __func__
, t
->time
.tm_sec
, t
->time
.tm_min
, t
->time
.tm_hour
,
658 t
->time
.tm_wday
, t
->time
.tm_mday
, t
->time
.tm_mon
, t
->enabled
);
663 static int rx8130_set_alarm(struct device
*dev
, struct rtc_wkalrm
*t
)
665 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
669 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
672 dev_dbg(dev
, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
673 "enabled=%d pending=%d\n", __func__
,
674 t
->time
.tm_sec
, t
->time
.tm_min
, t
->time
.tm_hour
,
675 t
->time
.tm_wday
, t
->time
.tm_mday
, t
->time
.tm_mon
,
676 t
->enabled
, t
->pending
);
678 /* Read control registers. */
679 ret
= regmap_bulk_read(ds1307
->regmap
, RX8130_REG_EXTENSION
, ctl
, 3);
683 ctl
[0] &= ~RX8130_REG_EXTENSION_WADA
;
684 ctl
[1] |= RX8130_REG_FLAG_AF
;
685 ctl
[2] &= ~RX8130_REG_CONTROL0_AIE
;
687 ret
= regmap_bulk_write(ds1307
->regmap
, RX8130_REG_EXTENSION
, ctl
, 3);
691 /* Hardware alarm precision is 1 minute! */
692 ald
[0] = bin2bcd(t
->time
.tm_min
);
693 ald
[1] = bin2bcd(t
->time
.tm_hour
);
694 ald
[2] = bin2bcd(t
->time
.tm_mday
);
696 ret
= regmap_bulk_write(ds1307
->regmap
, RX8130_REG_ALARM_MIN
, ald
, 3);
703 ctl
[2] |= RX8130_REG_CONTROL0_AIE
;
705 return regmap_bulk_write(ds1307
->regmap
, RX8130_REG_EXTENSION
, ctl
, 3);
708 static int rx8130_alarm_irq_enable(struct device
*dev
, unsigned int enabled
)
710 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
713 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
716 ret
= regmap_read(ds1307
->regmap
, RX8130_REG_CONTROL0
, ®
);
721 reg
|= RX8130_REG_CONTROL0_AIE
;
723 reg
&= ~RX8130_REG_CONTROL0_AIE
;
725 return regmap_write(ds1307
->regmap
, RX8130_REG_CONTROL0
, reg
);
728 static const struct rtc_class_ops rx8130_rtc_ops
= {
729 .read_time
= ds1307_get_time
,
730 .set_time
= ds1307_set_time
,
731 .read_alarm
= rx8130_read_alarm
,
732 .set_alarm
= rx8130_set_alarm
,
733 .alarm_irq_enable
= rx8130_alarm_irq_enable
,
736 /*----------------------------------------------------------------------*/
739 * Alarm support for mcp794xx devices.
742 #define MCP794XX_REG_WEEKDAY 0x3
743 #define MCP794XX_REG_WEEKDAY_WDAY_MASK 0x7
744 #define MCP794XX_REG_CONTROL 0x07
745 # define MCP794XX_BIT_ALM0_EN 0x10
746 # define MCP794XX_BIT_ALM1_EN 0x20
747 #define MCP794XX_REG_ALARM0_BASE 0x0a
748 #define MCP794XX_REG_ALARM0_CTRL 0x0d
749 #define MCP794XX_REG_ALARM1_BASE 0x11
750 #define MCP794XX_REG_ALARM1_CTRL 0x14
751 # define MCP794XX_BIT_ALMX_IF (1 << 3)
752 # define MCP794XX_BIT_ALMX_C0 (1 << 4)
753 # define MCP794XX_BIT_ALMX_C1 (1 << 5)
754 # define MCP794XX_BIT_ALMX_C2 (1 << 6)
755 # define MCP794XX_BIT_ALMX_POL (1 << 7)
756 # define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
757 MCP794XX_BIT_ALMX_C1 | \
758 MCP794XX_BIT_ALMX_C2)
760 static irqreturn_t
mcp794xx_irq(int irq
, void *dev_id
)
762 struct ds1307
*ds1307
= dev_id
;
763 struct mutex
*lock
= &ds1307
->rtc
->ops_lock
;
768 /* Check and clear alarm 0 interrupt flag. */
769 ret
= regmap_read(ds1307
->regmap
, MCP794XX_REG_ALARM0_CTRL
, ®
);
772 if (!(reg
& MCP794XX_BIT_ALMX_IF
))
774 reg
&= ~MCP794XX_BIT_ALMX_IF
;
775 ret
= regmap_write(ds1307
->regmap
, MCP794XX_REG_ALARM0_CTRL
, reg
);
779 /* Disable alarm 0. */
780 ret
= regmap_update_bits(ds1307
->regmap
, MCP794XX_REG_CONTROL
,
781 MCP794XX_BIT_ALM0_EN
, 0);
785 rtc_update_irq(ds1307
->rtc
, 1, RTC_AF
| RTC_IRQF
);
793 static int mcp794xx_read_alarm(struct device
*dev
, struct rtc_wkalrm
*t
)
795 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
796 u8
*regs
= ds1307
->regs
;
799 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
802 /* Read control and alarm 0 registers. */
803 ret
= regmap_bulk_read(ds1307
->regmap
, MCP794XX_REG_CONTROL
, regs
, 10);
807 t
->enabled
= !!(regs
[0] & MCP794XX_BIT_ALM0_EN
);
809 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
810 t
->time
.tm_sec
= bcd2bin(ds1307
->regs
[3] & 0x7f);
811 t
->time
.tm_min
= bcd2bin(ds1307
->regs
[4] & 0x7f);
812 t
->time
.tm_hour
= bcd2bin(ds1307
->regs
[5] & 0x3f);
813 t
->time
.tm_wday
= bcd2bin(ds1307
->regs
[6] & 0x7) - 1;
814 t
->time
.tm_mday
= bcd2bin(ds1307
->regs
[7] & 0x3f);
815 t
->time
.tm_mon
= bcd2bin(ds1307
->regs
[8] & 0x1f) - 1;
816 t
->time
.tm_year
= -1;
817 t
->time
.tm_yday
= -1;
818 t
->time
.tm_isdst
= -1;
820 dev_dbg(dev
, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
821 "enabled=%d polarity=%d irq=%d match=%d\n", __func__
,
822 t
->time
.tm_sec
, t
->time
.tm_min
, t
->time
.tm_hour
,
823 t
->time
.tm_wday
, t
->time
.tm_mday
, t
->time
.tm_mon
, t
->enabled
,
824 !!(ds1307
->regs
[6] & MCP794XX_BIT_ALMX_POL
),
825 !!(ds1307
->regs
[6] & MCP794XX_BIT_ALMX_IF
),
826 (ds1307
->regs
[6] & MCP794XX_MSK_ALMX_MATCH
) >> 4);
831 static int mcp794xx_set_alarm(struct device
*dev
, struct rtc_wkalrm
*t
)
833 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
834 unsigned char *regs
= ds1307
->regs
;
837 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
840 dev_dbg(dev
, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
841 "enabled=%d pending=%d\n", __func__
,
842 t
->time
.tm_sec
, t
->time
.tm_min
, t
->time
.tm_hour
,
843 t
->time
.tm_wday
, t
->time
.tm_mday
, t
->time
.tm_mon
,
844 t
->enabled
, t
->pending
);
846 /* Read control and alarm 0 registers. */
847 ret
= regmap_bulk_read(ds1307
->regmap
, MCP794XX_REG_CONTROL
, regs
, 10);
851 /* Set alarm 0, using 24-hour and day-of-month modes. */
852 regs
[3] = bin2bcd(t
->time
.tm_sec
);
853 regs
[4] = bin2bcd(t
->time
.tm_min
);
854 regs
[5] = bin2bcd(t
->time
.tm_hour
);
855 regs
[6] = bin2bcd(t
->time
.tm_wday
+ 1);
856 regs
[7] = bin2bcd(t
->time
.tm_mday
);
857 regs
[8] = bin2bcd(t
->time
.tm_mon
+ 1);
859 /* Clear the alarm 0 interrupt flag. */
860 regs
[6] &= ~MCP794XX_BIT_ALMX_IF
;
861 /* Set alarm match: second, minute, hour, day, date, month. */
862 regs
[6] |= MCP794XX_MSK_ALMX_MATCH
;
863 /* Disable interrupt. We will not enable until completely programmed */
864 regs
[0] &= ~MCP794XX_BIT_ALM0_EN
;
866 ret
= regmap_bulk_write(ds1307
->regmap
, MCP794XX_REG_CONTROL
, regs
, 10);
872 regs
[0] |= MCP794XX_BIT_ALM0_EN
;
873 return regmap_write(ds1307
->regmap
, MCP794XX_REG_CONTROL
, regs
[0]);
876 static int mcp794xx_alarm_irq_enable(struct device
*dev
, unsigned int enabled
)
878 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
880 if (!test_bit(HAS_ALARM
, &ds1307
->flags
))
883 return regmap_update_bits(ds1307
->regmap
, MCP794XX_REG_CONTROL
,
884 MCP794XX_BIT_ALM0_EN
,
885 enabled
? MCP794XX_BIT_ALM0_EN
: 0);
888 static const struct rtc_class_ops mcp794xx_rtc_ops
= {
889 .read_time
= ds1307_get_time
,
890 .set_time
= ds1307_set_time
,
891 .read_alarm
= mcp794xx_read_alarm
,
892 .set_alarm
= mcp794xx_set_alarm
,
893 .alarm_irq_enable
= mcp794xx_alarm_irq_enable
,
896 /*----------------------------------------------------------------------*/
898 static int ds1307_nvram_read(void *priv
, unsigned int offset
, void *val
,
901 struct ds1307
*ds1307
= priv
;
903 return regmap_bulk_read(ds1307
->regmap
, ds1307
->nvram_offset
+ offset
,
907 static int ds1307_nvram_write(void *priv
, unsigned int offset
, void *val
,
910 struct ds1307
*ds1307
= priv
;
912 return regmap_bulk_write(ds1307
->regmap
, ds1307
->nvram_offset
+ offset
,
916 /*----------------------------------------------------------------------*/
918 static u8
do_trickle_setup_ds1339(struct ds1307
*ds1307
,
919 uint32_t ohms
, bool diode
)
921 u8 setup
= (diode
) ? DS1307_TRICKLE_CHARGER_DIODE
:
922 DS1307_TRICKLE_CHARGER_NO_DIODE
;
926 setup
|= DS1307_TRICKLE_CHARGER_250_OHM
;
929 setup
|= DS1307_TRICKLE_CHARGER_2K_OHM
;
932 setup
|= DS1307_TRICKLE_CHARGER_4K_OHM
;
935 dev_warn(ds1307
->dev
,
936 "Unsupported ohm value %u in dt\n", ohms
);
942 static void ds1307_trickle_init(struct ds1307
*ds1307
,
943 struct chip_desc
*chip
)
948 if (!chip
->do_trickle_setup
)
950 if (device_property_read_u32(ds1307
->dev
, "trickle-resistor-ohms",
953 if (device_property_read_bool(ds1307
->dev
, "trickle-diode-disable"))
955 chip
->trickle_charger_setup
= chip
->do_trickle_setup(ds1307
,
961 /*----------------------------------------------------------------------*/
963 #ifdef CONFIG_RTC_DRV_DS1307_HWMON
966 * Temperature sensor support for ds3231 devices.
969 #define DS3231_REG_TEMPERATURE 0x11
972 * A user-initiated temperature conversion is not started by this function,
973 * so the temperature is updated once every 64 seconds.
975 static int ds3231_hwmon_read_temp(struct device
*dev
, s32
*mC
)
977 struct ds1307
*ds1307
= dev_get_drvdata(dev
);
982 ret
= regmap_bulk_read(ds1307
->regmap
, DS3231_REG_TEMPERATURE
,
983 temp_buf
, sizeof(temp_buf
));
987 * Temperature is represented as a 10-bit code with a resolution of
988 * 0.25 degree celsius and encoded in two's complement format.
990 temp
= (temp_buf
[0] << 8) | temp_buf
[1];
997 static ssize_t
ds3231_hwmon_show_temp(struct device
*dev
,
998 struct device_attribute
*attr
, char *buf
)
1003 ret
= ds3231_hwmon_read_temp(dev
, &temp
);
1007 return sprintf(buf
, "%d\n", temp
);
1009 static SENSOR_DEVICE_ATTR(temp1_input
, S_IRUGO
, ds3231_hwmon_show_temp
,
1012 static struct attribute
*ds3231_hwmon_attrs
[] = {
1013 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
1016 ATTRIBUTE_GROUPS(ds3231_hwmon
);
1018 static void ds1307_hwmon_register(struct ds1307
*ds1307
)
1022 if (ds1307
->type
!= ds_3231
)
1025 dev
= devm_hwmon_device_register_with_groups(ds1307
->dev
, ds1307
->name
,
1026 ds1307
, ds3231_hwmon_groups
);
1028 dev_warn(ds1307
->dev
, "unable to register hwmon device %ld\n",
1035 static void ds1307_hwmon_register(struct ds1307
*ds1307
)
1039 #endif /* CONFIG_RTC_DRV_DS1307_HWMON */
1041 /*----------------------------------------------------------------------*/
1044 * Square-wave output support for DS3231
1045 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
1047 #ifdef CONFIG_COMMON_CLK
1054 #define clk_sqw_to_ds1307(clk) \
1055 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
1056 #define clk_32khz_to_ds1307(clk) \
1057 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
1059 static int ds3231_clk_sqw_rates
[] = {
1066 static int ds1337_write_control(struct ds1307
*ds1307
, u8 mask
, u8 value
)
1068 struct mutex
*lock
= &ds1307
->rtc
->ops_lock
;
1072 ret
= regmap_update_bits(ds1307
->regmap
, DS1337_REG_CONTROL
,
1079 static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw
*hw
,
1080 unsigned long parent_rate
)
1082 struct ds1307
*ds1307
= clk_sqw_to_ds1307(hw
);
1086 ret
= regmap_read(ds1307
->regmap
, DS1337_REG_CONTROL
, &control
);
1089 if (control
& DS1337_BIT_RS1
)
1091 if (control
& DS1337_BIT_RS2
)
1094 return ds3231_clk_sqw_rates
[rate_sel
];
1097 static long ds3231_clk_sqw_round_rate(struct clk_hw
*hw
, unsigned long rate
,
1098 unsigned long *prate
)
1102 for (i
= ARRAY_SIZE(ds3231_clk_sqw_rates
) - 1; i
>= 0; i
--) {
1103 if (ds3231_clk_sqw_rates
[i
] <= rate
)
1104 return ds3231_clk_sqw_rates
[i
];
1110 static int ds3231_clk_sqw_set_rate(struct clk_hw
*hw
, unsigned long rate
,
1111 unsigned long parent_rate
)
1113 struct ds1307
*ds1307
= clk_sqw_to_ds1307(hw
);
1117 for (rate_sel
= 0; rate_sel
< ARRAY_SIZE(ds3231_clk_sqw_rates
);
1119 if (ds3231_clk_sqw_rates
[rate_sel
] == rate
)
1123 if (rate_sel
== ARRAY_SIZE(ds3231_clk_sqw_rates
))
1127 control
|= DS1337_BIT_RS1
;
1129 control
|= DS1337_BIT_RS2
;
1131 return ds1337_write_control(ds1307
, DS1337_BIT_RS1
| DS1337_BIT_RS2
,
1135 static int ds3231_clk_sqw_prepare(struct clk_hw
*hw
)
1137 struct ds1307
*ds1307
= clk_sqw_to_ds1307(hw
);
1139 return ds1337_write_control(ds1307
, DS1337_BIT_INTCN
, 0);
1142 static void ds3231_clk_sqw_unprepare(struct clk_hw
*hw
)
1144 struct ds1307
*ds1307
= clk_sqw_to_ds1307(hw
);
1146 ds1337_write_control(ds1307
, DS1337_BIT_INTCN
, DS1337_BIT_INTCN
);
1149 static int ds3231_clk_sqw_is_prepared(struct clk_hw
*hw
)
1151 struct ds1307
*ds1307
= clk_sqw_to_ds1307(hw
);
1154 ret
= regmap_read(ds1307
->regmap
, DS1337_REG_CONTROL
, &control
);
1158 return !(control
& DS1337_BIT_INTCN
);
1161 static const struct clk_ops ds3231_clk_sqw_ops
= {
1162 .prepare
= ds3231_clk_sqw_prepare
,
1163 .unprepare
= ds3231_clk_sqw_unprepare
,
1164 .is_prepared
= ds3231_clk_sqw_is_prepared
,
1165 .recalc_rate
= ds3231_clk_sqw_recalc_rate
,
1166 .round_rate
= ds3231_clk_sqw_round_rate
,
1167 .set_rate
= ds3231_clk_sqw_set_rate
,
1170 static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw
*hw
,
1171 unsigned long parent_rate
)
1176 static int ds3231_clk_32khz_control(struct ds1307
*ds1307
, bool enable
)
1178 struct mutex
*lock
= &ds1307
->rtc
->ops_lock
;
1182 ret
= regmap_update_bits(ds1307
->regmap
, DS1337_REG_STATUS
,
1184 enable
? DS3231_BIT_EN32KHZ
: 0);
1190 static int ds3231_clk_32khz_prepare(struct clk_hw
*hw
)
1192 struct ds1307
*ds1307
= clk_32khz_to_ds1307(hw
);
1194 return ds3231_clk_32khz_control(ds1307
, true);
1197 static void ds3231_clk_32khz_unprepare(struct clk_hw
*hw
)
1199 struct ds1307
*ds1307
= clk_32khz_to_ds1307(hw
);
1201 ds3231_clk_32khz_control(ds1307
, false);
1204 static int ds3231_clk_32khz_is_prepared(struct clk_hw
*hw
)
1206 struct ds1307
*ds1307
= clk_32khz_to_ds1307(hw
);
1209 ret
= regmap_read(ds1307
->regmap
, DS1337_REG_STATUS
, &status
);
1213 return !!(status
& DS3231_BIT_EN32KHZ
);
1216 static const struct clk_ops ds3231_clk_32khz_ops
= {
1217 .prepare
= ds3231_clk_32khz_prepare
,
1218 .unprepare
= ds3231_clk_32khz_unprepare
,
1219 .is_prepared
= ds3231_clk_32khz_is_prepared
,
1220 .recalc_rate
= ds3231_clk_32khz_recalc_rate
,
1223 static struct clk_init_data ds3231_clks_init
[] = {
1224 [DS3231_CLK_SQW
] = {
1225 .name
= "ds3231_clk_sqw",
1226 .ops
= &ds3231_clk_sqw_ops
,
1228 [DS3231_CLK_32KHZ
] = {
1229 .name
= "ds3231_clk_32khz",
1230 .ops
= &ds3231_clk_32khz_ops
,
1234 static int ds3231_clks_register(struct ds1307
*ds1307
)
1236 struct device_node
*node
= ds1307
->dev
->of_node
;
1237 struct clk_onecell_data
*onecell
;
1240 onecell
= devm_kzalloc(ds1307
->dev
, sizeof(*onecell
), GFP_KERNEL
);
1244 onecell
->clk_num
= ARRAY_SIZE(ds3231_clks_init
);
1245 onecell
->clks
= devm_kcalloc(ds1307
->dev
, onecell
->clk_num
,
1246 sizeof(onecell
->clks
[0]), GFP_KERNEL
);
1250 for (i
= 0; i
< ARRAY_SIZE(ds3231_clks_init
); i
++) {
1251 struct clk_init_data init
= ds3231_clks_init
[i
];
1254 * Interrupt signal due to alarm conditions and square-wave
1255 * output share same pin, so don't initialize both.
1257 if (i
== DS3231_CLK_SQW
&& test_bit(HAS_ALARM
, &ds1307
->flags
))
1260 /* optional override of the clockname */
1261 of_property_read_string_index(node
, "clock-output-names", i
,
1263 ds1307
->clks
[i
].init
= &init
;
1265 onecell
->clks
[i
] = devm_clk_register(ds1307
->dev
,
1267 if (IS_ERR(onecell
->clks
[i
]))
1268 return PTR_ERR(onecell
->clks
[i
]);
1274 of_clk_add_provider(node
, of_clk_src_onecell_get
, onecell
);
1279 static void ds1307_clks_register(struct ds1307
*ds1307
)
1283 if (ds1307
->type
!= ds_3231
)
1286 ret
= ds3231_clks_register(ds1307
);
1288 dev_warn(ds1307
->dev
, "unable to register clock device %d\n",
1295 static void ds1307_clks_register(struct ds1307
*ds1307
)
1299 #endif /* CONFIG_COMMON_CLK */
1301 static const struct regmap_config regmap_config
= {
1306 static int ds1307_probe(struct i2c_client
*client
,
1307 const struct i2c_device_id
*id
)
1309 struct ds1307
*ds1307
;
1312 struct chip_desc
*chip
;
1313 bool want_irq
= false;
1314 bool ds1307_can_wakeup_device
= false;
1316 struct ds1307_platform_data
*pdata
= dev_get_platdata(&client
->dev
);
1318 unsigned long timestamp
;
1320 irq_handler_t irq_handler
= ds1307_irq
;
1322 static const int bbsqi_bitpos
[] = {
1324 [ds_1339
] = DS1339_BIT_BBSQI
,
1325 [ds_3231
] = DS3231_BIT_BBSQW
,
1327 const struct rtc_class_ops
*rtc_ops
= &ds13xx_rtc_ops
;
1329 ds1307
= devm_kzalloc(&client
->dev
, sizeof(struct ds1307
), GFP_KERNEL
);
1333 dev_set_drvdata(&client
->dev
, ds1307
);
1334 ds1307
->dev
= &client
->dev
;
1335 ds1307
->name
= client
->name
;
1336 ds1307
->irq
= client
->irq
;
1338 ds1307
->regmap
= devm_regmap_init_i2c(client
, ®map_config
);
1339 if (IS_ERR(ds1307
->regmap
)) {
1340 dev_err(ds1307
->dev
, "regmap allocation failed\n");
1341 return PTR_ERR(ds1307
->regmap
);
1344 i2c_set_clientdata(client
, ds1307
);
1346 if (client
->dev
.of_node
) {
1347 ds1307
->type
= (enum ds_type
)
1348 of_device_get_match_data(&client
->dev
);
1349 chip
= &chips
[ds1307
->type
];
1351 chip
= &chips
[id
->driver_data
];
1352 ds1307
->type
= id
->driver_data
;
1354 const struct acpi_device_id
*acpi_id
;
1356 acpi_id
= acpi_match_device(ACPI_PTR(ds1307_acpi_ids
),
1360 chip
= &chips
[acpi_id
->driver_data
];
1361 ds1307
->type
= acpi_id
->driver_data
;
1365 ds1307_trickle_init(ds1307
, chip
);
1366 else if (pdata
->trickle_charger_setup
)
1367 chip
->trickle_charger_setup
= pdata
->trickle_charger_setup
;
1369 if (chip
->trickle_charger_setup
&& chip
->trickle_charger_reg
) {
1370 dev_dbg(ds1307
->dev
,
1371 "writing trickle charger info 0x%x to 0x%x\n",
1372 DS13XX_TRICKLE_CHARGER_MAGIC
| chip
->trickle_charger_setup
,
1373 chip
->trickle_charger_reg
);
1374 regmap_write(ds1307
->regmap
, chip
->trickle_charger_reg
,
1375 DS13XX_TRICKLE_CHARGER_MAGIC
|
1376 chip
->trickle_charger_setup
);
1383 * For devices with no IRQ directly connected to the SoC, the RTC chip
1384 * can be forced as a wakeup source by stating that explicitly in
1385 * the device's .dts file using the "wakeup-source" boolean property.
1386 * If the "wakeup-source" property is set, don't request an IRQ.
1387 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1388 * if supported by the RTC.
1390 if (of_property_read_bool(client
->dev
.of_node
, "wakeup-source")) {
1391 ds1307_can_wakeup_device
= true;
1393 /* Intersil ISL12057 DT backward compatibility */
1394 if (of_property_read_bool(client
->dev
.of_node
,
1395 "isil,irq2-can-wakeup-machine")) {
1396 ds1307_can_wakeup_device
= true;
1400 switch (ds1307
->type
) {
1404 /* get registers that the "rtc" read below won't read... */
1405 err
= regmap_bulk_read(ds1307
->regmap
, DS1337_REG_CONTROL
,
1408 dev_dbg(ds1307
->dev
, "read error %d\n", err
);
1412 /* oscillator off? turn it on, so clock can tick. */
1413 if (ds1307
->regs
[0] & DS1337_BIT_nEOSC
)
1414 ds1307
->regs
[0] &= ~DS1337_BIT_nEOSC
;
1417 * Using IRQ or defined as wakeup-source?
1418 * Disable the square wave and both alarms.
1419 * For some variants, be sure alarms can trigger when we're
1420 * running on Vbackup (BBSQI/BBSQW)
1422 if (chip
->alarm
&& (ds1307
->irq
> 0 ||
1423 ds1307_can_wakeup_device
)) {
1424 ds1307
->regs
[0] |= DS1337_BIT_INTCN
1425 | bbsqi_bitpos
[ds1307
->type
];
1426 ds1307
->regs
[0] &= ~(DS1337_BIT_A2IE
| DS1337_BIT_A1IE
);
1431 regmap_write(ds1307
->regmap
, DS1337_REG_CONTROL
,
1434 /* oscillator fault? clear flag, and warn */
1435 if (ds1307
->regs
[1] & DS1337_BIT_OSF
) {
1436 regmap_write(ds1307
->regmap
, DS1337_REG_STATUS
,
1437 ds1307
->regs
[1] & ~DS1337_BIT_OSF
);
1438 dev_warn(ds1307
->dev
, "SET TIME!\n");
1443 err
= regmap_bulk_read(ds1307
->regmap
,
1444 RX8025_REG_CTRL1
<< 4 | 0x08, buf
, 2);
1446 dev_dbg(ds1307
->dev
, "read error %d\n", err
);
1450 /* oscillator off? turn it on, so clock can tick. */
1451 if (!(ds1307
->regs
[1] & RX8025_BIT_XST
)) {
1452 ds1307
->regs
[1] |= RX8025_BIT_XST
;
1453 regmap_write(ds1307
->regmap
,
1454 RX8025_REG_CTRL2
<< 4 | 0x08,
1456 dev_warn(ds1307
->dev
,
1457 "oscillator stop detected - SET TIME!\n");
1460 if (ds1307
->regs
[1] & RX8025_BIT_PON
) {
1461 ds1307
->regs
[1] &= ~RX8025_BIT_PON
;
1462 regmap_write(ds1307
->regmap
,
1463 RX8025_REG_CTRL2
<< 4 | 0x08,
1465 dev_warn(ds1307
->dev
, "power-on detected\n");
1468 if (ds1307
->regs
[1] & RX8025_BIT_VDET
) {
1469 ds1307
->regs
[1] &= ~RX8025_BIT_VDET
;
1470 regmap_write(ds1307
->regmap
,
1471 RX8025_REG_CTRL2
<< 4 | 0x08,
1473 dev_warn(ds1307
->dev
, "voltage drop detected\n");
1476 /* make sure we are running in 24hour mode */
1477 if (!(ds1307
->regs
[0] & RX8025_BIT_2412
)) {
1480 /* switch to 24 hour mode */
1481 regmap_write(ds1307
->regmap
,
1482 RX8025_REG_CTRL1
<< 4 | 0x08,
1483 ds1307
->regs
[0] | RX8025_BIT_2412
);
1485 err
= regmap_bulk_read(ds1307
->regmap
,
1486 RX8025_REG_CTRL1
<< 4 | 0x08,
1489 dev_dbg(ds1307
->dev
, "read error %d\n", err
);
1494 hour
= bcd2bin(ds1307
->regs
[DS1307_REG_HOUR
]);
1497 if (ds1307
->regs
[DS1307_REG_HOUR
] & DS1307_BIT_PM
)
1500 regmap_write(ds1307
->regmap
,
1501 DS1307_REG_HOUR
<< 4 | 0x08, hour
);
1505 ds1307
->offset
= 0x10; /* Seconds starts at 0x10 */
1506 rtc_ops
= &rx8130_rtc_ops
;
1507 if (chip
->alarm
&& ds1307
->irq
> 0) {
1508 irq_handler
= rx8130_irq
;
1513 ds1307
->offset
= 1; /* Seconds starts at 1 */
1516 rtc_ops
= &mcp794xx_rtc_ops
;
1517 if (chip
->alarm
&& (ds1307
->irq
> 0 ||
1518 ds1307_can_wakeup_device
)) {
1519 irq_handler
= mcp794xx_irq
;
1528 /* read RTC registers */
1529 err
= regmap_bulk_read(ds1307
->regmap
, ds1307
->offset
, buf
, 8);
1531 dev_dbg(ds1307
->dev
, "read error %d\n", err
);
1536 * minimal sanity checking; some chips (like DS1340) don't
1537 * specify the extra bits as must-be-zero, but there are
1538 * still a few values that are clearly out-of-range.
1540 tmp
= ds1307
->regs
[DS1307_REG_SECS
];
1541 switch (ds1307
->type
) {
1545 /* clock halted? turn it on, so clock can tick. */
1546 if (tmp
& DS1307_BIT_CH
) {
1547 regmap_write(ds1307
->regmap
, DS1307_REG_SECS
, 0);
1548 dev_warn(ds1307
->dev
, "SET TIME!\n");
1554 /* clock halted? turn it on, so clock can tick. */
1555 if (tmp
& DS1307_BIT_CH
)
1556 regmap_write(ds1307
->regmap
, DS1307_REG_SECS
, 0);
1558 /* oscillator fault? clear flag, and warn */
1559 if (ds1307
->regs
[DS1307_REG_CONTROL
] & DS1338_BIT_OSF
) {
1560 regmap_write(ds1307
->regmap
, DS1307_REG_CONTROL
,
1561 ds1307
->regs
[DS1307_REG_CONTROL
] &
1563 dev_warn(ds1307
->dev
, "SET TIME!\n");
1568 /* clock halted? turn it on, so clock can tick. */
1569 if (tmp
& DS1340_BIT_nEOSC
)
1570 regmap_write(ds1307
->regmap
, DS1307_REG_SECS
, 0);
1572 err
= regmap_read(ds1307
->regmap
, DS1340_REG_FLAG
, &tmp
);
1574 dev_dbg(ds1307
->dev
, "read error %d\n", err
);
1578 /* oscillator fault? clear flag, and warn */
1579 if (tmp
& DS1340_BIT_OSF
) {
1580 regmap_write(ds1307
->regmap
, DS1340_REG_FLAG
, 0);
1581 dev_warn(ds1307
->dev
, "SET TIME!\n");
1585 /* make sure that the backup battery is enabled */
1586 if (!(ds1307
->regs
[DS1307_REG_WDAY
] & MCP794XX_BIT_VBATEN
)) {
1587 regmap_write(ds1307
->regmap
, DS1307_REG_WDAY
,
1588 ds1307
->regs
[DS1307_REG_WDAY
] |
1589 MCP794XX_BIT_VBATEN
);
1592 /* clock halted? turn it on, so clock can tick. */
1593 if (!(tmp
& MCP794XX_BIT_ST
)) {
1594 regmap_write(ds1307
->regmap
, DS1307_REG_SECS
,
1596 dev_warn(ds1307
->dev
, "SET TIME!\n");
1605 tmp
= ds1307
->regs
[DS1307_REG_HOUR
];
1606 switch (ds1307
->type
) {
1611 * NOTE: ignores century bits; fix before deploying
1612 * systems that will run through year 2100.
1618 if (!(tmp
& DS1307_BIT_12HR
))
1622 * Be sure we're in 24 hour mode. Multi-master systems
1625 tmp
= bcd2bin(tmp
& 0x1f);
1628 if (ds1307
->regs
[DS1307_REG_HOUR
] & DS1307_BIT_PM
)
1630 regmap_write(ds1307
->regmap
, ds1307
->offset
+ DS1307_REG_HOUR
,
1635 * Some IPs have weekday reset value = 0x1 which might not correct
1636 * hence compute the wday using the current date/month/year values
1638 ds1307_get_time(ds1307
->dev
, &tm
);
1640 timestamp
= rtc_tm_to_time64(&tm
);
1641 rtc_time64_to_tm(timestamp
, &tm
);
1644 * Check if reset wday is different from the computed wday
1645 * If different then set the wday which we computed using
1648 if (wday
!= tm
.tm_wday
)
1649 regmap_update_bits(ds1307
->regmap
, MCP794XX_REG_WEEKDAY
,
1650 MCP794XX_REG_WEEKDAY_WDAY_MASK
,
1654 device_set_wakeup_capable(ds1307
->dev
, true);
1655 set_bit(HAS_ALARM
, &ds1307
->flags
);
1658 ds1307
->rtc
= devm_rtc_allocate_device(ds1307
->dev
);
1659 if (IS_ERR(ds1307
->rtc
)) {
1660 return PTR_ERR(ds1307
->rtc
);
1663 if (ds1307_can_wakeup_device
&& ds1307
->irq
<= 0) {
1664 /* Disable request for an IRQ */
1666 dev_info(ds1307
->dev
,
1667 "'wakeup-source' is set, request for an IRQ is disabled!\n");
1668 /* We cannot support UIE mode if we do not have an IRQ line */
1669 ds1307
->rtc
->uie_unsupported
= 1;
1673 err
= devm_request_threaded_irq(ds1307
->dev
,
1674 ds1307
->irq
, NULL
, irq_handler
,
1675 IRQF_SHARED
| IRQF_ONESHOT
,
1676 ds1307
->name
, ds1307
);
1679 device_set_wakeup_capable(ds1307
->dev
, false);
1680 clear_bit(HAS_ALARM
, &ds1307
->flags
);
1681 dev_err(ds1307
->dev
, "unable to request IRQ!\n");
1683 dev_dbg(ds1307
->dev
, "got IRQ %d\n", client
->irq
);
1686 if (chip
->nvram_size
) {
1687 ds1307
->nvmem_cfg
.name
= "ds1307_nvram";
1688 ds1307
->nvmem_cfg
.word_size
= 1;
1689 ds1307
->nvmem_cfg
.stride
= 1;
1690 ds1307
->nvmem_cfg
.size
= chip
->nvram_size
;
1691 ds1307
->nvmem_cfg
.reg_read
= ds1307_nvram_read
;
1692 ds1307
->nvmem_cfg
.reg_write
= ds1307_nvram_write
;
1693 ds1307
->nvmem_cfg
.priv
= ds1307
;
1694 ds1307
->nvram_offset
= chip
->nvram_offset
;
1696 ds1307
->rtc
->nvmem_config
= &ds1307
->nvmem_cfg
;
1697 ds1307
->rtc
->nvram_old_abi
= true;
1700 ds1307
->rtc
->ops
= rtc_ops
;
1701 err
= rtc_register_device(ds1307
->rtc
);
1705 ds1307_hwmon_register(ds1307
);
1706 ds1307_clks_register(ds1307
);
1714 static struct i2c_driver ds1307_driver
= {
1716 .name
= "rtc-ds1307",
1717 .of_match_table
= of_match_ptr(ds1307_of_match
),
1718 .acpi_match_table
= ACPI_PTR(ds1307_acpi_ids
),
1720 .probe
= ds1307_probe
,
1721 .id_table
= ds1307_id
,
1724 module_i2c_driver(ds1307_driver
);
1726 MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1727 MODULE_LICENSE("GPL");