Linux 3.11-rc3
[cris-mirror.git] / drivers / mtd / nand / mpc5121_nfc.c
blob3c9cdcbc4cba7200c99db3db8366e286daf1669a
1 /*
2 * Copyright 2004-2008 Freescale Semiconductor, Inc.
3 * Copyright 2009 Semihalf.
5 * Approved as OSADL project by a majority of OSADL members and funded
6 * by OSADL membership fees in 2009; for details see www.osadl.org.
8 * Based on original driver from Freescale Semiconductor
9 * written by John Rigby <jrigby@freescale.com> on basis
10 * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
11 * Piotr Ziecik <kosmo@semihalf.com>.
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version 2
16 * of the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
25 * MA 02110-1301, USA.
28 #include <linux/module.h>
29 #include <linux/clk.h>
30 #include <linux/gfp.h>
31 #include <linux/delay.h>
32 #include <linux/err.h>
33 #include <linux/init.h>
34 #include <linux/interrupt.h>
35 #include <linux/io.h>
36 #include <linux/mtd/mtd.h>
37 #include <linux/mtd/nand.h>
38 #include <linux/mtd/partitions.h>
39 #include <linux/of_device.h>
40 #include <linux/of_platform.h>
42 #include <asm/mpc5121.h>
44 /* Addresses for NFC MAIN RAM BUFFER areas */
45 #define NFC_MAIN_AREA(n) ((n) * 0x200)
47 /* Addresses for NFC SPARE BUFFER areas */
48 #define NFC_SPARE_BUFFERS 8
49 #define NFC_SPARE_LEN 0x40
50 #define NFC_SPARE_AREA(n) (0x1000 + ((n) * NFC_SPARE_LEN))
52 /* MPC5121 NFC registers */
53 #define NFC_BUF_ADDR 0x1E04
54 #define NFC_FLASH_ADDR 0x1E06
55 #define NFC_FLASH_CMD 0x1E08
56 #define NFC_CONFIG 0x1E0A
57 #define NFC_ECC_STATUS1 0x1E0C
58 #define NFC_ECC_STATUS2 0x1E0E
59 #define NFC_SPAS 0x1E10
60 #define NFC_WRPROT 0x1E12
61 #define NFC_NF_WRPRST 0x1E18
62 #define NFC_CONFIG1 0x1E1A
63 #define NFC_CONFIG2 0x1E1C
64 #define NFC_UNLOCKSTART_BLK0 0x1E20
65 #define NFC_UNLOCKEND_BLK0 0x1E22
66 #define NFC_UNLOCKSTART_BLK1 0x1E24
67 #define NFC_UNLOCKEND_BLK1 0x1E26
68 #define NFC_UNLOCKSTART_BLK2 0x1E28
69 #define NFC_UNLOCKEND_BLK2 0x1E2A
70 #define NFC_UNLOCKSTART_BLK3 0x1E2C
71 #define NFC_UNLOCKEND_BLK3 0x1E2E
73 /* Bit Definitions: NFC_BUF_ADDR */
74 #define NFC_RBA_MASK (7 << 0)
75 #define NFC_ACTIVE_CS_SHIFT 5
76 #define NFC_ACTIVE_CS_MASK (3 << NFC_ACTIVE_CS_SHIFT)
78 /* Bit Definitions: NFC_CONFIG */
79 #define NFC_BLS_UNLOCKED (1 << 1)
81 /* Bit Definitions: NFC_CONFIG1 */
82 #define NFC_ECC_4BIT (1 << 0)
83 #define NFC_FULL_PAGE_DMA (1 << 1)
84 #define NFC_SPARE_ONLY (1 << 2)
85 #define NFC_ECC_ENABLE (1 << 3)
86 #define NFC_INT_MASK (1 << 4)
87 #define NFC_BIG_ENDIAN (1 << 5)
88 #define NFC_RESET (1 << 6)
89 #define NFC_CE (1 << 7)
90 #define NFC_ONE_CYCLE (1 << 8)
91 #define NFC_PPB_32 (0 << 9)
92 #define NFC_PPB_64 (1 << 9)
93 #define NFC_PPB_128 (2 << 9)
94 #define NFC_PPB_256 (3 << 9)
95 #define NFC_PPB_MASK (3 << 9)
96 #define NFC_FULL_PAGE_INT (1 << 11)
98 /* Bit Definitions: NFC_CONFIG2 */
99 #define NFC_COMMAND (1 << 0)
100 #define NFC_ADDRESS (1 << 1)
101 #define NFC_INPUT (1 << 2)
102 #define NFC_OUTPUT (1 << 3)
103 #define NFC_ID (1 << 4)
104 #define NFC_STATUS (1 << 5)
105 #define NFC_CMD_FAIL (1 << 15)
106 #define NFC_INT (1 << 15)
108 /* Bit Definitions: NFC_WRPROT */
109 #define NFC_WPC_LOCK_TIGHT (1 << 0)
110 #define NFC_WPC_LOCK (1 << 1)
111 #define NFC_WPC_UNLOCK (1 << 2)
113 #define DRV_NAME "mpc5121_nfc"
115 /* Timeouts */
116 #define NFC_RESET_TIMEOUT 1000 /* 1 ms */
117 #define NFC_TIMEOUT (HZ / 10) /* 1/10 s */
119 struct mpc5121_nfc_prv {
120 struct mtd_info mtd;
121 struct nand_chip chip;
122 int irq;
123 void __iomem *regs;
124 struct clk *clk;
125 wait_queue_head_t irq_waitq;
126 uint column;
127 int spareonly;
128 void __iomem *csreg;
129 struct device *dev;
132 static void mpc5121_nfc_done(struct mtd_info *mtd);
134 /* Read NFC register */
135 static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
137 struct nand_chip *chip = mtd->priv;
138 struct mpc5121_nfc_prv *prv = chip->priv;
140 return in_be16(prv->regs + reg);
143 /* Write NFC register */
144 static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
146 struct nand_chip *chip = mtd->priv;
147 struct mpc5121_nfc_prv *prv = chip->priv;
149 out_be16(prv->regs + reg, val);
152 /* Set bits in NFC register */
153 static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
155 nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
158 /* Clear bits in NFC register */
159 static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
161 nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
164 /* Invoke address cycle */
165 static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
167 nfc_write(mtd, NFC_FLASH_ADDR, addr);
168 nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
169 mpc5121_nfc_done(mtd);
172 /* Invoke command cycle */
173 static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
175 nfc_write(mtd, NFC_FLASH_CMD, cmd);
176 nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
177 mpc5121_nfc_done(mtd);
180 /* Send data from NFC buffers to NAND flash */
181 static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
183 nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
184 nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
185 mpc5121_nfc_done(mtd);
188 /* Receive data from NAND flash */
189 static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
191 nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
192 nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
193 mpc5121_nfc_done(mtd);
196 /* Receive ID from NAND flash */
197 static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
199 nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
200 nfc_write(mtd, NFC_CONFIG2, NFC_ID);
201 mpc5121_nfc_done(mtd);
204 /* Receive status from NAND flash */
205 static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
207 nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
208 nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
209 mpc5121_nfc_done(mtd);
212 /* NFC interrupt handler */
213 static irqreturn_t mpc5121_nfc_irq(int irq, void *data)
215 struct mtd_info *mtd = data;
216 struct nand_chip *chip = mtd->priv;
217 struct mpc5121_nfc_prv *prv = chip->priv;
219 nfc_set(mtd, NFC_CONFIG1, NFC_INT_MASK);
220 wake_up(&prv->irq_waitq);
222 return IRQ_HANDLED;
225 /* Wait for operation complete */
226 static void mpc5121_nfc_done(struct mtd_info *mtd)
228 struct nand_chip *chip = mtd->priv;
229 struct mpc5121_nfc_prv *prv = chip->priv;
230 int rv;
232 if ((nfc_read(mtd, NFC_CONFIG2) & NFC_INT) == 0) {
233 nfc_clear(mtd, NFC_CONFIG1, NFC_INT_MASK);
234 rv = wait_event_timeout(prv->irq_waitq,
235 (nfc_read(mtd, NFC_CONFIG2) & NFC_INT), NFC_TIMEOUT);
237 if (!rv)
238 dev_warn(prv->dev,
239 "Timeout while waiting for interrupt.\n");
242 nfc_clear(mtd, NFC_CONFIG2, NFC_INT);
245 /* Do address cycle(s) */
246 static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
248 struct nand_chip *chip = mtd->priv;
249 u32 pagemask = chip->pagemask;
251 if (column != -1) {
252 mpc5121_nfc_send_addr(mtd, column);
253 if (mtd->writesize > 512)
254 mpc5121_nfc_send_addr(mtd, column >> 8);
257 if (page != -1) {
258 do {
259 mpc5121_nfc_send_addr(mtd, page & 0xFF);
260 page >>= 8;
261 pagemask >>= 8;
262 } while (pagemask);
266 /* Control chip select signals */
267 static void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
269 if (chip < 0) {
270 nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
271 return;
274 nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
275 nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
276 NFC_ACTIVE_CS_MASK);
277 nfc_set(mtd, NFC_CONFIG1, NFC_CE);
280 /* Init external chip select logic on ADS5121 board */
281 static int ads5121_chipselect_init(struct mtd_info *mtd)
283 struct nand_chip *chip = mtd->priv;
284 struct mpc5121_nfc_prv *prv = chip->priv;
285 struct device_node *dn;
287 dn = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld");
288 if (dn) {
289 prv->csreg = of_iomap(dn, 0);
290 of_node_put(dn);
291 if (!prv->csreg)
292 return -ENOMEM;
294 /* CPLD Register 9 controls NAND /CE Lines */
295 prv->csreg += 9;
296 return 0;
299 return -EINVAL;
302 /* Control chips select signal on ADS5121 board */
303 static void ads5121_select_chip(struct mtd_info *mtd, int chip)
305 struct nand_chip *nand = mtd->priv;
306 struct mpc5121_nfc_prv *prv = nand->priv;
307 u8 v;
309 v = in_8(prv->csreg);
310 v |= 0x0F;
312 if (chip >= 0) {
313 mpc5121_nfc_select_chip(mtd, 0);
314 v &= ~(1 << chip);
315 } else
316 mpc5121_nfc_select_chip(mtd, -1);
318 out_8(prv->csreg, v);
321 /* Read NAND Ready/Busy signal */
322 static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
325 * NFC handles ready/busy signal internally. Therefore, this function
326 * always returns status as ready.
328 return 1;
331 /* Write command to NAND flash */
332 static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
333 int column, int page)
335 struct nand_chip *chip = mtd->priv;
336 struct mpc5121_nfc_prv *prv = chip->priv;
338 prv->column = (column >= 0) ? column : 0;
339 prv->spareonly = 0;
341 switch (command) {
342 case NAND_CMD_PAGEPROG:
343 mpc5121_nfc_send_prog_page(mtd);
344 break;
346 * NFC does not support sub-page reads and writes,
347 * so emulate them using full page transfers.
349 case NAND_CMD_READ0:
350 column = 0;
351 break;
353 case NAND_CMD_READ1:
354 prv->column += 256;
355 command = NAND_CMD_READ0;
356 column = 0;
357 break;
359 case NAND_CMD_READOOB:
360 prv->spareonly = 1;
361 command = NAND_CMD_READ0;
362 column = 0;
363 break;
365 case NAND_CMD_SEQIN:
366 mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
367 column = 0;
368 break;
370 case NAND_CMD_ERASE1:
371 case NAND_CMD_ERASE2:
372 case NAND_CMD_READID:
373 case NAND_CMD_STATUS:
374 break;
376 default:
377 return;
380 mpc5121_nfc_send_cmd(mtd, command);
381 mpc5121_nfc_addr_cycle(mtd, column, page);
383 switch (command) {
384 case NAND_CMD_READ0:
385 if (mtd->writesize > 512)
386 mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
387 mpc5121_nfc_send_read_page(mtd);
388 break;
390 case NAND_CMD_READID:
391 mpc5121_nfc_send_read_id(mtd);
392 break;
394 case NAND_CMD_STATUS:
395 mpc5121_nfc_send_read_status(mtd);
396 if (chip->options & NAND_BUSWIDTH_16)
397 prv->column = 1;
398 else
399 prv->column = 0;
400 break;
404 /* Copy data from/to NFC spare buffers. */
405 static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
406 u8 *buffer, uint size, int wr)
408 struct nand_chip *nand = mtd->priv;
409 struct mpc5121_nfc_prv *prv = nand->priv;
410 uint o, s, sbsize, blksize;
413 * NAND spare area is available through NFC spare buffers.
414 * The NFC divides spare area into (page_size / 512) chunks.
415 * Each chunk is placed into separate spare memory area, using
416 * first (spare_size / num_of_chunks) bytes of the buffer.
418 * For NAND device in which the spare area is not divided fully
419 * by the number of chunks, number of used bytes in each spare
420 * buffer is rounded down to the nearest even number of bytes,
421 * and all remaining bytes are added to the last used spare area.
423 * For more information read section 26.6.10 of MPC5121e
424 * Microcontroller Reference Manual, Rev. 3.
427 /* Calculate number of valid bytes in each spare buffer */
428 sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
430 while (size) {
431 /* Calculate spare buffer number */
432 s = offset / sbsize;
433 if (s > NFC_SPARE_BUFFERS - 1)
434 s = NFC_SPARE_BUFFERS - 1;
437 * Calculate offset to requested data block in selected spare
438 * buffer and its size.
440 o = offset - (s * sbsize);
441 blksize = min(sbsize - o, size);
443 if (wr)
444 memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
445 buffer, blksize);
446 else
447 memcpy_fromio(buffer,
448 prv->regs + NFC_SPARE_AREA(s) + o, blksize);
450 buffer += blksize;
451 offset += blksize;
452 size -= blksize;
456 /* Copy data from/to NFC main and spare buffers */
457 static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char *buf, int len,
458 int wr)
460 struct nand_chip *chip = mtd->priv;
461 struct mpc5121_nfc_prv *prv = chip->priv;
462 uint c = prv->column;
463 uint l;
465 /* Handle spare area access */
466 if (prv->spareonly || c >= mtd->writesize) {
467 /* Calculate offset from beginning of spare area */
468 if (c >= mtd->writesize)
469 c -= mtd->writesize;
471 prv->column += len;
472 mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
473 return;
477 * Handle main area access - limit copy length to prevent
478 * crossing main/spare boundary.
480 l = min((uint)len, mtd->writesize - c);
481 prv->column += l;
483 if (wr)
484 memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
485 else
486 memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
488 /* Handle crossing main/spare boundary */
489 if (l != len) {
490 buf += l;
491 len -= l;
492 mpc5121_nfc_buf_copy(mtd, buf, len, wr);
496 /* Read data from NFC buffers */
497 static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
499 mpc5121_nfc_buf_copy(mtd, buf, len, 0);
502 /* Write data to NFC buffers */
503 static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
504 const u_char *buf, int len)
506 mpc5121_nfc_buf_copy(mtd, (u_char *)buf, len, 1);
509 /* Read byte from NFC buffers */
510 static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
512 u8 tmp;
514 mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
516 return tmp;
519 /* Read word from NFC buffers */
520 static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
522 u16 tmp;
524 mpc5121_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
526 return tmp;
530 * Read NFC configuration from Reset Config Word
532 * NFC is configured during reset in basis of information stored
533 * in Reset Config Word. There is no other way to set NAND block
534 * size, spare size and bus width.
536 static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
538 struct nand_chip *chip = mtd->priv;
539 struct mpc5121_nfc_prv *prv = chip->priv;
540 struct mpc512x_reset_module *rm;
541 struct device_node *rmnode;
542 uint rcw_pagesize = 0;
543 uint rcw_sparesize = 0;
544 uint rcw_width;
545 uint rcwh;
546 uint romloc, ps;
547 int ret = 0;
549 rmnode = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
550 if (!rmnode) {
551 dev_err(prv->dev, "Missing 'fsl,mpc5121-reset' "
552 "node in device tree!\n");
553 return -ENODEV;
556 rm = of_iomap(rmnode, 0);
557 if (!rm) {
558 dev_err(prv->dev, "Error mapping reset module node!\n");
559 ret = -EBUSY;
560 goto out;
563 rcwh = in_be32(&rm->rcwhr);
565 /* Bit 6: NFC bus width */
566 rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
568 /* Bit 7: NFC Page/Spare size */
569 ps = (rcwh >> 7) & 0x1;
571 /* Bits [22:21]: ROM Location */
572 romloc = (rcwh >> 21) & 0x3;
574 /* Decode RCW bits */
575 switch ((ps << 2) | romloc) {
576 case 0x00:
577 case 0x01:
578 rcw_pagesize = 512;
579 rcw_sparesize = 16;
580 break;
581 case 0x02:
582 case 0x03:
583 rcw_pagesize = 4096;
584 rcw_sparesize = 128;
585 break;
586 case 0x04:
587 case 0x05:
588 rcw_pagesize = 2048;
589 rcw_sparesize = 64;
590 break;
591 case 0x06:
592 case 0x07:
593 rcw_pagesize = 4096;
594 rcw_sparesize = 218;
595 break;
598 mtd->writesize = rcw_pagesize;
599 mtd->oobsize = rcw_sparesize;
600 if (rcw_width == 2)
601 chip->options |= NAND_BUSWIDTH_16;
603 dev_notice(prv->dev, "Configured for "
604 "%u-bit NAND, page size %u "
605 "with %u spare.\n",
606 rcw_width * 8, rcw_pagesize,
607 rcw_sparesize);
608 iounmap(rm);
609 out:
610 of_node_put(rmnode);
611 return ret;
614 /* Free driver resources */
615 static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
617 struct nand_chip *chip = mtd->priv;
618 struct mpc5121_nfc_prv *prv = chip->priv;
620 if (prv->clk) {
621 clk_disable(prv->clk);
622 clk_put(prv->clk);
625 if (prv->csreg)
626 iounmap(prv->csreg);
629 static int mpc5121_nfc_probe(struct platform_device *op)
631 struct device_node *rootnode, *dn = op->dev.of_node;
632 struct device *dev = &op->dev;
633 struct mpc5121_nfc_prv *prv;
634 struct resource res;
635 struct mtd_info *mtd;
636 struct nand_chip *chip;
637 unsigned long regs_paddr, regs_size;
638 const __be32 *chips_no;
639 int resettime = 0;
640 int retval = 0;
641 int rev, len;
642 struct mtd_part_parser_data ppdata;
645 * Check SoC revision. This driver supports only NFC
646 * in MPC5121 revision 2 and MPC5123 revision 3.
648 rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
649 if ((rev != 2) && (rev != 3)) {
650 dev_err(dev, "SoC revision %u is not supported!\n", rev);
651 return -ENXIO;
654 prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL);
655 if (!prv) {
656 dev_err(dev, "Memory exhausted!\n");
657 return -ENOMEM;
660 mtd = &prv->mtd;
661 chip = &prv->chip;
663 mtd->priv = chip;
664 chip->priv = prv;
665 prv->dev = dev;
667 /* Read NFC configuration from Reset Config Word */
668 retval = mpc5121_nfc_read_hw_config(mtd);
669 if (retval) {
670 dev_err(dev, "Unable to read NFC config!\n");
671 return retval;
674 prv->irq = irq_of_parse_and_map(dn, 0);
675 if (prv->irq == NO_IRQ) {
676 dev_err(dev, "Error mapping IRQ!\n");
677 return -EINVAL;
680 retval = of_address_to_resource(dn, 0, &res);
681 if (retval) {
682 dev_err(dev, "Error parsing memory region!\n");
683 return retval;
686 chips_no = of_get_property(dn, "chips", &len);
687 if (!chips_no || len != sizeof(*chips_no)) {
688 dev_err(dev, "Invalid/missing 'chips' property!\n");
689 return -EINVAL;
692 regs_paddr = res.start;
693 regs_size = resource_size(&res);
695 if (!devm_request_mem_region(dev, regs_paddr, regs_size, DRV_NAME)) {
696 dev_err(dev, "Error requesting memory region!\n");
697 return -EBUSY;
700 prv->regs = devm_ioremap(dev, regs_paddr, regs_size);
701 if (!prv->regs) {
702 dev_err(dev, "Error mapping memory region!\n");
703 return -ENOMEM;
706 mtd->name = "MPC5121 NAND";
707 ppdata.of_node = dn;
708 chip->dev_ready = mpc5121_nfc_dev_ready;
709 chip->cmdfunc = mpc5121_nfc_command;
710 chip->read_byte = mpc5121_nfc_read_byte;
711 chip->read_word = mpc5121_nfc_read_word;
712 chip->read_buf = mpc5121_nfc_read_buf;
713 chip->write_buf = mpc5121_nfc_write_buf;
714 chip->select_chip = mpc5121_nfc_select_chip;
715 chip->bbt_options = NAND_BBT_USE_FLASH;
716 chip->ecc.mode = NAND_ECC_SOFT;
718 /* Support external chip-select logic on ADS5121 board */
719 rootnode = of_find_node_by_path("/");
720 if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
721 retval = ads5121_chipselect_init(mtd);
722 if (retval) {
723 dev_err(dev, "Chipselect init error!\n");
724 of_node_put(rootnode);
725 return retval;
728 chip->select_chip = ads5121_select_chip;
730 of_node_put(rootnode);
732 /* Enable NFC clock */
733 prv->clk = clk_get(dev, "nfc_clk");
734 if (IS_ERR(prv->clk)) {
735 dev_err(dev, "Unable to acquire NFC clock!\n");
736 retval = PTR_ERR(prv->clk);
737 goto error;
740 clk_enable(prv->clk);
742 /* Reset NAND Flash controller */
743 nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
744 while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
745 if (resettime++ >= NFC_RESET_TIMEOUT) {
746 dev_err(dev, "Timeout while resetting NFC!\n");
747 retval = -EINVAL;
748 goto error;
751 udelay(1);
754 /* Enable write to NFC memory */
755 nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
757 /* Enable write to all NAND pages */
758 nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
759 nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
760 nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
763 * Setup NFC:
764 * - Big Endian transfers,
765 * - Interrupt after full page read/write.
767 nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
768 NFC_FULL_PAGE_INT);
770 /* Set spare area size */
771 nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
773 init_waitqueue_head(&prv->irq_waitq);
774 retval = devm_request_irq(dev, prv->irq, &mpc5121_nfc_irq, 0, DRV_NAME,
775 mtd);
776 if (retval) {
777 dev_err(dev, "Error requesting IRQ!\n");
778 goto error;
781 /* Detect NAND chips */
782 if (nand_scan(mtd, be32_to_cpup(chips_no))) {
783 dev_err(dev, "NAND Flash not found !\n");
784 devm_free_irq(dev, prv->irq, mtd);
785 retval = -ENXIO;
786 goto error;
789 /* Set erase block size */
790 switch (mtd->erasesize / mtd->writesize) {
791 case 32:
792 nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
793 break;
795 case 64:
796 nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
797 break;
799 case 128:
800 nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
801 break;
803 case 256:
804 nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
805 break;
807 default:
808 dev_err(dev, "Unsupported NAND flash!\n");
809 devm_free_irq(dev, prv->irq, mtd);
810 retval = -ENXIO;
811 goto error;
814 dev_set_drvdata(dev, mtd);
816 /* Register device in MTD */
817 retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
818 if (retval) {
819 dev_err(dev, "Error adding MTD device!\n");
820 devm_free_irq(dev, prv->irq, mtd);
821 goto error;
824 return 0;
825 error:
826 mpc5121_nfc_free(dev, mtd);
827 return retval;
830 static int mpc5121_nfc_remove(struct platform_device *op)
832 struct device *dev = &op->dev;
833 struct mtd_info *mtd = dev_get_drvdata(dev);
834 struct nand_chip *chip = mtd->priv;
835 struct mpc5121_nfc_prv *prv = chip->priv;
837 nand_release(mtd);
838 devm_free_irq(dev, prv->irq, mtd);
839 mpc5121_nfc_free(dev, mtd);
841 return 0;
844 static struct of_device_id mpc5121_nfc_match[] = {
845 { .compatible = "fsl,mpc5121-nfc", },
849 static struct platform_driver mpc5121_nfc_driver = {
850 .probe = mpc5121_nfc_probe,
851 .remove = mpc5121_nfc_remove,
852 .driver = {
853 .name = DRV_NAME,
854 .owner = THIS_MODULE,
855 .of_match_table = mpc5121_nfc_match,
859 module_platform_driver(mpc5121_nfc_driver);
861 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
862 MODULE_DESCRIPTION("MPC5121 NAND MTD driver");
863 MODULE_LICENSE("GPL");