Linux 3.11-rc3
[cris-mirror.git] / drivers / leds / leds-lt3593.c
blobca48a7d5502d35fb919de639a4ddb067b6f80baf
1 /*
2 * LEDs driver for LT3593 controllers
4 * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf
6 * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
8 * Based on leds-gpio.c,
10 * Copyright (C) 2007 8D Technologies inc.
11 * Raphael Assenat <raph@8d.com>
12 * Copyright (C) 2008 Freescale Semiconductor, Inc.
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/platform_device.h>
22 #include <linux/leds.h>
23 #include <linux/workqueue.h>
24 #include <linux/delay.h>
25 #include <linux/gpio.h>
26 #include <linux/slab.h>
27 #include <linux/module.h>
29 struct lt3593_led_data {
30 struct led_classdev cdev;
31 unsigned gpio;
32 struct work_struct work;
33 u8 new_level;
36 static void lt3593_led_work(struct work_struct *work)
38 int pulses;
39 struct lt3593_led_data *led_dat =
40 container_of(work, struct lt3593_led_data, work);
43 * The LT3593 resets its internal current level register to the maximum
44 * level on the first falling edge on the control pin. Each following
45 * falling edge decreases the current level by 625uA. Up to 32 pulses
46 * can be sent, so the maximum power reduction is 20mA.
47 * After a timeout of 128us, the value is taken from the register and
48 * applied is to the output driver.
51 if (led_dat->new_level == 0) {
52 gpio_set_value_cansleep(led_dat->gpio, 0);
53 return;
56 pulses = 32 - (led_dat->new_level * 32) / 255;
58 if (pulses == 0) {
59 gpio_set_value_cansleep(led_dat->gpio, 0);
60 mdelay(1);
61 gpio_set_value_cansleep(led_dat->gpio, 1);
62 return;
65 gpio_set_value_cansleep(led_dat->gpio, 1);
67 while (pulses--) {
68 gpio_set_value_cansleep(led_dat->gpio, 0);
69 udelay(1);
70 gpio_set_value_cansleep(led_dat->gpio, 1);
71 udelay(1);
75 static void lt3593_led_set(struct led_classdev *led_cdev,
76 enum led_brightness value)
78 struct lt3593_led_data *led_dat =
79 container_of(led_cdev, struct lt3593_led_data, cdev);
81 led_dat->new_level = value;
82 schedule_work(&led_dat->work);
85 static int create_lt3593_led(const struct gpio_led *template,
86 struct lt3593_led_data *led_dat, struct device *parent)
88 int ret, state;
90 /* skip leds on GPIOs that aren't available */
91 if (!gpio_is_valid(template->gpio)) {
92 dev_info(parent, "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n",
93 KBUILD_MODNAME, template->gpio, template->name);
94 return 0;
97 led_dat->cdev.name = template->name;
98 led_dat->cdev.default_trigger = template->default_trigger;
99 led_dat->gpio = template->gpio;
101 led_dat->cdev.brightness_set = lt3593_led_set;
103 state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
104 led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
106 if (!template->retain_state_suspended)
107 led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
109 ret = devm_gpio_request_one(parent, template->gpio, state ?
110 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
111 template->name);
112 if (ret < 0)
113 return ret;
115 INIT_WORK(&led_dat->work, lt3593_led_work);
117 ret = led_classdev_register(parent, &led_dat->cdev);
118 if (ret < 0)
119 return ret;
121 dev_info(parent, "%s: registered LT3593 LED '%s' at GPIO %d\n",
122 KBUILD_MODNAME, template->name, template->gpio);
124 return 0;
127 static void delete_lt3593_led(struct lt3593_led_data *led)
129 if (!gpio_is_valid(led->gpio))
130 return;
132 led_classdev_unregister(&led->cdev);
133 cancel_work_sync(&led->work);
136 static int lt3593_led_probe(struct platform_device *pdev)
138 struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
139 struct lt3593_led_data *leds_data;
140 int i, ret = 0;
142 if (!pdata)
143 return -EBUSY;
145 leds_data = devm_kzalloc(&pdev->dev,
146 sizeof(struct lt3593_led_data) * pdata->num_leds,
147 GFP_KERNEL);
148 if (!leds_data)
149 return -ENOMEM;
151 for (i = 0; i < pdata->num_leds; i++) {
152 ret = create_lt3593_led(&pdata->leds[i], &leds_data[i],
153 &pdev->dev);
154 if (ret < 0)
155 goto err;
158 platform_set_drvdata(pdev, leds_data);
160 return 0;
162 err:
163 for (i = i - 1; i >= 0; i--)
164 delete_lt3593_led(&leds_data[i]);
166 return ret;
169 static int lt3593_led_remove(struct platform_device *pdev)
171 int i;
172 struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
173 struct lt3593_led_data *leds_data;
175 leds_data = platform_get_drvdata(pdev);
177 for (i = 0; i < pdata->num_leds; i++)
178 delete_lt3593_led(&leds_data[i]);
180 return 0;
183 static struct platform_driver lt3593_led_driver = {
184 .probe = lt3593_led_probe,
185 .remove = lt3593_led_remove,
186 .driver = {
187 .name = "leds-lt3593",
188 .owner = THIS_MODULE,
192 module_platform_driver(lt3593_led_driver);
194 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
195 MODULE_DESCRIPTION("LED driver for LT3593 controllers");
196 MODULE_LICENSE("GPL");
197 MODULE_ALIAS("platform:leds-lt3593");