Linux 3.11-rc3
[cris-mirror.git] / arch / arm / common / locomo.c
blobb55c3625d7ee2befcbbfff8caa6ca0ed078f92ea
1 /*
2 * linux/arch/arm/common/locomo.c
4 * Sharp LoCoMo support
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This file contains all generic LoCoMo support.
12 * All initialization functions provided here are intended to be called
13 * from machine specific code with proper arguments when required.
15 * Based on sa1111.c
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/errno.h>
23 #include <linux/ioport.h>
24 #include <linux/platform_device.h>
25 #include <linux/slab.h>
26 #include <linux/spinlock.h>
27 #include <linux/io.h>
29 #include <mach/hardware.h>
30 #include <asm/irq.h>
31 #include <asm/mach/irq.h>
33 #include <asm/hardware/locomo.h>
35 /* LoCoMo Interrupts */
36 #define IRQ_LOCOMO_KEY (0)
37 #define IRQ_LOCOMO_GPIO (1)
38 #define IRQ_LOCOMO_LT (2)
39 #define IRQ_LOCOMO_SPI (3)
41 /* M62332 output channel selection */
42 #define M62332_EVR_CH 1 /* M62332 volume channel number */
43 /* 0 : CH.1 , 1 : CH. 2 */
44 /* DAC send data */
45 #define M62332_SLAVE_ADDR 0x4e /* Slave address */
46 #define M62332_W_BIT 0x00 /* W bit (0 only) */
47 #define M62332_SUB_ADDR 0x00 /* Sub address */
48 #define M62332_A_BIT 0x00 /* A bit (0 only) */
50 /* DAC setup and hold times (expressed in us) */
51 #define DAC_BUS_FREE_TIME 5 /* 4.7 us */
52 #define DAC_START_SETUP_TIME 5 /* 4.7 us */
53 #define DAC_STOP_SETUP_TIME 4 /* 4.0 us */
54 #define DAC_START_HOLD_TIME 5 /* 4.7 us */
55 #define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */
56 #define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */
57 #define DAC_DATA_SETUP_TIME 1 /* 250 ns */
58 #define DAC_DATA_HOLD_TIME 1 /* 300 ns */
59 #define DAC_LOW_SETUP_TIME 1 /* 300 ns */
60 #define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */
62 /* the following is the overall data for the locomo chip */
63 struct locomo {
64 struct device *dev;
65 unsigned long phys;
66 unsigned int irq;
67 int irq_base;
68 spinlock_t lock;
69 void __iomem *base;
70 #ifdef CONFIG_PM
71 void *saved_state;
72 #endif
75 struct locomo_dev_info {
76 unsigned long offset;
77 unsigned long length;
78 unsigned int devid;
79 unsigned int irq[1];
80 const char * name;
83 /* All the locomo devices. If offset is non-zero, the mapbase for the
84 * locomo_dev will be set to the chip base plus offset. If offset is
85 * zero, then the mapbase for the locomo_dev will be set to zero. An
86 * offset of zero means the device only uses GPIOs or other helper
87 * functions inside this file */
88 static struct locomo_dev_info locomo_devices[] = {
90 .devid = LOCOMO_DEVID_KEYBOARD,
91 .irq = { IRQ_LOCOMO_KEY },
92 .name = "locomo-keyboard",
93 .offset = LOCOMO_KEYBOARD,
94 .length = 16,
97 .devid = LOCOMO_DEVID_FRONTLIGHT,
98 .irq = {},
99 .name = "locomo-frontlight",
100 .offset = LOCOMO_FRONTLIGHT,
101 .length = 8,
105 .devid = LOCOMO_DEVID_BACKLIGHT,
106 .irq = {},
107 .name = "locomo-backlight",
108 .offset = LOCOMO_BACKLIGHT,
109 .length = 8,
112 .devid = LOCOMO_DEVID_AUDIO,
113 .irq = {},
114 .name = "locomo-audio",
115 .offset = LOCOMO_AUDIO,
116 .length = 4,
119 .devid = LOCOMO_DEVID_LED,
120 .irq = {},
121 .name = "locomo-led",
122 .offset = LOCOMO_LED,
123 .length = 8,
126 .devid = LOCOMO_DEVID_UART,
127 .irq = {},
128 .name = "locomo-uart",
129 .offset = 0,
130 .length = 0,
133 .devid = LOCOMO_DEVID_SPI,
134 .irq = {},
135 .name = "locomo-spi",
136 .offset = LOCOMO_SPI,
137 .length = 0x30,
141 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
143 struct locomo *lchip = irq_get_chip_data(irq);
144 int req, i;
146 /* Acknowledge the parent IRQ */
147 desc->irq_data.chip->irq_ack(&desc->irq_data);
149 /* check why this interrupt was generated */
150 req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
152 if (req) {
153 /* generate the next interrupt(s) */
154 irq = lchip->irq_base;
155 for (i = 0; i <= 3; i++, irq++) {
156 if (req & (0x0100 << i)) {
157 generic_handle_irq(irq);
164 static void locomo_ack_irq(struct irq_data *d)
168 static void locomo_mask_irq(struct irq_data *d)
170 struct locomo *lchip = irq_data_get_irq_chip_data(d);
171 unsigned int r;
172 r = locomo_readl(lchip->base + LOCOMO_ICR);
173 r &= ~(0x0010 << (d->irq - lchip->irq_base));
174 locomo_writel(r, lchip->base + LOCOMO_ICR);
177 static void locomo_unmask_irq(struct irq_data *d)
179 struct locomo *lchip = irq_data_get_irq_chip_data(d);
180 unsigned int r;
181 r = locomo_readl(lchip->base + LOCOMO_ICR);
182 r |= (0x0010 << (d->irq - lchip->irq_base));
183 locomo_writel(r, lchip->base + LOCOMO_ICR);
186 static struct irq_chip locomo_chip = {
187 .name = "LOCOMO",
188 .irq_ack = locomo_ack_irq,
189 .irq_mask = locomo_mask_irq,
190 .irq_unmask = locomo_unmask_irq,
193 static void locomo_setup_irq(struct locomo *lchip)
195 int irq = lchip->irq_base;
198 * Install handler for IRQ_LOCOMO_HW.
200 irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
201 irq_set_chip_data(lchip->irq, lchip);
202 irq_set_chained_handler(lchip->irq, locomo_handler);
204 /* Install handlers for IRQ_LOCOMO_* */
205 for ( ; irq <= lchip->irq_base + 3; irq++) {
206 irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
207 irq_set_chip_data(irq, lchip);
208 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
213 static void locomo_dev_release(struct device *_dev)
215 struct locomo_dev *dev = LOCOMO_DEV(_dev);
217 kfree(dev);
220 static int
221 locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
223 struct locomo_dev *dev;
224 int ret;
226 dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
227 if (!dev) {
228 ret = -ENOMEM;
229 goto out;
233 * If the parent device has a DMA mask associated with it,
234 * propagate it down to the children.
236 if (lchip->dev->dma_mask) {
237 dev->dma_mask = *lchip->dev->dma_mask;
238 dev->dev.dma_mask = &dev->dma_mask;
241 dev_set_name(&dev->dev, "%s", info->name);
242 dev->devid = info->devid;
243 dev->dev.parent = lchip->dev;
244 dev->dev.bus = &locomo_bus_type;
245 dev->dev.release = locomo_dev_release;
246 dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask;
248 if (info->offset)
249 dev->mapbase = lchip->base + info->offset;
250 else
251 dev->mapbase = 0;
252 dev->length = info->length;
254 dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
255 NO_IRQ : lchip->irq_base + info->irq[0];
257 ret = device_register(&dev->dev);
258 if (ret) {
259 out:
260 kfree(dev);
262 return ret;
265 #ifdef CONFIG_PM
267 struct locomo_save_data {
268 u16 LCM_GPO;
269 u16 LCM_SPICT;
270 u16 LCM_GPE;
271 u16 LCM_ASD;
272 u16 LCM_SPIMD;
275 static int locomo_suspend(struct platform_device *dev, pm_message_t state)
277 struct locomo *lchip = platform_get_drvdata(dev);
278 struct locomo_save_data *save;
279 unsigned long flags;
281 save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
282 if (!save)
283 return -ENOMEM;
285 lchip->saved_state = save;
287 spin_lock_irqsave(&lchip->lock, flags);
289 save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
290 locomo_writel(0x00, lchip->base + LOCOMO_GPO);
291 save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
292 locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
293 save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
294 locomo_writel(0x00, lchip->base + LOCOMO_GPE);
295 save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
296 locomo_writel(0x00, lchip->base + LOCOMO_ASD);
297 save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
298 locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
300 locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
301 locomo_writel(0x00, lchip->base + LOCOMO_DAC);
302 locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
304 if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
305 locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
306 else
307 /* 18MHz already enabled, so no wait */
308 locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */
310 locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/
311 locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */
312 locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */
314 spin_unlock_irqrestore(&lchip->lock, flags);
316 return 0;
319 static int locomo_resume(struct platform_device *dev)
321 struct locomo *lchip = platform_get_drvdata(dev);
322 struct locomo_save_data *save;
323 unsigned long r;
324 unsigned long flags;
326 save = lchip->saved_state;
327 if (!save)
328 return 0;
330 spin_lock_irqsave(&lchip->lock, flags);
332 locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
333 locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
334 locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
335 locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
336 locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
338 locomo_writel(0x00, lchip->base + LOCOMO_C32K);
339 locomo_writel(0x90, lchip->base + LOCOMO_TADC);
341 locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC);
342 r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
343 r &= 0xFEFF;
344 locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
345 locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
347 spin_unlock_irqrestore(&lchip->lock, flags);
349 lchip->saved_state = NULL;
350 kfree(save);
352 return 0;
354 #endif
358 * locomo_probe - probe for a single LoCoMo chip.
359 * @phys_addr: physical address of device.
361 * Probe for a LoCoMo chip. This must be called
362 * before any other locomo-specific code.
364 * Returns:
365 * %-ENODEV device not found.
366 * %-EBUSY physical address already marked in-use.
367 * %0 successful.
369 static int
370 __locomo_probe(struct device *me, struct resource *mem, int irq)
372 struct locomo_platform_data *pdata = me->platform_data;
373 struct locomo *lchip;
374 unsigned long r;
375 int i, ret = -ENODEV;
377 lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
378 if (!lchip)
379 return -ENOMEM;
381 spin_lock_init(&lchip->lock);
383 lchip->dev = me;
384 dev_set_drvdata(lchip->dev, lchip);
386 lchip->phys = mem->start;
387 lchip->irq = irq;
388 lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
391 * Map the whole region. This also maps the
392 * registers for our children.
394 lchip->base = ioremap(mem->start, PAGE_SIZE);
395 if (!lchip->base) {
396 ret = -ENOMEM;
397 goto out;
400 /* locomo initialize */
401 locomo_writel(0, lchip->base + LOCOMO_ICR);
402 /* KEYBOARD */
403 locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
405 /* GPIO */
406 locomo_writel(0, lchip->base + LOCOMO_GPO);
407 locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
408 , lchip->base + LOCOMO_GPE);
409 locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
410 , lchip->base + LOCOMO_GPD);
411 locomo_writel(0, lchip->base + LOCOMO_GIE);
413 /* Frontlight */
414 locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
415 locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
417 /* Longtime timer */
418 locomo_writel(0, lchip->base + LOCOMO_LTINT);
419 /* SPI */
420 locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
422 locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
423 r = locomo_readl(lchip->base + LOCOMO_ASD);
424 r |= 0x8000;
425 locomo_writel(r, lchip->base + LOCOMO_ASD);
427 locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD);
428 r = locomo_readl(lchip->base + LOCOMO_HSD);
429 r |= 0x8000;
430 locomo_writel(r, lchip->base + LOCOMO_HSD);
432 locomo_writel(128 / 8, lchip->base + LOCOMO_HSC);
434 /* XON */
435 locomo_writel(0x80, lchip->base + LOCOMO_TADC);
436 udelay(1000);
437 /* CLK9MEN */
438 r = locomo_readl(lchip->base + LOCOMO_TADC);
439 r |= 0x10;
440 locomo_writel(r, lchip->base + LOCOMO_TADC);
441 udelay(100);
443 /* init DAC */
444 r = locomo_readl(lchip->base + LOCOMO_DAC);
445 r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
446 locomo_writel(r, lchip->base + LOCOMO_DAC);
448 r = locomo_readl(lchip->base + LOCOMO_VER);
449 printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff));
452 * The interrupt controller must be initialised before any
453 * other device to ensure that the interrupts are available.
455 if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
456 locomo_setup_irq(lchip);
458 for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
459 locomo_init_one_child(lchip, &locomo_devices[i]);
460 return 0;
462 out:
463 kfree(lchip);
464 return ret;
467 static int locomo_remove_child(struct device *dev, void *data)
469 device_unregister(dev);
470 return 0;
473 static void __locomo_remove(struct locomo *lchip)
475 device_for_each_child(lchip->dev, NULL, locomo_remove_child);
477 if (lchip->irq != NO_IRQ) {
478 irq_set_chained_handler(lchip->irq, NULL);
479 irq_set_handler_data(lchip->irq, NULL);
482 iounmap(lchip->base);
483 kfree(lchip);
486 static int locomo_probe(struct platform_device *dev)
488 struct resource *mem;
489 int irq;
491 mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
492 if (!mem)
493 return -EINVAL;
494 irq = platform_get_irq(dev, 0);
495 if (irq < 0)
496 return -ENXIO;
498 return __locomo_probe(&dev->dev, mem, irq);
501 static int locomo_remove(struct platform_device *dev)
503 struct locomo *lchip = platform_get_drvdata(dev);
505 if (lchip) {
506 __locomo_remove(lchip);
507 platform_set_drvdata(dev, NULL);
510 return 0;
514 * Not sure if this should be on the system bus or not yet.
515 * We really want some way to register a system device at
516 * the per-machine level, and then have this driver pick
517 * up the registered devices.
519 static struct platform_driver locomo_device_driver = {
520 .probe = locomo_probe,
521 .remove = locomo_remove,
522 #ifdef CONFIG_PM
523 .suspend = locomo_suspend,
524 .resume = locomo_resume,
525 #endif
526 .driver = {
527 .name = "locomo",
532 * Get the parent device driver (us) structure
533 * from a child function device
535 static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
537 return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
540 void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
542 struct locomo *lchip = dev_get_drvdata(dev);
543 unsigned long flags;
544 unsigned int r;
546 if (!lchip)
547 return;
549 spin_lock_irqsave(&lchip->lock, flags);
551 r = locomo_readl(lchip->base + LOCOMO_GPD);
552 if (dir)
553 r |= bits;
554 else
555 r &= ~bits;
556 locomo_writel(r, lchip->base + LOCOMO_GPD);
558 r = locomo_readl(lchip->base + LOCOMO_GPE);
559 if (dir)
560 r |= bits;
561 else
562 r &= ~bits;
563 locomo_writel(r, lchip->base + LOCOMO_GPE);
565 spin_unlock_irqrestore(&lchip->lock, flags);
567 EXPORT_SYMBOL(locomo_gpio_set_dir);
569 int locomo_gpio_read_level(struct device *dev, unsigned int bits)
571 struct locomo *lchip = dev_get_drvdata(dev);
572 unsigned long flags;
573 unsigned int ret;
575 if (!lchip)
576 return -ENODEV;
578 spin_lock_irqsave(&lchip->lock, flags);
579 ret = locomo_readl(lchip->base + LOCOMO_GPL);
580 spin_unlock_irqrestore(&lchip->lock, flags);
582 ret &= bits;
583 return ret;
585 EXPORT_SYMBOL(locomo_gpio_read_level);
587 int locomo_gpio_read_output(struct device *dev, unsigned int bits)
589 struct locomo *lchip = dev_get_drvdata(dev);
590 unsigned long flags;
591 unsigned int ret;
593 if (!lchip)
594 return -ENODEV;
596 spin_lock_irqsave(&lchip->lock, flags);
597 ret = locomo_readl(lchip->base + LOCOMO_GPO);
598 spin_unlock_irqrestore(&lchip->lock, flags);
600 ret &= bits;
601 return ret;
603 EXPORT_SYMBOL(locomo_gpio_read_output);
605 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
607 struct locomo *lchip = dev_get_drvdata(dev);
608 unsigned long flags;
609 unsigned int r;
611 if (!lchip)
612 return;
614 spin_lock_irqsave(&lchip->lock, flags);
616 r = locomo_readl(lchip->base + LOCOMO_GPO);
617 if (set)
618 r |= bits;
619 else
620 r &= ~bits;
621 locomo_writel(r, lchip->base + LOCOMO_GPO);
623 spin_unlock_irqrestore(&lchip->lock, flags);
625 EXPORT_SYMBOL(locomo_gpio_write);
627 static void locomo_m62332_sendbit(void *mapbase, int bit)
629 unsigned int r;
631 r = locomo_readl(mapbase + LOCOMO_DAC);
632 r &= ~(LOCOMO_DAC_SCLOEB);
633 locomo_writel(r, mapbase + LOCOMO_DAC);
634 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
635 udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
636 r = locomo_readl(mapbase + LOCOMO_DAC);
637 r &= ~(LOCOMO_DAC_SCLOEB);
638 locomo_writel(r, mapbase + LOCOMO_DAC);
639 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
640 udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
642 if (bit & 1) {
643 r = locomo_readl(mapbase + LOCOMO_DAC);
644 r |= LOCOMO_DAC_SDAOEB;
645 locomo_writel(r, mapbase + LOCOMO_DAC);
646 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
647 } else {
648 r = locomo_readl(mapbase + LOCOMO_DAC);
649 r &= ~(LOCOMO_DAC_SDAOEB);
650 locomo_writel(r, mapbase + LOCOMO_DAC);
651 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
654 udelay(DAC_DATA_SETUP_TIME); /* 250 nsec */
655 r = locomo_readl(mapbase + LOCOMO_DAC);
656 r |= LOCOMO_DAC_SCLOEB;
657 locomo_writel(r, mapbase + LOCOMO_DAC);
658 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
659 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */
662 void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel)
664 struct locomo *lchip = locomo_chip_driver(ldev);
665 int i;
666 unsigned char data;
667 unsigned int r;
668 void *mapbase = lchip->base;
669 unsigned long flags;
671 spin_lock_irqsave(&lchip->lock, flags);
673 /* Start */
674 udelay(DAC_BUS_FREE_TIME); /* 5.0 usec */
675 r = locomo_readl(mapbase + LOCOMO_DAC);
676 r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
677 locomo_writel(r, mapbase + LOCOMO_DAC);
678 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
679 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */
680 r = locomo_readl(mapbase + LOCOMO_DAC);
681 r &= ~(LOCOMO_DAC_SDAOEB);
682 locomo_writel(r, mapbase + LOCOMO_DAC);
683 udelay(DAC_START_HOLD_TIME); /* 5.0 usec */
684 udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
686 /* Send slave address and W bit (LSB is W bit) */
687 data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT;
688 for (i = 1; i <= 8; i++) {
689 locomo_m62332_sendbit(mapbase, data >> (8 - i));
692 /* Check A bit */
693 r = locomo_readl(mapbase + LOCOMO_DAC);
694 r &= ~(LOCOMO_DAC_SCLOEB);
695 locomo_writel(r, mapbase + LOCOMO_DAC);
696 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
697 udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
698 r = locomo_readl(mapbase + LOCOMO_DAC);
699 r &= ~(LOCOMO_DAC_SDAOEB);
700 locomo_writel(r, mapbase + LOCOMO_DAC);
701 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
702 r = locomo_readl(mapbase + LOCOMO_DAC);
703 r |= LOCOMO_DAC_SCLOEB;
704 locomo_writel(r, mapbase + LOCOMO_DAC);
705 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
706 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
707 if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
708 printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
709 goto out;
712 /* Send Sub address (LSB is channel select) */
713 /* channel = 0 : ch1 select */
714 /* = 1 : ch2 select */
715 data = M62332_SUB_ADDR + channel;
716 for (i = 1; i <= 8; i++) {
717 locomo_m62332_sendbit(mapbase, data >> (8 - i));
720 /* Check A bit */
721 r = locomo_readl(mapbase + LOCOMO_DAC);
722 r &= ~(LOCOMO_DAC_SCLOEB);
723 locomo_writel(r, mapbase + LOCOMO_DAC);
724 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
725 udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
726 r = locomo_readl(mapbase + LOCOMO_DAC);
727 r &= ~(LOCOMO_DAC_SDAOEB);
728 locomo_writel(r, mapbase + LOCOMO_DAC);
729 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
730 r = locomo_readl(mapbase + LOCOMO_DAC);
731 r |= LOCOMO_DAC_SCLOEB;
732 locomo_writel(r, mapbase + LOCOMO_DAC);
733 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
734 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
735 if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
736 printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
737 goto out;
740 /* Send DAC data */
741 for (i = 1; i <= 8; i++) {
742 locomo_m62332_sendbit(mapbase, dac_data >> (8 - i));
745 /* Check A bit */
746 r = locomo_readl(mapbase + LOCOMO_DAC);
747 r &= ~(LOCOMO_DAC_SCLOEB);
748 locomo_writel(r, mapbase + LOCOMO_DAC);
749 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
750 udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
751 r = locomo_readl(mapbase + LOCOMO_DAC);
752 r &= ~(LOCOMO_DAC_SDAOEB);
753 locomo_writel(r, mapbase + LOCOMO_DAC);
754 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
755 r = locomo_readl(mapbase + LOCOMO_DAC);
756 r |= LOCOMO_DAC_SCLOEB;
757 locomo_writel(r, mapbase + LOCOMO_DAC);
758 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
759 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
760 if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
761 printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
764 out:
765 /* stop */
766 r = locomo_readl(mapbase + LOCOMO_DAC);
767 r &= ~(LOCOMO_DAC_SCLOEB);
768 locomo_writel(r, mapbase + LOCOMO_DAC);
769 udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
770 udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
771 r = locomo_readl(mapbase + LOCOMO_DAC);
772 r |= LOCOMO_DAC_SCLOEB;
773 locomo_writel(r, mapbase + LOCOMO_DAC);
774 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
775 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */
776 r = locomo_readl(mapbase + LOCOMO_DAC);
777 r |= LOCOMO_DAC_SDAOEB;
778 locomo_writel(r, mapbase + LOCOMO_DAC);
779 udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
780 udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */
782 r = locomo_readl(mapbase + LOCOMO_DAC);
783 r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
784 locomo_writel(r, mapbase + LOCOMO_DAC);
785 udelay(DAC_LOW_SETUP_TIME); /* 1000 nsec */
786 udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
788 spin_unlock_irqrestore(&lchip->lock, flags);
790 EXPORT_SYMBOL(locomo_m62332_senddata);
793 * Frontlight control
796 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
798 unsigned long flags;
799 struct locomo *lchip = locomo_chip_driver(dev);
801 if (vr)
802 locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
803 else
804 locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
806 spin_lock_irqsave(&lchip->lock, flags);
807 locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
808 udelay(100);
809 locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
810 locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
811 spin_unlock_irqrestore(&lchip->lock, flags);
813 EXPORT_SYMBOL(locomo_frontlight_set);
816 * LoCoMo "Register Access Bus."
818 * We model this as a regular bus type, and hang devices directly
819 * off this.
821 static int locomo_match(struct device *_dev, struct device_driver *_drv)
823 struct locomo_dev *dev = LOCOMO_DEV(_dev);
824 struct locomo_driver *drv = LOCOMO_DRV(_drv);
826 return dev->devid == drv->devid;
829 static int locomo_bus_suspend(struct device *dev, pm_message_t state)
831 struct locomo_dev *ldev = LOCOMO_DEV(dev);
832 struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
833 int ret = 0;
835 if (drv && drv->suspend)
836 ret = drv->suspend(ldev, state);
837 return ret;
840 static int locomo_bus_resume(struct device *dev)
842 struct locomo_dev *ldev = LOCOMO_DEV(dev);
843 struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
844 int ret = 0;
846 if (drv && drv->resume)
847 ret = drv->resume(ldev);
848 return ret;
851 static int locomo_bus_probe(struct device *dev)
853 struct locomo_dev *ldev = LOCOMO_DEV(dev);
854 struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
855 int ret = -ENODEV;
857 if (drv->probe)
858 ret = drv->probe(ldev);
859 return ret;
862 static int locomo_bus_remove(struct device *dev)
864 struct locomo_dev *ldev = LOCOMO_DEV(dev);
865 struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
866 int ret = 0;
868 if (drv->remove)
869 ret = drv->remove(ldev);
870 return ret;
873 struct bus_type locomo_bus_type = {
874 .name = "locomo-bus",
875 .match = locomo_match,
876 .probe = locomo_bus_probe,
877 .remove = locomo_bus_remove,
878 .suspend = locomo_bus_suspend,
879 .resume = locomo_bus_resume,
882 int locomo_driver_register(struct locomo_driver *driver)
884 driver->drv.bus = &locomo_bus_type;
885 return driver_register(&driver->drv);
887 EXPORT_SYMBOL(locomo_driver_register);
889 void locomo_driver_unregister(struct locomo_driver *driver)
891 driver_unregister(&driver->drv);
893 EXPORT_SYMBOL(locomo_driver_unregister);
895 static int __init locomo_init(void)
897 int ret = bus_register(&locomo_bus_type);
898 if (ret == 0)
899 platform_driver_register(&locomo_device_driver);
900 return ret;
903 static void __exit locomo_exit(void)
905 platform_driver_unregister(&locomo_device_driver);
906 bus_unregister(&locomo_bus_type);
909 module_init(locomo_init);
910 module_exit(locomo_exit);
912 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
913 MODULE_LICENSE("GPL");
914 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");