arch/x86/include/asm/mach_timer.h

   1 /*
   2  *  Machine specific calibrate_tsc() for generic.
   3  *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
   4  */
   5 /* ------ Calibrate the TSC -------
   6  * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
   7  * Too much 64-bit arithmetic here to do this cleanly in C, and for
   8  * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
   9  * output busy loop as low as possible. We avoid reading the CTC registers
  10  * directly because of the awkward 8-bit access mechanism of the 82C54
  11  * device.
  12  */
  13 #ifndef _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
  14 #define _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
  15
  16 #define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
  17 #define CALIBRATE_LATCH \
  18         ((PIT_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
  19
  20 static inline void mach_prepare_counter(void)
  21 {
  22        /* Set the Gate high, disable speaker */
  23         outb((inb(0x61) & ~0x02) | 0x01, 0x61);
  24
  25         /*
  26          * Now let's take care of CTC channel 2
  27          *
  28          * Set the Gate high, program CTC channel 2 for mode 0,
  29          * (interrupt on terminal count mode), binary count,
  30          * load 5 * LATCH count, (LSB and MSB) to begin countdown.
  31          *
  32          * Some devices need a delay here.
  33          */
  34         outb(0xb0, 0x43);                       /* binary, mode 0, LSB/MSB, Ch 2 */
  35         outb_p(CALIBRATE_LATCH & 0xff, 0x42);   /* LSB of count */
  36         outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
  37 }
  38
  39 static inline void mach_countup(unsigned long *count_p)
  40 {
  41         unsigned long count = 0;
  42         do {
  43                 count++;
  44         } while ((inb_p(0x61) & 0x20) == 0);
  45         *count_p = count;
  46 }
  47
  48 #endif /* _ASM_X86_MACH_DEFAULT_MACH_TIMER_H */